Download as pdf or txt
Download as pdf or txt
You are on page 1of 1

Galvanized Steel Pipe Handrail and Rails for Stairs: 2inch (50mm) outside diameter standard steel pipe

Gap between bottom rail and stair max. 4 inches (100mm) Weld all joints. Weld mounting plates for each post. Bolt posts to stair structure min. 2 bolts per post. All metal fabricated and hot dipped galvanized before site assembly. All fasteners galvanized or stainless steel.

4ft ( 1219 mm) tread to top of railing

4 in (100mm) posts spacing 5ft max (1524mm)


Landing

Stair

Concrete Footings: See plan L-1 for existing concrete footing locations and notes. Existing and /or alternate footings may be installed by Contractor (i.e. helical pier). Landing Stair and Landing Structures: Galvanized Structural Steel Beams and Steel Posts. Minimum sizes assumed by Owner for bid purposes to be 12 inch beams, 4 inch diameter posts. Contractor responsible for provision of detailed shop drawings for Owner review and final approval prior to fabrication. Metal Stair Treads - see SK-3 Treads bolted at each end through steel beam structure.
STAIRS & STAIR HANDRAILS JORDAN STAIR REPLACEMENT
6/5/2012 3:24 PM
J:\Projects\Jordan Site\Twenty Valley Trail_Stair 2010\2012 Jordan Stair Tender\2012 Jordan Stair NPCA Tender.dwg

SK-5

You might also like