Underwater Concrete: Product Description

You might also like

Download as pdf or txt
Download as pdf or txt
You are on page 1of 1

UNDERVATER CONCRETE

2011

Underwater concrete
Product description
Undervattensbetong r en betong avsedd att anvndas vid gjutning av oarmerade konstruktioner under vatten. Betongindustris undervattensbetong uppfyller de krav p sammansttning och egenskaper som stlls i Vgverkets BRONORM. Undervattensbetong levereras i hllfasthetsklass C 28/35, med cementhalterna 350 resp 400 kg/m3 och maximal stenstorlek 16 resp 27 mm. Undervattensbetong levereras normalt endast med cement Anlggningscement Std P (CEM I 42,5 N BV SR LA) och normalt ven med retarderande tillsatsmedel.
Areas of application Underwater pouring is used when pouring all types of non-reinforced underwater structures, mainly base plates surrounding temporary sheet piling that can afterwards be pumped dry, a sealing cake. In the case of pouring construction sections in accordance with the BRONORM standard, HydroBI must be used.

Characteristics
Underwater concrete has the following characteristics: - compression strength equivalent to at least strength classification C 28/35 - slump values on delivery to the construction site being normally 16 cm, 2 cm (S4) - is stable and cohesive, which reduces the risk of washout and sludge forming under water - flow properties that provide good filling of the casting mould.

Handling
Underwater concrete is normally applied by a concrete pump, whereby the discharge pipe has a nozzle valve in order to minimise the washout risk. Normally pouring begins with a cement level of 400 kg/m3 which after 5-10 m3 can be reduced to 350 kg/m3. The pouring ends with the surface layer being carefully vibrated to the necessary level.

BETONGINDUSTRI AB Head Office & Region Stockholm Liljeholmsvgen 30, Box 47312 SE-100 74 Stockholm Phone +46 8 625 62 00 Fax +46 8 625 62 99 www.betongindustri.se

Region South-West Fabriksvgen 2 SE-268 73 Billeberga Phone+46 418 47 56 10 Fax +46 418 43 13 33

Region North Krfltsvgen 3 SE-831 38 stersund Phone+46 63 10 40 75 Fax +46 63 12 34 90

Region East Regelgatan 7 SE-589 41 Linkping Phone +46 13 15 63 49 Fax +46 13 16 32 04

info@betongindustri.se

You might also like