Huawei HS-SCCH

You might also like

Download as docx, pdf, or txt
Download as docx, pdf, or txt
You are on page 1of 2

Configuring 15 Codes per Cell By default, the number of HS-SCCH codes for each cell is 4.

If the default number is used, the HS-PDSCH can use only 14 SF16 codes. To enable the HS-PDSCH to use all 15 SF16 codes, Run the BSC6900 MML command MOD UCELLHSDPA to set the value of Code Number for HS-SCCH = 1

You might also like