Professional Documents
Culture Documents
MA5600 Multi-Service Access Module Operation and Maintenance
MA5600 Multi-Service Access Module Operation and Maintenance
ISSUE 1.0
Objectives
Contents
quit
rip
interface
interface configuration mode MA5600(config-if-)# BTV BTV mode MA5600(config-btv)#
test
diagnose
By entering ? ,
MA5600#display? Key word matching MA5600#conf<space> ---- MA5600#configure Chinese/English language switching MA5600#Switch language mode Access history commands
Access the previous history command: "Ctrl +P" Access the next history command: "Ctrl +N"
Security Level: Internal
Contents
In-band Telnet: Occupying service channels Out-band Telnet: Occupying no service channel
Connect the computer serial port with the MA5300 Console via a
standard RS232 serial cable, then configure hyper terminal in Windows or other operation systems.
CON ETH MON ADEF SCU
MA5600
Open-Program-AccessoriesHypertrm. exe
Connection use:
Port setting:
Terminal type:
ETH
server
workstation
Telnet Terminal
workstation
LAN
ADEF
Telnet terminal
WAN
SCU LAN
MA5600
User login
Via Telnet
According to the prompt, enter correct user name and password to enter the configuration environment
Out-band NM configuration
MA5300(config)#interface meth 0
Enter the external network interface port mode.
MA5300(config-if-meth0)#undo shutdown
Activate the external network interface
S M B
SCU
Port
MA5600
HAB
MA5200
HRB
ethernet 0/7/0 on the MA5600s SCU board is connected to port 0 on the MA5200s HAB board. The IP address of the MA5600 inband NMS is 10.10.20.2/24. The NMS VLAN ID is 1000. The IP address of the NMS is 10.10.21.1/24 The IP address of the MA5200s VT interface is 10.10.20.254/24. The IP address of port 0 of the MA5200 HRB board is 10.10.40.1/30.
Confidential Information of Huawei. No Spreading without Permission. Security Level: Internal
MA5600(config)# snmp-agent community read public MA5600(config)# snmp-agent community write private
Set the community name and access authority
MA5600(config)#snmp-agent
target-host
trap
address
MA5600(config)#save
Board Management
Query a Board
MA5600#display board 0
MA5600#display board 0/2
Add a board(ADEF)
Confirm a Board
Delete a board Reset a Board
MA5600(config)#board confirm 0
MA5600(config)#board delete 0/2 MA5600(config)#board reset 0/1
Equipment management
MA5600(config)#reboot system
Setting hostname
MA5600(config)#sysname MA5600
Query the initial configuration of the MA5300 intelligent IP integrated access equipment
MA5600#display saved-configuration
Query the current configuration of the MA5300 intelligent IP integrated access equipment
MA5600#display current-configuration
MA5600#display unresumed-configuration
Save the current configuration Erase the configuration files in the Flash
MA5600#save MA5600#erase
flash data
Confidential Information of Huawei. No Spreading without Permission. Security Level: Internal
To add multiple virtual ports to a VLAN at a time, run the command multi-service-port. MA5600(config)#multi-service-port 3 adsl 0/2 3-10 rx-cttr 0 txcttr 0 (vlan-id 3, board 0/2 ,port range 3/10 )
Contents
CON
ETH MON
SCU
MA5600
MODEM
PC
MA5300(config-if-adsl-0/2)#chipset reset 1
Through the bit allocation information, you can get to know the
9 10 11 12 13
11 12 12 13 14
historic-15minutes 1
SCU
MA5600
MODEM
When operating in blocked state, an SHDSL port cannot transmit data, and any operation on the port is prohibited. To operate the port, you need to unblock the port first. MA5600(config-if-shdsl-0/1)#undo block all
Activate all ports on the board residing in slot 4 using profile 3. MA5600(config-if-shl-0/3)# activate all 3
Bind alarm profile 2 with all ports of the SHDSL board residing in slot 3. MA5600(config-if-shdsl-0/3)#alarm-config all 2
MA5600(config-if-shl-0/3)#display port state 0 -------------------------------------------------------------------Port Running Control Line ID Status Alarm Running Config Bind
Configure a Port's MAC Address Learning Attribute MA5600(config)#mac-address max-mac-count adsl 0/10/1 vpi 0
vci 35 10
Mode
----------------------------------------------0 1 ingress
-----------------------------------------------
(Mbps)
Control State
1 GE absence
1000
full
on
active offline
--------------------------------------------------------------------
Standard VLAN
Smart VLAN MUX VLAN
Super VLAN
QinQ VLAN Stacking VLAN
Contents
To establish the above connections, do as follows: Add VLAN 9 Run the command port vlan on MA5600_A to add a port on
MA5600-A
A D E F
0/7/0 0/7/1
SCU
A D E F
0/7/0 0/7/1
MA5600-B
SCU
1.Creating/Deleting a standard VLAN MA5600(config)#vlan 9 standard 2.Adding/Deleting a port to/from a standard VLAN MA5600(config)#port vlan 9 { frame/slot<S><3,4>|to<K> }:0/7 { portlist<S><1,256> }:0 MA5600(config)#port vlan 9 { frame/slot<S><3,4>|to<K> }:0/7 { portlist<S><1,256> }:1
Confidential Information of Huawei. No Spreading without Permission.
MA5600(config)#display vlan 9
VLAN ID: 9 VLAN attribute: standard Standard port number: 2 -------------------------F/ S/ P State
Upper network
1.Adding/Deleting a Smart VLAN 2.Adding/Deleting a port to/from a Smart VLAN 3.Displaying the information on a Smart VLAN ADSL link configuration
MA5600
User User User...User
ADEF
ADEF
vlan 20
MA5600(config)#vlan
{ smart<K>|vlanid<U><1,4000> |attrib<K>}:20 {vlantype<E><mux,standard,smart,super>|to<K> }:smart
MA5600(config)#vlan smart 20
{ vpi<K> }:vpi 0 vci 35
20.
MA5600(config)#service-port vlan 20 adsl 0/12/1 vpi 0 vci 35 rx-cttr 2
Add port 0-31on the ADSL board residing in slot 0/0 to VLAN 20 MA5600(config)# multi-service-port vlan 20 adsl 0/0 0-31 rxcttr 2 tx-cttr 2
After the above configuration, the PCs can visit Internet but can not ping each other.
Confidential Information of Huawei. No Spreading without Permission. Security Level: Internal
Add/Delete a service port to/from a MUX VLAN MA5600(config)# service-port vlan 10 adsl 0/1/0 vpi 0 rx-cttr 0 tx-cttr 0
Add all ADSL and SHDSL ports to MUX VLANs, with the first
port corresponding to VLAN 2. MA5600(config)#multi-service-port from-vlan 2 board 0-15 vpi 0 vci 35 rx-cttr 2 tx-cttr 2