Professional Documents
Culture Documents
4000 Bell GII Eng
4000 Bell GII Eng
// PETROL
1|
FOR ASSEMBLY
REQUIRED ACCESSORIES
2| 3| The Bell 47 can also be used with a normal rotor head with flybar. The appropriate rotor head linkages are included in the rotor head kit. Existing rotor blades can be used.
PART NUMBERS
In addition to the fuselage kit, ORD.NO. 4000 the following is required:
Build plans can be downloaded from our web site, under Fuselages section
Rotor
GENERAL // Ord.No
1| Semi scale rotor head only use rotor blades Ord.No 419 2| Swashplate driver 10 mm 3| Scale rotor blades 1810 mm 4| Rotor blade pouch 702/75 68/20 419 33/55
4|
1|
2|
3|
4|
MECHANICS // PETROL
Ord.No
1| Petrol mechanics 90:18 1002/21 2| Petrol engine G240, 23 cc 1023 3| Silencer system 116/95 4| Control bridge For tail rotor on right side 5| Rotor shaft 10 x 214 mm 6| Pushrod 3.0 x 120 mm, 2pk 7| Fine-mesh petrol filter 8| Petrol fuel tubing 1m
100/30 35/30 70/121-2 830/68 830/83 1022/13 4321
PETROL
5|
6|
7| 8|
9|
10|
BELL 47 G II
Upto present day there are many full size Bell 47 helicopters flying, so there are many examples to base a model from. Our Bell 47 GII is a scale model, which is particularly suitable for scale detailing The cabin has a smoke tinted screen and has open door ways.
TECHNICAL DATA
SCALE LENGTH WIDTH HEIGHT ROTOR MOTOR WEIGHT 1:5,9 1660 mm 310 mm 500 mm 1810 mm 23 cm3 ca.7,5 kg 1| 3| 4| 5| 6| 7|
SCALE
2|
16