Download as txt, pdf, or txt
Download as txt, pdf, or txt
You are on page 1of 1

If you see this warning message, that means you're trying to do any of the follo wing: 1.

You're trying to patch already patched DSDT with the main model-specific patc h. 2. You're trying to patch your vanilla DSDT, but you haven't selected the main m odel-specific patch. Please, run the ProBook Installer again and select correct DSDT options. If you want to make yourself a new patched DSDT, you should do the following: 1. Remove your current DSDT.aml. 2. Only for 4x40s models with Sandy Bridge CPU installed: copy Mini-SSDT-IMEI.am l from your desktop to /Extra and name it ssdt-1.aml, if you already have existi ng ssdt.aml or ssdt.aml, if you don't have such. 3. Reboot your laptop. 4. Run the ProBook Installer and select your DSDT options again. Note: for those of you with ProBook 47x0s (1600x900) or with ProBook 45x0s with 1080p screen mod, you won't be able to boot your system without DSDT.aml! Instead, you should do the following: 1. Remove your current DSDT.aml. 2.1 If you already have an /Extra/SSDT.aml installed (eg. you already ran the Pr obook Installer previously), copy Mini-SSDT-DualLink.aml from your desktop to /E xtra/ssdt-1.aml. 2.2 If you don't have an /Extra/SSDT.aml installed (eg. fresh install or ??? or you're doing this with Unibeast installer), copy Mini-SSDT-DualLink.aml from you r desktop to /Extra/ssdt.aml. 3. Only for 4x40s models with Sandy Bridge CPU installed: copy Mini-SSDT-IMEI.am l from your desktop to /Extra and name it ssdt-2.aml, if you have followed step 2.1 and ssdt-1.aml, if you have followed step 2.2. 4. Reboot your laptop. 5. Run the ProBook Installer and select your DSDT options again.

You might also like