Professional Documents
Culture Documents
CFD-ZW755: 5-8. Schematic Diagram (CD Section)
CFD-ZW755: 5-8. Schematic Diagram (CD Section)
CFD-ZW755: 5-8. Schematic Diagram (CD Section)
CFD-ZW755
(PLAY MODE)
0.9 1.5Vp-p
IC701 ed (RFO)
(PLAY MODE)
0.6Vp-p
IC701 6 (FEO)
(PLAY MODE)
0.7Vp-p
IC701 rg (TEO)
4
1.6Vp-p
IC703 wl (PCO)
5
5Vp-p
22.85 sec
6
Note: All capacitors are in F unless otherwise noted. pF: F 50 WV or less are not indicated except for electrolytics and tantalums. All resistors are in and 1/4 W or less unless otherwise specified. Note: The components identified by mark 0 or dotted line with mark 0 are critical for safety. Replace only with part number specified. U : B+ Line. Power voltage is dc 9 V and fed with regulated dc power supply from battery terminal. Voltages and waveforms are dc with respect to ground under no-signal (detuned) conditions. no mark : STOP ( ) : PLAY Voltages are taken with a VOM (Input impedance 10 M). Voltage variations may be noted due to normal production tolerances. Waveforms are taken with a oscilloscope. Voltage variations may be noted due to normal production tolerances. Circled numbers refer to waveforms. Signal path. J : CD
2.3Vp-p
16.9344MHz
IC703 ua (XTAO)
37
38
39