Professional Documents
Culture Documents
Untitled
Untitled
prong should not be over tight, it should rotate by hand 2)Insert the prong in the plug body without packing and punch a mark trough the equalizing holes 3)Insert the prong packing , but make sure that the metal wide ring with female grove on both ends should be on the spot of the punched mark 4)There will be Allen screw with a small plat on the grove below the fishing neck of the plug body, remove and you find a small pin in it remove it, otherwise the sliding sleeve will not move 5)Never try to grind the packing down as it will break easily while RIH