Professional Documents
Culture Documents
04-Emission Control System
04-Emission Control System
Troubleshooting
DTC DETECTING CONDITION DTC No Detecting Condition & Limp Home Detecting Condition P0182: The output signal voltage < 0.15V P0183: The output signal voltage > 4.97V Limp Home Default value: 90C Fuel quantity limitation Suspect area
P0182 P0183
SPECIFICATIONS FTS Temperature Resistance 20C 2.27 ~ 2.73k Normal Parameter 40C 1.06 ~ 1.28k 60C 0.54 ~ 0.65k
SCHEMATIC DIAGRAM
SIGNAL WAVEFORM
INSPECTION PROCEDURES
DTC DETECTING CONDITION DTC No Detecting Condition & Limp Home Detecting Condition P0406 : Short circuit to power supply line. P0405 : Breaking of wire. P0402 : ( *Qt - *Qm) 320mg/stroke P0401 : ( *Qt - *Qm) -220mg/stroke *Qt : the target intake air quantity *Qm : the measured intake air quantity Limp Home None Suspected area
- Open or short in EGR solenoid valve circuit - EGR solenoid valve - Vacuum leakage - MAFS - ECM
SCHEMATIC DIAGRAM
SIGNAL WAVEFORM
INSPECTION PROCEDURES