Sony Kdl40s2010 Kdl26s200 Kdl32s30l1 Kdl32s3000 Kdl32xbr4 Kdl46s3000 Training Manual Inverterwarning LCD

You might also like

Download as pdf or txt
Download as pdf or txt
You are on page 1of 1

WARNING!

NEVER REMOVE THE SCREWS SECURING THE PLASTIC STRIP HOLDING THE LAMP SOCKETS. DAMAGE TO THE BACKLIGHT TUBES WILL OCCUR!

REMOVE CONNECTOR AND PULL BOARD TO THE RIGHT

REMOVE SCREWS SECURING SHIELD

SHIELD REMOVAL

INVERTER BOARD REMOVAL

Models Affected: KDL26S2000 KDL32S30L1 KDL32S3000 KDL32XBR4 KDL40S3000 KDL40D3000 KDL40S30L1 KDL46S3000
END VIEW
BACKLIGHT

SOCKET

Only remove the screws securing the inverter cover which may be metal or plastic. The remaining plastic strip contains sockets for the uorescent backlights and should never be loosened. The backlights will pop out of the sockets and/or break the backlight requiring a LCD panel replacement. The example shown is a 32 model but applies to all models.

You might also like