Professional Documents
Culture Documents
Huawei Antenna & Antenna Line Products Catalogue 2012
Huawei Antenna & Antenna Line Products Catalogue 2012
Huawei Antenna & Antenna Line Products Catalogue 2012
Huawei's SG128 spherical near eld testing system - the world's most advanced antenna testing system:
High-performing ultra-broadband dual-polarization probes Five-axis precision turret for military use (can be rotated with 0.01 degree precision) Albatross high-performing shielded room from Germany AEMI radar absorbing materials from the US Precise and stable equipment imported from industry-leading countries Infrared laser for calibration and dedicated installation support Full series of installation poles Industry-leading temperature control technology
+70
16h
-55C/+70C
5cycles,50h
+25C/+55C @ 95% RH
10cycles,240h
Wind Loading
IEC 72134
Simulated constant force of Visual/physical exam VSWR 3surfaces,144h 200 km/h wind ISO and PIM (pre and post) sinusoidal 6.15mm,10m/ s2,2-9HZ 9HZ-200HZ Truck level 3 3axes5 sweep cycles 3 axes,90min Visual/physical exam VSWR ISO and PIM (pre and post) Visual/physical exam VSWR ISO and PIM (pre and post) Visual/physical exam VSWR ISO and PIM (pre and post) Visual/physical exam VSWR ISO and PIM (pre and post) Visual/physical exam VSWR ISO and PIM (pre and post) Visual/physical exam VSWR ISO and PIM (pre and post)
Vibration Transportation Vibration Shocks(without package) shocks (with package) Drop (with package)
72s
72s
ISO 12048
6surfaces/4Angles/3Edges
13 drops
Rain ETSI 300 01924 IEC 60068218 (in water chamber) Wind Driven Rain Salt Fog (Continuous) Salt Fog (Cyclic) Solar (UV) Exposure Dust and sand GR487CORE MILSTD810 Method 506.3
0.067m3/min,5r/min 150mm/h,31m/s,0.5mm4.5mm,45 5%NaCl mist @+40C 5%NaCl mist @+15/+40C,93% RH 1120W/s2 @+40C 150um-850um,1g/m3,20m/ s @+70C,RH<30%
2h
4surfaces,more Visual/physical exam VSWR than 120min ISO and PIM (pre and post) 1000h Visual/physical exam VSWR ISO and PIM (pre and post) Visual/physical exam VSWR ISO and PIM (pre and post) Visual/physical exam VSWR ISO and PIM (pre and post) Visual/physical exam VSWR ISO and PIM (pre and post)
Contents
Product Portfolio
A. Huawei Network Antennas
A1. Single Band Antennas A2. Dual-band Antennas A3. Triple-band Antennas A4. Quad-band Antenna A5. WIMAX, LTE Antennas A6. Cluster Antenna
D. Mounting Instructions
D1. Antenna Installation Guide D2. DTMA Installation Guide D3. Combiner Installation Guide D4. RCU Installation Guide D5. BT Installation Guide D6. SBT Installation Guide
nt Co en ts
Index
A. Huawei Network Antennas
A1. Single Band Antennas
Frequency 3dB Horizontal Polarization Range (MHz) beam width () Gain (dBi) Electrical Tilt downtilt () Method Connector Dimension (mm) Model Page
450470 450470 790960 790960 790960 790960 790960 790960 790960 790960 806960 806960 806960 806960 806960 806960 806960 806960 806960 806960 806960 806960 806960 806960
** Preliminary Issue
x x x x x x x x x x x x x x x x x x x x x x x x
360 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 90 90 65 65 65 65
FET FET MET MET FET FET FET MET FET FET FET FET FET FET FET FET FET FET FET MET MET FET FET FET
1 x 7/16 DIN Female 2 x 7/16 DIN Female 2 x 7/16 DIN Female 2 x 7/16 DIN Female 2 x 7/16 DIN Female 2 x 7/16 DIN Female 2 x 7/16 DIN Female 2 x 7/16 DIN Female 2 x 7/16 DIN Female 2 x 7/16 DIN Female 2 x 7/16 DIN Female 2 x 7/16 DIN Female 2 x 7/16 DIN Female 2 x 7/16 DIN Female 2 x 7/16 DIN Female 2 x 7/16 DIN Female 2 x 7/16 DIN Female 2 x 7/16 DIN Female 2 x 7/16 DIN Female 2 x 7/16 DIN Female 2 x 7/16 DIN Female 2 x 7/16 DIN Female 2 x 7/16 DIN Female 2 x 7/16 DIN Female
A45VP0900 A45451500
2 3 4 5 7 9 11 13 15 17 19 20 21 22 23 24 25 26 28 29 30 31 32 33
1356 x 259 x 135 **A79451500v01 1936 x 259 x 135 1936 x 260 x 135 1936 x 260 x 135 1936 x 260 x 135 2535 x 259 x 135 2535 x 259 x 135 2535 x 259 x 135 1322 x 289 x 85 1322 x 289 x 85 1322 x 289 x 85 1312 x 295 x 126 1312 x 295 x 126 1932 x 289 x 85 1932 x 289 x 85 2526 x 268 x 125 2526 x 268 x 125 2526 x 268 x 125 2515 x 289 x 85 2572 x 289 x 85 2572 x 289 x 85 2572 x 289 x 85 A79451600v01 A90451702v01 A90451705v01 A90451709 A79451700v01 A90451802v01 A90451805v01 A90451500 A90451501 A90451505 A90451502 A90451503 A90451700 A90451705 A90451706 A90451600 A90451704 A90451701 A90451800 A90451805 A90451801
In
de
Gain (dBi)
Connector
Dimension (mm)
Model
Page
806960 17102170 17102170 17102170 17102170 17102170 17102170 17102170 17102170 17102200 17102200 17102200 17102200 17102200 17102200 1710-2200 17102200 17102200 17102690 17102690 17102690
** Preliminary Issue
x x x x x x x x x x x x x x x x x x x x x
65 90 90 90 65 33 33 65 65 65 65 65 65 65 65 65 65 65 65 65 65
FET MET FET FET FET MET FET FET FET MET FET FET MET IRET FET FET FET MET MET IRET MET
2 x 7/16 DIN Female 2 x 7/16 DIN Female 2 x 7/16 DIN Female 2 x 7/16 DIN Female 2 x 7/16 DIN Female 2 x 7/16 DIN Female 2 x 7/16 DIN Female 2 x 7/16 DIN Female 2 x 7/16 DIN Female 2 x 7/16 DIN Female 2 x 7/16 DIN Female 2 x 7/16 DIN Female 2 x 7/16 DIN Female 2 x 7/16 DIN Female 2 x 7/16 DIN Female 2 x 7/16 DIN Female 2 x 7/16 DIN Female 2 x 7/16 DIN Female 2 x 7/16 DIN Female 2 x 7/16 DIN Female 2 x 7/16 DIN Female
2532 x 295 x 126 1306 x 155 x 79 1306 x 155 x 79 1306 x 155 x 79 1306 x 155 x 79 1318 x 289 x 85 1318 x 289 x 85 2170 x 155 x 79 2170 x 155 x 79 730 x 155 x 89 702 x 155 x 89 702 x 155 x 89 1315 x 155 x 89 1315 x 155 x 89 1311 x 155 x 89 1311 x 155 x 89 1311 x 155 x 89 1954 x 155 x 89 1410 x 155 x 89 1425 x 155 x 89 1932 x155 x 89
A90451804 A19451703 A19451704 A19451705 A19451801 A19452101 A19452102 A19452100 A19452103 **A19451505 A19451601 A19451602 A19451811 **A194518R0 A19451800v01 A19451810v01 A19451802v01 A19451902 A26451800 **A264518R0 A26451900
34 35 36 38 40 41 42 43 44 45 46 48 50 52 54 56 58 60 62 64 66
xx xx xx
68 70 72
In de x
Gain (dBi)
Connector
Dimension (mm)
Model
Page
790960/ 17102180 790960/ 17102180 790960/ 17102180 790960/ 17102180 790960/ 17102180 790960/ 17102690 790960/ 17102690 824960/ 17102170 824960/ 17102170 824960/ 17102170 824960/ 17102170 824960/ 17102170 824960/ 17102170 17102200/ 17102200 17102200/ 17102200 17102200/ 17102200 17102690/ 17102690 17102690/ 17102690 17102690/ 17102690
** Preliminary Issue
xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx
65/65 65/65 65/65 65/65 65/65 65/65 65/65 65/65 65/65 65/65 65/65 65/65 65/65 65/65 65/65 65/65 65/65 65/65 65/65
16/18.5 16/18.5 17/18.5 17/18.5 17/18.5 16/18.5 17/18.5 15/18 15/17.5 16/17.5 16/18 17/17.5 17.5/18 18/18 18/18 19.5/19.5 18/18 16/16.5 19.5/19.5
012/ 08 012/ 08 010/ 08 010/ 08 010/ 08 010/ 08 010/ 08 014/ 08 014/ 08 08/ 08 08/ 08 08/ 08 010/ 08 010/ 010 010/ 010 06/ 06 010/ 010 012/ 012 06/ 06
MET IRET MET IRET MET MET MET MET MET MET MET MET MET MET IRET MET MET IRET MET
4 x 7/16 DIN Female 4 x 7/16 DIN Female 4 x 7/16 DIN Female 4 x 7/16 DIN Female 2 x 7/16 DIN Female 4 x 7/16 DIN Female 4 x 7/16 DIN Female 4 x 7/16 DIN Female 2 x 7/16 DIN Female 2 x 7/16 DIN Female 4 x 7/16 DIN Female 2 x 7/16 DIN Female 4 x 7/16 DIN Female 4 x 7/16 DIN Female 4 x 7/16 DIN Female 4 x 7/16 DIN Female 4 x 7/16 DIN Female 4 x 7/16 DIN Female 4 x 7/16 DIN Female
1936 x 259 x 135 1940 x 259 x 135 2535 x 259 x 135 2535 x 259 x 135 2535 x 259 x 135 1995 x 298 x 148 2598 x 298 x 148 1390 x 368 x 99 1390 x 368 x 99 1925 x 368 x 99 1925 x 368 x 99 2449 x 368 x 99 2449 x 368 x 99 1315 x 323 x 89 1315 x 323 x 89 1954 x 323 x 89 1410 x 299 x 89 1425 x 323 x 89 1930 x 299 x 89
ADU451602v01 **ADU4518R3 ADU451807v01 **ADU4518R0 **ADU4518C0 **ADU451604 **ADU451712 ADU451815 ADU451707 ADU451811 ADU451806 ADU451700 ADU451801 ADU451819 **ADU4518R1 ADU451902 ADU451816 **ADU4518R6 ADU451901
xxx
65/65/65
15.5/16/18.5
xxx
65/65/65
15/15/15
xxx
65/65/65
16/16/16
IRET
**ATR4518R2
MET
6 x 7/16 DIN 1454 x 259 x 135 Female 6 x 7/16 DIN 2098 x 259 x 135 Female
ATR451500
MET
ATR451602v01
In
de
Gain (dBi)
Connector
Dimension (mm)
Model
Page
790960/ 17102180/ 17102180 790960/ 17102180/ 17102180 790960/ 17102180/ 17102180 790960/ 17102690/ 17102690 824960/ 17102170/ 17102170 824960/ 17102170/ 17102170 17102690/ 17102170/ 24902690
** Preliminary Issue
xxx
65/65/65
16/16/16
xxx
65/65/65
17/17/17
xxx
65/65/65
17/17/17
xxx
65/65/65
16/18.5/18.5
xxx
65/65/65
16.5/16.5/16
xxx
65/65/65
17.5/17.5/17
xxx
65/65/65
18/18/18
012/ 012/ 012 010/ 010/ 010 010/ 010/ 010 010/ 08/ 08 08/ 08/ 08 08/ 08/ 08 010/ 010/ 010
IRET
6 x 7/16 DIN 2100 x 259 x 135 Female 6 x 7/16 DIN 2685 x 259 x 135 Female 6 x 7/16 DIN 2685 x 259 x 135 Female 6 x 7/16 DIN 1950 x 349 x 148 Female 6 x 7/16 DIN Female 6 x 7/16 DIN Female 6 x 7/16 DIN Female 1925 x 368 x 99
**ATR4516R0
MET
ATR451704v01
IRET
**ATR4517R0
IRET
**ATR4518R4
MET
ATR451601
MET
2449 x 368 x 99
ATR451703
IRET
1410 x 323 x 89
**ATR4518R3
xxxx
65/65/65/65
16/18.5/ 18/18
IRET
**AQU4518R0
129
** Preliminary Issue
x xx
60 65/65
18 18/18
210 210
MET MET
2 x N50KF 4 x N50KF
A25451804 A25451803
131 132
17102690
** Preliminary Issue
65
18
010
MET
1425 x 236
**A264518S0
133
In de x
B2. Combiners
Pass Band (MHz) Band 1 : 698960 Band 2 : 17102700 Band 1 : 7901880 Band 2 : 19202200 Band 1 : 790862 Band 2 : 880960 Band 1 : 17101880 Band 2 : 19202200 Band 1 : 1710 - 1880 Band 2 : 19202200 Band 1 : 17101880 Band 2 : 19202200
** Preliminary Issue
Max. Input power (W) 300 300 300 300 200 200 300 300
DC-Bypass 17102700MHz DC-bypass 17102700MHz DC-bypass 880960MHz DC-bypass 19202200MHz DC-bypass 17101880MHz DC-bypass 19202200MHz DC-bypass 19202200MHz DC-bypass
Model ACOMD2H00
Page
Double Unit: 190 x 154 x 105 Double Unit: 180 x 210 x 107 Double Unit: 160 x 154 x 103
300 300
< -117
ACOMD2H07
165
300 300
< -110
ACOMD2H06
168
In
de
Pass Band (MHz) Band 1 : 17101880 Band 2 : 19202200 Band 1 : 790862 Band 2 : 880960 Band 1 : 698960 Band 2 : 17102200 Band 1 : 698960 Band 2 : 17102200 Band 1 : 698960 Band 2 : 24902700 Band 1 : 698960 Band 2 : 24902700 Band 1 : 17102200 Band 2 : 24902700 Band 1 : 17102200 Band 2 : 24902700 Band 1 : 790960 Band 2 : 17101880 Band 3 : 19202200 Band 1 : 790960 Band 2 : 17101880 Band 3 : 19202200 Band 1 : 790960 Band 2 : 17101880 Band 3 : 19202200 Band 1 : 790960 Band 2 : 17101880 Band 3 : 19202200 Band 1 : 7901880 Band 2 : 19202200 Band 1 : 24902700 Band 1 : 790960 Band 2 : 17101880 Band 3 : 19202200 Band 4 : 24902700
** Preliminary Issue
Max. Input power (W) 300 300 200 200 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300
DC-Bypass 17101880MHz DC-bypass 19202200MHz DC-bypass 880960MHz DC-bypass 17102200MHz DC-bypass 17102200MHz DC-bypass 24902700MHz DC-bypass 24902700MHz DC-bypass 17102200MHz DC-bypass 17102200MHz DC-bypass 19202200MHz DC-bypass 17101880MHz DC-bypass 19202200MHz DC-bypass 19202200MHz DC-bypass 17101880MHz DC-bypass 19202200MHz DC-bypass 19202200MHz DC-bypass
Intermodulation (dBm)
Dimension (mm)
Model
Page
< -110
ACOMD2H08
168
< -110 < -117 < -110 < -117 < -110 < -117 < -110
Double Unit: 180 x 210 x 107 Double Unit: 130 x 190 x 105 Double Unit: 130 x 190 x 105 Double Unit: 130 x 190 x 105 Double Unit: 130 x 190 x 105 Double Unit: 126 x 102 x 103 Double Unit: 126 x 102 x 103
< -117
ACOMT2H00
< -117
ACOMT2H02
192
< -110
ACOMT2H01
195
< -110
ACOMT2H03
195
< -110
**ACOMT2M00
198
19202200MHz DC-bypass
< -110
**ACOMQ2M00
201
In de x
205
Adjustment time (full range) (min) Calibration time (min) Dimension (mm) Model ARCU01100(AISG 1.1) ARCU01101(AISG 1.1) ARCU01102(AISG 1.1) ARCU01103(AISG 1.1) ARCU02000(AISG 2.0) <2 < 1.5 (typically, depending on antenna type) <4 < 3 (typically, depending on antenna type) 200 x 56 x 47 ARCU01104(AISG 1.1) ARCU02001(AISG 2.0) ARCU01109 (AISG 1.1) 180 x 65 x 54 ARCU02004 (AISG 2.0) Page
AISG type
DC 1030
AISG v1.1
<2
<4
205 x 65.5 x 56
206
AISG v2.0 DC 1030 AISG v1.1 AISG v2.0 AISG v1.1 DC 1030 AISG v2.0
207
208
209
212
215 216
In
de
D. Mounting Instructions
D1. Antenna Installation Guide
Antenna (C1) Installation Guide Antenna (D1) Installation Guide
218 220
222
224
237
239 241
In de x
A B C D
Mounting Instructions
OV-450-470-360-9i-0F
Model: A45VP0900
Electrical Properties Frequency range (MHz) Polarization VSWR Gain (dBi) Horizontal 3dB beam width () Vertical 3dB beam width () Antenna pattern roundness (dB) Electrical downtilt() Intermodulation IM3 (dBc) Max. CW input power (W) Impedance () Grounding Mechanical Properties Dimensions (mm) Packing dimensions (mm) Net weight (kg) Bracket weight (kg) Packing weight (kg) Mast diameter (mm) Radome material Operating temperature () Max. wind velocity (km/h) Connector 52 x 3316 164 x 3470 5.0 2.0 13.5 5085 Fiberglass -55+65 200 1 x 7/16 DIN Female 450470 Vertical 1.4 9.0 360 11 1 0 -150 150 50 DC Ground
450460 MHz
455465 MHz
460470 MHz
HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com
45
0 4 DX 70M
Hz
www.huawei.com
DX-450-470-65-15i-0F
Model: A45451500
Electrical Properties Frequency range (MHz) Polarization VSWR Gain (dBi) Horizontal 3dB beam width () Vertical 3dB beam width () Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) Electrical downtilt () Intermodulation IM5 (dBc) Max. CW input power (W) Impedance () Grounding Mechanical Properties Dimensions (H x W x D) (mm) Packing dimensions (H x W x D) (mm) Net weight (kg) Bracket weight (kg) Packing weight (kg) Mechanical downtilt () Mast diameter (mm) Radome material Operating temperature () Wind load (N) Max. wind velocity (km/h) Connector 2042 x 486 x 98 2267 x 598 x 269 28.3 6.5 41.6 016 50115 Fiberglass -55+65 Frontal: 740 (v=150 km/h) Lateral: 220 (v=150 km/h) Rear side: 1100 (v=150 km/h) 200 2 x 7/16 DIN Female 450470 X +45 -45 450470 +45, -45 1.5 15 65 16 30 25 15 0 -160 (2 x 43 dBm carrier) 500 50 DC Ground
7/16 (F)
7/16 (F)
450460 MHz
455465 MHz
460470 MHz
HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com
45
0M 47 X 0 D Hz
DX-790-960-65-15i-M
Model: A79451500v01
Preliminary Issue
Electrical Properties Frequency range (MHz) Polarization Electrical downtilt () Gain (dBi) Side lobe suppression for rst side lobe above horizon (Typ.) (dB) Horizontal 3dB beam width () Vertical 3dB beam width () VSWR Isolation between ports (dB) Front to back ratio, copolar (dB) 0 Cross polar ratio (dB) 60 Max. power per input (W) Intermodulation IM3 (dBc) Squint () Tracking (dB) Impedance () Grounding 0 14.6 0 18 7 14.5 7 17 67 15.2 790862 790960 824894 +45 , -45 014 , continuously adjustable 14 0 7 14 0 14.2 14.9 14.8 14.6 15.1 14 0 7 14 0 16 18 17 16 18 65 14.5 < 1.4 30 Typ. 28 Typ. 25 10 500 (at 50 ambient temperature) -153 (2 x 43 dBm carrier) 3 Avg. 1 (within 10dB HBW) 50 DC Ground 880960
7 14.8 7 17 63 13.6
14 14.7 14 16
Mechanical Properties Antenna dimensions (H x W x D) (mm) Packing dimensions (H x W x D) (mm) Antenna net weight (kg) Bracket weight (kg) Packing weight (kg) Mechanical downtilt () Mast diameter (mm) Radome material Radome colour Operational temperature () Wind load (N) Max. operational wind speed (km/h) Survival wind speed (km/h) Connector Connector position 1356 x 259 x 135 1784 x 392 x 230 11.2 4.6 20 016 50115 Fiberglass Light grey -55 .. +65 Frontal: 440 (at 150 km/h) Lateral: 230 (at 150 km/h) Rear side: 585 (at 150 km/h) 150 200 2 x 7/16 DIN Female Bottom
HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com
79
9 DX 60M
Hz
www.huawei.com
DX-790-960-65-16.5i-M
Model: A79451600v01
Electrical Properties Frequency range (MHz) Polarization Electrical downtilt () Gain (dBi) Side lobe suppression for rst side lobe above horizon (Typ.) (dB) Horizontal 3dB beam width () Vertical 3dB beam width () VSWR Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) Max. power per input (W) Intermodulation IM3 (dBc) Squint () Tracking (dB) Impedance () Grounding Mechanical Properties Antenna dimensions (H x W x D) (mm) Packing dimensions (H x W x D) (mm) Antenna net weight (kg) Bracket weight (kg) Packing weight (kg) Mechanical downtilt () Mast diameter (mm) Radome material Radome colour Operational temperature () Wind load (N) Max. operational wind speed (km/h) Survival wind speed (km/h) Connector Connector position 1936 x 259 x 135 2357 x 392 x 230 14.2 4.6 25 012 50115 Fiberglass Light grey -55 .. +65 Frontal: 665 (at 150 km/h) Lateral: 345 (at 150 km/h) Rear side: 880 (at 150 km/h) 150 200 2 x 7/16 DIN Female Bottom 0 60 0 16.2 0 20 6 16.3 6 20 67 10.5 12 16.0 12 16 0 16.3 0 20 790960 790862 824894 +45 , -45 012 , continuously adjustable 6 16.5 6 18 65 10.1 < 1.5 30 Typ. 28 Typ. 25 10 500 (at 50 ambient temperature) -153 (2 x 43 dBm carrier) Avg. 1.5 Avg. 1 (within 10dB HBW) 50 DC Ground 12 16.3 12 16 0 16.6 0 20 6 16.8 6 17 63 9.5 12 16.4 12 16 880960
79 0M 96 X 0 D Hz
DX-790-960-65-16.5i-M
Model: A79451600v01
56
70
Unit: mm
7/16 (F)
7/16 (F)
790960 MHz HINT Extraordinary operating conditions, such as heavy icing or storm wind, may result in the breakage of an antenna. These facts must be considered during the site planning process. The installation team must be properly qualied and also be familiar with the relevant national safety regulations.
HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com
79
9 DX 60M
Hz
www.huawei.com
DX-790-960-65-17i-0F
Model: A90451702v01
Electrical Properties Frequency range (MHz) Polarization Electrical downtilt () Gain (dBi) Side lobe suppression for rst side lobe above horizon (Typ.) (dB) Horizontal 3dB beam width () Vertical 3dB beam width () VSWR Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) Max. power per input (W) Intermodulation IM3 (dBc) Squint () Tracking (dB) Impedance () Grounding Mechanical Properties Antenna dimensions (H x W x D) (mm) Packing dimensions (H x W x D) (mm) Antenna net weight (kg) Bracket weight (kg) Packing weight (kg) Mechanical downtilt () Mast diameter (mm) Radome material Radome colour Operational temperature () Wind load (N) Max. operational wind speed (km/h) Survival wind speed (km/h) Connector Connector position 1936 x 260 x 135 2357 x 392 x 230 12.9 4.6 22.3 012 50115 Fiberglass Light grey -55 .. +65 Frontal: 665 (at 150 km/h) Lateral: 345 (at 150 km/h) Rear side: 880 (at 150 km/h) 150 200 2 x 7/16 DIN Female Bottom 0 60 16.5 20 67 9.8 790960 790862 824894 +45, -45 0, Fixed 16.7 20 65 9.4 < 1.4 30 Typ. 32 Typ. 25 10 500 -153 (2 x 43 dBm carrier) Avg. 0.6 Avg. 0.6 (within 10dB HBW) 50 DC Ground 17.1 20 63 8.9 880960
79 0M 96 X 0 D Hz
DX-790-960-65-17i-0F
Model: A90451702v01
70
Unit: mm
7/16 (F)
7/16 (F)
790960 MHz HINT Extraordinary operating conditions, such as heavy icing or storm wind, may result in the breakage of an antenna. These facts must be considered during the site planning process. The installation team must be properly qualied and also be familiar with the relevant national safety regulations.
HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com
79
9 DX 60M
Hz
www.huawei.com
DX-790-960-65-17i-3F
Model: A90451705v01
Electrical Properties Frequency range (MHz) Polarization Electrical downtilt () Gain (dBi) Side lobe suppression for rst side lobe above horizon (Typ.) (dB) Horizontal 3dB beam width () Vertical 3dB beam width () VSWR Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) Max. power per input (W) Intermodulation IM3 (dBc) Squint () Tracking (dB) Impedance () Grounding Mechanical Properties Antenna dimensions (H x W x D) (mm) Packing dimensions (H x W x D) (mm) Antenna net weight (kg) Bracket weight (kg) Packing weight (kg) Mechanical downtilt () Mast diameter (mm) Radome material Radome colour Operational temperature () Wind load (N) Max. operational wind speed (km/h) Survival wind speed (km/h) Connector Connector position 1936 x 260 x 135 2357 x 392 x 230 12.9 4.6 22.3 012 50115 Fiberglass Light grey -55 .. +65 Frontal: 665 (at 150 km/h) Lateral: 345 (at 150 km/h) Rear side: 880 (at 150 km/h) 150 200 2 x 7/16 DIN Female Bottom 0 60 16.5 19 67 9.8 790960 790862 824894 +45 , -45 3, Fixed 16.7 19 65 9.4 < 1.4 30 Typ. 32 Typ. 25 10 500 -153 (2 x 43 dBm carrier) Avg. 0.6 Avg. 0.6 (within 10dB HBW) 50 DC Ground 17.1 19 63 8.9 880960
79 0M 96 X 0 D Hz
DX-790-960-65-17i-3F
Model: A90451705v01
70
Unit: mm
7/16 (F)
7/16 (F)
790960 MHz HINT Extraordinary operating conditions, such as heavy icing or storm wind, may result in the breakage of an antenna. These facts must be considered during the site planning process. The installation team must be properly qualied and also be familiar with the relevant national safety regulations.
HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com
79
10
9 DX 60M
Hz
www.huawei.com
DX-790-960-65-17i-6F
Model: A90451709
Electrical Properties Frequency range (MHz) Polarization Electrical downtilt () Gain (dBi) Side lobe suppression for rst side lobe above horizon (Typ.) (dB) Horizontal 3dB beam width () Vertical 3dB beam width () VSWR Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) Max. power per input (W) Intermodulation IM3 (dBc) Max. power per input (W) Intermodulation IM3 (dBc) Impedance () Grounding Mechanical Properties Antenna dimensions (H x W x D) (mm) Packing dimensions (H x W x D) (mm) Antenna net weight (kg) Bracket weight (kg) Packing weight (kg) Mechanical downtilt () Mast diameter (mm) Radome material Radome colour Operational temperature () Wind load (N) Max. operational wind speed (km/h) Survival wind speed (km/h) Connector Connector position 1936 x 260 x 135 2357 x 392 x 230 12.9 4.6 22.3 012 50115 Fiberglass Light grey -55 .. +65 Frontal: 665 (at 150 km/h) Lateral: 345 (at 150 km/h) Rear side: 880 (at 150 km/h) 150 200 2 x 7/16 DIN Female Bottom 0 60 16.5 19 67 9.8 790960 790862 824894 +45 , -45 6, Fixed 16.7 19 65 9.4 < 1.4 30 Typ. 30 Typ. 25 10 500 -153 (2 x 43 dBm carrier) Avg. 0.6 Avg. 0.8 (within 10dB HBW) 50 DC Ground 17.1 18 63 8.9 880960
79 0M 96 X 0 D Hz
11
DX-790-960-65-17i-6F
Model: A90451709
70
Unit: mm
7/16 (F)
7/16 (F)
790960 MHz HINT Extraordinary operating conditions, such as heavy icing or storm wind, may result in the breakage of an antenna. These facts must be considered during the site planning process. The installation team must be properly qualied and also be familiar with the relevant national safety regulations.
HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com
79
12
9 DX 60M
Hz
www.huawei.com
DX-790-960-65-17.5i-M
Model: A79451700v01
Electrical Properties Frequency range (MHz) Polarization Electrical downtilt () Gain (dBi) Side lobe suppression for rst side lobe above horizon (Typ.) (dB) Horizontal 3dB beam width () Vertical 3dB beam width () VSWR Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) Max. power per input (W) Intermodulation IM3 (dBc) Squint () Tracking (dB) Impedance () Grounding Mechanical Properties Antenna dimensions (H x W x D) (mm) Packing dimensions (H x W x D) (mm) Antenna net weight (kg) Bracket weight (kg) Packing weight (kg) Mechanical downtilt () Mast diameter (mm) Radome material Radome colour Operational temperature () Wind load (N) Max. operational wind speed (km/h) Survival wind speed (km/h) Connector Connector position 2535 x 259 x 135 2952 x 392 x 230 17.5 5.6 29 08 50115 Fiberglass Light grey -55 .. +65 Frontal: 910 (at 150 km/h) Lateral: 470 (at 150 km/h) Rear side: 1200 (at 150 km/h) 150 200 2 x 7/16 DIN Female Bottom 0 60 0 17.0 0 20 5 17.1 5 18 66 8.3 10 16.7 10 18 0 17.1 0 20 790960 790862 824894 +45, -45 010, continuously adjustable 5 17.3 5 20 66 7.9 < 1.5 30 Typ. 30 Typ. 25 10 500 (at 50 ambient temperature) -153 (2 x 43 dBm carrier) Avg. 1 Avg. 1 (within 10dB HBW) 50 DC Ground 10 17.0 10 18 0 17.3 0 20 5 17.6 5 18 64 7.3 10 17.1 10 18 880960
79 0M 96 X 0 D Hz
13
DX-790-960-65-17.5i-M
Model: A79451700v01
56
70
Unit: mm
7/16 (F)
7/16 (F)
790960 MHz HINT Extraordinary operating conditions, such as heavy icing or storm wind, may result in the breakage of an antenna. These facts must be considered during the site planning process. The installation team must be properly qualied and also be familiar with the relevant national safety regulations.
HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com
79
14
9 DX 60M
Hz
www.huawei.com
DX-790-960-65-18i-0F
Model: A90451802v01
Electrical Properties Frequency range (MHz) Polarization Electrical downtilt () Gain (dBi) Side lobe suppression for rst side lobe above horizon (Typ.) (dB) Horizontal 3dB beam width () Vertical 3dB beam width () VSWR Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) Max. power per input (W) Intermodulation IM3 (dBc) Squint () Tracking (dB) Impedance () Grounding Mechanical Properties Antenna dimensions (H x W x D) (mm) Packing dimensions (H x W x D) (mm) Antenna net weight (kg) Bracket weight (kg) Packing weight (kg) Mechanical downtilt () Mast diameter (mm) Radome material Radome colour Operational temperature () Wind load (N) Max. operational wind speed (km/h) Survival wind speed (km/h) Connector Connector position 2535 x 259 x 135 2952 x 392 x 230 16.3 5.6 27.5 08 50115 Fiberglass Light grey -55 .. +65 Frontal: 910 (at 150 km/h) Lateral: 470 (at 150 km/h) Rear side: 1200 (at 150 km/h) 150 200 2 x 7/16 DIN Female Bottom 0 60 17.5 21 67 7.8 790960 790862 824894 +45 , -45 0, Fixed 17.7 21 65 7.5 < 1.4 30 Typ. 32 Typ. 25 10 500 -153 (2 x 43 dBm carrier) Avg. 0.5 Avg. 0.5 (within 10dB HBW) 50 DC Ground 18.0 21 63 7.1 880960
79 0M 96 X 0 D Hz
15
DX-790-960-65-18i-0F
Model: A90451802v01
70
Unit: mm
7/16 (F)
7/16 (F)
790960 MHz HINT Extraordinary operating conditions, such as heavy icing or storm wind, may result in the breakage of an antenna. These facts must be considered during the site planning process. The installation team must be properly qualied and also be familiar with the relevant national safety regulations.
HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com
79
16
9 DX 60M
Hz
www.huawei.com
DX-790-960-65-18i-3F
Model: A90451805v01
Electrical Properties Frequency range (MHz) Polarization Electrical downtilt () Gain (dBi) Side lobe suppression for rst side lobe above horizon (Typ.) (dB) Horizontal 3dB beam width () Vertical 3dB beam width () VSWR Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) Max. power per input (W) Intermodulation IM3 (dBc) Squint () Tracking (dB) Impedance () Grounding Mechanical Properties Antenna dimensions (H x W x D) (mm) Packing dimensions (H x W x D) (mm) Antenna net weight (kg) Bracket weight (kg) Packing weight (kg) Mechanical downtilt () Mast diameter (mm) Radome material Radome colour Operational temperature () Wind load (N) Max. operational wind speed (km/h) Survival wind speed (km/h) Connector Connector position 2535 x 259 x 135 2952 x 392 x 230 16.3 5.6 27.5 08 50115 Fiberglass Light grey -55 .. +65 Frontal: 910 (at 150 km/h) Lateral: 470 (at 150 km/h) Rear side: 1200 (at 150 km/h) 150 200 2 x 7/16 DIN Female Bottom 0 60 17.5 20 67 7.8 790960 790862 824894 +45 , -45 3, Fixed 17.7 20 65 7.5 < 1.4 30 Typ. 32 Typ. 25 10 500 -153 (2 x 43 dBm carrier) Avg. 0.5 Avg. 0.5 (within 10dB HBW) 50 DC Ground 18.0 20 63 7.1 880960
79 0M 96 X 0 D Hz
17
DX-790-960-65-18i-3F
Model: A90451805v01
70
Unit: mm
7/16 (F)
7/16 (F)
790960 MHz HINT Extraordinary operating conditions, such as heavy icing or storm wind, may result in the breakage of an antenna. These facts must be considered during the site planning process. The installation team must be properly qualied and also be familiar with the relevant national safety regulations.
HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com
79
18
9 DX 60M
Hz
www.huawei.com
DX-806-960-65-15i-0F
Model: A90451500
Electrical Properties Frequency range (MHz) Polarization VSWR Gain (dBi) Side lobe suppression for rst side lobe above horizon (dB) Horizontal 3dB beam width () Vertical 3dB beam width () Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) Electrical downtilt () Intermodulation IM3 (dBc) Max. CW input power (W) Impedance () Grounding Dimensions (H x W x D) (mm) Packing dimensions (H x W x D) (mm) Net weight (kg) Bracket weight (kg) Packing weight (kg) Mechanical downtilt () Mast diameter (mm) Radomematerial Operating temperature () Wind load (N) Max. wind velocity (km/h) Connector 14.6 Typ. 17 67 15.5 806866 824894 +45 , -45 1.4 14.8 Typ. 17 65 15.0 Typ. 17 62 880960
14.6 14.0 30 25 15 0 -150 (2 x 43 dBm carrier) 500 50 DC Ground 1322 x 289 x 85 1662 x 405 x 175 9.5 4.6 18 016
Mechanical Properties
50115 Fiberglass -55 .. +65 Frontal: 290 (v=150 km/h) Lateral: 120 (v=150 km/h) Rear side: 425 (v=150 km/h) 200 2 x 7/16 DIN Female
7/16 (F)
7/16 (F)
806866 MHz
824894 MHz
880960 MHz
HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com
80
0M 96 X 6 D Hz
19
DX-806-960-65-15i-6F
Model: A90451501
Electrical Properties Frequency range (MHz) Polarization VSWR Gain (dBi) Side lobe suppression for rst side lobe above horizon (dB) Horizontal 3dB beam width () Vertical 3dB beam width () Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) Electrical downtilt () Intermodulation IM3 (dBc) Max. CW input power (W) Impedance () Grounding Dimensions (H x W x D) (mm) Packing dimensions (H x W x D) (mm) Net weight (kg) Bracket weight (kg) Packing weight (kg) Mechanical downtilt () Mast diameter (mm) Radomematerial Operating temperature () Wind load (N) Max. wind velocity (km/h) Connector 14.5 Typ. 17 67 15.5 806866 824894 +45 , -45 1.4 14.7 Typ. 17 65 14.9 Typ. 17 62 880960
14.9 14.0 30 25 15 6 -150 (2 x 43 dBm carrier) 500 50 DC Ground 1322 x 289 x 85 1662 x 405 x 175 9.5 4.6 18 016
Mechanical Properties
50115 Fiberglass -55 .. +65 Frontal: 290 (v=150 km/h) Lateral: 120 (v=150 km/h) Rear side: 425 (v=150 km/h) 200 2 x 7/16 DIN Female
7/16 (F)
7/16 (F)
806866 MHz
824894 MHz
880960 MHz
HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com
80
20
9 DX 60M
Hz
www.huawei.com
DX-806-960-65-15i-3F
Model: A90451505
Electrical Properties Frequency range (MHz) Polarization VSWR Gain (dBi) Side lobe suppression for rst side lobe above horizon (dB) Horizontal 3dB beam width () Vertical 3dB beam width () Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) Electrical downtilt () Intermodulation IM3 (dBc) Max. CW input power (W) Impedance () Grounding Dimensions (H x W x D) (mm) Packing dimensions (H x W x D) (mm) Net weight (kg) Bracket weight (kg) Packing weight (kg) Mechanical downtilt () Mast diameter (mm) Radomematerial Operating temperature () Wind load (N) Max. wind velocity (km/h) Connector 14.7 Typ. 17 67 15.5 806866 824894 +45 , -45 1.5 15.0 Typ. 17 65 15.3 Typ. 17 62 880960
14.6 14.0 28 25 15 3 -150 (2 x 43 dBm carrier) 500 50 DC Ground 1322 x 289 x 85 1662 x 405 x 175 9.5 4.6 18 016
Mechanical Properties
50115 Fiberglass -55 .. +65 Frontal: 290 (v=150 km/h) Lateral: 120 (v=150 km/h) Rear side: 425 (v=150 km/h) 200 2 x 7/16 DIN Female
7/16 (F)
7/16 (F)
806866 MHz
824894 MHz
880960 MHz
HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com
80
0M 96 X 6 D Hz
21
DX-806-960-65-15.3i-0F
Model: A90451502
Electrical Properties Frequency range (MHz) Polarization VSWR Gain (dBi) Side lobe suppression for rst side lobe above horizon (dB) Horizontal 3dB beam width () Vertical 3dB beam width () Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) Electrical downtilt () Intermodulation IM3 (dBc) Max. CW input power (W) Impedance () Grounding Dimensions (H x W x D) (mm) Packing dimensions (H x W x D) (mm) Net weight (kg) Bracket weight (kg) Packing weight (kg) Mechanical downtilt () Mast diameter (mm) Radomematerial Operating temperature () Wind load (N) Max. wind velocity (km/h) Connector 0 60 806866 1.4 14.8 19 68 15.9 824894 +45 , -45 1.4 15.0 19 66 880960 1.3 15.3 19 64
15.4 14.3 30 30 20 10 0 -150 (2 x 43 dBm carrier) 500 50 DC Ground 1312 x 295 x 126 1622 x 405 x 205 10.5 4.6 18 016
Mechanical Properties
50115 Fiberglass -55 .. +65 Frontal: 290 (v=150 km/h) Lateral: 180 (v=150 km/h) Rear side: 430 (v=150 km/h) 200 2 x 7/16 DIN Female
7/16 (F)
7/16 (F)
806866 MHz
824894 MHz
880960 MHz
HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com
80
22
9 DX 60M
Hz
www.huawei.com
DX-806-960-65-15.3i-6F
Model: A90451503
Electrical Properties Frequency range (MHz) Polarization VSWR Gain (dBi) Side lobe suppression for rst side lobe above horizon (dB) Horizontal 3dB beam width () Vertical 3dB beam width () Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) Electrical downtilt () Intermodulation IM3 (dBc) Max. CW input power (W) Impedance () Grounding Dimensions (H x W x D) (mm) Packing dimensions (H x W x D) (mm) Net weight (kg) Bracket weight (kg) Packing weight (kg) Mechanical downtilt () Mast diameter (mm) Radomematerial Operating temperature () Wind load (N) Max. wind velocity (km/h) Connector 0 60 806866 1.35 14.7 19 68 15.9 824894 +45 , -45 1.35 14.9 19 66 880960 1.3 15.2 19 64
15.4 14.3 30 30 20 10 6 -150 (2 x 43 dBm carrier) 500 50 DC Ground 1312 x 295 x 126 1622 x 405 x 205 10.5 4.6 18 016
Mechanical Properties
50115 Fiberglass -55 .. +65 Frontal: 290 (v=150 km/h) Lateral: 180 (v=150 km/h) Rear side: 430 (v=150 km/h) 200 2 x 7/16 DIN Female
7/16 (F)
7/16 (F)
806866 MHz
824894 MHz
880960 MHz
HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com
80
0M 96 X 6 D Hz
23
DX-806-960-65-17i-0F
Model: A90451700
Electrical Properties Frequency range (MHz) Polarization VSWR Gain (dBi) Side lobe suppression for rst side lobe above horizon (dB) Horizontal 3dB beam width () Vertical 3dB beam width () Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) Electrical downtilt () Intermodulation IM3 (dBc) Max. CW input power (W) Impedance () Grounding Dimensions (H x W x D) (mm) Packing dimensions (H x W x D) (mm) Net weight (kg) Bracket weight (kg) Packing weight (kg) Mechanical downtilt () Mast diameter (mm) Radomematerial Operating temperature () Wind load (N) Max. wind velocity (km/h) Connector 16.6 Typ. 17 67 11.0 806866 824894 +45 , -45 1.37 16.8 Typ. 17 64 17.0 Typ. 17 63 880960
10.5 10.0 28 25 15 0 -150 (2 x 43 dBm carrier) 500 50 DC Ground 1932 x 289 x 85 2272 x 405 x 175 13.5 4.6 20.8 012
Mechanical Properties
50115 Fiberglass -55 .. +65 Frontal: 420 (v=150 km/h) Lateral: 175 (v=150 km/h) Rear side: 620 (v=150 km/h) 200 2 x 7/16 DIN Female
7/16 (F)
7/16 (F)
806866 MHz
824894 MHz
880960 MHz
HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com
80
24
9 DX 60M
Hz
www.huawei.com
DX-806-960-65-17i-3F
Model: A90451705
Electrical Properties Frequency range (MHz) Polarization VSWR Gain (dBi) Side lobe suppression for rst side lobe above horizon (dB) Horizontal 3dB beam width () Vertical 3dB beam width () Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) Electrical downtilt () Intermodulation IM3 (dBc) Max. CW input power (W) Impedance () Grounding Dimensions (H x W x D) (mm) Packing dimensions (H x W x D) (mm) Net weight (kg) Bracket weight (kg) Packing weight (kg) Mechanical downtilt () Mast diameter (mm) Radomematerial Operating temperature () Wind load (N) Max. wind velocity (km/h) Connector 16.7 Typ. 17 67 11.0 806866 824894 +45 , -45 1.5 17.0 Typ. 17 64 17.2 Typ. 17 63 880960
10.5 10.0 28 25 15 3 -150 (2 x 43 dBm carrier) 500 50 DC Ground 1932 x 289 x 85 2272 x 405 x 175 13.5 4.6 21.6 012
Mechanical Properties
50115 Fiberglass -55 .. +65 Frontal: 420 (v=150 km/h) Lateral: 175 (v=150 km/h) Rear side: 620 (v=150 km/h) 200 2 x 7/16 DIN Female
7/16 (F)
7/16 (F)
806866 MHz
824894 MHz
880960 MHz
HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com
80
0M 96 X 6 D Hz
25
DX-806-960-90-17i-3F
Model: A90451706
Electrical Properties Frequency range (MHz) Polarization Electrical downtilt () Gain (dBi) Side lobe suppression for rst side lobe above horizon (Typ.) (dB) Horizontal 3dB beam width () Vertical 3dB beam width () VSWR Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) Max. power per input (W) Intermodulation IM3 (dBc) Squint () Tracking (dB) Impedance () Grounding Mechanical Properties Antenna dimensions (H x W x D) (mm) Packing dimensions (H x W x D) (mm) Antenna net weight (kg) Bracket weight (kg) Packing weight (kg) Mechanical downtilt () Mast diameter (mm) Radome material Radome colour Operational temperature () Wind load (N) Max. operational wind speed (km/h) Survival wind speed (km/h) Connector Connector position 2526 x 268 x 125 2842 x 405 x 205 17.4 4.6 28.8 08 50115 Fiberglass Light grey -55 .. +65 Frontal: 510 (at 150 km/h) Lateral: 340 (at 150 km/h) Rear side: 750 (at 150 km/h) 150 200 2 x 7/16 DIN Female 0 60 16.4 19 88 7.9 806960 806866 824894 +45 , -45 3, Fixed 16.7 19 86 7.6 < 1.4 30 25 Typ. 20 10 500 -153 (2 x 43 dBm carrier) Avg. 1.0 Avg. 0.6 (within 10dB HBW) 50 DC Ground 16.9 19 84 7.1 880960
80
26
9 DX 60M
Hz
Bottom
DX-806-960-90-17i-3F
Model: A90451706
120
Unit: mm
7/16 (F)
7/16 (F)
806960 MHz HINT Extraordinary operating conditions, such as heavy icing or storm wind, may result in the breakage of an antenna. These facts must be considered during the site planning process. The installation team must be properly qualied and also be familiar with the relevant national safety regulations.
HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com
80
0M 96 X 6 D Hz
27
DX-806-960-90-17i-0F
Model: A90451600
Electrical Properties Frequency range (MHz) Polarization VSWR Gain (dBi) Side lobe suppression for rst side lobe above horizon (dB) Horizontal 3dB beam width () Vertical 3dB beam width () Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) Electrical downtilt () Intermodulation IM3 (dBc) Max. CW input power (W) Impedance () Grounding Dimensions (H x W x D) (mm) Packing dimensions (H x W x D) (mm) Net weight (kg) Bracket weight (kg) Packing weight (kg) Mechanical downtilt () Mast diameter (mm) Radomematerial Operating temperature () Wind load (N) Max. wind velocity (km/h) Connector 0 60 16.5 18 88 8.1 806866 824894 +45 , -45 1.4 16.8 18 86 17.0 18 84 880960
7.9 7.2 30 25 15 10 0 -150 (2 x 43 dBm carrier) 500 50 DC Ground 2526 x 268 x 125 2842 x 405 x 205 16.1 4.6 27.3 08
Mechanical Properties
50115 Fiberglass -55 .. +65 Frontal: 510 (v=150 km/h) Lateral: 340 (v=150 km/h) Rear side: 750 (v=150 km/h) 200 2 x 7/16 DIN Female
7/16 (F)
7/16 (F)
806866 MHz
824894 MHz
880960 MHz
HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com
80
28
9 DX 60M
Hz
www.huawei.com
DX-806-960-90-17i-M
Model: A90451704
Frequency range (MHz) Polarization VSWR Gain Side lobe suppression for rst side lobe above horizon Horizontal 3dB beam width ()
Electrical Properties 806866 1.45 () (dBi) () (dBi) 2 16.1 2 18 6 16.2 6 18 88 8.2 9.5 16.0 9.5 18
Vertical 3dB beam width () Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) Electrical downtilt () Intermodulation IM3 (dBc) Max. CW input power (W) Impedance () Grounding 0 60
Mechanical Properties Dimensions (H x W x D) (mm) 2526 x 268 x 125 Packing dimensions (H x W x D) (mm) 2842 x 399 x 215 Net weight (kg) 18.6 Bracket weight (kg) 4.6 Packing weight (kg) 27 Mechanical downtilt () Mast diameter (mm) Radomematerial Operating temperature () Wind load (N) Max. wind velocity (km/h) Connector 08 50115 Fiberglass -55 .. +65 Frontal: 510 (v=150 km/h) Lateral: 340 (v=150 km/h) Rear side: 750 (v=150 km/h) 200 2 x 7/16 DIN Female
806960 X +45 -45
7/16 (F)
7/16 (F)
806866 MHz
824894 MHz
880960 MHz
HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com
80
0M 96 X 6 D Hz
29
DX-806-960-65-17.5i-M
Model: A90451701
Frequency range (MHz) Polarization VSWR Gain Side lobe suppression for rst side lobe above horizon Horizontal 3dB beam width ()
Electrical Properties 806866 1.47 () (dBi) () (dBi) 2 17.1 2 18 6 17.2 6 17 68 8.8 9.5 16.9 9.5 16
Vertical 3dB beam width () Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) Electrical downtilt () Intermodulation IM3 (dBc) Max. CW input power (W) Impedance () Grounding 0 60
Mechanical Properties Dimensions (H x W x D) (mm) 2515 x 289 x 85 Packing dimensions (H x W x D) (mm) 2855 x 405 x 175 Net weight (kg) 15.5 Bracket weight (kg) 4.6 Packing weight (kg) 25.3 Mechanical downtilt () Mast diameter (mm) Radomematerial Operating temperature () Wind load (N) Max. wind velocity (km/h) Connector 08 50115 Fiberglass -55 .. +65 Frontal: 540 (v=150 km/h) Lateral: 230 (v=150 km/h) Rear side: 810 (v=150 km/h) 200 2 x 7/16 DIN Female
806960 X +45 -45
7/16 (F)
7/16 (F)
806866 MHz
824894 MHz
880960 MHz
HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com
80
30
9 DX 60M
Hz
www.huawei.com
DX-806-960-65-18i-0F
Model: A90451800
Electrical Properties Frequency range (MHz) Polarization VSWR Gain (dBi) Side lobe suppression for rst side lobe above horizon (dB) Horizontal 3dB beam width () Vertical 3dB beam width () Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) Electrical downtilt () Intermodulation IM3 (dBc) Max. CW input power (W) Impedance () Grounding Dimensions (H x W x D) (mm) Packing dimensions (H x W x D) (mm) Net weight (kg) Bracket weight (kg) Packing weight (kg) Mechanical downtilt () Mast diameter (mm) Radomematerial Operating temperature () Wind load (N) Max. wind velocity (km/h) Connector 17.4 Typ. 17 67 8.2 806866 824894 +45 , -45 1.45 17.6 Typ. 17 64 17.8 Typ. 17 63 880960
7.5 7.0 28 25 15 0 -150 (2 x 43 dBm carrier) 500 50 DC Ground 2572 x 289 x 85 2912 x 405 x 175 16.5 4.6 25.3 08
Mechanical Properties
50115 Fiberglass -55 .. +65 Frontal: 560 (v=150 km/h) Lateral: 235 (v=150 km/h) Rear side: 830 (v=150 km/h) 200 2 x 7/16 DIN Female
7/16 (F)
7/16 (F)
806866 MHz
824894 MHz
880960 MHz
HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com
80
0M 96 X 6 D Hz
31
DX-806-960-65-18i-3F
Model: A90451805
Electrical Properties Frequency range (MHz) Polarization VSWR Gain (dBi) Side lobe suppression for rst side lobe above horizon (dB) Horizontal 3dB beam width () Vertical 3dB beam width () Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) Electrical downtilt () Intermodulation IM3 (dBc) Max. CW input power (W) Impedance () Grounding Dimensions (H x W x D) (mm) Packing dimensions (H x W x D) (mm) Net weight (kg) Bracket weight (kg) Packing weight (kg) Mechanical downtilt () Mast diameter (mm) Radomematerial Operating temperature () Wind load (N) Max. wind velocity (km/h) Connector 17.8 Typ. 17 67 8.2 806866 824894 +45 , -45 1.45 18.0 Typ. 17 64 18.2 Typ. 17 63 880960
7.5 7.0 28 25 15 3 -150 (2 x 43 dBm carrier) 500 50 DC Ground 2572 x 289 x 85 2912 x 405 x 175 16.5 4.6 26 08
Mechanical Properties
50115 Fiberglass -55 .. +65 Frontal: 560 (v=150 km/h) Lateral: 235 (v=150 km/h) Rear side: 830 (v=150 km/h) 200 2 x 7/16 DIN Female
7/16 (F)
7/16 (F)
806866 MHz
824894 MHz
880960 MHz
HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com
80
32
9 DX 60M
Hz
www.huawei.com
DX-806-960-65-18i-6F
Model: A90451801
Electrical Properties Frequency range (MHz) Polarization VSWR Gain (dBi) Side lobe suppression for rst side lobe above horizon (dB) Horizontal 3dB beam width () Vertical 3dB beam width () Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) Electrical downtilt () Intermodulation IM3 (dBc) Max. CW input power (W) Impedance () Grounding Dimensions (H x W x D) (mm) Packing dimensions (H x W x D) (mm) Net weight (kg) Bracket weight (kg) Packing weight (kg) Mechanical downtilt () Mast diameter (mm) Radomematerial Operating temperature () Wind load (N) Max. wind velocity (km/h) Connector 17.3 Typ. 17 67 8.0 806866 824894 +45 , -45 1.37 17.6 Typ. 17 64 17.8 Typ. 17 63 880960
7.3 6.8 30 25 15 6 -150 (2 x 43 dBm carrier) 500 50 DC Ground 2572 x 289 x 85 2912 x 405 x 175 16.5 4.6 26 08
Mechanical Properties
50115 Fiberglass -55 .. +65 Frontal: 560 (v=150 km/h) Lateral: 235 (v=150 km/h) Rear side: 830 (v=150 km/h) 200 2 x 7/16 DIN Female
7/16 (F)
7/16 (F)
806866 MHz
824894 MHz
880960 MHz
HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com
80
0M 96 X 6 D Hz
33
DX-806-960-65-18.2i-6F
Model: A90451804
Gain (dBi) Side lobe suppression for rst side lobe above horizon (dB) Horizontal 3dB beam width () Vertical 3dB beam width () Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) Electrical downtilt () Intermodulation IM3 (dBc) Max. CW input power (W) Impedance () Grounding Dimensions (H x W x D) (mm) Packing dimensions (H x W x D) (mm) Net weight (kg) Bracket weight (kg) Packing weight (kg) Mechanical downtilt () Mast diameter (mm) Radomematerial Operating temperature () Wind load (N) Max. wind velocity (km/h) Connector 0 60
7.8 7.3 32 30 20 10 6 -150 (2 x 43 dBm carrier) 500 50 DC Ground 2532 x 295 x 126 2842 x 405 x 205 19 4.6 28 08
Mechanical Properties
50115 Fiberglass -55 .. +65 Frontal: 560 (v=150 km/h) Lateral: 340 (v=150 km/h) Rear side: 830 (v=150 km/h) 200 2 x 7/16 DIN Female
7/16 (F)
7/16 (F)
806866 MHz
824894 MHz
880960 MHz
HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com
80
34
9 DX 60M
Hz
www.huawei.com
DX-1710-2170-90-17i-M
Model: A19451703
Frequency range (MHz) Polarization VSWR Gain Side lobe suppression for rst side lobe above horizon Horizontal 3dB beam width ()
19202170
() (dBi) () (dBi)
2 16.3 2 18
6 16.5 6 17 84 7.5
10 16.2 10 16
2 16.7 2 18
6 17.0 6 17 86
10 16.5 10 16
Vertical 3dB beam width () Isolation between ports (dB) Front to back ratio, copolar (dB) 0 Cross polar ratio (dB) 60 Electrical downtilt () Intermodulation IM3 (dBc) Max. CW input power (W) Impedance () Grounding
Mechanical Properties Dimensions (H x W x D) (mm) 1306 x 155 x 79 Packing dimensions (H x W x D) (mm) 1770 x 260 x 160 Net weight (kg) 6.5 Bracket weight (kg) 3.0 Packing weight (kg) 11.8 Mechanical downtilt () Mast diameter (mm) Radomematerial Operating temperature () Wind load (N) Max. wind velocity (km/h) Connector 016 50115 Fiberglass -55 .. +65 Frontal: 150 (v=150 km/h) Lateral: 110 (v=150 km/h) Rear side: 225 (v=150 km/h) 200 2 x 7/16 DIN Female
17102170 X +45 -45
7/16 (F)
7/16 (F)
17101880 MHz
18501990 MHz
19202170 MHz
HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com
17 10
M 70 21 DX Hz
35
DX-1710-2170-90-17i-0F
Model: A19451704
Electrical Properties Frequency range (MHz) Polarization Electrical downtilt () Gain (dBi) Side lobe suppression for rst side lobe above horizon (dB) Horizontal 3dB beam width () Vertical 3dB beam width () VSWR Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) Max. power per input (W) Intermodulation IM3 (dBc) Squint () Tracking (dB) Impedance () Grounding Mechanical Properties Antenna dimensions (H x W x D) (mm) Packing dimensions (H x W x D) (mm) Antenna net weight (kg) Bracket weight (kg) Packing weight (kg) Mechanical downtilt () Mast diameter (mm) Radome material Radome colour Operational temperature () Wind load (N) Max. operational wind speed (km/h) Survival wind speed (km/h) Connector Connector position 1306 x 155 x 79 1770 x 260 x 160 5.4 3.0 10.5 016 50115 Fiberglass Light grey -55 .. +65 Frontal: 290 (at 150 km/h) Lateral: 115 (at 150 km/h) Rear side: 335 (at 150 km/h) 150 200 2 x 7/16 DIN Female 0 60 16.5 18 86 7.0 1710 - 2170 17101880 18501990 +45, -45 0, Fixed 16.7 20 85 6.7 < 1.4 30 25 Typ. 20 10 300 (at 50 ambient temperature) -153 (2 x 43 dBm carrier) Avg. 2.0 Avg. 0.8 (within 10dB HBW) 50 DC Ground 17.1 20 84 6.4 19202170
17
10
36
2 DX 170 M
Hz
Bottom
DX-1710-2170-90-17i-0F
Model: A19451704
80
Unit: mm
7/16 (F)
7/16 (F)
17102170 MHz
HINT Extraordinary operating conditions, such as heavy icing or storm wind, may result in the breakage of an antenna. These facts must be considered during the site planning process. The installation team must be properly qualied and also be familiar with the relevant national safety regulations.
HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com
17 10
M 70 21 DX Hz
37
DX-1710-2170-90-17i-3F
Model: A19451705
Electrical Properties Frequency range (MHz) Polarization Electrical downtilt () Gain (dBi) Side lobe suppression for rst side lobe above horizon (dB) Horizontal 3dB beam width () Vertical 3dB beam width () VSWR Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) Max. power per input (W) Intermodulation IM3 (dBc) Squint () Tracking (dB) Impedance () Grounding Mechanical Properties Antenna dimensions (H x W x D) (mm) Packing dimensions (H x W x D) (mm) Antenna net weight (kg) Bracket weight (kg) Packing weight (kg) Mechanical downtilt () Mast diameter (mm) Radome material Radome colour Operational temperature () Wind load (N) Max. operational wind speed (km/h) Survival wind speed (km/h) Connector Connector position 1306 x 155 x 79 1770 x 260 x 160 5.4 3.0 10.5 016 50115 Fiberglass Light grey -55 .. +65 Frontal: 290 (at 150 km/h) Lateral: 115 (at 150 km/h) Rear side: 335 (at 150 km/h) 150 200 2 x 7/16 DIN Female 0 60 16.5 18 86 7.0 1710 - 2170 17101880 18501990 +45, -45 3, Fixed 16.7 20 85 6.7 < 1.4 30 25 Typ. 20 10 300 (at 50 ambient temperature) -153 (2 x 43 dBm carrier) Avg. 2 Avg. 0.8 (within 10dB HBW) 50 DC Ground 17.0 20 84 6.4 19202170
17
10
38
2 DX 170 M
Hz
Bottom
DX-1710-2170-90-17i-3F
Model: A19451705
80
Unit: mm
7/16 (F)
7/16 (F)
17102170 MHz
HINT Extraordinary operating conditions, such as heavy icing or storm wind, may result in the breakage of an antenna. These facts must be considered during the site planning process. The installation team must be properly qualied and also be familiar with the relevant national safety regulations.
HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com
17 10
M 70 21 DX Hz
39
DX-1710-2170-65-18i-2F
Model: A19451801
Electrical Properties Frequency range (MHz) Polarization VSWR Gain (dBi) Side lobe suppression for rst side lobe above horizon (dB) Horizontal 3dB beam width () Vertical 3dB beam width () Isolation between ports (dB) Front to back ratio, copolar (dB) 0 Cross polar ratio (dB) 60 Electrical downtilt () Intermodulation IM3 (dBc) Max. CW input power (W) Impedance () Grounding Dimensions (H x W x D) (mm) Packing dimensions (H x W x D) (mm) Net weight (kg) Bracket weight (kg) Packing weight (kg) Mechanical downtilt () Mast diameter (mm) Radomematerial Operating temperature () Wind load (N) Max. wind velocity (km/h) Connector 17.6 Typ. 20 68 7.3 17101880 18501990 +45 , -45 1.4 17.8 Typ. 20 65 18.0 Typ. 20 62 19202170
6.8 6.2 30 Typ. 30 Typ. 21 Typ. 10 2 -150 (2 x 43 dBm carrier) 200 50 DC Ground 1306 x 155 x 79 1770 x 260 x 160 5.5 3.0 11.3 016
Mechanical Properties
50115 Fiberglass -55 .. +65 Frontal: 150 (v=150 km/h) Lateral: 110 (v=150 km/h) Rear side: 225 (v=150 km/h) 200 2 x 7/16 DIN Female
7/16 (F)
7/16 (F)
17101880 MHz
18501990 MHz
19202170 MHz
HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com
17
10
40
2 DX 170 M
www.huawei.com
Hz
DX-1710-2170-33-21i-M
Model: A19452101
Frequency range (MHz) Polarization VSWR Gain Side lobe suppression for rst side lobe above horizon Horizontal 3dB beam width ()
19202170
() (dBi) () (dBi)
2 20.0 2 18
6 20.1 6 17 35 7.2
10 20.1 10 16
2 20.7 2 18
6 20.5 6 17 31
10 19.8 10 16
Vertical 3dB beam width () Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) Electrical downtilt () Intermodulation IM3 (dBc) Max. CW input power (W) Impedance () Grounding
6.6 6.2 30 Typ. 28 Typ. 20 010 -150 (2 x 43 dBm carrier) 300 50 DC Ground
Mechanical Properties Dimensions (H x W x D) (mm) 1318 x 289 x 85 Packing dimensions (H x W x D) (mm) 1662 x 405 x 175 Net weight (kg) 11.4 Bracket weight (kg) 4.6 Packing weight (kg) 18.4 Mechanical downtilt () Mast diameter (mm) Radomematerial Operating temperature () Wind load (N) Max. wind velocity (km/h) Connector 08 50115 Fiberglass -55 .. +65 Frontal: 285 (v=150 km/h) Lateral: 120 (v=150 km/h) Rear side: 425 (v=150 km/h) 200 2 x 7/16 DIN Female
17102170 X +45 -45
7/16 (F)
7/16 (F)
17101880 MHz
18501990 MHz
19202170 MHz
HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com
17 10
M 70 21 DX Hz
41
DX-1710-2170-33-21i-0F
Model: A19452102
Electrical Properties Frequency range (MHz) Polarization VSWR Gain (dBi) Side lobe suppression for rst side lobe above horizon (dB) Horizontal 3dB beam width () Vertical 3dB beam width () Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) Electrical downtilt () Intermodulation IM3 (dBc) Max. CW input power (W) Impedance () Grounding Dimensions (H x W x D) (mm) Packing dimensions (H x W x D) (mm) Net weight (kg) Bracket weight (kg) Packing weight (kg) Mechanical downtilt () Mast diameter (mm) Radomematerial Operating temperature () Wind load (N) Max. wind velocity (km/h) Connector 20.3 18 35 7.2 17101880 18501990 +45 , -45 1.45 20.7 18 33 20.9 18 31 19202170
6.6 6.2 30 Typ. 28 Typ. 20 0 -150 (2 x 43 dBm carrier) 300 50 DC Ground 1318 x 289 x 85 1662 x 405 x 175 10.4 4.6 18 08
Mechanical Properties
50115 Fiberglass -55 .. +65 Frontal: 285 (v=150 km/h) Lateral: 120 (v=150 km/h) Rear side: 425 (v=150 km/h) 200 2 x 7/16 DIN Female
7/16 (F)
7/16 (F)
17101880 MHz
18501990 MHz
19202170 MHz
HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com
17
10
42
2 DX 170 M
www.huawei.com
Hz
DX-1710-2170-65-21i-0F
Model: A19452100
19202170
Gain (dBi) Side lobe suppression for rst side lobe above horizon (dB) Horizontal 3dB beam width () Vertical 3dB beam width () First null_ll below main beam (dB) Isolation between ports (dB) Front to back ratio, copolar (dB) 0 Cross polar ratio (dB) 60 Electrical downtilt () Intermodulation IM3 (dBc) Max. CW input power (W) Impedance () Grounding
20.0 18 66 4.2
20.8 18 60
Mechanical Properties Dimensions (H x W x D) (mm) 2170 x 155 x 79 Packing dimensions (H x W x D) (mm) 2580 x 250 x 145 Net weight (kg) 9.1 Bracket weight (kg) 3 Packing weight (kg) 14.5 Mechanical downtilt () Mast diameter (mm) Radomematerial Operating temperature () Wind load (N) Max. wind velocity (km/h) Connector 08 50115 Fiberglass -55 .. +65 Frontal:250 (v=150 km/h) Lateral: 185 (v=150 km/h) Rear side: 375 (v=150 km/h) 200 2 x 7/16 DIN Female
17102170 X +45 -45
7/16 (F)
7/16 (F)
17101880 MHz
18501990 MHz
19202170 MHz
HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com
17 10
M 70 21 DX Hz
43
DX-1710-2170-65-21i-2F
Model: A19452103
19202170
Gain (dBi) Side lobe suppression for rst side lobe above horizon (dB) Horizontal 3dB beam width () Vertical 3dB beam width () First null_ll below main beam (dB) Isolation between ports (dB) Front to back ratio, copolar (dB) 0 Cross polar ratio (dB) 60 Electrical downtilt () Intermodulation IM3 (dBc) Max. CW input power (W) Impedance () Grounding
20.0 16 66 4.5
20.8 16 60
Mechanical Properties Dimensions (H x W x D) (mm) 2170 x 155 x 79 Packing dimensions (H x W x D) (mm) 2580 x 250 x 145 Net weight (kg) 9.1 Bracket weight (kg) 3 Packing weight (kg) 15 Mechanical downtilt () Mast diameter (mm) Radomematerial Operating temperature () Wind load (N) Max. wind velocity (km/h) Connector 08 50115 Fiberglass -55 .. +65 Frontal:250 (v=150 km/h) Lateral: 185 (v=150 km/h) Rear side: 375 (v=150 km/h) 200 2 x 7/16 DIN Female
17102170 X +45 -45
7/16 (F)
7/16 (F)
17101880 MHz
18501990 MHz
19202170 MHz
HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com
17
10
44
2 DX 170 M
www.huawei.com
Hz
DX-1710-2200-65-15.5i-M
Model: A19451505
Preliminary Issue
Electrical Properties Frequency range (MHz) Polarization Electrical downtilt () Gain (dBi) Side lobe suppression for rst side lobe above horizon (Typ.) (dB) Horizontal 3dB beam width () Vertical 3dB beam width () VSWR Isolation between ports (dB) Front to back ratio, copolar (dB) 0 Cross polar ratio (dB) 60 Max. power per input (W) Intermodulation IM3 (dBc) Squint () Tracking (dB) Impedance () Grounding 0 14.9 0 17 6 15.0 6 16 67 14 12 14.6 12 15 17101880 17102200 18501990 19202170 +45 , -45 012 , continuously adjustable 0 6 12 0 6 12 15.3 15.4 14.8 15.4 15.6 15.0 0 6 12 0 6 12 17 16 15 17 16 15 64 61 13 12.6 < 1.5 30 Typ. 28 Typ. 20 Typ. 10 300 (at 50 ambient temperature) -153 (2 x 43 dBm carrier) Typ. 3 Avg. 2 (within 10dB HBW) 50 DC Ground Mechanical Properties Antenna dimensions (H x W x D) (mm) Packing dimensions (H x W x D) (mm) Antenna net weight (kg) Bracket weight (kg) Packing weight (kg) Mechanical downtilt () Mast diameter (mm) Radome material Radome colour Operational temperature () Wind load (N) Max. operational wind speed (km/h) Survival wind speed (km/h) Connector Connector position 730 x 155 x 89 1227 x 253 x 200 5.3 2.6 9.5 016 50115 Fiberglass Light grey -55 .. +65 Frontal: 160 (at 150 km/h) Lateral: 80 (at 150 km/h) Rear side: 185 (at 150 km/h) 150 200 2 x 7/16 DIN Female Bottom 21702200
0 15.4 0 17
6 15.5 6 16 60 11.5
12 15.0 12 15
HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com
17 10
M 00 22 DX Hz
45
DX-1710-2200-65-15.5i-3F
Model: A19451601
Electrical Properties Frequency range (MHz) Polarization Electrical downtilt () Gain (dBi) Side lobe suppression for rst side lobe above horizon (dB) Horizontal 3dB beam width () Vertical 3dB beam width () VSWR Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) Max. power per input (W) Intermodulation IM3 (dBc) Squint () Tracking (dB) Impedance () Grounding Mechanical Properties Antenna dimensions (H x W x D) (mm) Packing dimensions (H x W x D) (mm) Antenna net weight (kg) Bracket weight (kg) Packing weight (kg) Mechanical downtilt () Mast diameter (mm) Radome material Radome colour Operational temperature () Wind load (N) Max. operational wind speed (km/h) Survival wind speed (km/h) Connector Connector position 702 x 155 x 89 1103 x 253 x 200 3.6 2.6 8.2 020 50115 Fiberglass Light grey -55 .. +65 Frontal: 150 (at 150 km/h) Lateral: 75 (at 150 km/h) Rear side: 175 (at 150 km/h) 150 200 2 x 7/16 DIN Female 0 60 15.3 18 67 13.3 15.7 20 64 12.5 < 1.4 30 Typ. 30 Typ. 22 Typ. 10 300 (at 50 ambient temperature) -153 (2 x 43 dBm carrier) Avg. 1.5 Avg. 1.7 (within 10dB HBW) 50 DC Ground 17102200 17101880 18501990 +45, -45 3, Fixed 16.2 20 61 11.8 16.0 20 60 11.3 19202170 21702200
17
10
46
2 DX 200 M
Hz
Bottom
DX-1710-2200-65-15.5i-3F
Model: A19451601
91
Unit: mm
7/16 (F)
7/16 (F)
17102200 MHz HINT Extraordinary operating conditions, such as heavy icing or storm wind, may result in the breakage of an antenna. These facts must be considered during the site planning process. The installation team must be properly qualied and also be familiar with the relevant national safety regulations.
HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com
17 10
M 00 22 DX Hz
47
DX-1710-2200-65-15.5i-6F
Model: A19451602
Electrical Properties Frequency range (MHz) Polarization Electrical downtilt () Gain (dBi) Side lobe suppression for rst side lobe above horizon (dB) Horizontal 3dB beam width () Vertical 3dB beam width () VSWR Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) Max. power per input (W) Intermodulation IM3 (dBc) Squint () Tracking (dB) Impedance () Grounding Mechanical Properties Antenna dimensions (H x W x D) (mm) Packing dimensions (H x W x D) (mm) Antenna net weight (kg) Bracket weight (kg) Packing weight (kg) Mechanical downtilt () Mast diameter (mm) Radome material Radome colour Operational temperature () Wind load (N) Max. operational wind speed (km/h) Survival wind speed (km/h) Connector Connector position 702 x 155 x 89 1103 x 253 x 200 3.6 2.6 8.2 020 50115 Fiberglass Light grey -55 .. +65 Frontal: 150 (at 150 km/h) Lateral: 75 (at 150 km/h) Rear side: 175 (at 150 km/h) 150 200 2 x 7/16 DIN Female 0 60 15.2 18 67 13.3 15.6 20 64 12.5 < 1.4 30 Typ. 30 Typ. 22 Typ. 10 300 (at 50 ambient temperature) -153 (2 x 43 dBm carrier) Avg. 1.8 Avg. 2.0 (within 10dB HBW) 50 DC Ground 17102200 17101880 18501990 +45, -45 6, Fixed 16.1 20 61 11.8 16.0 20 60 11.3 19202170 21702200
17
10
48
2 DX 200 M
Hz
Bottom
DX-1710-2200-65-15.5i-6F
Model: A19451602
91
Unit: mm
7/16 (F)
7/16 (F)
17102200 MHz HINT Extraordinary operating conditions, such as heavy icing or storm wind, may result in the breakage of an antenna. These facts must be considered during the site planning process. The installation team must be properly qualied and also be familiar with the relevant national safety regulations.
HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com
17 10
M 00 22 DX Hz
49
DX-1710-2200-65-18i-M
Model: A19451811
Electrical Properties Frequency range (MHz) Polarization Electrical downtilt () Gain (dBi) Side lobe suppression for rst side lobe above horizon (Typ.) (dB) Horizontal 3dB beam width () Vertical 3dB beam width () VSWR Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) Max. power per input (W) Intermodulation IM3 (dBc) Squint () Tracking (dB) Impedance () Grounding Mechanical Properties Antenna dimensions (H x W x D) (mm) Packing dimensions (H x W x D) (mm) Antenna net weight (kg) Bracket weight (kg) Packing weight (kg) Mechanical downtilt () Mast diameter (mm) Radome material Radome colour Operational temperature () Wind load (N) Max. operational wind speed (km/h) Survival wind speed (km/h) Connector Connector position 1311 x 155 x 89 1697 x 252 x 200 6.2 2.6 11.5 012 50115 Fiberglass Light grey -55 .. +65 Frontal: 315 (at 150 km/h) Lateral: 155 (at 150 km/h) Rear side: 360 (at 150 km/h) 150 200 2 x 7/16 DIN Female Bottom 0 60 0 17.2 0 20 5 17.6 5 16 67 7.5 10 17.4 10 18 0 17.7 0 20 5 18.0 5 20 64 7.0 < 1.5 30 Typ. 30 Typ. 22 10 500 (at 50 ambient temperature) -153 (2 x 43 dBm carrier) Avg. 1.2 Avg. 1.2 (within 10dB HBW) 50 DC Ground 17102200 17101880 18501990 +45, -45 010, continuously adjustable 10 17.7 10 18 0 18.0 0 18 5 18.1 5 17 61 6.7 10 17.9 10 16 0 18.0 0 18 5 18.2 5 18 60 6.2 10 17.9 10 16 19202170 21702200
17
10
50
2 DX 200 M
Hz
DX-1710-2200-65-18i-M
Model: A19451811
34
46
34
Unit: mm
17102200 X +45
-45
7/16 (F)
7/16 (F)
17102200 MHz HINT Extraordinary operating conditions, such as heavy icing or storm wind, may result in the breakage of an antenna. These facts must be considered during the site planning process. The installation team must be properly qualied and also be familiar with the relevant national safety regulations.
HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com
17 10
M 00 22 DX Hz
51
DX-1710-2690-65-18i-M-R
Model: A264518R0
Preliminary Issue
Electrical Properties Frequency range (MHz) Polarization Electrical downtilt () Gain (dBi) Side lobe suppression for rst side lobe above horizon (Typ.) (dB) Horizontal 3dB beam width () Vertical 3dB beam width () VSWR Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) Max. power per input (W) Intermodulation IM3 (dBc) Squint () Tracking (dB) Impedance () Grounding Mechanical Properties Antenna dimensions (H x W x D) (mm) Packing dimensions (H x W x D) (mm) Antenna net weight (kg) Bracket weight (kg) Packing weight (kg) Mechanical downtilt () Mast diameter (mm) Radome material Radome colour Operational temperature () Wind load (N) Max. operational wind speed (km/h) Survival wind speed (km/h) Connector Connector position RET Type RET Protocols RET Connector 1425 x 155 x 89 1730 x 252 x 200 7.6 2.6 13.5 012 50115 Fiberglass Light grey -55 .. +65 Frontal: 320 (at 150 km/h) Lateral: 170 (at 150 km/h) Rear side: 395 (at 150 km/h) 150 200 2 x 7/16 DIN Female Bottom Internal motor AISG 1.1 / AISG 2.0 2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female 0 60 0 17.3 0 18 6 17.4 6 17 66 6.5 12 17.2 12 16 0 17.6 0 18 6 17.8 6 17 63 6.2 < 1.5 30 Typ. 30 Typ. 20 Typ. 10 250 (at 50 ambient temperature) -153 (2 x 43 dBm carrier) Typ. 3 Avg. 2 (within 10dB HBW) 50 DC Ground 17102690 17101990 19202200 +45, -45 012, continuously adjustable 12 17.5 12 16 0 17.7 0 18 6 18.0 6 17 60 5.5 12 17.5 12 16 0 17.8 0 17 6 18.0 6 17 60 4.7 12 17.3 12 16 22002490 24902690
17
10
52
2 DX 690 M
Hz
DX-1710-2690-65-18i-M-R
Model: A264518R0
Preliminary Issue
RET Properties RET Type RET Protocols Input voltage range (V) Power consumption (W) Adjustment time (full range) (min) Calibration time (min) RET Connector Pin assignment according AISG 1 DC 2 n/c Internal motor AISG 1.1 / AISG 2.0 DC 1030 < 10 (motor activated) < 0.5 (stand by) < 1.5 (typically, depending on antenna type) < 3 (typically, depending on antenna type) 2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female 3 RS-485B 4 n/c 5 6 7 8 n/c RS-485A DC in/out DC return
Standards: y EN 60950-1 (Safety) y EN 55022 (Emission) y EN 55024 (Immunity) y ETSI EN300386 (1.4.1) y FCC part15
HINT Before the installation, check whether the antenna and base station support the same AISG protocol. If not, contact the technical support personnel of Huawei.
HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com
17 10
M 90 26 DX Hz
53
DX-1710-2200-65-18i-0F
Model: A19451800v01
Electrical Properties Frequency range (MHz) Polarization Electrical downtilt () Gain (dBi) Side lobe suppression for rst side lobe above horizon (dB) Horizontal 3dB beam width () Vertical 3dB beam width () VSWR Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) Max. power per input (W) Intermodulation IM3 (dBc) Max. power per input (W) Intermodulation IM3 (dBc) Impedance () Grounding Mechanical Properties Antenna dimensions (H x W x D) (mm) Packing dimensions (H x W x D) (mm) Antenna net weight (kg) Bracket weight (kg) Packing weight (kg) Mechanical downtilt () Mast diameter (mm) Radome material Radome colour Operational temperature () Wind load (N) Max. operational wind speed (km/h) Survival wind speed (km/h) Connector Connector position 1311 x 155 x 89 1697 x 252 x 200 5.5 2.6 11.7 012 50115 Fiberglass Light grey -55 .. +65 Frontal: 315 (at 150 km/h) Lateral: 155 (at 150 km/h) Rear side: 360 (at 150 km/h) 150 200 2 x 7/16 DIN Female 0 60 17.6 18 67 7.0 18.0 19 64 6.7 < 1.4 30 Typ. 30 Typ. 22 Typ. 10 300 (at 50 ambient temperature) -153 (2 x 43 dBm carrier) Avg. 1.2 Avg. 1.2 (within 10dB HBW) 50 DC Ground 17102200 17101880 18501990 +45, -45 0, Fixed 18.3 19 62 6.4 18.3 19 60 6.0 19202170 21702200
17
10
54
2 DX 200 M
Hz
Bottom
DX-1710-2200-65-18i-0F
Model: A19451800v01
91
Unit: mm
7/16 (F)
7/16 (F)
17102200 MHz HINT Extraordinary operating conditions, such as heavy icing or storm wind, may result in the breakage of an antenna. These facts must be considered during the site planning process. The installation team must be properly qualied and also be familiar with the relevant national safety regulations.
HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com
17 10
M 00 22 DX Hz
55
DX-1710-2200-65-18i-3F
Model: A19451810v01
Electrical Properties Frequency range (MHz) Polarization Electrical downtilt () Gain (dBi) Side lobe suppression for rst side lobe above horizon (dB) Horizontal 3dB beam width () Vertical 3dB beam width () VSWR Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) Max. power per input (W) Intermodulation IM3 (dBc) Max. power per input (W) Intermodulation IM3 (dBc) Impedance () Grounding Mechanical Properties Antenna dimensions (H x W x D) (mm) Packing dimensions (H x W x D) (mm) Antenna net weight (kg) Bracket weight (kg) Packing weight (kg) Mechanical downtilt () Mast diameter (mm) Radome material Radome colour Operational temperature () Wind load (N) Max. operational wind speed (km/h) Survival wind speed (km/h) Connector Connector position 1311 x 155 x 89 1697 x 252 x 200 5.5 2.6 11.7 012 50115 Fiberglass Light grey -55 .. +65 Frontal: 315 (at 150 km/h) Lateral: 155 (at 150 km/h) Rear side: 360 (at 150 km/h) 150 200 2 x 7/16 DIN Female 0 60 17.7 19 67 7.0 18.1 19 64 6.7 < 1.4 30 Typ. 30 Typ. 22 Typ. 10 300 (at 50 ambient temperature) -153 (2 x 43 dBm carrier) Avg. 1.2 Avg. 1.5 (within 10dB HBW) 50 DC Ground 17102200 17101880 18501990 +45, -45 3, Fixed 18.4 19 62 6.4 18.2 19 60 6.0 19202170 21702200
17
10
56
2 DX 200 M
Hz
Bottom
DX-1710-2200-65-18i-3F
Model: A19451810v01
91
Unit: mm
7/16 (F)
7/16 (F)
17102200 MHz HINT Extraordinary operating conditions, such as heavy icing or storm wind, may result in the breakage of an antenna. These facts must be considered during the site planning process. The installation team must be properly qualied and also be familiar with the relevant national safety regulations.
HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com
17 10
M 00 22 DX Hz
57
DX-1710-2200-65-18i-6F
Model: A19451802v01
Electrical Properties Frequency range (MHz) Polarization Electrical downtilt () Gain (dBi) Side lobe suppression for rst side lobe above horizon (dB) Horizontal 3dB beam width () Vertical 3dB beam width () VSWR Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) Max. power per input (W) Intermodulation IM3 (dBc) Max. power per input (W) Intermodulation IM3 (dBc) Impedance () Grounding Mechanical Properties Antenna dimensions (H x W x D) (mm) Packing dimensions (H x W x D) (mm) Antenna net weight (kg) Bracket weight (kg) Packing weight (kg) Mechanical downtilt () Mast diameter (mm) Radome material Radome colour Operational temperature () Wind load (N) Max. operational wind speed (km/h) Survival wind speed (km/h) Connector Connector position 1311 x 155 x 89 1697 x 252 x 200 5.5 2.6 11.7 012 50115 Fiberglass Light grey -55 .. +65 Frontal: 315 (at 150 km/h) Lateral: 155 (at 150 km/h) Rear side: 360 (at 150 km/h) 150 200 2 x 7/16 DIN Female 0 60 17.7 18 67 7.0 18.1 20 64 6.7 < 1.4 30 Typ. 30 Typ. 22 Typ. 10 300 (at 50 ambient temperature) -153 (2 x 43 dBm carrier) Avg. 1.5 Avg. 2.0 (within 10dB HBW) 50 DC Ground 17102200 17101880 18501990 +45, -45 6, Fixed 18.4 20 62 6.4 18.2 20 60 6.0 19202170 21702200
17
10
58
2 DX 200 M
Hz
Bottom
DX-1710-2200-65-18i-6F
Model: A19451802v01
91
Unit: mm
7/16 (F)
7/16 (F)
17102200 MHz HINT Extraordinary operating conditions, such as heavy icing or storm wind, may result in the breakage of an antenna. These facts must be considered during the site planning process. The installation team must be properly qualied and also be familiar with the relevant national safety regulations.
HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com
17 10
M 00 22 DX Hz
59
DX-1710-2200-65-19.5i-M
Model: A19451902
Electrical Properties Frequency range (MHz) Polarization Electrical downtilt () Gain (dBi) Side lobe suppression for rst side lobe above horizon (Typ.) (dB) Horizontal 3dB beam width () Vertical 3dB beam width () VSWR Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) Max. power per input (W) Intermodulation IM3 (dBc) Squint () Tracking (dB) Impedance () Grounding Mechanical Properties Antenna dimensions (H x W x D) (mm) Packing dimensions (H x W x D) (mm) Antenna net weight (kg) Bracket weight (kg) Packing weight (kg) Mechanical downtilt () Mast diameter (mm) Radome material Radome colour Operational temperature () Wind load (N) Max. operational wind speed (km/h) Survival wind speed (km/h) Connector Connector position 1954 x 155 x 89 2357 x 253 x 200 8.4 2.6 14.3 08 50115 Fiberglass Light grey -55 .. +65 Frontal: 505 (at 150 km/h) Lateral: 250 (at 150 km/h) Rear side: 575 (at 150 km/h) 150 200 2 x 7/16 DIN Female Bottom 0 60 0 18.6 0 20 3 18.7 3 17 67 5.0 6 18.5 6 16 0 19.0 0 20 3 19.1 3 17 64 4.7 < 1.5 30 Typ. 32 Typ. 25 Typ. 10 300 (at 50 ambient temperature) -153 (2 x 43 dBm carrier) Avg. 1.5 Avg. 1.0 (within 10dB HBW) 50 DC Ground 17102200 17101880 18501990 +45, -45 06, continuously adjustable 6 18.9 6 16 0 19.2 0 20 3 19.4 3 18 62 4.5 6 19.1 6 17 0 19.4 0 20 3 19.5 3 18 60 4.1 6 18.8 6 17 19202170 21702200
17
10
60
2 DX 200 M
Hz
DX-1710-2200-65-19.5i-M
Model: A19451902
34
Unit: mm 46 34
7/16 (F)
7/16 (F)
17102200 MHz HINT Extraordinary operating conditions, such as heavy icing or storm wind, may result in the breakage of an antenna. These facts must be considered during the site planning process. The installation team must be properly qualied and also be familiar with the relevant national safety regulations.
HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com
17 10
M 00 22 DX Hz
61
DX-1710-2690-65-18i-M
Model: A26451800
Electrical Properties Frequency range (MHz) Polarization Electrical downtilt () Gain (dBi) Side lobe suppression for rst side lobe above horizon (Typ.) (dB) Horizontal 3dB beam width () Vertical 3dB beam width () VSWR Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) Max. power per input (W) Intermodulation IM3 (dBc) Squint () Tracking (dB) Impedance () Grounding Mechanical Properties Antenna dimensions (H x W x D) (mm) Packing dimensions (H x W x D) (mm) Antenna net weight (kg) Bracket weight (kg) Packing weight (kg) Mechanical downtilt () Mast diameter (mm) Radome material Radome colour Operational temperature () Wind load (N) Max. operational wind speed (km/h) Survival wind speed (km/h) Connector Connector position 1410 x 155 x 89 2027 x 259 x 185 7.3 2.6 13.0 012 50115 Fiberglass Light grey -55 .. +65 Frontal: 340 (at 150 km/h) Lateral: 170 (at 150 km/h) Rear side: 390 (at 150 km/h) 150 200 2 x 7/16 DIN Female (Long neck) Bottom 0 60 0 17.0 0 18 5 17.1 5 17 69 6.6 10 16.9 10 16 0 17.4 0 18 5 17.6 5 17 65 6.0 < 1.5 30 Typ. 27 Typ. 20 Typ. 10 250 (at 50 ambient temperature) -153 (2 x 43 dBm carrier) Avg. 3 Typ. 2 (within 10dB HBW) 50 DC Ground 17102690 17101990 19202200 +45, -45 010, continuously adjustable 10 17.3 10 16 0 17.9 0 18 5 18.1 5 17 62 5.4 10 17.7 10 16 0 18.0 0 18 5 18.1 5 17 60 4.9 10 17.5 10 16 22002490 24902690
17
10
62
2 DX 690 M
Hz
DX-1710-2690-65-18i-M
Model: A26451800
Unit: mm 54 54
7/16 (F)
7/16 (F)
22002690 MHz
Extraordinary operating conditions, such as heavy icing or storm wind, may result in the breakage of an antenna. These facts must be considered during the site planning process. The installation team must be properly qualied and also be familiar with the relevant national safety regulations.
HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com
17 10
M 90 26 DX Hz
63
DX-1710-2200-65-18i-M-R
Model: A194518R0
Preliminary Issue
Electrical Properties Frequency range (MHz) Polarization Electrical downtilt () Gain (dBi) Side lobe suppression for rst side lobe above horizon (Typ.) (dB) Horizontal 3dB beam width () Vertical 3dB beam width () VSWR Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) Max. power per input (W) Intermodulation IM3 (dBc) Squint () Tracking (dB) Impedance () Grounding Mechanical Properties Antenna dimensions (H x W x D) (mm) Packing dimensions (H x W x D) (mm) Antenna net weight (kg) Bracket weight (kg) Packing weight (kg) Mechanical downtilt () Mast diameter (mm) Radome material Radome colour Operational temperature () Wind load (N) Max. operational wind speed (km/h) Survival wind speed (km/h) Connector Connector position RET Type RET Protocols RET Connector 1315 x 155 x 89 1807 x 222 x 160 7 2.6 11 012 50115 Fiberglass Light grey -40 .. +65 Frontal: 150 (at 150 km/h) Lateral: 110 (at 150 km/h) Rear side: 225 (at 150 km/h) 150 200 2 x 7/16 DIN Female Bottom Internal motor AISG 1.1 / AISG 2.0 2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female 0 60 0 17.2 0 18 5 17.4 5 15 67 7.5 10 17.1 10 16 0 17.5 0 18 5 17.8 5 17 64 7.0 < 1.5 30 Typ. 30 Typ. 20 Typ. 10 300 (at 50 ambient temperature) -153 (2 x 43 dBm carrier) Typ. 3 Typ. 3 (within 10dB HBW) 50 DC Ground 17102200 17101880 18501990 +45, -45 010 , continuously adjustable 10 17.4 10 16 0 17.8 0 18 5 18.1 5 17 61 6.7 10 17.6 10 16 0 17.4 0 18 5 17.6 5 17 60 6.2 10 17.5 10 16 19202170 21702200
17
10
64
2 DX 200 M
Hz
DX-1710-2200-65-18i-M-R
Model: A194518R0
Preliminary Issue
RET Properties RET Type RET Protocols Input voltage range (V) Power consumption (W) Adjustment time (full range) (min) Calibration time (min) RET Connector Pin assignment according AISG 1 DC 2 n/c Internal motor AISG 1.1 / AISG 2.0 DC 1030 < 10 (motor activated) < 0.5 (stand by) < 1.5 (typically, depending on antenna type) < 3 (typically, depending on antenna type) 2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female 3 RS-485B 4 n/c 5 6 7 8 n/c RS-485A DC in/out DC return
Standards: y EN 60950-1 (Safety) y EN 55022 (Emission) y EN 55024 (Immunity) y ETSI EN300386 (1.4.1) y FCC part15
HINT Before the installation, check whether the antenna and base station support the same AISG protocol. If not, contact the technical support personnel of Huawei.
HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com
17 10
M 00 22 DX Hz
65
DX-1710-2690-65-19.5i-M
Model: A26451900
Electrical Properties Frequency range (MHz) Polarization Electrical downtilt () Gain (dBi) Side lobe suppression for rst side lobe above horizon (Typ.) (dB) Horizontal 3dB beam width () Vertical 3dB beam width () VSWR Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) Max. power per input (W) Intermodulation IM3 (dBc) Squint () Tracking (dB) Impedance () Grounding Mechanical Properties Antenna dimensions (H x W x D) (mm) Packing dimensions (H x W x D) (mm) Antenna net weight (kg) Bracket weight (kg) Packing weight (kg) Mechanical downtilt () Mast diameter (mm) Radome material Radome colour Operational temperature () Wind load (N) Max. operational wind speed (km/h) Survival wind speed (km/h) Connector Connector position 1932 x 155 x 89 2417 x 292 x 195 9.0 2.6 15.8 08 50115 Fiberglass Light grey -55 .. +65 Frontal: 490 (at 150 km/h) Lateral: 240 (at 150 km/h) Rear side: 560 (at 150 km/h) 150 200 2 x 7/16 DIN Female (Long neck) Bottom 0 60 0 18.0 0 18 3 18.2 3 18 69 4.9 6 18.1 6 15 0 18.3 0 19 3 18.6 3 18 65 4.5 < 1.5 30 Typ. 27 Typ. 20 Typ. 10 250 (at 50 ambient temperature) -153 (2 x 43 dBm carrier) Typ. 4 Avg. 2 (within 10dB HBW) 50 DC Ground 17102690 17101990 19202200 +45, -45 06, continuously adjustable 6 18.5 6 16 0 18.7 0 18 3 19.1 3 18 62 4.1 6 19.0 6 18 0 19.0 0 17 3 19.4 3 17 60 3.7 6 19.1 6 16 22002490 24902690
17
10
66
2 DX 690 M
Hz
DX-1710-2690-65-19.5i-M
Model: A26451900
Unit: mm 54 54
7/16 (F)
7/16 (F)
17102200 MHz
22002690 MHz
HINT Extraordinary operating conditions, such as heavy icing or storm wind, may result in the breakage of an antenna. These facts must be considered during the site planning process. The installation team must be properly qualied and also be familiar with the relevant national safety regulations.
HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com
17 10
M 90 26 DX Hz
67
DXX-790-862/880-960-65/65-16i/16.5i-M/M-R
Model: ADU4516R0
Preliminary Issue
Electrical Properties 790862 Polarization Electrical downtilt () Gain (dBi) Side lobe suppression for rst side lobe above horizon (Typ.) (dB) Horizontal 3dB beam width () Vertical 3dB beam width () VSWR Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) Max. power per input (W) Intermodulation IM3 (dBc) Impedance () Grounding Mechanical Properties Antenna dimensions (H x W x D) (mm) Packing dimensions (H x W x D) (mm) Antenna net weight (kg) Bracket weight (kg) Packing weight (kg) Mechanical downtilt () Mast diameter (mm) Radome material Radome colour Operational temperature () Wind load (N) Max. operational wind speed (km/h) Survival wind speed (km/h) Connector Connector position RET Type RET Protocols RET Connector 1990 x 259 x 135 2282 x 398 x 240 24 4.6 32.6 012 50115 Fiberglass Light grey -40 .. +65 Frontal: 685 (at 150 km/h) Lateral: 355 (at 150 km/h) Rear side: 910 (at 150 km/h) 150 200 4 x 7/16 DIN Female Bottom Internal motor AISG 1.1 / AISG 2.0
79 0 86 2/ 88 DX 0 96 X 0M Hz
0 15.6 0 17
6 15.8 6 16 67 10.8
12 15.4 12 16
0 16.1 0 17
6 16.3 6 16 63 9.4
12 15.9 12 15
< 1.5 30 Typ. 28 Typ. 20 10 400 (at 50 ambient temperature) -153 (2 x 43 dBm carrier) 50 DC Ground Typ. 30
0 60
2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female
68
DXX-790-862/880-960-65/65-16i/16.5i-M/M-R
Model: ADU4516R0
Preliminary Issue
RET Properties RET Type RET Protocols Input voltage range (V) Power consumption (W) Adjustment time (full range) (min) Calibration time (min) RET Connector Pin assignment according AISG 1 DC 2 n/c Internal motor AISG 1.1 / AISG 2.0 DC 1030 < 10 (motor activated) < 0.5 (stand by) < 1.5 (typically, depending on antenna type) < 3 (typically, depending on antenna type) 2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female 3 RS-485B 4 n/c 5 6 7 8 n/c RS-485A DC in/out DC return
Standards: y EN 60950-1 (Safety) y EN 55022 (Emission) y EN 55024 (Immunity) y ETSI EN300386 (1.4.1) y FCC part15
HINT Before the installation, check whether the antenna and base station support the same AISG protocol. If not, contact the technical support personnel of Huawei.
HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com
Issue: 2012-06-01
69
DXX-790-862/880-960-65/65-17i/17.5i-M/M-R
Model: ADU4517R0
Preliminary Issue
Electrical Properties 790862 Polarization Electrical downtilt () Gain (dBi) Side lobe suppression for rst side lobe above horizon (Typ.) (dB) Horizontal 3dB beam width () Vertical 3dB beam width () VSWR Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) Max. power per input (W) Intermodulation IM3 (dBc) Impedance () Grounding Mechanical Properties Antenna dimensions (H x W x D) (mm) Packing dimensions (H x W x D) (mm) Antenna net weight (kg) Bracket weight (kg) Packing weight (kg) Mechanical downtilt () Mast diameter (mm) Radome material Radome colour Operational temperature () Wind load (N) Max. operational wind speed (km/h) Survival wind speed (km/h) Connector Connector position RET Type RET Protocols RET Connector 2565 x 259 x 135 2867 x 397 x 220 27 5.6 38 08 50115 Fiberglass Light grey -40 .. +65 Frontal: 920 (at 150 km/h) Lateral: 475 (at 150 km/h) Rear side: 1220 (at 150 km/h) 150 200 4 x 7/16 DIN Female Bottom Internal motor AISG 1.1 / AISG 2.0
79 0 86 2/ 88 DX 0 96 X 0M Hz
0 16.5 0 17
5 16.7 5 16 67 8.3
10 16.4 10 15
0 17.1 0 17
5 17.3 5 16 63 7.2
10 17.0 10 15
< 1.5 30 Typ. 30 Typ. 20 10 400 (at 50 ambient temperature) -153 (2 x 43 dBm carrier) 50 DC Ground
0 60
2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female
70
DXX-790-862/880-960-65/65-17i/17.5i-M/M-R
Model: ADU4517R0
Preliminary Issue
RET Properties RET Type RET Protocols Input voltage range (V) Power consumption (W) Adjustment time (full range) (min) Calibration time (min) RET Connector Pin assignment according AISG 1 DC 2 n/c Internal motor AISG 1.1 / AISG 2.0 DC 1030 < 10 (motor activated) < 0.5 (stand by) < 1.5 (typically, depending on antenna type) < 3 (typically, depending on antenna type) 2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female 3 RS-485B 4 n/c 5 6 7 8 n/c RS-485A DC in/out DC return
Standards: y EN 60950-1 (Safety) y EN 55022 (Emission) y EN 55024 (Immunity) y ETSI EN300386 (1.4.1) y FCC part15
HINT Before the installation, check whether the antenna and base station support the same AISG protocol. If not, contact the technical support personnel of Huawei.
HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com
Issue: 2012-06-01
71
DXX-790-960/1710-2180-65/65-14i/17i-M/M
Model: ADU451503
Electrical Properties Frequency range (MHz) Polarization Electrical downtilt () Gain (dBi) 0 014, continuously adjustable 7 7 18 69 15.7 14 14 17 0 0 18 7 7 18 66 15.0 14 14 17 0 0 17 7 7 15 64 14.0 < 1.5 Intra-system: 30 Inter-system (790 - 960 / 1710 - 2180 MHz): 40 Typ. 28 Typ. 25 Typ. 10 500 (at 50 ambient temperature) Avg. 2.0 Avg. 2.0 (within 10dB HBW) 50 DC Ground Mechanical Properties Antenna dimensions (H x W x D) (mm) Packing dimensions (H x W x D) (mm) Antenna net weight (kg) Bracket weight (kg) Packing weight (kg) Mechanical downtilt () Mast diameter (mm) Radome material Radome colour Operational temperature () Wind load (N) Max. operational wind speed (km/h) Survival wind speed (km/h) Connector Connector position 1360 x 259 x 135 1784 x 392 x 230 13.7 4.6 22.2 016 50115 Fiberglass Light grey -55 .. +65 Frontal: 440 (at 150 km/h) Lateral: 230 (at 150 km/h) Rear side: 585 (at 150 km/h) 150 200 4 x 7/16 DIN Female Bottom
79 0 96 0/ 17 1 DX 0 21 X 80 M Hz
14.4 14.3 14.0 14.5 14.5 14.1 14.5 14.5 14.1 16.4 16.5 16.3 17.0 17.0 16.2 17.2 17.3 16.4
Side lobe suppression for rst side 0 lobe above horizon (Typ.) (dB) 18 Horizontal 3dB beam width () Vertical 3dB beam width () VSWR Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) 0 60
Typ. 28 Typ. 20 Typ. 10 300 (at 50 ambient temperature) -153 (2 x 43 dBm carrier)
Max. power per input (W) Intermodulation IM3 (dBc) Squint () Tracking (dB) Impedance () Grounding
72
DXX-790-960/1710-2180-65/65-14i/17i-M/M
Model: ADU451503
56
55
70
Unit: mm
7/16 (F)
7/16 (F)
7/16 (F)
7/16 (F)
17102180 MHz
Extraordinary operating conditions, such as heavy icing or storm wind, may result in the breakage of an antenna. These facts must be considered during the site planning process. The installation team must be properly qualied and also be familiar with the relevant national safety regulations.
HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com
Hz M 80 21 10 17 XX 0/ D 96 0 79
73
DXX-790-960/1710-2180-65/65-16i/18.5i-M/M
Model: ADU451602v01
Electrical Properties Frequency range (MHz) Polarization Electrical downtilt () Gain (dBi) 0 012, continuously adjustable 6 6 17 69 10.6 12 12 15 0 0 20 6 6 18 66 10.2 12 12 15 0 0 17 6 6 18 64 9.5 < 1.5 Intra-system: 30 Inter-system (790 - 960 / 1710 - 2180 MHz): 40 Typ. 28 Typ. 25 Typ. 10 500 (at 50 ambient temperature) Avg. 2.5 Avg. 2.0 (within 10dB HBW) 50 DC Ground Mechanical Properties Antenna dimensions (H x W x D) (mm) Packing dimensions (H x W x D) (mm) Antenna net weight (kg) Bracket weight (kg) Packing weight (kg) Mechanical downtilt () Mast diameter (mm) Radome material Radome colour Operational temperature () Wind load (N) Max. operational wind speed (km/h) Survival wind speed (km/h) Connector Connector position 1936 x 259 x 135 2357 x 392 x 230 17.3 4.6 27.3 012 50115 Fiberglass Light grey -55 .. +65 Frontal: 665 (at 150 km/h) Lateral: 345 (at 150 km/h) Rear side: 880 (at 150 km/h) 150 200 4 x 7/16 DIN Female Bottom
79 0 96 0/ 17 1 DX 0 21 X 80 M Hz
15.7 15.7 15.3 16.0 16.0 15.5 16.2 16.0 15.6 18.0 18.5 18.3 18.2 18.7 18.3 18.3 18.7 18.3
Side lobe suppression for rst side 0 lobe above horizon (Typ.) (dB) 20 Horizontal 3dB beam width () Vertical 3dB beam width () VSWR Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) 0 60
Typ. 30 Typ. 20 Typ. 10 300 (at 50 ambient temperature) -153 (2 x 43 dBm carrier)
Max. power per input (W) Intermodulation IM3 (dBc) Squint () Tracking (dB) Impedance () Grounding
74
DXX-790-960/1710-2180-65/65-16i/18.5i-M/M
Model: ADU451602v01
56
55
70
Unit: mm
7/16 (F)
7/16 (F)
7/16 (F)
7/16 (F)
17102180 MHz
Extraordinary operating conditions, such as heavy icing or storm wind, may result in the breakage of an antenna. These facts must be considered during the site planning process. The installation team must be properly qualied and also be familiar with the relevant national safety regulations.
HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com
Hz M 80 21 10 17 XX 0/ D 96 0 79
75
DXX-790-960/1710-2180-65/65-16i/18.5i-M/M-R
Model: ADU4518R3
Preliminary Issue
Electrical Properties Frequency range (MHz) Polarization Electrical downtilt () Gain (dBi) 0 012 , continuously adjustable 6 6 16 69 11.3 12 12 16 0 0 17 6 6 16 66 10.7 12 12 16 0 0 17 6 6 16 65 10 < 1.5 Intra-system: 30 Inter-system (790960 / 17102180 MHz): 40 Typ. 27 Typ. 20 Typ. 10 500 (at 50 ambient temperature) 50 DC Ground Mechanical Properties Antenna dimensions (H x W x D) (mm) Packing dimensions (H x W x D) (mm) Antenna net weight (kg) Bracket weight (kg) Packing weight (kg) Mechanical downtilt () Mast diameter (mm) Radome material Radome colour Operational temperature () Wind load (N) Max. operational wind speed (km/h) Survival wind speed (km/h) Connector Connector position RET Type RET Protocols RET Connector 1940 x 259 x 135 2372 x 395 x 228 18 4.6 30 012 50115 Fiberglass Light grey -40 .. +65 Frontal: 670 (at 150 km/h) Lateral: 345 (at 150 km/h) Rear side: 885 (at 150 km/h) 150 200 4 x 7/16 DIN Female Bottom Internal motor AISG 1.1 / AISG 2.0
79 0 96 0/ 17 1 DX 0 21 X 80 M Hz
15.2 15.4 15.1 15.4 15.6 15.2 15.8 16.0 15.6 17.7 17.9 17.5 18.0 18.1 17.9 18.1 18.3 17.9
Side lobe suppression for rst side 0 lobe above horizon (Typ.) (dB) 17 Horizontal 3dB beam width () Vertical 3dB beam width () VSWR Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) 0 60
Typ. 28 Typ. 20 Typ. 10 300 (at 50 ambient temperature) -153 (2 x 43 dBm carrier)
Max. power per input (W) Intermodulation IM3 (dBc) Impedance () Grounding
2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female
76
DXX-790-960/1710-2180-65/65-16i/18.5i-M/M-R
Model: ADU4518R3
Preliminary Issue
RET Properties RET Type RET Protocols Input voltage range (V) Power consumption (W) Adjustment time (full range) (min) Calibration time (min) RET Connector Pin assignment according AISG 1 DC 2 n/c Internal motor AISG 1.1 / AISG 2.0 DC 1030 < 10 (motor activated) < 0.5 (stand by) < 1.5 (typically, depending on antenna type) < 3 (typically, depending on antenna type) 2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female 3 RS-485B 4 n/c 5 6 7 8 n/c RS-485A DC in/out DC return
Standards: y EN 60950-1 (Safety) y EN 55022 (Emission) y EN 55024 (Immunity) y ETSI EN300386 (1.4.1) y FCC part15
HINT Before the installation, check whether the antenna and base station support the same AISG protocol. If not, contact the technical support personnel of Huawei.
HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com
Hz M 80 21 10 17 XX 0/ D 96 0 79
77
DXX-790-960/1710-2180-65/65-17i/18.5i-M/M
Model: ADU451807v01
Electrical Properties Frequency range (MHz) Polarization Electrical downtilt () Gain (dBi) 0 010, continuously adjustable 5 5 19 69 8.4 10 10 18 0 0 19 5 5 19 66 8 10 10 18 0 0 19 5 5 18 65 7.5 < 1.5 Intra-system: 30 Intra-system: 40 Typ. 28 Typ. 30 Typ. 10 500 (at 50 ambient temperature) Avg. 2.5 Avg. 1 (within 10dB HBW) 50 DC Ground Mechanical Properties Antenna dimensions (H x W x D) (mm) Packing dimensions (H x W x D) (mm) Antenna net weight (kg) Bracket weight (kg) Packing weight (kg) Mechanical downtilt () Mast diameter (mm) Radome material Radome colour Operational temperature () Wind load (N) Max. operational wind speed (km/h) Survival wind speed (km/h) Connector Connector position 2535 x 259 x 135 2952 x 392 x 230 21 5.6 32.5 08 50115 Fiberglass Light grey -55 .. +65 Frontal: 910 (at 150 km/h) Lateral: 470 (at 150 km/h) Rear side: 1200 (at 150 km/h) 150 200 4 x 7/16 DIN Female Bottom
79 0 96 0/ 17 1 DX 0 21 X 80 M Hz
16.6 16.7 16.5 16.9 17.0 16.8 17.0 17.2 16.9 18.1 18.4 18.0 18.3 18.6 18.2 18.3 18.6 18.0
Side lobe suppression for rst side 0 lobe above horizon (Typ.) (dB) 19 Horizontal 3dB beam width () Vertical 3dB beam width () VSWR Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) 0 60
Typ. 29 Typ. 20 Typ. 10 300 (at 50 ambient temperature) -153 (2 x 43 dBm carrier)
Max. power per input (W) Intermodulation IM3 (dBc) Squint () Tracking (dB) Impedance () Grounding
78
DXX-790-960/1710-2180-65/65-17i/18.5i-M/M
Model: ADU451807v01
56
55
70
Unit: mm
7/16 (F)
7/16 (F)
7/16 (F)
7/16 (F)
17102180 MHz
Extraordinary operating conditions, such as heavy icing or storm wind, may result in the breakage of an antenna. These facts must be considered during the site planning process. The installation team must be properly qualied and also be familiar with the relevant national safety regulations.
HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com
Hz M 80 21 10 17 XX 0/ D 96 0 79
79
DXX-790-960/1710-2180-65/65-17i/18.5i-M/M-R
Model: ADU4518R0
Preliminary Issue
Electrical Properties Frequency range (MHz) Polarization Electrical downtilt () Gain (dBi) 0 010 , continuously adjustable 5 5 16 69 8.3 10 10 16 0 0 17 5 5 16 66 7.8 10 10 16 0 0 17 5 5 16 65 7.2 < 1.5 Intra-system: 30 Inter-system: 40 Typ. 27 Typ. 20 Typ. 10 500 (at 50 ambient temperature) 50 DC Ground Mechanical Properties Antenna dimensions (H x W x D) (mm) Packing dimensions (H x W x D) (mm) Weight (kg) Mechanical downtilt () Mast diameter (mm) Radome material Radome colour Operational temperature () Wind load (N) Wind speed (km/h) Connector Connector position RET Type RET Protocols RET Connector 2535 x 259 x 135 3042 x 400 x 228 Antenna: 19.0 Bracket: 5.6 Packing: 36.2 08 50115 Fiberglass Light grey -40 .. +65 Frontal: 910 (at 150 km/h) Lateral: 470 (at 150 km/h) Rear side: 1200 (at 150 km/h) Max. operational: 150 Survival: 200 4 x 7/16 DIN Female Bottom Internal motor AISG 1.1 / AISG 2.0
79 0 96 0/ 17 1 DX 0 21 X 80 M Hz
16.4 16.6 16.3 16.7 16.9 16.5 16.9 17 16.7 17.7 17.9 17.5 18 18.1 17.9 18.1 18.3 17.9
Side lobe suppression for rst side 0 lobe above horizon (Typ.) (dB) 17 Horizontal 3dB beam width () Vertical 3dB beam width () VSWR Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) 0 60
Typ. 28 Typ. 20 Typ. 10 300 (at 50 ambient temperature) -153 (2 x 43 dBm carrier)
Max. power per input (W) Intermodulation IM3 (dBc) Impedance () Grounding
2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female
80
DXX-790-960/1710-2180-65/65-17i/18.5i-M/M-R
Model: ADU4518R0
Preliminary Issue
RET Properties RET Type RET Protocols Input voltage range (V) Power consumption (W) Adjustment time (full range) (min) Calibration time (min) RET Connector Pin assignment according AISG 1 DC 2 n/c Internal motor AISG 1.1 / AISG 2.0 DC 1030 < 10 (motor activated) < 0.5 (stand by) < 1.5 (typically, depending on antenna type) < 3 (typically, depending on antenna type) 2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female 3 RS-485B 4 n/c 5 6 7 8 n/c RS-485A DC in/out DC return
Standards: y EN 60950-1 (Safety) y EN 55022 (Emission) y EN 55024 (Immunity) y ETSI EN300386 (1.4.1) y FCC part15
HINT Before the installation, check whether the antenna and base station support the same AISG protocol. If not, contact the technical support personnel of Huawei.
HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com
Hz M 80 21 10 17 XX 0/ D 96 0 79
81
DXX-790-960/1710-2180-65/65-17i/18i-M/M-C
Model: ADU4518C0
Preliminary Issue
Electrical Properties Frequency range (MHz) Polarization Electrical downtilt () 0 16.6 Side lobe suppression for rst side 0 lobe above horizon (Typ.) (dB) 19 Horizontal 3dB beam width () Vertical 3dB beam width () VSWR Isolation between ports (dB) Front to back ratio, copolar (dB) 0 Cross polar ratio (dB) 60 Max. power per input (W) Total power per combined input (W) Intermodulation IM3 (dBc) Squint () Tracking (dB) Impedance () Grounding Gain (dBi) 790862 17102180 880960 17101880 18501990 19202180 +45, -45 010, continuously adjustable 08, continuously adjustable 5 10 0 5 10 0 5 10 0 4 8 0 4 8 0 4 8 16.7 16.5 16.9 17.0 16.8 17.0 17.2 16.9 18.0 18.3 17.9 18.2 18.5 18.1 18.2 18.5 17.9 5 10 0 5 10 0 5 10 0 4 8 0 4 8 0 4 8 19 18 19 19 18 19 18 17 18 16 18 20 16 18 20 16 18 69 66 65 64 62 60 8.4 8 7.5 5.2 4.9 4.6 < 1.5 Intra-system: 30 Typ. 28 Typ. 29 Typ. 30 Typ. 20 Typ. 10 Typ. 10 250 (at 50 ambient temperature) 200 (at 50 ambient temperature) 450 (at 50 ambient temperature) -153 (2 x 43 dBm carrier) Avg. 2.5 Avg. 1.0 (within 10dB HBW) 50 DC Ground Mechanical Properties Antenna dimensions (H x W x D) (mm) Packing dimensions (H x W x D) (mm) Antenna net weight (kg) Bracket weight (kg) Packing weight (kg) Mechanical downtilt () Mast diameter (mm) Radome material Radome colour Operational temperature () Wind load (N) Max. operational wind speed (km/h) Survival wind speed (km/h) Connector Connector position 2535 x 259 x 135 2952 x 392 x 230 21 5.6 32.5 08 50115 Fiberglass Light grey -55 .. +65 Frontal: 910 (at 150 km/h) Lateral: 470 (at 150 km/h) Rear side: 1200 (at 150 km/h) 150 200 2 x 7/16 DIN Female Bottom 790960 824894
HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com
79 0 96 0/ 17 1 DX 0 21 X 80 M Hz
82
DXX-790-960/1710-2690-65/65-16i/18.5i-M/M
Model: ADU451604
Preliminary Issue
Electrical Properties Frequency range (MHz) Polarization Electrical downtilt () Gain (dBi) 0 010, continuously adjustable 5 5 16 69 10.3 10 10 16 0 0 17 5 5 16 66 9.9 10 10 16 0 0 17 5 5 16 64 9.2 < 1.5 Intra-system: 28 Inter-system: 40 Typ. 28 Typ. 20 Typ. 10 500 (at 50 ambient temperature) 50 DC Ground Mechanical Properties Antenna dimensions (H x W x D) (mm) Packing dimensions (H x W x D) (mm) Antenna net weight (kg) Bracket weight (kg) Packing weight (kg) Mechanical downtilt () Mast diameter (mm) Radome material Radome colour Operational temperature () Wind load (N) Max. operational wind speed (km/h) Survival wind speed (km/h) Connector Connector position 1995 x 298 x 148 2350 x 410 x 250 23 4.6 34 012 50115 Fiberglass Light grey -55 .. +65 Frontal: 540 (at 150 km/h) Lateral: 245 (at 150 km/h) Rear side: 860 (at 150 km/h) 150 200 4 x 7/16 DIN Female Bottom -153 (2 x 43 dBm carrier) Typ. 28 Typ. 20 Typ. 10 250 (at 50 ambient temperature) 10 10 16 0 0 17 4 4 17 64 4.3 790960 790862 824894 880960 17101990 +45, -45 08, continuously adjustable 8 8 16 0 0 17 4 4 17 62 4.1 8 8 16 0 0 17 4 4 17 60 3.5 8 8 16 17102690 19902200 24902690
15.4 15.6 15.3 15.6 15.8 15.4 16.0 16.1 15.8 17.9 17.7 17.3 18.3 18.1 17.5 18.5 18.3 17.8
Side lobe suppression for rst side 0 lobe above horizon (Typ.) (dB) 17 Horizontal 3dB beam width () Vertical 3dB beam width () VSWR Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) 0 60
Max. power per input (W) Intermodulation IM3 (dBc) Impedance () Grounding
HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com
Hz M 90 26 10 17 XX 0/ D 96 0 79
83
DXX-790-960/1710-2690-65/65-17i/18.5i-M/M
Model: ADU451712
Preliminary Issue
Electrical Properties Frequency range (MHz) Polarization Electrical downtilt () Gain (dBi) 0 010, continuously adjustable 5 5 16 69 7.9 10 10 16 0 0 17 5 5 16 66 7.6 10 10 16 0 0 17 5 5 16 64 7.1 < 1.5 Intra-system: 28 Inter-system: 40 Typ. 28 Typ. 20 Typ. 10 500 (at 50 ambient temperature) 50 DC Ground Mechanical Properties Antenna dimensions (H x W x D) (mm) Packing dimensions (H x W x D) (mm) Antenna net weight (kg) Bracket weight (kg) Packing weight (kg) Mechanical downtilt () Mast diameter (mm) Radome material Radome colour Operational temperature () Wind load (N) Max. operational wind speed (km/h) Survival wind speed (km/h) Connector Connector position 2598 x 298 x 148 2950 x 410 x 250 27 5.6 38 08 50115 Fiberglass Light grey -55 .. +65 Frontal: 735 (at 150 km/h) Lateral: 335 (at 150 km/h) Rear side: 1160 (at 150 km/h) 150 200 4 x 7/16 DIN Female Bottom -153 (2 x 43 dBm carrier) Typ. 28 Typ. 20 Typ. 10 250 (at 50 ambient temperature) 10 10 16 0 0 17 4 4 17 64 4.3 790960 790862 824894 880960 17101990 +45, -45 08, continuously adjustable 8 8 16 0 0 17 4 4 17 62 4.1 8 8 16 0 0 17 4 4 17 60 3.5 8 8 16 17102690 19902200 24902690
16.4 16.6 16.3 16.6 16.8 16.4 17.0 17.1 16.8 17.9 17.7 17.3 18.3 18.1 17.5 18.5 18.3 17.8
Side lobe suppression for rst side 0 lobe above horizon (Typ.) (dB) 17 Horizontal 3dB beam width () Vertical 3dB beam width () VSWR Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) 0 60
Max. power per input (W) Intermodulation IM3 (dBc) Impedance () Grounding
HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com
79 0 96 0/ 17 1 DX 0 26 X 90 M Hz
84
DXX-824-960/1710-2170-65/65-15i/18i-M/M
Model: ADU451815
Electrical Properties Frequency range (MHz) Polarization VSWR Gain Side lobe suppression for rst side lobe above horizon Horizontal 3dB beam width () Vertical 3dB beam width () Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) Electrical downtilt () Intermodulation IM3 (dBc) Max. CW input power (W) Impedance () Grounding Mechanical Properties Dimensions (H x W x D) (mm) Packing dimensions (H x W x D) (mm) Net weight (kg) Bracket weight (kg) Packing weight (kg) Mechanical downtilt () Mast diameter (mm) Radome material Operational temperature () Wind load (N) Max. wind velocity (km/h) Connector 1390 x 368 x 99 1666 x 492 x 220 18.2 4.6 27.5 08 50115 Fiberglass -55 .. +65 Frontal: 570 (v=150 km/h) Lateral: 150 (v=150 km/h) Rear side: 570 (v=150 km/h) 200 4 x 7/16 DIN Female 500 50 DC Ground 0 60 014 -150 (2 x 43 dBm carrier) 250 28 18 10 08 () (dBi) () (dBi) 0 0 18 7 7 17 67 15.3 14 14 16 0 0 18 7 7 17 65 14.5 14 14 16 0 0 18 824894 880960 17101880 +45 , -45 1.5 4 4 17 67 8.5 30 25 8 8 16 0 0 18 4 4 17 65 7.5 8 8 16 0 0 18 4 4 17 63 7.0 8 8 16 14.8 14.7 14.6 15.3 15.2 15.0 17.0 17.2 16.9 17.3 17.5 17.2 17.6 17.8 17.5 18501990 19202170
Hz M 70 21 10 17 XX 0/ D 96 4 82
7/16 (F)
7/16 (F)
7/16 (F)
7/16 (F)
85
DXX-824-960/1710-2170-65/65-15i/18i-M/M
Model: ADU451815
824870 MHz
870916 MHz
910960 MHz
17101880 MHz
18501990 MHz
19202170 MHz
HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com
82 4 96 0/ 17 1 DX 0 21 X 70 M Hz
86
DXX-824-960/1710-2170-65/65-15i/17.5i-M/M-C
Model: ADU451707
Electrical Properties Frequency range (MHz) Polarization VSWR Gain Side lobe suppression for rst side lobe above horizon Horizontal 3dB beam width () Vertical 3dB beam width () Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) Electrical downtilt () Intermodulation IM3 (dBc) Max. CW input power (W) Max. power per combined input (W) Impedance () Grounding Mechanical Properties Dimensions (H x W x D) (mm) Packing dimensions (H x W x D) (mm) Net weight (kg) Bracket weight (kg) Packing weight (kg) Mechanical downtilt () Mast diameter (mm) Radome material Operational temperature () Wind load (N) Max. wind velocity (km/h) Connector 1390 x 368 x 99 1666 x 492 x 220 18.2 4.6 27.5 08 50115 Fiberglass -55 .. +65 Frontal: 570 (v=150 km/h) Lateral: 150 (v=150 km/h) Rear side: 570 (v=150 km/h) 200 2 x 7/16 DIN Female 300 500 50 DC Ground 0 60 014 -150 (2 x 43 dBm carrier) 200 28 18 10 08 () (dBi) () (dBi) 0 0 18 7 7 17 67 15.3 14 14 16 0 0 18 7 7 17 65 14.5 14 14 16 0 0 18 824894 880960 17101880 +45 , -45 1.5 4 4 17 67 8.5 30 25 8 8 16 0 0 18 4 4 17 65 7.5 8 8 16 0 0 18 4 4 17 63 7.0 8 8 16 14.7 14.6 14.5 15.2 15.1 15.0 16.8 17.0 16.7 17.1 17.3 17.0 17.3 17.5 17.2 18501990 19202170
824960 X +45 C
Hz M 70 21 10 17 XX 0/ D 96 4 82
7/16 (F)
7/16 (F)
87
DXX-824-960/1710-2170-65/65-15i/17.5i-M/M-C
Model: ADU451707
824870 MHz
870916 MHz
910960 MHz
17101880 MHz
18501990 MHz
19202170 MHz
HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com
82 4 96 0/ 17 1 DX 0 21 X 70 M Hz
88
DXX-824-960/1710-2170-65/65-16i/17.5i-M/M-C
Model: ADU451811
Electrical Properties Frequency range (MHz) Polarization VSWR Gain Side lobe suppression for rst side lobe above horizon Horizontal 3dB beam width () Vertical 3dB beam width () Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) Electrical downtilt () Intermodulation IM3 (dBc) Max. CW input power (W) Max. power per combined input (W) Impedance () Grounding Mechanical Properties Dimensions (H x W x D) (mm) Packing dimensions (H x W x D) (mm) Net weight (kg) Bracket weight (kg) Packing weight (kg) Mechanical downtilt () Mast diameter (mm) Radome material Operational temperature () Wind load (N) Max. wind velocity (km/h) Connector 1925 x 368 x 99 2232 x 492 x 220 22.5 7.8 36.5 08 50115 Fiberglass -55 .. +65 Frontal: 790 (v=150 km/h) Lateral: 205 (v=150 km/h) Rear side: 790 (v=150 km/h) 200 2 x 7/16 DIN Female 300 500 50 DC Ground 0 60 28 18 10 08 -150 (2 x 43 dBm carrier) 200 () (dBi) () (dBi) 0 0 18 4 4 17 67 11.5 8 8 16 0 0 18 4 4 17 65 10.5 8 8 16 0 0 18 824894 880960 17101880 +45 , -45 1.5 4 4 17 67 8.5 30 25 8 8 16 0 0 18 4 4 17 65 7.5 8 8 16 0 0 18 4 4 17 63 7.0 8 8 16 15.7 15.8 15.6 15.9 16.1 15.8 16.8 17.0 16.7 17.1 17.3 17.0 17.3 17.5 17.2 18501990 19202170
824960 X +45 C
Hz M 70 21 10 17 XX 0/ D 96 4 82
7/16 (F)
7/16 (F)
89
DXX-824-960/1710-2170-65/65-16i/17.5i-M/M-C
Model: ADU451811
824870 MHz
870916 MHz
910960 MHz
17101880 MHz
18501990 MHz
19202170 MHz
HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com
82 4 96 0/ 17 1 DX 0 21 X 70 M Hz
90
DXX-824-960/1710-2170-65/65-16i/18i-M/M
Model: ADU451806
Electrical Properties Frequency range (MHz) Polarization VSWR Gain Side lobe suppression for rst side lobe above horizon Horizontal 3dB beam width () Vertical 3dB beam width () Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) Electrical downtilt () Intermodulation IM3 (dBc) Max. CW input power (W) Impedance () Grounding Mechanical Properties Dimensions (H x W x D) (mm) Packing dimensions (H x W x D) (mm) Net weight (kg) Bracket weight (kg) Packing weight (kg) Mechanical downtilt () Mast diameter (mm) Radome material Operational temperature () Wind load (N) Max. wind velocity (km/h) Connector 1925 x 368 x 99 2232 x 492 x 220 22.5 7.8 36.5 08 50115 Fiberglass -55 .. +65 Frontal: 790 (v=150 km/h) Lateral: 205 (v=150 km/h) Rear side: 790 (v=150 km/h) 200 2 x 7/16 DIN Female 500 50 DC Ground 0 60 28 18 10 08 -150 (2 x 43 dBm carrier) 250 () (dBi) () (dBi) 0 0 18 4 4 17 67 11.5 8 8 16 0 0 18 4 4 17 65 10.5 8 8 16 0 0 18 824894 880960 17101880 +45 , -45 1.5 4 4 17 67 8.5 30 25 8 8 16 0 0 18 4 4 17 65 7.5 8 8 16 0 0 18 4 4 17 63 7.0 8 8 16 15.8 16.0 15.7 16.0 16.2 15.9 17.0 17.2 16.9 17.3 17.5 17.2 17.6 17.8 17.5 18501990 19202170
Hz M 70 21 10 17 XX 0/ D 96 4 82
7/16 (F)
7/16 (F)
7/16 (F)
7/16 (F)
91
DXX-824-960/1710-2170-65/65-16i/18i-M/M
Model: ADU451806
824870 MHz
870916 MHz
910960 MHz
17101880 MHz
18501990 MHz
19202170 MHz
HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com
82 4 96 0/ 17 1 DX 0 21 X 70 M Hz
92
DXX-824-960/1710-2170-65/65-17i/17.5i-M/M-C
Model: ADU451700
Electrical Properties Frequency range (MHz) Polarization VSWR Gain Side lobe suppression for rst side lobe above horizon Horizontal 3dB beam width () Vertical 3dB beam width () Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) Electrical downtilt () Intermodulation IM3 (dBc) Max. CW input power (W) Max. power per combined input (W) Impedance () Grounding Mechanical Properties Dimensions (H x W x D) (mm) Packing dimensions (H x W x D) (mm) Net weight (kg) Bracket weight (kg) Packing weight (kg) Mechanical downtilt () Mast diameter (mm) Radome material Operational temperature () Wind load (N) Max. wind velocity (km/h) Connector 2449 x 368 x 99 2756 x 492 x 220 26.7 7.8 40.2 015 50115 Fiberglass -55 .. +65 Frontal: 1000 (v=150 km/h) Lateral: 260 (v=150 km/h) Rear side: 1000 (v=150 km/h) 200 2 x 7/16 DIN Female 300 500 50 DC Ground 0 60 28 18 10 08 -150 (2 x 43 dBm carrier) 200 () (dBi) () (dBi) 0 0 18 4 4 17 67 8.3 8 8 16 0 0 18 4 4 17 65 7.2 8 8 16 0 0 18 824894 880960 17101880 +45 , -45 1.5 4 4 17 67 8.0 30 25 8 8 16 0 0 18 4 4 17 65 7.5 8 8 16 0 0 18 4 4 17 63 7.0 8 8 16 16.7 16.8 16.5 17.1 17.2 16.9 16.7 16.9 16.6 17.0 17.2 16.9 17.3 17.5 17.2 18501990 19202170
824960 X +45 C
Hz M 70 21 10 17 XX 0/ D 96 4 82
7/16 (F)
7/16 (F)
93
DXX-824-960/1710-2170-65/65-17i/17.5i-M/M-C
Model: ADU451700
824870 MHz
870916 MHz
910960 MHz
17101880 MHz
18501990 MHz
19202170 MHz
HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com
82 4 96 0/ 17 1 DX 0 21 X 70 M Hz
94
DXX-824-960/1710-2170-65/65-17.5i/18i-M/M
Model: ADU451801
Electrical Properties Frequency range (MHz) Polarization VSWR Gain (dBi) Side lobe suppression for rst side lobe above horizon (dB) Horizontal 3dB beam width () Vertical 3dB beam width () Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) Electrical downtilt () Intermodulation IM3 (dBc) Max. CW input power (W) Impedance () Grounding Mechanical Properties Dimensions (H x W x D) (mm) Packing dimensions (H x W x D) (mm) Net weight (kg) Bracket weight (kg) Packing weight (kg) Mechanical downtilt () Mast diameter (mm) Radome material Operational temperature () Wind load (N) Max. wind velocity (km/h) Connector 2449 x 368 x 99 2756 x 492 x 220 30 7.8 41.9 015 50115 Fiberglass -55 .. +65 Frontal: 1000 (v=150 km/h) Lateral: 260 (v=150 km/h) Rear side: 1000 (v=150 km/h) 200 4 x 7/16 DIN Female 500 50 DC Ground 0 60 010 -150 (2 x 43 dBm carrier) 250 27 Typ. 20 10 08 17.0 Typ. 18 65 8.5 17.5 Typ. 18 63 7.5 824894 880960 17101880 +45 , -45 1.5 17.0 Typ. 18 67 8.2 30 25 17.5 Typ. 18 65 7.5 18.0 Typ. 18 63 7.0 18501990 19202170
Hz M 70 21 10 17 XX 0/ D 96 4 82
7/16 (F)
7/16 (F)
7/16 (F)
7/16 (F)
95
DXX-824-960/1710-2170-65/65-17.5i/18i-M/M
Model: ADU451801
824870 MHz
870916 MHz
910960 MHz
17101880 MHz
18501990 MHz
19202170 MHz
HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com
82 4 96 0/ 17 1 DX 0 21 X 70 M Hz
96
DXX-1710-2200/1710-2200-65/65-18i/18i-M/M
Model: ADU451819
Electrical Properties Frequency range (MHz) Polarization Electrical downtilt () Gain (dBi) Side lobe suppression for rst side lobe above horizon (Typ.) (dB) Horizontal 3dB beam width () Vertical 3dB beam width () VSWR Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) Max. power per input (W) Intermodulation IM3 (dBc) Squint () Tracking (dB) Impedance () Grounding Mechanical Properties Antenna dimensions (H x W x D) (mm) Packing dimensions (H x W x D) (mm) Antenna net weight (kg) Bracket weight (kg) Packing weight (kg) Mechanical downtilt () Mast diameter (mm) Radome material Radome colour Operational temperature () Wind load (N) Max. operational wind speed (km/h) Survival wind speed (km/h) Connector
Hz M 00 22 0 71 /1 X 00 DX 22 10 17
2 x (17102200) 17101880 18501990 +45, -45 010, continuously adjustable 0 17.0 0 18 5 17.4 5 17 67 7.5 10 17.1 10 17 0 17.3 0 19 5 17.7 5 18 64 7.0 < 1.5 30 Typ. 28 Typ. 22 Typ. 10 300 (at 50 ambient temperature) -153 (2 x 43 dBm carrier) Avg. 2 Avg. 1.5 (within 10dB HBW) 50 DC Ground 10 17.4 10 18 0 17.6 0 19 5 18.0 5 18 61 6.6 10 17.4 10 17 0 17.5 0 19 5 18.0 5 18 60 6.2 10 17.4 10 17 19202170 21702200
0 60
1311 x 323 x 89 1737 x 422 x 200 12.8 4.6 21.5 016 50115 Fiberglass Light grey -55 .. +65 Frontal: 565 (at 150 km/h) Lateral: 105 (at 150 km/h) Rear side: 640 (at 150 km/h) 150 200 4 x 7/16 DIN Female Bottom
Connector position
97
DXX-1710-2200/1710-2200-65/65-18i/18i-M/M
Model: ADU451819
43
36
59
31
L - Left Column
R - Right Column
Unit: mm
17102200 X +45
17102200 X +45
-45
-45
7/16 (F)
7/16 (F)
7/16 (F)
7/16 (F)
17102200 MHz HINT Extraordinary operating conditions, such as heavy icing or storm wind, may result in the breakage of an antenna. These facts must be considered during the site planning process. The installation team must be properly qualied and also be familiar with the relevant national safety regulations.
HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com
17 10 22 00 /1 7 DX 10 X 22 00 M Hz
98
DXX-1710-2200/1710-2200-65/65-18i/18i-M/M-R
Model: ADU4518R1
Preliminary Issue
Electrical Properties Frequency range (MHz) Polarization Electrical downtilt () Gain (dBi) Side lobe suppression for rst side lobe above horizon (Typ.) (dB) Horizontal 3dB beam width () Vertical 3dB beam width () VSWR Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) Max. power per input (W) Intermodulation IM3 (dBc) Squint () Tracking (dB) Impedance () Grounding Mechanical Properties Antenna dimensions (H x W x D) (mm) Packing dimensions (H x W x D) (mm) Antenna net weight (kg) Bracket weight (kg) Packing weight (kg) Mechanical downtilt () Mast diameter (mm) Radome material Radome colour Operational temperature () Wind load (N) Max. operational wind speed (km/h) Survival wind speed (km/h) Connector Connector position RET Type RET Protocols RET Connector
Hz M 00 22 0 71 /1 X 00 DX 22 10 17
2 x (17102200) 17101880 18501990 +45, -45 010 , continuously adjustable 0 17.5 0 17 5 17.4 5 16 68 7.5 10 17.0 10 16 0 17.6 0 17 5 17.5 5 16 65 7.0 < 1.5 30 Typ. 28 Typ. 18 Typ. 10 300 (at 50 ambient temperature) -153 (2 x 43 dBm carrier) Typ. 5 Typ. 3 (within 10dB HBW) 50 DC Ground 10 17.2 10 15 0 18.0 0 17 5 17.9 5 16 61 6.5 10 17.4 10 15 0 18.0 0 17 5 17.9 5 16 60 6.2 10 17.2 10 15 19202170 21702200
0 60
1315 x 323 x 89 1807 x 442 x 182 14 4.6 20.8 016 50115 Fiberglass Light grey -40 .. +65 Frontal: 470 (at 150 km/h) Lateral: 120 (at 150 km/h) Rear side: 470 (at 150 km/h) 150 200 4 x 7/16 DIN Female Bottom Internal motor AISG 1.1 / AISG 2.0 2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female
99
DXX-1710-2200/1710-2200-65/65-18i/18i-M/M-R
Model: ADU4518R1
Preliminary Issue
RET Properties RET Type RET Protocols Input voltage range (V) Power consumption (W) Adjustment time (full range) (min) Calibration time (min) RET Connector Pin assignment according AISG 1 DC 2 n/c Internal motor AISG 1.1 / AISG 2.0 DC 1030 < 10 (motor activated) < 0.5 (stand by) < 1.5 (typically, depending on antenna type) < 3 (typically, depending on antenna type) 2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female 3 RS-485B 4 n/c 5 6 7 8 n/c RS-485A DC in/out DC return
Standards: y EN 60950-1 (Safety) y EN 55022 (Emission) y EN 55024 (Immunity) y ETSI EN300386 (1.4.1) y FCC part15
HINT Before the installation, check whether the antenna and base station support the same AISG protocol. If not, contact the technical support personnel of Huawei.
HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com
17 10 22 00 /1 7 DX 10 X 22 00 M Hz
10 0
DXX-1710-2200/1710-2200-65/65-19.5i/19.5i-M/M
Model: ADU451902
Electrical Properties Frequency range (MHz) Polarization Electrical downtilt () Gain (dBi) Side lobe suppression for rst side lobe above horizon (Typ.) (dB) Horizontal 3dB beam width () Vertical 3dB beam width () VSWR Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) Max. power per input (W) Intermodulation IM3 (dBc) Impedance () Grounding Mechanical Properties Antenna dimensions (H x W x D) (mm) Packing dimensions (H x W x D) (mm) Antenna net weight (kg) Bracket weight (kg) Packing weight (kg) Mechanical downtilt () Mast diameter (mm) Radome material Radome colour Operational temperature () Wind load (N) Max. operational wind speed (km/h) Survival wind speed (km/h) Connector
Hz M 00 22 0 71 /1 X 00 DX 22 10 17
2 x (17102200) 17101880 18501990 +45, -45 06, continuously adjustable 0 18.5 0 20 3 18.7 3 17 67 5.0 6 18.6 6 16 0 18.9 0 20 3 19.1 3 17 65 4.7 < 1.5 30 Typ. 28 Typ. 25 Typ. 10 300 (at 50 ambient temperature) -153 (2 x 43 dBm carrier) 50 DC Ground 6 18.8 6 17 0 19.1 0 20 3 19.4 3 18 62 4.5 6 18.9 6 17 0 19.1 0 20 3 19.3 3 18 60 4.1 6 18.8 6 17 19202170 21702200
0 60
1954 x 323 x 89 2365 x 417 x 200 17.3 4.6 26.3 012 50115 Fiberglass Light grey -55 .. +65 Frontal: 890 (at 150 km/h) Lateral: 170 (at 150 km/h) Rear side: 1000 (at 150 km/h) 150 200 4 x 7/16 DIN Female Bottom
Connector position
1 10
DXX-1710-2200/1710-2200-65/65-19.5i/19.5i-M/M
Model: ADU451902
43
36
59
31
L - Left Column
R - Right Column
Unit: mm
17102200 X +45
17102200 X +45
-45
-45
7/16 (F)
7/16 (F)
7/16 (F)
7/16 (F)
17102200 MHz HINT Extraordinary operating conditions, such as heavy icing or storm wind, may result in the breakage of an antenna. These facts must be considered during the site planning process. The installation team must be properly qualied and also be familiar with the relevant national safety regulations.
HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com
17 10 22 00 /1 7 DX 10 X 22 00 M Hz
10 2
DXX-1710-2690/1710-2690-65/65-18i/18i-M/M
Model: ADU451816
Electrical Properties Frequency range (MHz) Polarization Electrical downtilt () Gain (dBi) Side lobe suppression for rst side lobe above horizon (Typ.) (dB) Horizontal 3dB beam width () Vertical 3dB beam width () VSWR Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) Max. power per input (W) Intermodulation IM3 (dBc) Squint () Tracking (dB) Impedance () Grounding Mechanical Properties Antenna dimensions (H x W x D) (mm) Packing dimensions (H x W x D) (mm) Antenna net weight (kg) Bracket weight (kg) Packing weight (kg) Mechanical downtilt () Mast diameter (mm) Radome material Radome colour Operational temperature () Wind load (N) Max. operational wind speed (km/h) Survival wind speed (km/h) Connector
Hz M 90 26 0 71 /1 X 90 DX 26 10 17
2 x (17102690) 17101990 19202200 +45, -45 010, continuously adjustable 0 17.3 0 18 5 17.4 5 17 69 6.5 10 17.2 10 16 0 17.6 0 18 5 17.8 5 17 65 6.0 < 1.5 30 Typ. 27 Typ. 20 Typ. 10 300 (at 50 ambient temperature) -153 (2 x 43 dBm carrier) Typ. 5 Typ. 3 (within 10dB HBW) 50 DC Ground 10 17.5 10 16 0 17.8 0 18 5 18.0 5 17 65 5.2 10 17.6 10 16 0 17.8 0 18 5 18.0 5 17 62 4.8 10 17.3 10 16 22002490 24902690
0 60
1410 x 299 x 89 1855 x 435 x 190 14 4.6 23 016 50115 Fiberglass Light grey -55 .. +65 Frontal: 530 (at 150 km/h) Lateral: 105 (at 150 km/h) Rear side: 620 (at 150 km/h) 150 200 4 x 7/16 DIN Female (Long neck) Bottom
Connector position
3 10
DXX-1710-2690/1710-2690-65/65-18i/18i-M/M
Model: ADU451816
56
43
54
17102690 X -45
17102690 X +45
+45
-45
7/16 (F)
7/16 (F)
7/16 (F)
7/16 (F)
22002690 MHz
Extraordinary operating conditions, such as heavy icing or storm wind, may result in the breakage of an antenna. These facts must be considered during the site planning process. The installation team must be properly qualied and also be familiar with the relevant national safety regulations.
HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com
17 10 26 90 /1 7 DX 10 X 26 90 M Hz
10 4
DXX-1710-2690/1710-2690-65/65-18i/18i-M/M-R
Model: ADU4518R6
Preliminary Issue
Electrical Properties Frequency range (MHz) Polarization Electrical downtilt () Gain (dBi) Side lobe suppression for rst side lobe above horizon (Typ.) (dB) Horizontal 3dB beam width () Vertical 3dB beam width () VSWR Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) Max. power per input (W) Intermodulation IM3 (dBc) Impedance () Grounding Mechanical Properties Antenna dimensions (H x W x D) (mm) Packing dimensions (H x W x D) (mm) Antenna net weight (kg) Bracket weight (kg) Packing weight (kg) Mechanical downtilt () Mast diameter (mm) Radome material Radome colour Operational temperature () Wind load (N) Max. operational wind speed (km/h) Survival wind speed (km/h) Connector Connector position RET Type RET Protocols RET Connector
Hz M 90 26 0 71 /1 X 90 DX 26 10 17
2 x (17102690) 17101990 19202200 +45, -45 012 , continuously adjustable 0 17.3 0 18 6 17.4 6 17 66 6.5 12 17.2 12 16 0 17.6 0 18 6 17.8 6 17 63 6.2 < 1.5 30 Typ. 28 Typ. 20 Typ. 10 250 (at 50 ambient temperature) -153 (2 x 43 dBm carrier) 50 DC Ground 12 17.5 12 16 0 17.7 0 18 6 18.0 6 17 60 5.2 12 17.5 12 16 0 17.8 0 17 6 18.0 6 17 60 4.7 12 17.3 12 16 22002490 24902690
0 60
1425 x 323 x 89 1770 x 422 x 200 15.6 4.6 24.5 016 50115 Fiberglass Light grey -40 .. +65 Frontal: 615 (at 150 km/h) Lateral: 115 (at 150 km/h) Rear side: 695 (at 150 km/h) 150 200 4 x 7/16 DIN Female Bottom Internal motor AISG 1.1 / AISG 2.0 2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female
5 10
DXX-1710-2690/1710-2690-65/65-18i/18i-M/M-R
Model: ADU4518R6
Preliminary Issue
RET Properties RET Type RET Protocols Input voltage range (V) Power consumption (W) Adjustment time (full range) (min) Calibration time (min) RET Connector Pin assignment according AISG 1 DC 2 n/c Internal motor AISG 1.1 / AISG 2.0 DC 1030 < 10 (motor activated) < 0.5 (stand by) < 1.5 (typically, depending on antenna type) < 3 (typically, depending on antenna type) 2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female 3 RS-485B 4 n/c 5 6 7 8 n/c RS-485A DC in/out DC return
Standards: y EN 60950-1 (Safety) y EN 55022 (Emission) y EN 55024 (Immunity) y ETSI EN300386 (1.4.1) y FCC part15
HINT Before the installation, check whether the antenna and base station support the same AISG protocol. If not, contact the technical support personnel of Huawei.
HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com
17 10 26 90 /1 7 DX 10 X 26 90 M Hz
10 6
DXX-1710-2690/1710-2690-65/65-19.5i/19.5i-M/M
Model: ADU451901
Electrical Properties Frequency range (MHz) Polarization Electrical downtilt () Gain (dBi) Side lobe suppression for rst side lobe above horizon (Typ.) (dB) Horizontal 3dB beam width () Vertical 3dB beam width () VSWR Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) Max. power per input (W) Intermodulation IM3 (dBc) Impedance () Grounding Mechanical Properties Antenna dimensions (H x W x D) (mm) Packing dimensions (H x W x D) (mm) Antenna net weight (kg) Bracket weight (kg) Packing weight (kg) Mechanical downtilt () Mast diameter (mm) Radome material Radome colour Operational temperature () Wind load (N) Max. operational wind speed (km/h) Survival wind speed (km/h) Connector
Hz M 90 26 0 71 /1 X 90 DX 26 10 17
2 x (17102690) 17101990 19202200 +45, -45 06, continuously adjustable 0 18.1 0 20 3 18.3 3 20 69 4.9 6 18.2 6 16 0 18.4 0 20 3 18.6 3 20 67 4.5 < 1.5 30 Typ. 27 Typ. 20 Typ. 10 250 (at 50 ambient temperature) -153 (2 x 43 dBm carrier) 50 DC Ground 6 18.5 6 17 0 18.9 0 18 3 19.2 3 18 65 4.1 6 19.1 6 18 0 19.2 0 17 3 19.4 3 17 60 3.7 6 17.3 6 18 22002490 24902690
0 60
1930 x 299 x 89 2390 x 440 x 190 17.5 4.6 28.3 012 50115 Fiberglass Light grey -55 .. +65 Frontal: 765 (at 150 km/h) Lateral: 150 (at 150 km/h) Rear side: 890 (at 150 km/h) 150 200 4 x 7/16 DIN Female (Long neck) Bottom
Connector position
7 10
DXX-1710-2690/1710-2690-65/65-19.5i/19.5i-M/M
Model: ADU451901
56
43
54
17102690 X -45
17102690 X +45
+45
-45
7/16 (F)
7/16 (F)
7/16 (F)
7/16 (F)
22002690 MHz
Extraordinary operating conditions, such as heavy icing or storm wind, may result in the breakage of an antenna. These facts must be considered during the site planning process. The installation team must be properly qualied and also be familiar with the relevant national safety regulations.
HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com
17 10 26 90 /1 7 DX 10 X 26 90 M Hz
10 8
DXXX-790-862/880-960/1710-2690-65/65/65-15.5i/16i/18.5i-M/M/M-R
Model: ATR4518R2
Preliminary Issue
Electrical Properties Frequency range (MHz) Polarization Electrical downtilt () Gain (dBi) 010, continuously adjustable 0 5 5 16 68 10.2 10 10 16 0 0 17 5 5 16 64 9.7 10 10 16 0 0 17 4 5 17 64 5.2 < 1.5 Intra-system: 28 Inter-system: 30 Typ. 28 Typ. 18 Typ. 10 400 (at 50 ambient temperature) Typ. 28 Typ. 17 Typ. 10 250 (at 50 ambient temperature) 50 DC Ground Mechanical Properties Antenna dimensions (H x W x D) (mm) Packing dimensions (H x W x D) (mm) Antenna net weight (kg) Bracket weight (kg) Packing weight (kg) Mechanical downtilt () Mast diameter (mm) Radome material Radome colour Operational temperature () Wind load (N) Max. operational wind speed (km/h) Survival wind speed (km/h) Connector Connector position RET Type RET Protocols RET Connector
0/ 96 z 0 H 88 M 2/ 90 86 26 X X 0 0 X 79 171 D
790862
880960
17102690 17101990 +45, -45 08, continuously adjustable 8 10 16 0 0 17 4 4 17 62 4.8 8 8 16 0 0 17 4 4 17 60 4.0 8 8 16 19202170 24902690
15.1 15.3 15.0 15.6 15.7 15.4 17.9 17.7 17.3 18.3 18.1 17.5 18.5 18.3 17.8
Side lobe suppression for rst side 0 lobe above horizon (Typ.) (dB) 17 Horizontal 3dB beam width () Vertical 3dB beam width () VSWR Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) 0 60
Max. power per input (W) Intermodulation IM3 (dBc) Impedance () Grounding
2065 x 298 x 148 2350 x 450 x 248 32 4.6 42 08 50115 Fiberglass Light grey -40 .. +65 Frontal: 565 (at 150 km/h) Lateral: 255 (at 150 km/h) Rear side: 890 (at 150 km/h) 150 200 6 x 7/16 DIN Female Bottom Internal motor AISG 1.1 / AISG 2.0 2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female
9 10
DXXX-790-862/880-960/1710-2690-65/65/65-15.5i/16i/18.5i-M/M/M-R
Model: ATR4518R2
Preliminary Issue
RET Properties RET Type RET Protocols Input voltage range (V) Power consumption (W) Adjustment time (full range) (min) Calibration time (min) RET Connector Pin assignment according AISG 1 DC 2 n/c Internal motor AISG 1.1 / AISG 2.0 DC 1030 < 10 (motor activated) < 0.5 (stand by) < 1.5 (typically, depending on antenna type) < 3 (typically, depending on antenna type) 2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female 3 RS-485B 4 n/c 5 6 7 8 n/c RS-485A DC in/out DC return
Standards: y EN 60950-1 (Safety) y EN 55022 (Emission) y EN 55024 (Immunity) y ETSI EN300386 (1.4.1) y FCC part15
HINT Before the installation, check whether the antenna and base station support the same AISG protocol. If not, contact the technical support personnel of Huawei.
HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com
79 0 17 8 10 62 /88 DX 269 0 XX 0M 96 Hz 0/
www.huawei.com
11 0
DXXX-790-960/1710-2180/1710-2180-65/65/65-14i/14i/14i-M/M/M
Model: ATR451500
Electrical Properties Frequency range (MHz) Polarization Electrical downtilt () 0 Gain (dBi) Bottom Top Side lobe suppression for rst side 0 lobe above horizon (Typ.) (dB) 18 Horizontal 3dB beam width () Vertical 3dB beam width () VSWR Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) 0 60 7 17 69 15.5 14 15 0 19 7 18 68 14.8 14 16 0 19 7 18 67 13.8 < 1.5 Intra-system: 30 Inter-system (790 - 960 / 1710 - 2180 MHz): 40 Inter-system (1710 - 2180 / 1710 - 2180 MHz): 30 Typ. 28 Typ. 26 Typ. 10 500 (at 50 ambient temperature) Avg. 2.5 Avg. 2.5 (within 10dB HBW) 50 DC Ground -153 (2 x 43 dBm carrier) Typ. 28 Typ. 20 Typ. 10 300 (at 50 ambient temperature) 14 15 014, continuously adjustable 7 14 0 7 14 0 7 14 0 14.7 14.8 14.5 15.0 14.8 14.7 15.0 14.8 14.6 14.6 14.5 14.3 15.0 14.9 14.5 15.3 15.2 14.7 14.5 14.5 14.0 14.9 14.7 14.1 15.1 15.0 14.3 0 17 7 17 63 13.6 14 15 0 18 7 18 61 12.8 14 15 0 17 7 17 60 12.1 14 15 790960 790862 824894 880960 17101880 +45, -45 014, continuously adjustable 7 14 0 7 14 0 7 14 2 x (17102180) 18501990 19202180
Max. power per input (W) Intermodulation IM3 (dBc) Squint () Tracking (dB) Impedance () Grounding
Mechanical Properties Antenna dimensions (H x W x D) (mm) Packing dimensions (H x W x D) (mm) Antenna net weight (kg) Bracket weight (kg) Packing weight (kg) Mechanical downtilt () Mast diameter (mm) Radome material Radome colour Operational temperature () Wind load (N) Max. operational wind speed (km/h) Survival wind speed (km/h) Connector Connector position
/ 80 21 z 10 MH 17 0 0/ 18 96 2 XX 0 10 DX 79 17
1454 x 259 x 135 1872 x 392 x 230 15.1 4.6 24.5 016 50115 Fiberglass Light grey -55 .. +65 Frontal: 480 (at 150 km/h) Lateral: 250 (at 150 km/h) Rear side: 635 (at 150 km/h) 150 200 6 x 7/16 DIN Female Bottom
1 11
DXXX-790-960/1710-2180/1710-2180-65/65/65-14i/14i/14i-M/M/M
Model: ATR451500
61
44
17 56
Unit: mm
7/16 (F)
7/16 (F)
7/16 (F)
7/16 (F)
7/16 (F)
7/16 (F)
790960 MHz
HINT Extraordinary operating conditions, such as heavy icing or storm wind, may result in the breakage of an antenna. These facts must be considered during the site planning process. The installation team must be properly qualied and also be familiar with the relevant national safety regulations.
HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com
79 0 17 96 10 0/1 71 DX 218 0 XX 0M 21 Hz 80 /
11 2
DXXX-790-960/1710-2180/1710-2180-65/65/65-16i/16i/16i-M/M/M
Model: ATR451602v01
Electrical Properties Frequency range (MHz) Polarization Electrical downtilt () 0 Gain (dBi) Bottom Top Side lobe suppression for rst side 0 lobe above horizon (Typ.) (dB) 18 Horizontal 3dB beam width () Vertical 3dB beam width () VSWR Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) 0 60 6 17 69 10.7 12 15 0 19 6 18 66 10.1 12 16 0 19 6 18 65 9.4 12 15 012, continuously adjustable 6 12 0 6 12 0 6 12 0 16.2 16.0 15.5 16.3 16.3 15.6 16.5 16.2 15.6 15.9 16.0 15.6 16.2 16.4 15.8 16.3 16.5 16.0 16.0 16.2 15.6 16.3 16.4 15.7 16.3 16.5 15.7 0 17 6 17 64 Bottom: 9.6 Top: 8.5 < 1.5 Intra-system: 30 Inter-system (790 - 960 / 1710 - 2180 MHz): 40 Inter-system (1710 - 2180 / 1710 - 2180 MHz): 35 Typ. 28 Typ. 26 Typ. 10 500 (at 50 ambient temperature) Avg. 2.5 Avg. 2.5 (within 10dB HBW) 50 DC Ground Mechanical Properties Antenna dimensions (H x W x D) (mm) Packing dimensions (H x W x D) (mm) Antenna net weight (kg) Bracket weight (kg) Packing weight (kg) Mechanical downtilt () Mast diameter (mm) Radome material Radome colour Operational temperature () Wind load (N) Max. operational wind speed (km/h) Survival wind speed (km/h) Connector Connector position
/ 80 21 z 10 MH 17 0 0/ 18 96 2 XX 0 10 DX 79 17
12 15
0 18
6 18 62
12 15
0 17
6 17 60
12 15
Typ. 29 Typ. 20 Typ. 10 300 (at 50 ambient temperature) -153 (2 x 43 dBm carrier)
Max. power per input (W) Intermodulation IM3 (dBc) Squint () Tracking (dB) Impedance () Grounding
2098 x 259 x 135 2514 x 392 x 230 19.4 4.6 29.7 012 50115 Fiberglass Light grey -55 .. +65 Frontal: 730 (at 150 km/h) Lateral: 380 (at 150 km/h) Rear side: 965 (at 150 km/h) 150 200 6 x 7/16 DIN Female Bottom
3 11
DXXX-790-960/1710-2180/1710-2180-65/65/65-16i/16i/16i-M/M/M
Model: ATR451602v01
61
44
17 56
Unit: mm
7/16 (F)
7/16 (F)
7/16 (F)
7/16 (F)
7/16 (F)
7/16 (F)
790960 MHz
HINT Extraordinary operating conditions, such as heavy icing or storm wind, may result in the breakage of an antenna. These facts must be considered during the site planning process. The installation team must be properly qualied and also be familiar with the relevant national safety regulations.
HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com
79 0 17 96 10 0/1 71 DX 218 0 XX 0M 21 Hz 80 /
11 4
DXXX-790-960/1710-2180/1710-2180-65/65/65-16i/16i/16i-M/M/M-R
Model: ATR4516R0
Preliminary Issue
Electrical Properties Frequency range (MHz) Polarization Electrical downtilt () 0 Gain (dBi) Bottom Top Side lobe suppression for rst side 0 lobe above horizon (Typ.) (dB) 17 Horizontal 3dB beam width () Vertical 3dB beam width () VSWR Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) 0 60 Typ. 27 Typ. 20 Typ. 10 500 (at 50 ambient temperature) 50 DC Ground Mechanical Properties Antenna dimensions (H x W x D) (mm) Packing dimensions (H x W x D) (mm) Antenna net weight (kg) Bracket weight (kg) Packing weight (kg) Mechanical downtilt () Mast diameter (mm) Radome material Radome colour Operational temperature () Wind load (N) Max. operational wind speed (km/h) Survival wind speed (km/h) Connector Connector position RET Type RET Protocols RET Connector
/ 80 21 z 10 MH 17 0 0/ 18 96 2 XX 0 10 DX 79 17
790960 790862 824894 880960 17101880 +45 , -45 012 , continuously adjustable 6 12 0 6 12 0 6 12 0 15.2 15.4 15.1 15.4 15.6 15.2 15.8 16.0 15.6
15.6 15.6 15.2 15.9 16.0 15.4 16.1 16.1 15.6 15.5 15.5 15.1 15.9 16.0 15.1 16.0 16.0 15.4 6 16 69 11.3 12 16 0 17 6 16 66 10.7 12 16 0 17 6 16 65 10 12 16 0 17 6 16 66 Bottom: 9.5 Top: 8.6 < 1.5 Intra-system: 30 Inter-system: 40 Typ. 27 Typ. 20 Typ. 10 300 (at 50 ambient temperature) -153 (2 x 43 dBm carrier) 12 15 0 17 6 16 63 Bottom: 9.0 Top: 8.0 12 15 0 17 6 16 60 Bottom: 8.5 Top: 7.5 12 15
Max. power per input (W) Intermodulation IM3 (dBc) Impedance () Grounding
2100 x 259 x 135 2520 x 312 x 195 24 4.6 36 012 50115 Fiberglass Light grey -40 .. +65 Frontal: 730 (at 150 km/h) Lateral: 380 (at 150 km/h) Rear side: 970 (at 150 km/h) 150 200 6 x 7/16 DIN Female Bottom Internal motor AISG 1.1 / AISG 2.0 2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female
5 11
DXXX-790-960/1710-2180/1710-2180-65/65/65-16i/16i/16i-M/M/M-R
Model: ATR4516R0
Preliminary Issue
RET Properties RET Type RET Protocols Input voltage range (V) Power consumption (W) Adjustment time (full range) (min) Calibration time (min) RET Connector Pin assignment according AISG 1 DC 2 n/c Internal motor AISG 1.1 / AISG 2.0 DC 1030 < 10 (motor activated) < 0.5 (stand by) < 1.5 (typically, depending on antenna type) < 3 (typically, depending on antenna type) 2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female 3 RS-485B 4 n/c 5 6 7 8 n/c RS-485A DC in/out DC return
Standards: y EN 60950-1 (Safety) y EN 55022 (Emission) y EN 55024 (Immunity) y ETSI EN300386 (1.4.1) y FCC part15
HINT Before the installation, check whether the antenna and base station support the same AISG protocol. If not, contact the technical support personnel of Huawei.
HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com
79 0 17 96 10 0/1 71 DX 218 0 XX 0M 21 Hz 80 /
11
DXXX-790-960/1710-2180/1710-2180-65/65/65-17i/17i/17i-M/M/M
Model: ATR451704v01
Electrical Properties Frequency range (MHz) Polarization Electrical downtilt () 0 Gain (dBi) Bottom Top Side lobe suppression for rst side 0 lobe above horizon (Typ.) (dB) 19 Horizontal 3dB beam width () Vertical 3dB beam width () VSWR Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) 0 60 5 16 69 8.4 10 19 0 19 5 17 66 8 10 19 0 19 5 17 65 7.5 10 18 010, continuously adjustable 5 10 0 5 10 0 5 10 0 16.7 16.8 16.6 16.9 17.1 16.7 17.1 17.3 17.0 17.0 17.1 16.6 17.6 17.6 16.8 17.4 17.6 17.0 16.8 17.1 16.7 17.1 17.3 16.8 16.9 17.3 16.9 0 15 5 20 63 Bottom: 7.5 Top: 7.0 < 1.5 Intra-system: 30 Inter-system (790960 / 17102180 MHz): 40 Inter-system (17102180 / 17102180 MHz): 40 Typ. 28 Typ. 28 Typ. 10 500 (at 50 ambient temperature) Avg. 2.5 Avg. 1 (within 10dB HBW) 50 DC Ground Mechanical Properties Antenna dimensions (H x W x D) (mm) Packing dimensions (H x W x D) (mm) Antenna net weight (kg) Bracket weight (kg) Packing weight (kg) Mechanical downtilt () Mast diameter (mm) Radome material Radome colour Operational temperature () Wind load (N) Max. operational wind speed (km/h) Survival wind speed (km/h) Connector Connector position
/ 80 21 z 10 MH 17 0 0/ 18 96 2 XX 0 10 DX 79 17
10 20
0 15
5 15 62
10 16
0 18
5 17 60
10 15
Typ. 29 Typ. 20 Typ. 10 300 (at 50 ambient temperature) -153 (2 x 43 dBm carrier)
Max. power per input (W) Intermodulation IM3 (dBc) Squint () Tracking (dB) Impedance () Grounding
2680 x 259 x 135 3107 x 392 x 230 23 5.6 35 08 50115 Fiberglass Light grey -55 .. +65 Frontal: 970 (at 150 km/h) Lateral: 500 (at 150 km/h) Rear side: 1285 (at 150 km/h) 150 200 6 x 7/16 DIN Female Bottom
7 11
DXXX-790-960/1710-2180/1710-2180-65/65/65-17i/17i/17i-M/M/M
Model: ATR451704v01
61
44
17 56
55 T - Top Column
70 B - Bottom Column
Unit: mm
7/16 (F)
7/16 (F)
7/16 (F)
7/16 (F)
7/16 (F)
7/16 (F)
790960 MHz
HINT Extraordinary operating conditions, such as heavy icing or storm wind, may result in the breakage of an antenna. These facts must be considered during the site planning process. The installation team must be properly qualied and also be familiar with the relevant national safety regulations.
HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com
79 0 17 96 10 0/1 71 DX 218 0 XX 0M 21 Hz 80 /
11 8
DXXX-790-960/1710-2180/1710-2180-65/65/65-17i/17i/17i-M/M/M-R
Model: ATR4517R0
Preliminary Issue
Electrical Properties Frequency range (MHz) Polarization Electrical downtilt () 0 Gain (dBi) Bottom Top Side lobe suppression for rst side 0 lobe above horizon (Typ.) (dB) 17 Horizontal 3dB beam width () Vertical 3dB beam width () VSWR Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) 0 60 Typ. 27 Typ. 20 Typ. 10 500 (at 50 ambient temperature) 50 DC Ground Mechanical Properties Antenna dimensions (H x W x D) (mm) Packing dimensions (H x W x D) (mm) Weight (kg) Mechanical downtilt () Mast diameter (mm) Radome material Radome colour Operational temperature () Wind load (N) Wind speed (km/h) Connector Connector position RET Type RET Protocols RET Connector
/ 80 21 z 10 MH 17 0 0/ 18 96 2 XX 0 10 DX 79 17
790960 790862 824894 880960 17101880 +45, -45 010, continuously adjustable 5 10 0 5 10 0 5 10 0 16.4 16.6 16.3 16.7 16.9 16.5 16.9 17.0 16.7
16.5 16.7 16.1 16.8 16.9 16.3 17.1 17.2 16.6 16.4 16.5 16.0 16.7 16.7 16.0 16.8 17.0 16.2 5 16 69 8.3 10 16 0 17 5 16 66 7.8 10 16 0 17 5 16 65 7.2 10 16 0 17 5 16 66 Bottom: 7.4 Top: 6.9 < 1.5 Intra-system: 30 Inter-system: 40 Typ. 27 Typ. 20 Typ. 10 300 (at 50 ambient temperature) -153 (2 x 43 dBm carrier) 10 15 0 17 5 16 63 Bottom: 7.1 Top: 6.6 10 15 0 17 5 16 60 Bottom: 6.7 Top: 6.1 10 15
Max. power per input (W) Intermodulation IM3 (dBc) Impedance () Grounding
2685 x 259 x 135 3312 x 312 x 195 Antenna: 30.5 Bracket: 5.6 Packing: 43.2 08 50115 Fiberglass Light grey -40 .. +65 Frontal: 970 (at 150 km/h) Lateral: 500 (at 150 km/h) Rear side: 1285 (at 150 km/h) Max. operational: 150 Survival: 200 6 x 7/16 DIN Female Bottom Internal motor AISG 1.1 / AISG 2.0 2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female
9 11
DXXX-790-960/1710-2180/1710-2180-65/65/65-17i/17i/17i-M/M/M-R
Model: ATR4517R0
Preliminary Issue
RET Properties RET Type RET Protocols Input voltage range (V) Power consumption (W) Adjustment time (full range) (min) Calibration time (min) RET Connector Pin assignment according AISG 1 DC 2 n/c Internal motor AISG 1.1 / AISG 2.0 DC 1030 < 10 (motor activated) < 0.5 (stand by) < 1.5 (typically, depending on antenna type) < 3 (typically, depending on antenna type) 2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female 3 RS-485B 4 n/c 5 6 7 8 n/c RS-485A DC in/out DC return
Standards: y EN 60950-1 (Safety) y EN 55022 (Emission) y EN 55024 (Immunity) y ETSI EN300386 (1.4.1) y FCC part15
HINT Before the installation, check whether the antenna and base station support the same AISG protocol. If not, contact the technical support personnel of Huawei.
HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com
79 0 17 96 10 0/1 71 DX 218 0 XX 0M 21 Hz 80 /
12 0
DXXX-790-960/1710-2690/1710-2690-65/65/65-16i/18.5i/18.5i-M/M/M-R
Model: ATR4518R4
Preliminary Issue
Electrical Properties Frequency range (MHz) Polarization Electrical downtilt () Gain (dBi) 0 010, continuously adjustable 5 5 16 66 10.3 10 10 16 0 0 17 5 5 16 64 9.9 10 10 16 0 0 17 5 5 16 62 9.2 < 1.5 Intra-system: 28 Inter-system: 30 Typ. 28 Typ. 18 Typ. 10 500 (at 50 ambient temperature) 50 DC Ground Mechanical Properties Antenna dimensions (H x W x D) (mm) Packing dimensions (H x W x D) (mm) Antenna net weight (kg) Bracket weight (kg) Packing weight (kg) Mechanical downtilt () Mast diameter (mm) Radome material Radome colour Operational temperature () Wind load (N) Max. operational wind speed (km/h) Survival wind speed (km/h) Connector Connector position RET Type RET Protocols RET Connector
/ 90 26 z 10 MH 17 0 0/ 69 96 2 XX 0 10 DX 79 17
15.4 15.6 15.3 15.6 15.8 15.4 16.0 16.1 15.8 18.3 18.3 17.8 18.3 18.5 18.0 18.2 18.3 18.0
Side lobe suppression for rst side 0 lobe above horizon (Typ.) (dB) 17 Horizontal 3dB beam width () Vertical 3dB beam width () VSWR Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) 0 60
Typ. 28 Typ. 17 Typ. 10 250 (at 50 ambient temperature) -153 (2 x 43 dBm carrier)
Max. power per input (W) Intermodulation IM3 (dBc) Impedance () Grounding
1950 x 349 x 148 2390 x 499 x 248 29 4.6 40 012 50115 Fiberglass Light grey -40 .. +65 Frontal: 840 (at 150 km/h) Lateral: 310 (at 150 km/h) Rear side: 1075 (at 150 km/h) 150 200 6 x 7/16 DIN Female Bottom Internal motor AISG 1.1 / AISG 2.0 2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female
1 12
DXXX-790-960/1710-2690/1710-2690-65/65/65-16i/18.5i/18.5i-M/M/M-R
Model: ATR4518R4
Preliminary Issue
RET Properties RET Type RET Protocols Input voltage range (V) Power consumption (W) Adjustment time (full range) (min) Calibration time (min) RET Connector Pin assignment according AISG 1 DC 2 n/c Internal motor AISG 1.1 / AISG 2.0 DC 1030 < 10 (motor activated) < 0.5 (stand by) < 1.5 (typically, depending on antenna type) < 3 (typically, depending on antenna type) 2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female 3 RS-485B 4 n/c 5 6 7 8 n/c RS-485A DC in/out DC return
Standards: y EN 60950-1 (Safety) y EN 55022 (Emission) y EN 55024 (Immunity) y ETSI EN300386 (1.4.1) y FCC part15
HINT Before the installation, check whether the antenna and base station support the same AISG protocol. If not, contact the technical support personnel of Huawei.
HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com
79 0 17 96 10 0/1 71 DX 269 0 XX 0M 26 Hz 90 /
12 2
DXXX-824-960/1710-2170/1710-2170-65/65/65-16.5i/16.5i/16i-M/M/M
Model: ATR451601
Electrical Properties Frequency range (MHz) Polarization VSWR () Gain 824960 (dBi) 17102170 Bottom (dBi) 17102170 Top (dBi) Side lobe suppression for rst side lobe above horizon Horizontal 3dB beam width () Vertical 3dB beam width () Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) Electrical downtilt () Intermodulation IM3 (dBc) Max. CW input power (W) Impedance () Grounding Mechanical Properties Dimensions (H x W x D) (mm) Packing dimensions (H x W x D) (mm) Net weight (kg) Bracket weight (kg) Packing weight (kg) Mechanical downtilt () Mast diameter (mm) Radome material Operational temperature () Wind load (N) Max. wind velocity (km/h) Connector 1925 x 368 x 99 2232 x 492 x 220 24.7 7.7 38.1 08 50115 Fiberglass -55 .. +65 Frontal: 790 (v=150 km/h) Lateral: 205 (v=150 km/h) Rear side: 790 (v=150 km/h) 200 6 x 7/16 DIN Female 500 50 DC Ground 0 60 28 Typ. 20 10 08 -150 (2 x 43 dBm carrier) 250 () (dBi) 0 18 4 17 67 11.5 8 16 0 18 4 17 65 10.8 8 16 0 4 8 0 4 8 0 16.0 16.2 15.9 16.3 16.5 16.2 15.8 16.0 15.7 16.1 16.2 15.9 16.3 16.5 16.2 15.3 15.5 15.2 15.6 15.7 15.4 15.8 16.0 15.7 0 18 4 17 67 10.7 30 25 8 16 0 18 4 17 65 9.9 8 16 0 18 4 17 63 9.2 8 16 824894 880960 17101880 +45 , -45 1.5 4 8 0 4 8 0 4 8 18501990 19202170
/ 70 21 z 10 MH 17 0 0/ 17 96 2 XX 4 10 DX 82 17
7/16 (F)
7/16 (F)
7/16 (F)
7/16 (F)
7/16 (F)
7/16 (F)
3 12
DXXX-824-960/1710-2170/1710-2170-65/65/65-16.5i/16.5i/16i-M/M/M
Model: ATR451601
824870 MHz
870916 MHz
910960 MHz
17101880 MHz
18501990 MHz
19202170 MHz
17101880 MHz
18501990 MHz
19202170 MHz
HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com
82 4 17 96 10 0/1 71 DX 217 0 XX 0M 21 Hz 70 /
12 4
DXXX-824-960/1710-2170/1710-2170-65/65/65-17.5i/17.5i/17i-M/M/M
Model: ATR451703
Electrical Properties Frequency range (MHz) Polarization VSWR () Gain 824960 (dBi) 17102170 Bottom (dBi) 17102170 Top (dBi) Side lobe suppression for rst side lobe above horizon Horizontal 3dB beam width () Vertical 3dB beam width () Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) Electrical downtilt () Intermodulation IM3 (dBc) Max. CW input power (W) Impedance () Grounding Mechanical Properties Dimensions (H x W x D) (mm) Packing dimensions (H x W x D) (mm) Net weight (kg) Bracket weight (kg) Packing weight (kg) Mechanical downtilt () Mast diameter (mm) Radome material Operational temperature () Wind load (N) Max. wind velocity (km/h) Connector 2449 x 368 x 99 2756 x 492 x 220 30.5 7.8 44 015 50115 Fiberglass -55 .. +65 Frontal: 1000 (v=150 km/h) Lateral: 260 (v=150 km/h) Rear side: 1000 (v=150 km/h) 200 6 x 7/16 DIN Female 500 50 DC Ground 0 60 () (dBi) 0 18 4 17 67 8.3 8 16 0 18 4 17 65 7.2 8 16 0 4 8 0 4 8 0 16.8 17.0 16.8 17.3 17.5 17.2 16.7 17.0 16.7 16.9 17.3 16.9 17.3 17.5 17.2 16.3 16.6 16.3 16.6 16.9 16.6 16.9 17.1 16.9 0 18 4 17 67 8.0 30 25 18 10 08 -150 (2 x 43 dBm carrier) 250 8 16 0 18 4 17 65 7.5 8 16 0 18 4 17 63 7.0 8 16 824894 880960 17101880 +45 , -45 1.5 4 8 0 4 8 0 4 8 18501990 19202170
/ 70 21 z 10 MH 17 0 0/ 17 96 2 XX 4 10 DX 82 17
7/16 (F)
7/16 (F)
7/16 (F)
7/16 (F)
7/16 (F)
7/16 (F)
5 12
DXXX-824-960/1710-2170/1710-2170-65/65/65-17.5i/17.5i/17i-M/M/M
Model: ATR451703
824870 MHz
870916 MHz
910960 MHz
17101880 MHz
18501990 MHz
19202170 MHz
17101880 MHz
18501990 MHz
19202170 MHz
HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com
82 4 17 96 10 0/1 71 DX 217 0 XX 0M 21 Hz 70 /
12 6
DXXX-1710-2690/1710-2170/2490-2690-65/65/65-18i/18i/18i-M/M/M
Model: ATR4518R3
Preliminary Issue
Electrical Properties 17102170 24902690 17101990 24902690 17101990 19202170 Polarization +45, -45 Electrical downtilt () 010, continuously adjustable 010, continuously adjustable 0 5 10 0 5 10 0 5 10 0 5 10 0 5 10 0 5 10 Gain (dBi) 17.5 17.6 17.4 17.8 18.0 17.6 17.9 18.2 17.4 17.2 17.3 17.0 17.6 17.8 17.2 17.6 17.9 17.0 Side lobe suppression for rst side 0 5 10 0 5 10 0 5 10 0 5 10 0 5 10 0 5 10 lobe above horizon (Typ.) (dB) 18 17 16 18 17 16 18 17 16 17 16 15 17 16 15 17 16 15 Horizontal 3dB beam width () 69 65 60 69 65 60 Vertical 3dB beam width () 6.5 6.0 4.8 6.5 6.0 4.8 VSWR < 1.5 Intra-system: 30 Isolation between ports (dB) Inter-system: 30 Front to back ratio, copolar (dB) Typ. 27 0 Typ. 18 Cross polar ratio (dB) 60 Typ. 10 Max. power per input (W) 250 (at 50 ambient temperature) Intermodulation IM3 (dBc) -153 (2 x 43 dBm carrier) Impedance () 50 Grounding DC Ground Frequency range (MHz) Mechanical Properties Antenna dimensions (H x W x D) (mm) Packing dimensions (H x W x D) (mm) Antenna net weight (kg) Bracket weight (kg) Packing weight (kg) Mechanical downtilt () Mast diameter (mm) Radome material Radome colour Operational temperature () Wind load (N) Max. operational wind speed (km/h) Survival wind speed (km/h) Connector Connector position RET Type RET Protocols RET Connector 1410 x 323 x 89 1855 x 435 x 190 16.5 4.6 25.5 016 50115 Fiberglass Light grey -40 .. +65 Frontal: 610 (at 150 km/h) Lateral: 115 (at 150 km/h) Rear side: 685 (at 150 km/h) 150 200 6 x 7/16 DIN Female Bottom Internal motor AISG 1.1 / AISG 2.0 2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female 17102690 19202200
HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com
Issue: 2012-06-01
7 12
DXXX-1710-2690/1710-2170/2490-2690-65/65/65-18i/18i/18i-M/M/M
Model: ATR4518R3
Preliminary Issue
RET Properties RET Type RET Protocols Input voltage range (V) Power consumption (W) Adjustment time (full range) (min) Calibration time (min) RET Connector Pin assignment according AISG 1 DC 2 n/c Internal motor AISG 1.1 / AISG 2.0 DC 1030 < 10 (motor activated) < 0.5 (stand by) < 1.5 (typically, depending on antenna type) < 3 (typically, depending on antenna type) 2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female 3 RS-485B 4 n/c 5 6 7 8 n/c RS-485A DC in/out DC return
Standards: y EN 60950-1 (Safety) y EN 55022 (Emission) y EN 55024 (Immunity) y ETSI EN300386 (1.4.1) y FCC part15
HINT Before the installation, check whether the antenna and base station support the same AISG protocol. If not, contact the technical support personnel of Huawei.
HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com
17 10 24 26 90 90 /17 DX 269 10 XX 0M 2 Hz 17 0/
12 8
DXXXX-790-960/1710-2690/1710-2170/2490-2690-65/65/65/ 65-16i/18.5i/18i/18i-M/M/M/M-R
Preliminary Issue
Electrical Properties
Frequency range (MHz) Polarization Electrical downtilt () Gain (dBi)
0
Model: AQU4518R0
17102690
17102170
24902690
17.5 17.6 17.4 17.5 17.6 17.4 17.5 17.6 17.4 17.8 18.0 17.6 17.9 18.2 17.4 17.2 17.3 17.0 17.6 17.8 17.2 17.6 17.9 17.0 5 16 10 16 0 17 5 16 10 16 0 17 4 17 8 16 0 17 4 17 8 16 0 16 4 16 8 15 0 17 4 16 8 16 0 17 4 16 8 16 0 16 4 16 8 15
Side lobe suppression for rst side 0 lobe above horizon (Typ.) (dB) 17 Horizontal 3dB beam width () Vertical 3dB beam width () VSWR Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) 0 60
65 10.2
63 9.6
66 5.2
60 4
66 5.2
63 4.8
60 4
Intra-system: 28 Inter-system: 30 Typ. 28 Typ. 18 Typ. 10 500 (at 50 ambient temperature) Typ. 28 Typ. 17 Typ. 10 250 (at 50 ambient temperature) -153 (2 x 43 dBm carrier) 50 DC Ground
Max. power per input (W) Intermodulation IM3 (dBc) Impedance () Grounding
Mechanical Properties
Antenna dimensions (H x W x D) (mm) Packing dimensions (H x W x D) (mm) Antenna net weight (kg) Bracket weight (kg) Packing weight (kg) Mechanical downtilt () Mast diameter (mm) Radome material Radome colour Operational temperature () Wind load (N) Max. operational wind speed (km/h) Survival wind speed (km/h) Connector Connector position RET Type RET Protocols RET Connector
/ z 90 H 26 0M 69 10 2 17 0 0/ 49 X 96 0/2 XX 0 17 DX 79 2 10 17
1990 x 349 x 148 2390 x 499 x 248 34 4.6 49 012 50115 Fiberglass Light grey -40 .. +65 Frontal: 860 (at 150 km/h) Lateral: 315 (at 150 km/h) Rear side: 1100 (at 150 km/h) 150 200 8 x 7/16 DIN Female Bottom Internal motor AISG 1.1 / AISG 2.0 2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female
9 12
DXXXX-790-960/1710-2690/1710-2170/2490-2690-65/65/65/ 65-16i/18.5i/18i/18i-M/M/M/M-R
Preliminary Issue
RET Properties
RET Type RET Protocols Input voltage range (V) Power consumption (W) Adjustment time (full range) (min) Calibration time (min) RET Connector 1 DC 2 n/c Internal motor AISG 1.1 / AISG 2.0 DC 1030 < 10 (motor activated) < 0.5 (stand by) < 1.5 (typically, depending on antenna type) < 3 (typically, depending on antenna type) 2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female 3 RS-485B 4 n/c 5 RS-485A 6 DC in/out 7 DC return 8 n/c
Model: AQU4518R0
Standards: y EN 60950-1 (Safety) y EN 55022 (Emission) y EN 55024 (Immunity) y ETSI EN300386 (1.4.1) y FCC part15
HINT Before the installation, check whether the antenna and base station support the same AISG protocol. If not, contact the technical support personnel of Huawei.
HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com
17 79 10 0 21 960 70 /1 7 / DX 249 10 XX 0 2 X 26 690 90 / M Hz
13
DX-2300-2700-60-18i-M
Model: A25451804
Frequency range (MHz) Polarization VSWR Gain Side lobe suppression for rst side lobe above horizon Horizontal 3dB beam width ()
Electrical Properties 23002500 25002700 +45 , -45 1.45 () (dBi) () (dB)Typ. 2 17.0 2 18 6 17.3 6 17 64 7.0 30 Typ. 30 15 210 250 50 DC Ground 10 17.0 10 16 2 17.3 2 18 6 17.6 6 17 60 6.5 10 17.1 10 16
Vertical 3dB beam width () Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) Electrical downtilt () Max. CW input power (W) Impedance () Grounding
Mechanical Properties Dimensions (H x W x D) (mm) Packing dimensions (H x W x D) (mm) Net weight (kg) Bracket weight (kg) Packing weight (kg) Mechanical downtilt () Mast diameter (mm) Radomematerial Operating temperature () Wind load (N) Max. wind velocity (km/h) Connector 1060 x 155 x 79 1550 x 260 x 160 6 2.7 10.6 016 50115 Fiberglass -55 .. +65 Frontal: 120 (v=150 km/h) Lateral: 90 (v=150 km/h) Rear side: 180 (v=150 km/h) 200 2 x N-50KF
23002700 X +45 -45
N-50KF
N-50KF
23002500 MHz
25002700 MHz
HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com
23 00
M 00 27 DX Hz
1 13
DXX-2300-2700/2300-2700-65/65-18i/18i-M
Model: A25451803
Frequency range (MHz) Polarization VSWR Gain Side lobe suppression for rst side lobe above horizon Horizontal 3dB beam width ()
Electrical Properties 23002500 25002700 +45 , -45 1.45 () (dBi) () (dB)Typ. 2 17.0 2 18 6 17.3 6 17 65 7.0 30 Typ. 28 15 210 250 50 DC Ground 10 17.0 10 16 2 17.3 2 18 6 17.6 6 17 65 6.5 10 17.1 10 16
Vertical 3dB beam width () Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) Electrical downtilt () Max. CW input power (W) Impedance () Grounding
Mechanical Properties Dimensions (H x W x D) (mm) Packing dimensions (H x W x D) (mm) Net weight (kg) Bracket weight (kg) Packing weight (kg) Mechanical downtilt () Mast diameter (mm) Radomematerial Operating temperature () Wind load (N) Max. wind velocity (km/h) Connector 1060 x 289 x 85 1400 x 405 x 175 11 4.5 18.3 016 50115 Fiberglass -55 .. +65 Frontal: 230 (v=150 km/h) Lateral: 100 (v=150 km/h) Rear side: 340 (v=150 km/h) 200 4 x N-50KF
23002700 X +45 -45 23002700 X +45 -45
N-50KF
N-50KF
N-50KF
N-50KF
23002500 MHz
25002700 MHz
HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com
23 00 27 00 /2 3 DX 00 X 27 00 M Hz
13 2
CX-1710-2690-65-18i-M
Model: A264518S0
Preliminary Issue
Electrical Properties Frequency range (MHz) Polarization Electrical downtilt () Gain (dBi) Side lobe suppression for rst side lobe above horizon (Typ.) (dB) Horizontal 3dB beam width () Vertical 3dB beam width () VSWR Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) Max. power per input (W) Intermodulation IM3 (dBc) Impedance () Grounding Mechanical Properties Antenna dimensions (H x W x D) (mm) Packing dimensions (H x W x D) (mm) Antenna net weight (kg) Packing weight (kg) Radome material Radome colour Operational temperature () Wind load (N) Max. operational wind speed (km/h) Survival wind speed (km/h) Connector Connector position 1425 x 236 2490 x 400 x 400 26.3 32.8 Fiberglass Light grey -55 .. +65 245 (at 150 km/h) 150 200 6 x 7/16 DIN Female (Long neck) Bottom 0 60 0 17.4 0 18 5 17.3 5 17 66 5.8 10 17.2 10 16 0 17.8 0 18 5 17.6 5 17 64 5.2 < 1.5 30 Typ. 28 Typ. 18 Typ. 10 250 (at 50 ambient temperature) -153 (2 x 43 dBm carrier) 50 DC Ground 17102690 17101990 19202200 22002490 +45 , -45 010 , continuously adjustable 10 17.5 10 16 0 18.0 0 18 5 17.8 5 17 62 4.6 10 17.6 10 16 0 18.0 0 18 5 17.8 5 17 59 4.2 10 17.3 10 16 24902690
HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com
17 10
M 90 26 DX Hz
3 13
DTMA08-008 DTMA08-009
Product Description The dual tower mounted amplier (DTMA) is a low-noise amplier installed near the antenna. It helps to improve the signal-to-noise ratio and enhance the receiving sensibility of the BTS. It enhances the uplink coverage and improves uplink and downlink imbalance of the BTS. It effectively reduces the transmitting power of cellphones, improves voice and data communication quality.
Features y High linearity and low noise performance. y Balanced LNA design and power failure bypass for high reliability. y Light weight and compact design. y Variable gain: 8 - 16 dB, default gain: 12 dB. y Wall mounting and mast mounting. y Built-in lightning protection up to 10 kA. y Support AISG 1.1 and AISG 2.0 protocol.
M DT A
5 13
DTMA08-008 DTMA08-009
Tx Specications Frequency range (MHz) Bandwidth (MHz) Insertion loss* (dB) Return loss (dB) Input power (W) Intermodulation products in Rx band (dBm) Frequency range (MHz) Bandwidth (MHz) Return loss(dB) Insertion loss in by-pass mode (dB) Gain (dB) Noise gure** (dB) Output 1dB compression (dBm) OIP3 (dBm) Electrical properties CWA Mode DC supply voltage (V) Operating current per TMA (mA) (without RET) Alarm management (mA) Power consumption (W) Environmental Specication Operating temperature range () IP rating MTBF (hours) EMC Lightning protection (kA) Mechanical Specication DTMA dimensions (W x H x D) (mm) Packing dimensions (W x H x D) (mm) DTMA weight (kg) Packing weight (kg) DTMA Volume (L) AISG connector Mounting Mast diameter (mm) Connector 190 x 240 x 120 (without connectors, without brackets) 365 x 515 x 215 6.1 (with brackets) 7.4 Approx. 5.5 8-pin female, IEC 60130-9 (pin1 & pin6: 8.5V30V DC, pin3: RS485B, pin5: RS485A, pin7: DC return, other pins: not connected) Wall mounting: with 4 screws (max. 8 mm diameter) Mast mounting Default: 30125 // Optional: 40140 4 x 7/16 DIN Female (Long neck) -40 ... +65 IP67 > 1,000,000 ETS 300 342-3 10 (8/20 us) 8.515 40110 150280 < 3.5 AISG Mode 930 40370 AISG 791821 30 Avg. < 0.4 18 < 160 (+52 dBm) CW < 2000 (+63 dBm) peak -117 (2 TX carriers at +43 dBm) Rx Specications 832862 30 18 (DC ON) 13 (DC OFF) 3 (DC OFF) 816 (0.5 dB Step, Default gain: 12 dB) Avg. < 1.4 (12 dB Gain, +22 ... +28 ) 8 (12 dB Gain) 20 (12 dB Gain)
DT M
13 6
DTMA08-008 DTMA08-009
Unit: mm
HINT Extraordinary operating conditions, such as heavy icing or storm wind, may result in the breakage of a DTMA. These facts must be considered during the site planning process. The installation team must be properly qualied and also be familiar with the relevant national safety regulations.
HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com
M DT A
7 13
DTMA09-014 DTMA09-015
Product Description The dual tower mounted amplier (DTMA) is a low-noise amplier installed near the antenna. It helps to improve the signal-to-noise ratio and enhance the receiving sensibility of the BTS. It enhances the uplink coverage and improves uplink and downlink imbalance of the BTS. It effectively reduces the transmitting power of cellphones, improves voice and data communication quality.
Features y High linearity and low noise performance. y Balanced LNA design and power failure bypass for high reliability. y Light weight and compact design. y Variable gain: 8 - 16 dB, default gain: 12 dB. y Wall mounting and mast mounting. y Built-in lightning protection up to 10 kA. y Support AISG 1.1 and AISG 2.0 protocol. Appearance and Block Diagram
DT M
13 8
DTMA09-014 DTMA09-015
Tx Specications Frequency range (MHz) Bandwidth (MHz) Insertion loss* (dB) Return loss (dB) Input power (W) Intermodulation products in Rx band (dBm) Frequency range (MHz) Bandwidth (MHz) Return loss(dB) Insertion loss in by-pass mode (dB) Gain (dB) Noise gure** (dB) Output 1dB compression (dBm) OIP3 (dBm) Electrical properties CWA Mode DC supply voltage (V) Operating current per TMA (mA) (without RET) Alarm management (mA) Power consumption (W) Environmental Specication Operating temperature range () IP rating MTBF (hours) EMC Lightning protection (kA) Mechanical Specication DTMA dimensions (W x H x D) (mm) Packing dimensions (W x H x D) (mm) DTMA weight (kg) Packing weight (kg) DTMA Volume (L) AISG connector Mounting Mast diameter (mm) Connector 198 x 308 x 70.5 (without connectors, without brackets) 315 x 515 x 190 5.5 (with brackets) 6.6 Approx. 4.3 8-pin female, IEC 60130-9 (pin1 & pin6: 8.5V30V DC, pin3: RS485B, pin5: RS485A, pin7: DC return, other pins: not connected) Wall mounting: with 4 screws (max. 8 mm diameter) Mast mounting Default: 30125 // Optional: 40140 4 x 7/16 DIN Female (Long neck) -40 +65 IP67 > 1,000,000 ETS 300 342-3 10 (8/20 us) 8.515 40110 150280 < 3.5 AISG Mode 930 40370 AISG 925950 25 Avg. < 0.4 18 < 160 (+52 dBm) CW < 2000 (+63 dBm) peak -117 (2 TX carriers at +43 dBm) Rx Specications 880905 25 18 (DC ON) 13 (DC OFF) 3.0 (DC OFF) 816 (0.5 dB Step, Default gain: 12 dB) Avg. < 1.4 (12 dB Gain, +22 ... +28 ) 8 (12 dB Gain) 20 (12 dB Gain)
M DT A
9 13
DTMA09-014 DTMA09-015
Unit: mm
HINT Extraordinary operating conditions, such as heavy icing or storm wind, may result in the breakage of a DTMA. These facts must be considered during the site planning process. The installation team must be properly qualied and also be familiar with the relevant national safety regulations.
HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com
DT M
14 0
DTMA09-010 DTMA09-011
Product Description The dual tower mounted amplier (DTMA) is a low-noise amplier installed near the antenna. It helps to improve the signal-to-noise ratio and enhance the receiving sensibility of the BTS system. It enhances the uplink coverage and improves uplink and downlink imbalance of the base station. It effectively reduces the transmitting power of cellphones, improves voice and data communication quality.
Features y High linearity and low noise performance. y Balanced LNA design and power failure bypass for high reliability. y Light weight and compact design. y Variable gain: 8 - 16 dB, default gain: 12 dB. y Wall mounting and mast mounting. y Built-in lightning protection up to 10 kA. y Support AISG 1.1 and AISG 2.0 protocol.
M DT A
1 14
DTMA09-010 DTMA09-011
Tx Specications Frequency range (MHz) Bandwidth (MHz) Insertion loss* (dB) Return loss (dB) Input power (W) Intermodulation products in Rx band (dBm) Frequency range (MHz) Bandwidth (MHz) Return loss(dB) Insertion loss in by-pass mode (dB) Gain (dB) Noise gure** (dB) Output 1dB compression (dBm) OIP3 (dBm) Electrical properties CWA Mode DC supply voltage (V) Operating current per TMA (mA) (without RET) Alarm management (mA) Power consumption (W) Environmental Specication Operating temperature range () IP rating MTBF (hours) EMC Lightning protection (kA) Mechanical Specication DTMA dimensions (W x H x D) (mm) Packing dimensions (W x H x D) (mm) DTMA weight (kg) Packing weight (kg) DTMA Volume (L) AISG connector Mounting Mast diameter (mm) Connector 248 x 324 x 75.5 (without connectors, without brackets) 365 x 515 x 215 6.5 (with brackets) 7.7 Approx. 6.1 8-pin female, IEC 60130-9 (pin1 & pin6: 8.5V30V DC, pin3: RS485B, pin5: RS485A, pin7: DC return, other pins: not connected) Wall mounting: with 4 screws (max. 8 mm diameter) Mast mounting Default: 30125 // Optional: 40140 4 x 7/16 DIN Female (Long neck) -40 ... +65 IP67 > 1,000,000 ETS 300 342-3 10 (8/20 us) 8.515 40110 150280 < 3.5 AISG Mode 930 40370 AISG 925960 35 Avg. < 0.4 18 < 160 (+52 dBm) CW < 2000 (+63 dBm) peak -117 (2 TX carriers at +43 dBm) Rx Specications 880915 35 18 (DC ON) 13 (DC OFF) 3.0 (DC OFF) 816 (0.5 dB Step, Default gain: 12 dB) Avg. < 1.4 (12 dB Gain, +22 ... +28 ) 8 (12 dB Gain) 20 (12 dB Gain)
DT M
14 2
DTMA09-010 DTMA09-011
Unit: mm
HINT Extraordinary operating conditions, such as heavy icing or storm wind, may result in the breakage of a DTMA. These facts must be considered during the site planning process. The installation team must be properly qualied and also be familiar with the relevant national safety regulations.
HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com
M DT A
3 14
DTMA09-016 DTMA09-017
Product Description The dual tower mounted amplier (DTMA) is a low-noise amplier installed near the antenna. It helps to improve the signal-to-noise ratio and enhance the receiving sensibility of the BTS system. It enhances the uplink coverage and improves uplink and downlink imbalance of the base station. It effectively reduces the transmitting power of cellphones, improves voice and data communication quality.
Features y High linearity and low noise performance. y Balanced LNA design and power failure bypass for high reliability. y Light weight and compact design. y Variable gain: 8 - 16 dB, default gain: 12 dB. y Wall mounting and mast mounting. y Built-in lightning protection up to 10 kA. y Support AISG 1.1 and AISG 2.0 protocol. Appearance and Block Diagram
DT M
14 4
DTMA09-016 DTMA09-017
Tx Specications Frequency range (MHz) Bandwidth (MHz) Insertion loss* (dB) Return loss (dB) Input power (W) Intermodulation products in Rx band (dBm) Frequency range (MHz) Bandwidth (MHz) Return loss(dB) Insertion loss in by-pass mode (dB) Gain (dB) Noise gure** (dB) Output 1dB compression (dBm) OIP3 (dBm) Electrical properties CWA Mode DC supply voltage (V) Operating current per TMA (mA) (without RET) Alarm management (mA) Power consumption (W) Environmental Specication Operating temperature range () IP rating MTBF (hours) EMC Lightning protection (kA) Mechanical Specication DTMA dimensions (W x H x D) (mm) Packing dimensions (W x H x D) (mm) DTMA weight (kg) Packing weight (kg) DTMA Volume (L) AISG connector Mounting Mast diameter (mm) Connector 198 x 308 x 70.5 (without connectors, without brackets) 315 x 515 x 190 5.5 (with brackets) 6.6 Approx. 4.3 8-pin female, IEC 60130-9 (pin1 & pin6: 8.5V30V DC, pin3: RS485B, pin5: RS485A, pin7: DC return, other pins: not connected) Wall mounting: with 4 screws (max. 8 mm diameter) Mast mounting Default: 30125 // Optional: 40140 4 x 7/16 DIN Female (Long neck) -40 +65 IP67 > 1,000,000 ETS 300 342-3 10 (8/20 us) 8.515 40110 150280 < 3.5 AISG Mode 930 40370 AISG 935960 25 Avg. < 0.4 18 < 160 (+52 dBm) CW < 2000 (+63 dBm) peak -117 (2 TX carriers at +43 dBm) Rx Specications 890915 25 18 (DC ON) 13 (DC OFF) 3.0 (DC OFF) 816 (0.5 dB Step, Default gain: 12 dB) Avg. < 1.4 (12 dB Gain, +22 ... +28 ) 8 (12 dB Gain) 20 (12 dB Gain)
M DT A
5 14
DTMA09-016 DTMA09-017
Unit: mm
HINT Extraordinary operating conditions, such as heavy icing or storm wind, may result in the breakage of a DTMA. These facts must be considered during the site planning process. The installation team must be properly qualied and also be familiar with the relevant national safety regulations.
HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com
DT M
14 6
DTMA18-022 DTMA18-023
Product Description The dual tower mounted amplier (DTMA) is a low-noise amplier installed near the antenna. It helps to improve the signal-to-noise ratio and enhance the receiving sensibility of the BTS system. It enhances the uplink coverage and improves uplink and downlink imbalance of the base station. It effectively reduces the transmitting power of cellphones, improves voice and data communication quality.
Features y High linearity and low noise performance. y Power failure bypass for high reliability. y Light weight and compact design. y Wall mounting and mast mounting. y Built-in lightning protection up to 10 kA. y Support AISG 1.1 and AISG 2.0 protocol.
M DT A
7 14
DTMA18-022 DTMA18-023
Tx Specications Frequency range (MHz) Bandwidth (MHz) Insertion loss* (dB) Return loss (dB) Input power (W) Intermodulation products in Rx band (dBm) Frequency range (MHz) Bandwidth (MHz) Return loss(dB) Insertion loss in by-pass mode (dB) Gain (dB) Noise gure** (dB) Output 1dB compression (dBm) OIP3 (dBm) Electrical properties CWA Mode DC supply voltage (V) Operating current per TMA (mA) (without RET) Alarm management (mA) Power consumption (W) Environmental Specication Operating temperature range () IP rating MTBF (hours) EMC Lightning protection (kA) Mechanical Specication DTMA dimensions (W x H x D) (mm) Packing dimensions (W x H x D) (mm) DTMA weight (kg) Packing weight (kg) DTMA Volume (L) AISG connector Mounting Mast diameter (mm) Connector 160 x 220 x 100 (without connectors, without brackets) 315 x 465 x 225 5.1 (with brackets) 6.2 Approx. 3.5 8-pin female, IEC 60130-9 (pin1 & pin6: 8.5V30V DC, pin3: RS485B, pin5: RS485A, pin7: DC return, other pins: not connected) Wall mounting: with 4 screws (max. 8 mm diameter) Mast mounting Default: 30125 // Optional: 40140 4 x 7/16 DIN Female (Long neck) -40 ... +65 IP67 > 1,000,000 ETS 300 342-3 10 (8/20 us) 8.515 40120 150280 < 3.5 AISG Mode 930 40370 AISG 18051880 75 Avg. < 0.4 18 < 160 (+52 dBm) CW < 2000 (+63 dBm) peak -117 (2 TX carriers at +43 dBm) Rx Specications 17101785 75 18 (DC ON) 13 (DC OFF) 3.0 (DC OFF) 12 Avg. < 1.4 (+22 ... +28 ) 12 24
DT M
14 8
DTMA18-022 DTMA18-023
Unit: mm
HINT Extraordinary operating conditions, such as heavy icing or storm wind, may result in the breakage of a DTMA. These facts must be considered during the site planning process. The installation team must be properly qualied and also be familiar with the relevant national safety regulations.
HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com
M DT A
9 14
DTMA21-006 DTMA21-007
Product Description The dual tower mounted amplier (DTMA) is a low-noise amplier installed near the antenna. It helps to improve the signal-to-noise ratio and enhance the receiving sensibility of the BTS system. It enhances the uplink coverage and improves uplink and downlink imbalance of the base station. It effectively reduces the transmitting power of cellphones, improves voice and data communication quality.
Features y High linearity and low noise performance. y Power failure bypass for high reliability. y Light weight and compact design. y Wall mounting and mast mounting. y Built-in lightning protection up to 10 kA. y Support AISG 1.1 and AISG 2.0 protocol.
DT M
15 0
DTMA21-006 DTMA21-007
Tx Specications Frequency range (MHz) Bandwidth (MHz) Insertion loss* (dB) Return loss (dB) Input power (W) Intermodulation products in Rx band (dBm) Frequency range (MHz) Bandwidth (MHz) Return loss(dB) Insertion loss in by-pass mode (dB) Gain (dB) Noise gure** (dB) Output 1dB compression (dBm) OIP3 (dBm) Electrical properties CWA Mode DC supply voltage (V) Operating current per TMA (mA) (without RET) Alarm management (mA) Power consumption (W) Environmental Specication Operating temperature range () IP rating MTBF (hours) EMC Lightning protection (kA) Mechanical Specication DTMA dimensions (W x H x D) (mm) Packing dimensions (W x H x D) (mm) DTMA weight (kg) Packing weight (kg) DTMA Volume (L) AISG connector Mounting Mast diameter (mm) Connector 160 x 205 x 54.5 (without connectors, without brackets) 265 x 395 x 195 3.3 (with brackets) 4.0 Approx. 1.8 8-pin female, IEC 60130-9 (pin1 & pin6: 8.5V30V DC, pin3: RS485B, pin5: RS485A, pin7: DC return, other pins: not connected) Wall mounting: with 4 screws (max. 8 mm diameter) Mast mounting Default: 30125 // Optional: 40140 4 x 7/16 DIN Female (Long neck) -40 +65 IP67 > 1,000,000 ETS 300 342-3 10 (8/20 us) 8.515 40120 150280 < 3.5 AISG Mode 930 40370 AISG 21102170 60 Avg. < 0.25 18 < 160 (+52 dBm) CW < 2000 (+63 dBm) peak -122 (2 TX carriers at +43 dBm) Rx Specications 1920 - 1980 60 18 (DC ON) 15 (DC OFF) 3.0 (DC OFF) 12 1 Avg. < 1.2 (+22 ... +28 ) 12 24
M DT A
1 15
DTMA21-006 DTMA21-007
Unit: mm
HINT Extraordinary operating conditions, such as heavy icing or storm wind, may result in the breakage of a DTMA. These facts must be considered during the site planning process. The installation team must be properly qualied and also be familiar with the relevant national safety regulations.
HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com
DT M
15 2
DTMA26-012 DTMA26-013
Product Description The dual tower mounted amplier (DTMA) is a low-noise amplier installed near the antenna. It helps to improve the signal-to-noise ratio and enhance the receiving sensibility of the BTS system. It enhances the uplink coverage and improves uplink and downlink imbalance of the base station. It effectively reduces the transmitting power of cellphones, improves voice and data communication quality.
Features y High linearity and low noise performance. y Power failure bypass for high reliability. y Light weight and compact design. y Wall mounting and mast mounting. y Built-in lightning protection up to 10 kA. y Support AISG 1.1 and AISG 2.0 protocol.
