Professional Documents
Culture Documents
Seal Selection Chart For SNL: Series 2, 3, 5 & 6
Seal Selection Chart For SNL: Series 2, 3, 5 & 6
Series 2, 3, 5 & 6
L-seal
G-seal
V-ring seal
Labyrinth seal
Taconite seal
Internal conditions
Temperature Peripheral speed Misalignment Grease relubrication Oil lubrication Low friction Axial shaft displacement Vertical arrangement Replacement
TSN .. L
40 to +100 C 13 m/s 0,5 to 1
TSN .. G
40 to +100 C 8 m/s 0,5 to 1
3)
TSN .. A
40 to +100 C 12 m/s 7 m/s 1 to 1,5
2) 1)
TSN .. S
50 to +200 C
TSN .. ND
40 to +100 C 12 m/s
0,3
0,5
4 m/s
4)
External conditions
Dust Fine particulate contaminants Coarse particulate contaminants Abrasive contaminants Liquids when sprayed Direct sunlight
Very suitable Suitable
1) 2)
Limited suitability
Unsuitable
With axial support for the V-ring If used together with accessory set 3) If housing with grease escape hole is used (sufx V) 4) If the V-ring on the lower sealing is mounted on the inside