Professional Documents
Culture Documents
Name of The Component Range Type Quantity: Aim: Maximum Power Transfer
Name of The Component Range Type Quantity: Aim: Maximum Power Transfer
Name of The Component Range Type Quantity: Aim: Maximum Power Transfer
AIM:
To verify maximum power transfer theorem and to find the current through load resistance & load resistance. APPARAT ! R"# IR"$:
s.no
'.
Range
Type
2 2 2 2 mc 2 2 2 2
&uantity
2 2 2 2 ' ( ( few '
(. ). *. +. ,.
012)13mA 2 012)13v 2 2
Maximum power transfer theorem: 4The maximum power transfer theorem states that maximum power is delivered from a source to a load when the load resistance is e&ual to the source resistance and assumes that the load resistance is varia.le5
(. The rps is switched on. ). The measured the ohms .y used multimeter and the readings are noted in the ta.ular column.
To measure I6:
'. /onnections are made as per the circuit diagram.
(. The rps is switched on. ). The measured the load current .y used ammeter and the readings are noted in the ta.ular column.
/ircuit diagram:
: (1; 2
((1 7 A R6
+'7 -
'( 7
(81 7
To find RT9:
+' 7 : (1; 2 ((1 7
'( 7
(81 7
To Find Vth
+' 7 012 3; A '( 7 ; (81 7
: (1; 2
((1 7
To find IL
R T9 ;T9 012 3mA A < 2 2 < < <
R6
TABULATION
PARAMETER Vth Rth IL THEORITICAL VALUE PRACTICAL VALUE