Professional Documents
Culture Documents
Install Ma 5600
Install Ma 5600
reboot config
Username : root
Password : admin
MA5600>enable
MA5600#conf
Node
MA5600(config)#sysname MA5600-TPK-LAB
vlan-id Manage
MA5600-TPK-LAB(config)#vlan 43 standard
Total: 2
Native VLAN: 1
set vlan 1
MA5600-TPK-LAB(config)#display board 0/7
--------------------------------------Board Name
: H561SCU
Board Status
: Active normal
--------------------------------------There is no link-aggregation setting
Subboard[0]: H531O2GS
Subboard[1]: H531O4GS
Status: Normal
Status: Normal
Port
confirm board
MA5600-TPK-LAB(config)#display board 0
------------------------------------------------------------------------SlotID BoardName Status
SubType0 SubType1
------------------------------------------------------------------------0
H561SHEA Auto_find
1
H563ADGE Auto_find
2
3
4
5
6
7
H561SCU
Active_normal O2GS
O4GS
8
9
10
11
12
13
14
15
-------------------------------------------------------------------------
SCU ADSL G.
confirm confirm command
MA5600-TPK-LAB(config)#board confirm 0/0
MA5600-TPK-LAB(config)#board confirm 0/1
vlan Hinet
---------------------------------------------------------------------------0
1024
6
tag-pri
1
2496
6
tag-pri
2
512
0
tag-pri
3
576
2
tag-pri
4
64
4
tag-pri
5
2048
0
tag-pri
6
-0
tag-pri
---------------------------------------------------------------------------Traffic parameters for ATM service:
----------------------------------------------------------------------------
---------------------------------------------------------------------------Total Num
:
9
Traffic type definition:
1:NoTrafficDescriptor
2:NoClpNoScr
3:ClpNoTaggingNoScr
4:ClpTaggingNoScr
5:NoClpScr
6:ClpNoTaggingScr
7:ClpTaggingScr
8:ClpNoTaggingMcr
9:ClpTransparentNoScr
10:ClpTransparentScr
11:NoClpTaggingNoScr
12:NoClpNoScrCdvt
13:NoClpScrCdvt
14:ClpNoTaggingScrCdvt
15:ClpTaggingScrCdvt
----------------------------------------------------------------------------
1024
tag-pri
----------------------------------------------------------------------------
adsl profile
MA5600-TPK-LAB(config)#display adsl line-profile
{ <cr>|profile_index<L><1,1002> }:
Command:
display adsl line-profile
----------------------------------------------------------------------------Profile Profile
Operating Channel
Min Down Max Down Min Up
Max Up
Index
Name
Mode
Mode
Rate
Rate
Rate
Rate
----------------------------------------------------------------------------1 DEFVAL
All
Interleaved
32
6144
32
640
1000 ADSL LINE All
Fast
32
6144
32
640
PROFILE 10
00
1001 ADSL LINE All
Interleaved
32
6144
32
640
PROFILE 10
01
1002 ADSL LINE All
Interleaved
32
24544
32
1024
PROFILE 10
02
----------------------------------------------------------------------------Total:
5
Note :
The unit of rate is Kbps
MA5600-TPK-LAB(config)#adsl line-profile add 2
Start adding profile
Press 'Q' to quit the current configuration and new configuration will be
neglected
>Do you want to name the profile (y/n) [n]:y
>Please input profile name:ADSL2/1M
> Please choose default value type 0-adsl 1-adsl2+ (0~1) [0]:1
> Will you set basic configuration for modem? (y/n)[n]:
> Please select channel mode 0-interleaved 1-fast (0~1) [0]:0
> Will you set interleaved delay? (y/n)[n]:
>Please select form of transmit rate adaptation in downstream:
> 0-fixed 1-adaptAtStartup 2-adaptAtRuntime (0~2) [1]:
> Will you set SNR margin for modem? (y/n)[n]:
> Will you set parameters for rate? (y/n)[n]:y
> Minimum transmit rate in downstream (32~32000 Kbps) [32]:1024
> Maximum transmit rate in downstream (32~32000 Kbps) [24544]:2048
> Minimum transmit rate in upstream (32~6000 Kbps) [32]:512
> Maximum transmit rate in upstream (32~6000 Kbps) [1024]:1024
Add profile 5 successfully
Description Port
MA5600-TPK-LAB(config)#port desc 0/1/0 description TEST