The automatic deceleration system reduces engine speed to 1000 rpm after 4 seconds if all work equipment levers are neutral, cutting fuel use and noise during inactivity. When a lever is operated or the switch is pressed, engine speed returns to the previously set level within 1.5 seconds. With the auto decel lamp off, engine speed is not reduced even if levers are neutral, and the function only works above a certain accelerator dial position.
The automatic deceleration system reduces engine speed to 1000 rpm after 4 seconds if all work equipment levers are neutral, cutting fuel use and noise during inactivity. When a lever is operated or the switch is pressed, engine speed returns to the previously set level within 1.5 seconds. With the auto decel lamp off, engine speed is not reduced even if levers are neutral, and the function only works above a certain accelerator dial position.
The automatic deceleration system reduces engine speed to 1000 rpm after 4 seconds if all work equipment levers are neutral, cutting fuel use and noise during inactivity. When a lever is operated or the switch is pressed, engine speed returns to the previously set level within 1.5 seconds. With the auto decel lamp off, engine speed is not reduced even if levers are neutral, and the function only works above a certain accelerator dial position.
If all the work equipment control levers including swing and travel levers are at neutral for at least 4 seconds, CPU controller sends throttle command to ECU to reduce the engine speed to 1000rpm. As the result of reducing the engine speed, fuel consumption and noise are effectively cut down during non-operation of the control levers. When the Auto decel lamp is turned off by pressing the switch or any control lever is operated, the reduced engine speed rises upto the speed set before deceleration in a second.
Engine rpm
Accel dial set rpm
1000 rpm
4sec Lever neutral
Max 1.5sec
Max 1.5sec Lever operation Time
2107A5MS05
2. WHEN AUTO DECEL LAMP OFF
The engine speed can be set as desired using the engine speed switch, and even if the control levers are neutral, the engine speed is not reduced. Auto decel function can be activated when accel dial position is over 4.