Professional Documents
Culture Documents
Pines Ir2110
Pines Ir2110
The IR2110 is high voltage, high speed power MOSFET and IGBT drivers with independent high and low side referenced output channels.
CIRCUIT DIAGRAM
IR2110S RATINGS :
OSCILLATOR CIRCUIT
Simulation circuit :
Simulation results:
1. Output from Jk flipflop as Frequency Divider :
Simulation results
Load here is 1k ohm
Percentage of pot used 55 Current in amps 0.097u Voltage in volts 0.094m
60 70 80 90 100
When the pot is at 100% , results obtained for various values of load.
Value of load 1k 10k 50k 75k Current in amps 0.114u 2.546u 0.047m 0.037m Voltage in volts 0.104m 0.027 2.254 2.709
100k
0.301m
2.961
HARDWARE IMPLEMENTATION:
RESULTS OBTAINED:
The output obtained across the resistor is an AC voltage waveform with a magnitude of 30V i.e., +15V and -15V. A capacitor is connected in parallel to the resistor in order to reduce the distortions.
DIFFICULTIES ENCOUNTERED:
IR2110 was not easy to work with as it had to be handled carefully while supplying Vcc. DC bus had to be supplied a voltage of 160 volts which led to the damage of ICs 555 timer had to be worked with care as it is prone to damage easily. To protect the ICs , control circuit and power circuit were isolated from each other .