Professional Documents
Culture Documents
A-6E Interior S.A
A-6E Interior S.A
A-6E Interior S.A
49 592
eduard
49 592
BEND OHNOUT
APPLY EXPRESS MASK AND PAINT BEFORE GLUING POUT EXPRESS MASK NABARVIT PRED SLEPENM
SYMETRICAL ASSEMBLY SYMETRICK MONT REMOVE ODSTRANIT GRIND OBROUSIT
FILL TMELIT
37
H29 = H36
9 80 67 74
H12
=
68
H28
74
= H44
1 40 39 51 46 38 52
90
H2 H11
65 47
2 81 41 82
64
58 85 57 78 77 84 28 79 79 3 42 86
86
H5
28
H5
8 6
2/4
49 592
2 pcs.
C3
13
C30
11
14 5 15
10
33 34
2 pcs.
26 21 22 22 19 23 53 27
C15
19, 27, 53
24 16 18 23 31 32 26 27
19,26,53
2 pcs.
62
61 17 29 54 12 49 25 75 56 61
60
44
73
= H3
48
30
3/4
49 592
83 87 88 83
H10, H42
76
43 35 20 36 45 59 50
H4
89 66 69
A1
91 70
A2
71 72
I1, I2
63
I9, I10
63 63
63
55
For further detail sets look for eduard 48 728 A-6E exterior (not included in this set) For further detail sets look for eduard 48 731 A-6 undercarriage (not included in this set) For further detail sets look for eduard 48 730 A-6 electronic equipment (not included in this set)
EDUARD M.A. 2012 www.eduard.com Made in Czech Republic
4/4
49 592
1.Samolepc dly oddlujte od rmeku na podkladovm pape. Po oddlen je sejmte z krycho papru.
4. Samolepc dly berte za hrany nebo za sti, na kterch nen nanesen lepidlo.
5. Lightly place the component in the desired location and position. Adjust as required. The component will be permanently affixed when pressed onto its intended location, its location can be adjusted.
2. Do not inadvertently place etched componets on an 5. Dl lehce polote do pozice, ve kter m bt nalepen. unwanted surface. Attempts to remove will result in Upravte pesnou pozici a pimknte. Dl dokonale pilne damage to your part. a po pimknut, ped pimknutm lze dlem opatrn 2. Nepokldejte samolepc dly na voln plochy. Pokud je omylem pilepte, pi pokusu o odlepen dojde k pokozen dlu.
manipulovat.