Professional Documents
Culture Documents
Rothoblaas - Ab7.technical Data Sheets - en
Rothoblaas - Ab7.technical Data Sheets - en
Rothoblaas - Ab7.technical Data Sheets - en
The strength values are calculated according to the Design Method A (ETAG001). The values indicated refer to anchors installed respecting the distances indicated in the table. For small distances apply the ETA reduction coefficients LEGEND h1 = Minimum hole depth hef = Anchor depth tfix = Thickness of object to be fastened Lt = Anchor length f = Thread length Ch = Spanner Tinst = Tightening torque do = Hole diameter = bit diameter d = Anchor diameter = hole diameter hmin = Min. thickness of concrete support Cmin = Distance from edge Smin = Min. centre distance
145