Professional Documents
Culture Documents
TTV
TTV
The throttle/brake servo is mounted on top of the centre differential housing, as shown in the following picture.
Tape
Please also refer to the instructions and safety precautions in the owner's manual of your radio control.
Step 1: Set the carburetor throttle valve to the idling position Step 2: Shut the choke lever (C) at the carburetor Step 3: Press the pump (P) at the carburetor until it is filled with fuel Step 4: Slowly pull out the pull starter (S) until you feel a first resistance, then pull strongly until the engine ignites audible. Normally the engine will stop again after this first ignition. Step 5: Now open the choke lever (C) and pull the pull starter (S) once again until the engine runs.