Professional Documents
Culture Documents
"Wearable Zigbee Based Guidance System For Blind": Guided By: Remya K V
"Wearable Zigbee Based Guidance System For Blind": Guided By: Remya K V
ANAS P A [ AMAKEEE003]
ANJU JOSE VITHAYATHIL [AMAKEEE005] ARJUN C [AMAKEEE007] ATHIRA C R [AMAKEEE010] SIDHEEQUL AKBAR P[AMAKEEE054]
OBJECTIVE
Combined scheduling of ultrasound and GPS in a wearable zigbee based guidance system for the blind.
BLOCK DIAGRAM:
POWER SUPPLY
BLOCK DIAGRAM:
SCHEMATIC DIAGRAM:
TRANSFORMER:
(0-230V) to (0-9V).
RECTIFIER:
FILTER:
IC REGULATOR:
We uses IC 7805.
LCD
Pin Description: Pin No 1 2 3 4 Function Ground (0V) Supply voltage; 5V (4.7V 5.3V) Contrast adjustment; through a variable resistor Selects command register when low; and data register when high 5 6 7 8 9 10 11 12 13 14 15 16 Backlight VCC (5V) Backlight Ground (0V) 8-bit data pins Low to write to the register; High to read from the register Sends data to data pins when a high to low pulse is given Read/write Enable DB0 DB1 DB2 DB3 DB4 DB5 DB6 DB7 Led+ LedName Ground Vcc VEE Register Select
ATMEGA162V
B L O C K
D I A G R A M
GPS
Third generation POT. Provides standard NMEA0183 strings in raw mode for any micro controller. High sensitivity and tracking capabilities .
SPECIFICATIONS:
Supply: 3.3V, 45mA. Chipset: MTK MT3318. Protocol message support: GGA, GSA, RMC, VTG. No. of Satellite simultaneously tracked: 51. Tracking Sensitivity: On-module antenna : -157 dBm.
RS232
Schematic Description:
RS-232 is a standard for serial binary data interconnection between a DTE (Data terminal equipment) and a DCE (Data Circuit-terminating Equipment).
ULTRASONIC SENSOR
Features Supply Voltage 5 VDC Supply Current 30 mA typ; 35 mA max Range 2 cm to 3 m (0.8 in to 3.3 yrds) Input Trigger positive TTL pulse, 2 uS min, 5 s t yp. Echo Pulse positive TTL pulse, 115 uS to 18.5 ms Echo Hold-off 750 s from fall of Trigger pulse
CIRCUIT DIAGRAM
CONCLUSION
Studied the block diagram. Designed the circuit diagram. Detailed study of components.