Professional Documents
Culture Documents
CAP10 - Gli Scettici Antichi
CAP10 - Gli Scettici Antichi
CAP10 - Gli Scettici Antichi
Eventually I had to accept that the illuminator had deviated from this method and that his motivation for doing so was in the best artistic tradition. He must have realised that by following common practice the width of the borders would have dimished the size of the smaller units of the pattern such that their original shape was entirely lost. His solution was to lay the border such that the construction line lay along the edge of the border (see Figure 2)
www.geometricdesign.co.uk/perfect.htm
1/3
22/11/13
He thus preserved the integrity of the unit shape (see Figures 3 and 4) but sacrificed the perfection of the pattern as a whole. This, in turn affected all adjacent units of the pattern which also had to be adjusted, resulting in a pattern that deviates significantly from the geometric original.
This is where 'art' supercedes geometry and it is practised by the Islamic designer as often as any other - and he knows it. Thus we have one example where there is no need for the artist to include a deliberate error. He already knows that his work is not perfect. Having illustrated the deliberate distortion of geometry for an artistic purpose let us move on to some examples of the departure from natural geometry which are derived from a less benign influence. An imperfection is sometimes just an error, not a homage to a deity.
In his book 'The Quranic Art of Calligraphy and Illumination', Martin Lings notes in reference to an illustration of part of the frontispiece to a Royally commissioned Quran that 'the manuscript should be used as a model for copying' (Plate 54, page 119). Examination of this plate (see the extract at Figure 5) reveals that the draughtsman has drawn 14 points at the centre of the design which is otherwise based on a 12 sided polygon. There is even evidence that he has recognised the mistake and attempted to cover it up but in the end he has incorporated the 14 points into a floral motif of some complexity, thereby largely concealing the incongruity. Whilst this would Figure 5 almost certainly pass without notice in general, anyone attempting to use this illustration as a model will quickly recognise the lack of symmetry.
www.geometricdesign.co.uk/perfect.htm
2/3
22/11/13
Even if we were to assume that this error was deliberate there is a second, even clumsier mistake in this illumination. Observe the circled section in Figure 6 and compare it to the equivalent section on the other side. It should be plain, even to the inexperienced eye, that they are not mirror images of each other as one would expect. In fact one arc has been drawn between the wrong pair of points.
Figure 6
So, what do we make of this. The artist has been commissioned by an extremely powerful patron who expects the best possible work from his subject. Did the artist merely draw the piece and then hand it to an apprentice to complete? And what would have been his reaction on seeing the blemished product, with perhaps only hours to go before the deadline? He could always assume that with such a complex design no one but a fellow illuminator would notice, but just in case his master was more than a mere amateur in such matters, he might need a fall back position. What better idea than that of a deliberate error?
www.geometricdesign.co.uk/perfect.htm
3/3