Download as doc, pdf, or txt
Download as doc, pdf, or txt
You are on page 1of 5

Advertise your Business

Browse | Placement Papers | Company | Code Snippets | Certifications | Vis


Questions
Post Question | Post Answer | My Panel | Search | Articles | Topics | ERRORS new

Refer this Site Login | Sign Up


Ask Questions on ANYTHING, that arise in your Daily Life at FORUM9.COM
Categories >> Engineering >> Electrical Engineering

Correct ?
Civil
Engineering
Interview Questions Re: What is the Difference Between MCCB & ACB & VCB
Answer MCCB-MOULDED CKT BREAKER USED FOR LT 0 Harikishan
Mechanical # 15 SIDE
Chaturvedi
Engineering ACB-AIR CKT BREAKER USED FOR LT SIDE
Interview Questions VCB-VACCUME CKT BREAKER USED FOR HT SIDE

Electrical Is This Answer Correct ? 9 Yes 2 No


Engineering
Interview Questions
Re: What is the Difference Between MCCB & ACB & VCB
Electronics
Answer MCBs are miniature circuit breakers with 0 Rabindra
Communications optimum protection
# 16 Dhungana
Interview Questions facilities of overcurrent only.These are
manufactured for
Chemical fault level of up to 10KA only with
Engineering operating current range
Interview Questions of 0.5 to 63 Amps (the ranges are
fixed), single,double and
Aeronautical three pole verson.These are used for
Engineering smaller loads
-electronic circuits,house wiring etc.
Interview Questions MCCBs are Moulded case Circuit
breakers,with protection
Bio Engineering facilities of overcurrent, earth
Interview Questions fault.it has a variable
range of 50% to 100% operating
Metallurgy current.They can be wired for
Interview Questions remote as well as local operation
both.They are manufactured
Industrial for fault levels of 16KA to 50KA and
Engineering operating current range
Interview Questions of 25A to 630Amps.They are used for
aplication related with
Instrumentation larger power flow requirement.
Interview Questions
Is This Answer Correct ? 2 Yes 7 No
Engineering
AllOther Interview
Questions Re: What is the Difference Between MCCB & ACB & VCB
Answer MCCB---- For Lower Operating Currents & 0 Sri.....
# 17 Use And Throw
Technology.(in india generally up to
Other Electrical Engineering Interview Questions

Question Asked @ Answers

In A.C systems, fuse is placed in phase-in order to disconnect


the circuit during faulty condition. But, what is the reason for
2
putting "LINK" in neutral istead of connecting through (same)
wire.
WHICH IS BETTER( FOR POWER SAVING)- ON LINE OR Punjab-National-
3
OFF LINE UPS ? Bank
What are difference between earthing switch and earthing
truck ? What is the operation philoshopy of earthing truck ? Wht Reliance 1
are the component of earthing truck ?
check list of maintenance of transformer? Godrej 3
2 Diesel Generators 900KVA connected to the bus bar for
essential load as an alternative for power taken from 11/440V
3KVA Transformer supplying this bus bar. my question here is
3
in the event of power failure on 11KV side can I feed the power
to 11 KV bus by using the same transformer as reverse feed,
what will be the inrush current???
How to convert resistance value at 20 degree to 90 degree? 2
What is a liquid resistance starter?where it is used?? Mecon 1
wat is syncronization . wat parameter will take for
2
syncronization.
11kv/0.433kv, 2 mva , transformer , for protection and metering
Bhilai 19
how many CT/PT are required?
WHAT DO U MEAN BY THERMAL OVER LOAD RELAY&
L&T 2
WHERE THEY ARE BUSED
how Practicaly reduce stating current of the motor 2
Is there any problem ,if R-Y-B voltage is constant , but the air
compressor taking one phase high current.what is possible 1
causes.the said compressor is very new.(55kw).
how to calculate generator capacity?(kva) 2
What is the operating range(tolerance) of voltage and frequency
BARC 3
of grid supply in india?
how many amps in 1 KVA? V=440v, PF=0.8 and FREQ=50Hz 11
what is the method of electric earth for the protection of low
Siemens 1
voltage electric equipment
How we find the size of cable if we know the current 2
why neutral used in three phase motor connection? BEL 1
What is the working of Field winding in dc motor, in which part
2
is it work or why ?
Give the two basic speed control of DC shunt motor. 3
Copyright Policy | Terms of Service | Help | Site Map 1 | Articles | Site Map |
Site Map | Contact Us |

Copyright © 2007 ALLInterview.com. All Rights Reserved.


ALLInterview.com :: Forum9.com :: KalAajKal.com

You might also like