Professional Documents
Culture Documents
Pelatihan Pilot: Maskapai Penerbangan Pelatihan Top Sekolah Penerbangan
Pelatihan Pilot: Maskapai Penerbangan Pelatihan Top Sekolah Penerbangan
Pelatihan Pilot: Maskapai Penerbangan Pelatihan Top Sekolah Penerbangan
http://www.efunda.com/processes/machining/drill_ream.cfm
Reaming
Directory | Career | News | Standards | Industrial | SpecSearch
Materials
Design
Processes
Units
Formulas
Math
pelatihan pilot
www.epicflightacademy.com maskapai penerbangan pelatihan top sekolah penerbangan Reaming: Summary
Reaming is a process which slightly enlarges a pre-existing hole to a tightly toleranced diameter. A reamer is similar to a mill bit in that it has several cutting edges arranged around a central shaft, as shown below. Because of the delicate nature of the operation and since little material is removed, reaming can be done by hand. Reaming is most accurate for axially symmetric parts produced and reamed on a lathe.
1 of 2
1/2/2014 5:26 PM
Reaming
http://www.efunda.com/processes/machining/drill_ream.cfm
Machining
made-in-china.com China Machining Supplier High Quality, Competitive Price.
As with a drilled hole, clearance for chips is needed at the bottom of a reamed hole. This is illustrated below:
Reaming should not be relied upon to correct the location or alignment of a hole. Its primary purpose is to fine-tune the diameter of the hole.
Top of Page
Home Membership About Us Privacy Disclaimer Contact Advertise Copyright 2014 eFunda, Inc.
2 of 2
1/2/2014 5:26 PM