Design changes mainly concentrated on making parts easy to machine (To reduce cost).
We divided some components in to multiple ones to reduce machining and material cost. (Ex. Flange Hub)
Made the center part of the fixture stable to remove a locking mechanism.
Change the size of the hex shaft to from 2 ¼ to a 2 inch.
-easier to find and cheaper (customer, OK)
-Increased the length of the shaft to get clearance for the robotic welder.
Change tacking fixture for rectangular tube part. To increase durability and to easy the assembly.
Redesign locking mechanism. Change spring type.
Design changes mainly concentrated on making parts easy to machine (To reduce cost).
We divided some components in to multiple ones to reduce machining and material cost. (Ex. Flange Hub)
Made the center part of the fixture stable to remove a locking mechanism.
Change the size of the hex shaft to from 2 ¼ to a 2 inch.
-easier to find and cheaper (customer, OK)
-Increased the length of the shaft to get clearance for the robotic welder.
Change tacking fixture for rectangular tube part. To increase durability and to easy the assembly.
Redesign locking mechanism. Change spring type.
Design changes mainly concentrated on making parts easy to machine (To reduce cost).
We divided some components in to multiple ones to reduce machining and material cost. (Ex. Flange Hub)
Made the center part of the fixture stable to remove a locking mechanism.
Change the size of the hex shaft to from 2 ¼ to a 2 inch.
-easier to find and cheaper (customer, OK)
-Increased the length of the shaft to get clearance for the robotic welder.
Change tacking fixture for rectangular tube part. To increase durability and to easy the assembly.
Redesign locking mechanism. Change spring type.