Professional Documents
Culture Documents
Clyde 15f2716 Manual B-737
Clyde 15f2716 Manual B-737
Clyde 15f2716 Manual B-737
OWNER'S MANUAL
B737 300-900
CLYDE MACHINES INC. P.O. BOX 194 GLENWOOD, MN 56334 TEL. (320) 634-4504 FAX. (320) 634 4506
WARRANTY
Clyde Machines Inc. warrants all goods of its manufacture to be free from defects caused by faulty material or poor workmanship and will at its option repair or replace, without charge, or allow credit for any such goods found on examination by Seller to be defective under normal use and service within one year from date of shipment to the Buyer, provided Seller is promptly notified in writing upon discovery of such defects. Goods shall not be returned to Seller or modified at Sellers expense without Sellers consent in writing. This warranty does not cover damage caused by improper use, installation, overloading, accident, neglect or harmful alterations or repairs made by others, weather conditions and acts of God. The Buyers remedies with respect to defective good shall be exclusively limited as above provider and in no event shall the Seller be liable for consequential damage. Components purchased by the Seller are subject to the warranty policy of the original equipment manufacturer, and Seller will assist the Buyer in resolving any warranty claims if such action is required.
Page 1
CLYDE MACHINES INC. P.O. BOX 194 GLENWOOD, MN 56334 TEL. (320) 634-4504 FAX. (320) 634 4506
INTRODUCTION This manual contains instructions for operating and maintaining Model TB-2716 Towbar manufactured by Clyde Machines, Inc. Glenwood, Minnesota. Illustrated breakdowns of all parts used in the towbar are included for identification of parts and parts ordering information. PREPARATION FOR USE Model TB-2716 has been designed for towing a B-737 aircraft. The towbar has been lubricated and adjusted at the factory and no additional preparation is required. A general inspection should be made to determine if any damage was sustained in transit. If any damage was sustained the transportation company should be notified immediately. OPERATING INTSTRUCTIONS To attach towbar to plane remove ball detent pin and lift lever back, this opens the head. After making connection close the head by pressing the lever back down. (Note: Replace ball detent pin, this locks the head in the closed position.) MAINTENANCE Every six months grease the axle lift pivots with the grease zerks provided. Annually the wheels should be removed and the hub bearings repacked with grease. PARTS ORDERING This illustrated parts manual completely identifies all detailed parts of the TB-2716 towbar. Orders will be filled promptly and accurately if the following information is provided. A. Preferred shipping date. B. Name, Address and Telephone number of person ordering parts. C. Name and Address where order is to be shipped. D. Name and Address of where invoice is to be mailed if different from above E. Preferred shipping instructions
Page 2
CLYDE MACHINES INC. P.O. BOX 194 GLENWOOD, MN 56334 TEL. (320) 634-4504 FAX. (320) 634 4506
F.
Model number and serial number of each unit parts are being Ordered for.
G.
Page 3
8 31 18 17 25 22 20 21 9 10 5 27 26 D 30 21
34 2 38 20 19 11 21 16 15 13 14
B 29 27
6 33
OPTIONS: ITEM NO. A B C D PART NUMBER 15F2491 15F2560 15F2424 15L22400 QTY. 1 1 1 1 DESCRIPTION PIN TYPE HEAD SPLICE ASSEMBLY AXLE LIFT ASSEMBLY STEEL TUBE
16
5 1
PAGE 5
4 15 3
12
14
13
10
11
7 1 5 2 9
HEAD ASSEMBY
ITEM NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 PART NUMBER QTY. 15W5532 15F2689 15W5483 15W5533 1503395 1505057 15L21976 1505058 15L10864 1501330 150309 150303 1501381 150298 1505838 1 1 1 1 2 1 1 1 1 2 1 2 2 2 1 737 HEAD WELD CAM ASSEMBLY HANDLE ASSEMBLY HANDLE WELD PLUNGER SPRING CARR LANE# CL-80-SPS-1 LEE SPRING # LC-042G-5 LOCKING PIN 1/8 X 5/8 ROLL PIN ROD ROLLER PIN 3/8 AN WASHER 1/4" WASHER 1/4 NF X LG. CS 1/4-28 NYLOK NUT HANDLE PLACARD PAGE 6 DESCRIPTION
2 1
ITEM NO.
PART NUMBER
QTY.
DESCRIPTION
15W5053
1505036
11
13
14
12 23
21 1
14
22
10 2
10
35
18
36
20 34
19 21 23 22 24 25 31
4 4 26 24 27 28
24
27
28 32 16 33 17 14 10 29 30 27 11 24 7 12
9 6 3 1
2 5
4 4
9 3 9 7 8
2 5
SPLICE ASSEMBLY
ITEM NO. PART NUMBER QTY. 1 2 3 4 5 6 7 8 9 15L21104 1504002 15L21102 15L21103 15L21101 1521109 150336 1502261 15W5234 1 TOWBAR TUBE (HEAD END) DESCRIPTION
16 3/4 NF x 1 1/2 C.S. 1 1 1 1 1 1 1 SPLICE CONNECTOR B TOW BAR TUBE(LUNETTE END) SPLICE CONNECTOR A PLACARD CASTLE NUT 3/32 X 2 1/4 COTTER CONNECTOR BOLT WELD PAGE 10
8 7 6 2
LUNETTE ASSEMBLY
PAGE 11
1 2
5 4
HUB ASSEMBLY
ITEM NO. PART NUMBER QTY. DESCRIPTION
1505570
1505571
WHEEL NUT
1505572
SEAL
1505573
DUST CAP
1505574
4 2
3 5 1
HUB ASSEMBLY
ITEM NO. 1 PART NUMBER QTY. DESCRIPTION
1505658
1505657
WHEEL BOLTS
1505655
BEARING CONE
1505654
GREASE SEAL
1505656
1 3 4 2 1 5
31
30 33 34 35 29 28
32 39
38 36 37 40
9 9 11 11 13 11 11 10 9
12
15 14 16 27 20 38 41 42 26 25 43 14 24 18 18 23 22 21 19 17
18
PAGE 15