Professional Documents
Culture Documents
Minilab PDF
Minilab PDF
Minilab PDF
Updating your MiniLab firmware is a simple process that only takes a couple of minutes.
1. Go to http://www.arturia.com/evolution/en/products/MiniLab/resources.html 2. Scroll to the section labeled MIDI Control Center Update 3. Download the latest MIDI Control Center software version a. Choose the Mac or PC version based on your setup 4. Download the latest MiniLab Firmware file and save it to your hard drive to retrieve it later. 5. Connect your MiniLab to your computer via the USB connection. 6. Make sure that no other applications that use the USB MIDI ports are running. 7. Start the MIDI Control Center software. It will take about 5-6 seconds and it will find your MiniLab and display the current firmware version.
9. It will prompt you to disconnect your MiniLabs USB cable and then reconnect it while holding down the SHIFT button.
10. Click the OK button once you connected your MiniLab again. 11. Once you click the OK button, it will ask you to find the firmware file you downloaded.
12. Once you choose the file and press OPEN, it will be the update process.
14. Now shut down the MIDI Control Center Software. 15. Disconnect and reconnect your MiniLab. 16. You are now ready to go.
www.arturia.com