Professional Documents
Culture Documents
Mod12 1
Mod12 1
XLS
Module 12-1 Stress Concentration Factor for a Press Fit Disk on a Shaft with Bending
2.2
s = 1.0
0.8
l/d
Hub
d M
Shaft
d= 8.00 in Shaft diameter l = 10.00 in Hub thickness p= 3,620 psi Press fit pressure sbend nominal = 6,963 psi Nominal bend stress K= 1.62 Stress concentration factor sbend actual = 11,301 psi Actual stress Note: The approximation for K will have an error no larger than 5% over the range of the figure. Note: The underlying chart for this data requires that 0.0 < l/d < 1.3 and 0 < p/ s < 10