Professional Documents
Culture Documents
Dispensing and Sampling Booth
Dispensing and Sampling Booth
Booths are designed to give mixed air flow stream for product, operator
and environmental protection and used to control the hazardous
emissions of dust powder during powder dispensing / sampling process.
0.3 micron downward air stream deflects air-borne dust away from the
operator breathing zone which is caused in handling operation. Dust
particle available is being filtered at three levels of filtration prior to being
circulated back to the booths air stream.
Applications :
Pre-Filters 10-15 micron rating, 3-Layers of HDPE mesh, 6mm Pressure Drop
Intermediaite Filters 3 micron & above, two layers of HDPE woven mesh and one layer
of Non-woven polyester Bondex Media, 9mm Pressure Drop,
Efficiency 97%
Supply HEPA Filters 99.97% efficiency @ 0.3 micron rating
Exhaust HEPA Filters 99.97% efficiency @ 0.3 micron rating
Blower Assembly Statically & Dynamically balanced DIDW type blower system
Special Features
Designed in accordance with WHO / GMP
?
3-Stage Filteration like Prefilter, Fine Filter, HEPA filter
?
Heavy duty Low noise motor blower assembly
?
Suitable to accommodate on floor & table balances
?
25