M DT A
3 15
DTMA26-012 DTMA26-013
Tx Specications Frequency range (MHz) Bandwidth (MHz) Insertion loss* (dB) Return loss (dB) Input power (W) Intermodulation products in Rx band (dBm) Frequency range (MHz) Bandwidth (MHz) Return loss(dB) Insertion loss in by-pass mode (dB) Gain (dB) Noise gure** (dB) Output 1dB compression (dBm) OIP3 (dBm) Electrical properties CWA Mode DC supply voltage (V) Operating current per TMA (mA) (without RET) Alarm management (mA) Power consumption (W) Environmental Specication Operating temperature range () IP rating MTBF (hours) EMC Lightning protection (kA) Mechanical Specication DTMA dimensions (W x H x D) (mm) Packing dimensions (W x H x D) (mm) DTMA weight (kg) Packing weight (kg) DTMA Volume (L) AISG connector Mounting Mast diameter (mm) Connector 160 x 210 x 54.5 (without connectors, without brackets) 265 x 395 x 195 3.1 (with brackets) 4.0 Approx. 1.8 8-pin female, IEC 60130-9 (pin1 & pin6: 8.5V30V DC, pin3: RS485B, pin5: RS485A, pin7: DC return, other pins: not connected) Wall mounting: with 4 screws (max. 8 mm diameter) Mast mounting Default: 30125 // Optional: 40140 4 x 7/16 DIN Female (Long neck) -40 ... +65 IP67 > 1,000,000 ETS 300 342-3 10 (8/20 us) 8.515 40120 150280 < 3.5 AISG Mode 930 40370 AISG 26202690 70 Avg. < 0.4 18 < 160 (+52 dBm) CW < 2000 (+63 dBm) peak -117 (2 TX carriers at +43 dBm) Rx Specications 25002570 70 18 (DC ON) 13 (DC OFF) 3.0 (DC OFF) 12 1 Avg. < 1.3 (+22 ... +28 ) 12 24
DT M
15 4
DTMA26-012 DTMA26-013
Unit: mm
HINT Extraordinary operating conditions, such as heavy icing or storm wind, may result in the breakage of a DTMA. These facts must be considered during the site planning process. The installation team must be properly qualied and also be familiar with the relevant national safety regulations.
HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com
M DT A
5 15
DC-0010-2
Model: ACOMD2H00
Product Description y Built-in lightning protection up to 10 kA. y Can be used as a combiner near the BTS or in a reciprocal function near the antenna. y Designed for co-siting purposes and feeder sharing y Suitable for indoor or outdoor applications. y Wall or mast mounting.
Block Diagram
ACOMD2H00
Co
15 6
bi
ne
rs
DC-0010-2
Model: ACOMD2H00
Electrical Properties Model Band 1 Pass band (MHz) Band 2 Insertion loss* (dB) Port 1 Port 3 Port 2 Port 3 DC/AISG transparency Isolation (dB) VSWR Input power (W) Port 1, Port 2 Port 1 Port 3 Port 2 Port 3 ACOMD2H00 698960 17102700 Typ. < 0.2 (698 MHz960 MHz) Typ. < 0.25 (1710 MHz2700 MHz) Stop By-pass (max. 2500 mA) > 40 < 1.28 < 300 < -117 (3rd order; with 2 x 43 dBm) Environmental Specication Operating temperature () Application scene IP rating Lightning protection (kA) Mechanical Specication Combiner dimensions (W x H x D) (mm) Packing dimensions (W x H x D) (mm) Combiner weight (kg) Packing weight (kg) Mounting Mast diameter (mm) Connector Double Unit: 130 x 190 x 105 (without connectors, without mounting brackets) 265 x 415 x 245 Double Unit: 4.3 5.4 Wall mounting // Mast mounting Default: 40135 7/16 DIN Female (Long neck) -40 +65 Indoor // Outdoor IP67 10 (8/20 us)
Co m bi ne rs
7 15
DC-0010-2
Model: ACOMD2H00
Unit: mm HINT Extraordinary operating conditions, such as heavy icing or storm wind, may result in the breakage of a combiner. These facts must be considered during the site planning process. The installation team must be properly qualied and also be familiar with the relevant national safety regulations.
HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com
Co
15 8
bi
ne
rs
DC-0003-2
Model: ACOMD2H02
Preliminary Issue
Product Description y Built-in lightning protection up to 10 kA. y Can be used as a combiner near the BTS or in a reciprocal function near the antenna. y Designed for co-siting purposes and feeder sharing y Suitable for indoor or outdoor applications. y Wall or mast mounting.
Block Diagram
ACOMD2H02
Co m bi ne rs
9 15
DC-0003-2
Model: ACOMD2H02
Preliminary Issue
Electrical Properties Model Band 1 Pass band (MHz) Band 2 Port 1 Port 3 Port 2 Port 3 DC/AISG transparency Isolation (dB) VSWR Input power (W) Port 1, Port 2 Port 1 Port 3 Port 2 Port 3 ACOMD2H02 7901880 19202200 Typ. < 0.15 (790 MHz960 MHz) Typ. < 0.25 (1710 MHz1880 MHz) Typ. < 0.25 (1920 MHz2200 MHz) Stop By-pass (max. 2500 mA) > 45 < 1.28 < 300 < -110 (3rd order; with 2 x 43 dBm) Environmental Specication Operating temperature () Application scene IP rating Lightning protection (kA) Mechanical Specication Connector Mounting Weight (kg) Mast diameter (mm) Dimensions (W x H x D) (mm) 7/16 DIN Female (long neck) Wall mounting // Mast mounting Double Unit: 6 40135 Double Unit: 190 x 154 x 105 (without connectors, without mounting brackets) -40 +65 Indoor // Outdoor IP67 10 (8/20 us)
Co
16 0
bi
ne
rs
DC-0003-2
Model: ACOMD2H02
Preliminary Issue
Unit: mm HINT Extraordinary operating conditions, such as heavy icing or storm wind, may result in the breakage of a combiner. These facts must be considered during the site planning process. The installation team must be properly qualied and also be familiar with the relevant national safety regulations.
HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com
Co m bi ne rs
1 16
DC-0013-2
Model: ACOMD2H04
Product Description y Built-in lightning protection up to 10 kA. y Can be used as a combiner near the BTS or in a reciprocal function near the antenna. y Designed for co-siting purposes and feeder sharing y Suitable for indoor or outdoor applications. y Wall or mast mounting.
Block Diagram
ACOMD2H04
Co
16 2
bi
ne
rs
DC-0013-2
Model: ACOMD2H04
Electrical Properties Model Band 1 Pass band (MHz) Band 2 Insertion loss* (dB) Port 1 Port 3 Port 2 Port 3 DC/AISG transparency Isolation (dB) VSWR Input power (W) Port 1, Port 2 Port 1 Port 3 Port 2 Port 3 ACOMD2H04 790862 880960 Typ. < 0.3 (790 MHz862 MHz) Typ. < 0.25 (880 MHz960 MHz) Stop By-pass (max. 2500 mA) > 50 < 1.28 < 200 < -117 (3rd order; with 2 x 43 dBm) Environmental Specication Operating temperature () Application scene IP rating Lightning protection (kA) Mechanical Specication Combiner dimensions (W x H x D) (mm) Packing dimensions (W x H x D) (mm) Combiner weight (kg) Packing weight (kg) Mounting Mast diameter (mm) Connector Double Unit: 180 x 210 x 107 (without connectors, without mounting brackets) 260 x 365 x 210 Double Unit: 6.8 7.8 Wall mounting // Mast mounting Default: 40135 7/16 DIN Female (Long neck) -40 +65 Indoor // outdoor IP67 10 (8/20 us)
m Co bi ne rs
3 16
DC-0013-2
Model: ACOMD2H04
Unit: mm HINT Extraordinary operating conditions, such as heavy icing or storm wind, may result in the breakage of a combiner. These facts must be considered during the site planning process. The installation team must be properly qualied and also be familiar with the relevant national safety regulations.
HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com
Co
bi
ne
16
rs
DC-0012-2 DC-0021-2
Product Description y Built-in lightning protection up to 10 kA. y Can be used as a combiner near the BTS or in a reciprocal function near the antenna. y Designed for co-siting purposes and feeder sharing y Suitable for indoor or outdoor applications. y Wall or mast mounting.
Block Diagram
ACOMD2H05
ACOMD2H07
Co m bi ne rs
5 16
DC-0012-2 DC-0021-2
Electrical Properties Model Band 1 Pass band (MHz) Band 2 Insertion loss* (dB) Port 1 Port 3 Port 2 Port 3 DC/AISG transparency Isolation (dB) VSWR Input power (W) Port 1, Port 2 Port 1 Port 3 Port 2 Port 3 ACOMD2H05 17101880 19202200 Typ. < 0.25 (1710 MHz1880 MHz) Typ. < 0.25 (1920 MHz2200 MHz) Stop By-pass (max. 2500 mA) > 45 < 1.28 < 300 < -117 (3rd order; with 2 x 43 dBm) Environmental Specication Operating temperature () Application scene IP rating Lightning protection (kA) Mechanical Specication Combiner dimensions (W x H x D) (mm) Packing dimensions (W x H x D) (mm) Combiner weight (kg) Packing weight (kg) Mounting Mast diameter (mm) Connector Double Unit: 160 x 154 x 103 (without connectors, without mounting brackets) 365 x 260 x 210 Double Unit: 4.8 5.7 Wall mounting // Mast mounting Default: 40135 7/16 DIN Female (Long neck) -40 +65 Indoor // Outdoor IP67 10 (8/20 us) By-pass (max. 2500 mA) By-pass (max. 2500 mA) ACOMD2H07
Co
16 6
bi
ne
rs
DC-0012-2 DC-0021-2
Unit: mm HINT Extraordinary operating conditions, such as heavy icing or storm wind, may result in the breakage of a combiner. These facts must be considered during the site planning process. The installation team must be properly qualied and also be familiar with the relevant national safety regulations.
HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com
Co m bi ne rs
7 16
DC-0026-2 DC-0022-2
Product Description y Built-in lightning protection up to 10 kA. y Can be used as a combiner near the BTS or in a reciprocal function near the antenna. y Designed for co-siting purposes and feeder sharing y Suitable for indoor or outdoor applications. y Wall or mast mounting.
Block Diagram
ACOMD2H06
ACOMD2H08
Co
16 8
bi
ne
rs
DC-0026-2 DC-0022-2
Electrical Properties Model Band 1 Pass band (MHz) Band 2 Insertion loss* (dB) Port 1 Port 3 Port 2 Port 3 DC/AISG transparency Isolation (dB) VSWR Input power (W) Port 1, Port 2 Port 1 Port 3 Port 2 Port 3 ACOMD2H06 17101880 19202200 Typ. < 0.25 (1710 MHz1880 MHz) Typ. < 0.25 (1920 MHz2200 MHz) Stop By-pass (max. 2500 mA) > 45 < 1.28 < 300 < -110 (3rd order; with 2 x 43 dBm) Environmental Specication Operating temperature () Application scene IP rating Lightning protection (kA) Mechanical Specication Combiner dimensions (W x H x D) (mm) Packing dimensions (W x H x D) (mm) Combiner weight (kg) Packing weight (kg) Mounting Mast diameter (mm) Connector Double Unit: 160 x 154 x 103 (without connectors, without mounting brackets) 365 x 260 x 210 Double Unit: 4.8 5.7 Wall mounting // Mast mounting Default: 40135 7/16 DIN Female (Long neck) -40 +65 Indoor // Outdoor IP67 10 (8/20 us) By-pass (max. 2500 mA) By-pass (max. 2500 mA) ACOMD2H08
Co m bi ne rs
9 16
DC-0026-2 DC-0022-2
Unit: mm HINT Extraordinary operating conditions, such as heavy icing or storm wind, may result in the breakage of a combiner. These facts must be considered during the site planning process. The installation team must be properly qualied and also be familiar with the relevant national safety regulations.
HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com
Co
17 0
bi
ne
rs
DC-0023-2
Model: ACOMD2H09
Product Description y Built-in lightning protection up to 10 kA. y Can be used as a combiner near the BTS or in a reciprocal function near the antenna. y Designed for co-siting purposes and feeder sharing y Suitable for indoor or outdoor applications. y Wall or mast mounting.
Block Diagram
ACOMD2H09
Co m bi ne rs
1 17
DC-0023-2
Model: ACOMD2H09
Electrical Properties Model Band 1 Pass band (MHz) Band 2 Insertion loss* (dB) Port 1 Port 3 Port 2 Port 3 DC/AISG transparency Isolation (dB) VSWR Input power (W) Port 1, Port 2 Port 1 Port 3 Port 2 Port 3 ACOMD2H09 790862 880960 Typ. < 0.3 (790 MHz862 MHz) Typ. < 0.25 (880 MHz960 MHz) Stop By-pass (max. 2500 mA) > 50 < 1.28 < 200 < -110 (3rd order; with 2 x 43 dBm) Environmental Specication Operating temperature () Application scene IP rating Lightning protection (kA) Mechanical Specication Combiner dimensions (W x H x D) (mm) Packing dimensions (W x H x D) (mm) Combiner weight (kg) Packing weight (kg) Mounting Mast diameter (mm) Connector Double Unit: 180 x 210 x 107 (without connectors, without mounting brackets) 260 x 365 x 210 Double Unit: 6.8 7.8 Wall mounting // Mast mounting Default: 40135 7/16 DIN Female (Long neck) -40 +65 Indoor // Outdoor IP67 10 (8/20 us)
Co
17 2
bi
ne
rs
DC-0023-2
Model: ACOMD2H09
Unit: mm HINT Extraordinary operating conditions, such as heavy icing or storm wind, may result in the breakage of a combiner. These facts must be considered during the site planning process. The installation team must be properly qualied and also be familiar with the relevant national safety regulations.
HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com
Co m bi ne rs
3 17
DC-0017-2
Model: ACOMD2H10
Product Description y Built-in lightning protection up to 10 kA. y Can be used as a combiner near the BTS or in a reciprocal function near the antenna. y Designed for co-siting purposes and feeder sharing y Suitable for indoor or outdoor applications. y Wall or mast mounting.
Block Diagram
ACOMD2H10
Co
17 4
bi
ne
rs
DC-0017-2
Model: ACOMD2H10
Electrical Properties Model Band 1 Pass band (MHz) Band 2 Insertion loss* (dB) Port 1 Port 3 Port 2 Port 3 DC/AISG transparency Isolation (dB) VSWR Input power (W) Port 1, Port 2 Port 1 Port 3 Port 2 Port 3 ACOMD2H10 698960 17102200 Typ. < 0.15 (698 MHz960 MHz) Typ. < 0.15 (1710 MHz2200 MHz) Stop By-pass (max. 2500 mA) > 40 < 1.28 < 300 < -117 (3rd order; with 2 x 43 dBm) Environmental Specication Operating temperature () Application scene IP rating Lightning protection (kA) Mechanical Specication Combiner dimensions (W x H x D) (mm) Packing dimensions (W x H x D) (mm) Combiner weight (kg) Packing weight (kg) Mounting Mast diameter (mm) Connector Double Unit: 130 x 190 x 105 (without connectors, without mounting brackets) 265 x 415 x 245 Double Unit: 4.3 5.4 Wall mounting // Mast mounting Default: 40135 7/16 DIN Female (Long neck) -40 +65 Indoor // Outdoor IP67 10 (8/20 us)
Co m bi ne rs
5 17
DC-0017-2
Model: ACOMD2H10
Unit: mm HINT Extraordinary operating conditions, such as heavy icing or storm wind, may result in the breakage of a combiner. These facts must be considered during the site planning process. The installation team must be properly qualied and also be familiar with the relevant national safety regulations.
HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com
Co
17 6
bi
ne
rs
DC-0019-2
Model: ACOMD2H11
Product Description y Built-in lightning protection up to 10 kA. y Can be used as a combiner near the BTS or in a reciprocal function near the antenna. y Designed for co-siting purposes and feeder sharing y Suitable for indoor or outdoor applications. y Wall or mast mounting.
Block Diagram
ACOMD2H11
Co m bi ne rs
7 17
DC-0019-2
Model: ACOMD2H11
Electrical Properties Model Band 1 Pass band (MHz) Band 2 Insertion loss* (dB) Port 1 Port 3 Port 2 Port 3 DC/AISG transparency Isolation (dB) VSWR Input power (W) Port 1, Port 2 Port 1 Port 3 Port 2 Port 3 ACOMD2H11 698960 17102200 Typ. < 0.15 (698 MHz960 MHz) Typ. < 0.15 (1710 MHz2200 MHz) Stop By-pass (max. 2500 mA) > 40 < 1.28 < 300 < -110 (3rd order; with 2 x 43 dBm) Environmental Specication Operating temperature () Application scene IP rating Lightning protection (kA) Mechanical Specication Combiner dimensions (W x H x D) (mm) Packing dimensions (W x H x D) (mm) Combiner weight (kg) Packing weight (kg) Mounting Mast diameter (mm) Connector Double Unit: 130 x 190 x 105 (without connectors, without mounting brackets) 265 x 415 x 245 Double Unit: 4.3 5.4 Wall mounting // Mast mounting Default: 40135 7/16 DIN Female (Long neck) -40 +65 Indoor // Outdoor IP67 10 (8/20 us)
Co
17 8
bi
ne
rs
DC-0019-2
Model: ACOMD2H11
Unit: mm HINT Extraordinary operating conditions, such as heavy icing or storm wind, may result in the breakage of a combiner. These facts must be considered during the site planning process. The installation team must be properly qualied and also be familiar with the relevant national safety regulations.
HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com
Co m bi ne rs
9 17
DC-0018-2
Model: ACOMD2H12
Product Description y Built-in lightning protection up to 10 kA. y Can be used as a combiner near the BTS or in a reciprocal function near the antenna. y Designed for co-siting purposes and feeder sharing y Suitable for indoor or outdoor applications. y Wall or mast mounting.
Block Diagram
ACOMD2H12
Co
18 0
bi
ne
rs
DC-0018-2
Model: ACOMD2H12
Electrical Properties Model Band 1 Pass band (MHz) Band 2 Insertion loss* (dB) Port 1 Port 3 Port 2 Port 3 DC/AISG transparency Isolation (dB) VSWR Input power (W) Port 1, Port 2 Port 1 Port 3 Port 2 Port 3 ACOMD2H12 698960 24902700 Typ. < 0.15 (698 MHz960 MHz) Typ. < 0.15 (2490 MHz2700 MHz) Stop By-pass (max. 2500 mA) > 45 < 1.28 < 300 < -117 (3rd order; with 2 x 43 dBm) Environmental Specication Operating temperature () Application scene IP rating Lightning protection (kA) Mechanical Specication Combiner dimensions (W x H x D) (mm) Packing dimensions (W x H x D) (mm) Combiner weight (kg) Packing weight (kg) Mounting Mast diameter (mm) Connector Double Unit: 130 x 190 x 105 (without connectors, without mounting brackets) 265 x 415 x 245 Double Unit: 4.3 5.4 Wall mounting // Mast mounting Default: 40135 7/16 DIN Female (Long neck) -40 +65 Indoor // Outdoor IP67 10 (8/20 us)
Co m bi ne rs
1 18
DC-0018-2
Model: ACOMD2H12
Unit: mm HINT Extraordinary operating conditions, such as heavy icing or storm wind, may result in the breakage of a combiner. These facts must be considered during the site planning process. The installation team must be properly qualied and also be familiar with the relevant national safety regulations.
HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com
Co
18 2
bi
ne
rs
DC-0020-2
Model: ACOMD2H13
Product Description y Built-in lightning protection up to 10 kA. y Can be used as a combiner near the BTS or in a reciprocal function near the antenna. y Designed for co-siting purposes and feeder sharing y Suitable for indoor or outdoor applications. y Wall or mast mounting.
Block Diagram
ACOMD2H13
Co m bi ne rs
3 18
DC-0020-2
Model: ACOMD2H13
Electrical Properties Model Band 1 Pass band (MHz) Band 2 Insertion loss* (dB) Port 1 Port 3 Port 2 Port 3 DC/AISG transparency Isolation (dB) VSWR Input power (W) Port 1, Port 2 Port 1 Port 3 Port 2 Port 3 ACOMD2H12 698960 24902700 Typ. < 0.15 (698 MHz960 MHz) Typ. < 0.15 (2490 MHz2700 MHz) Stop By-pass (max. 2500 mA) > 45 < 1.28 < 300 < -110 (3rd order; with 2 x 43 dBm) Environmental Specication Operating temperature () Application scene IP rating Lightning protection (kA) Mechanical Specication Combiner dimensions (W x H x D) (mm) Packing dimensions (W x H x D) (mm) Combiner weight (kg) Packing weight (kg) Mounting Mast diameter (mm) Connector Double Unit: 130 x 190 x 105 (without connectors, without mounting brackets) 265 x 415 x 245 Double Unit: 4.3 5.4 Wall mounting // Mast mounting Default: 40135 7/16 DIN Female (Long neck) -40 +65 Indoor // Outdoor IP67 10 (8/20 us)
Co
18 4
bi
ne
rs
DC-0020-2
Model: ACOMD2H13
Unit: mm HINT Extraordinary operating conditions, such as heavy icing or storm wind, may result in the breakage of a combiner. These facts must be considered during the site planning process. The installation team must be properly qualied and also be familiar with the relevant national safety regulations.
HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com
Co m bi ne rs
5 18
DC-0006-2
Model: ACOMD2L03
Product Description y Built-in lightning protection up to 10 kA. y Can be used as a combiner near the BTS or in a reciprocal function near the antenna. y Designed for co-siting purposes and feeder sharing y Suitable for indoor or outdoor applications. y Wall or mast mounting.
Block Diagram
ACOMD2L03
Co
18 6
bi
ne
rs
DC-0006-2
Model: ACOMD2L03
Electrical Properties Model Band 1 Pass band (MHz) Band 2 Insertion loss* (dB) Port 1 Port 3 Port 2 Port 3 DC/AISG transparency Isolation (dB) VSWR Input power (W) Port 1, Port 2 Port 1 Port 3 Port 2 Port 3 ACOMD2L03 17102200 24902700 Typ. < 0.15 (1710 MHz2200 MHz) Typ. < 0.15 (2490 MHz2700 MHz) By-pass (max. 2500 mA) Stop > 45 < 1.28 < 300 < -117 (3rd order; with 2 x 43 dBm) Environmental Specication Operating temperature () Application scene IP rating Lightning protection (kA) Mechanical Specication Combiner dimensions (W x H x D) (mm) Packing dimensions (W x H x D) (mm) Combiner weight (kg) Packing weight (kg) Mounting Mast diameter (mm) Connector Double Unit: 126 x 102 x 103 (without connectors, without mounting brackets) 365 x 260 x 210 Double Unit: 3.2 4.2 Wall mounting // Mast mounting Default: 40135 7/16 DIN Female (Long neck) -40 +65 Indoor // Outdoor IP67 10 (8/20 us)
Co m bi ne rs
7 18
DC-0006-2
Model: ACOMD2L03
Unit: mm HINT Extraordinary operating conditions, such as heavy icing or storm wind, may result in the breakage of a combiner. These facts must be considered during the site planning process. The installation team must be properly qualied and also be familiar with the relevant national safety regulations.
HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com
Co
18 8
bi
ne
rs
DC-0024-2
Model: ACOMD2L04
Product Description y Built-in lightning protection up to 10 kA. y Can be used as a combiner near the BTS or in a reciprocal function near the antenna. y Designed for co-siting purposes and feeder sharing y Suitable for indoor or outdoor applications. y Wall or mast mounting.
Block Diagram
ACOMD2L04
Co m bi ne rs
9 18
DC-0024-2
Model: ACOMD2L04
Electrical Properties Model Band 1 Pass band (MHz) Band 2 Insertion loss* (dB) Port 1 Port 3 Port 2 Port 3 DC/AISG transparency Isolation (dB) VSWR Input power (W) Port 1, Port 2 Port 1 Port 3 Port 2 Port 3 ACOMD2L04 17102200 24902700 Typ. < 0.15 (1710 MHz2200 MHz) Typ. < 0.15 (2490 MHz2700 MHz) By-pass (max. 2500 mA) Stop > 45 < 1.28 < 300 < -110 (3rd order; with 2 x 43 dBm) Environmental Specication Operating temperature () Application scene IP rating Lightning protection (kA) Mechanical Specication Combiner dimensions (W x H x D) (mm) Packing dimensions (W x H x D) (mm) Combiner weight (kg) Packing weight (kg) Mounting Mast diameter (mm) Connector Double Unit: 126 x 102 x 103 (without connectors, without mounting brackets) 365 x 260 x 210 Double Unit: 3.2 4.2 Wall mounting // Mast mounting Default: 40135 7/16 DIN Female (Long neck) -40 +65 Indoor // Outdoor IP67 10 (8/20 us)
Co
19 0
bi
ne
rs
DC-0024-2
Model: ACOMD2L04
Unit: mm HINT Extraordinary operating conditions, such as heavy icing or storm wind, may result in the breakage of a combiner. These facts must be considered during the site planning process. The installation team must be properly qualied and also be familiar with the relevant national safety regulations.
HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com
Co m bi ne rs
1 19
TC-0011-2 TC-0015-2
Product Description y Built-in lightning protection up to 10 kA. y Can be used as a combiner near the BTS or in a reciprocal function near the antenna. y Designed for co-siting purposes and feeder sharing y Suitable for indoor or outdoor applications. y Wall or mast mounting.
Block Diagram
ACOMT2H00
ACOMT2H02
Co
19 2
bi
ne
rs
TC-0011-2 TC-0015-2
Electrical Properties Model Band 1 Pass band (MHz) Band 2 Band 3 Port 1 Port 4 Insertion loss* (dB) Port 2 Port 4 Port 3 Port 4 Port 1 Port 4 DC/AISG transparency Port 2 Port 4 Port 3 Port 4 Isolation (dB) VSWR Input power (W) Port 1, Port 2, Port3 ACOMT2H00 790960 17101880 19202200 Typ. < 0.15 (790 MHz960 MHz) Typ. < 0.25 (1710 MHz1880 MHz) Typ. < 0.25 (1920 MHz2200 MHz) Stop Stop By-pass (max. 2500 mA) > 45 < 1.28 < 300 < -117 (3rd order; with 2 x 43 dBm) Environmental Specication Operating temperature () Application scene IP rating Lightning protection (kA) Mechanical Specication Combiner dimensions (W x H x D) (mm) Packing dimensions (W x H x D) (mm) Combiner weight (kg) Packing weight (kg) Mounting Mast diameter (mm) Connector Double Unit: 190 x 154 x 105 (without connectors, without mounting brackets) 365 x 260 x 210 Double Unit: 6.3 7.3 Wall mounting // Mast mounting Default: 40135 7/16 DIN Female (Long neck) -40 +65 Indoor // Outdoor IP67 10 (8/20 us) Stop By-pass (max. 2500 mA) By-pass (max. 2500 mA) ACOMT2H02
Co m bi ne rs
3 19
TC-0011-2 TC-0015-2
Unit: mm
HINT Extraordinary operating conditions, such as heavy icing or storm wind, may result in the breakage of a combiner. These facts must be considered during the site planning process. The installation team must be properly qualied and also be familiar with the relevant national safety regulations.
HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com
Co
19 4
bi
ne
rs
TC-0025-2 TC-0016-2
Product Description y Built-in lightning protection up to 10 kA. y Can be used as a combiner near the BTS or in a reciprocal function near the antenna. y Designed for co-siting purposes and feeder sharing y Suitable for indoor or outdoor applications. y Wall or mast mounting.
Block Diagram
ACOMT2H01
ACOMT2H03
Co m bi ne rs
5 19
TC-0025-2 TC-0016-2
Electrical Properties Model Band 1 Pass band (MHz) Band 2 Band 3 Port 1 Port 4 Insertion loss* (dB) Port 2 Port 4 Port 3 Port 4 Port 1 Port 4 DC/AISG transparency Port 2 Port 4 Port 3 Port 4 Isolation (dB) VSWR Input power (W) Port 1, Port 2, Port3 ACOMT2H01 790960 17101880 19202200 Typ. < 0.15 (790 MHz960 MHz) Typ. < 0.25 (1710 MHz1880 MHz) Typ. < 0.25 (1920 MHz2200 MHz) Stop Stop By-pass (max. 2500 mA) > 45 < 1.28 < 300 < -110 (3rd order; with 2 x 43 dBm) Environmental Specication Operating temperature () Application scene IP rating Lightning protection (kA) Mechanical Specication Combiner dimensions (W x H x D) (mm) Packing dimensions (W x H x D) (mm) Combiner weight (kg) Packing weight (kg) Mounting Mast diameter (mm) Connector Double Unit: 190 x 154 x 105 (without connectors, without mounting brackets) 365 x 260 x 210 Double Unit: 6.3 7.3 Wall mounting // Mast mounting Default: 40135 7/16 DIN Female (Long neck) -40 +65 Indoor // Outdoor IP67 10 (8/20 us) Stop By-pass (max. 2500 mA) By-pass (max. 2500 mA) ACOMT2H03
Co
19 6
bi
ne
rs
TC-0025-2 TC-0016-2
Unit: mm HINT Extraordinary operating conditions, such as heavy icing or storm wind, may result in the breakage of a combiner. These facts must be considered during the site planning process. The installation team must be properly qualied and also be familiar with the relevant national safety regulations.
HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com
m Co bi ne rs
7 19
TC-0009-2
Model: ACOMT2M00
Preliminary Issue
Product Description y Built-in lightning protection up to 10 kA. y Can be used as a combiner near the BTS or in a reciprocal function near the antenna. y Designed for co-siting purposes and feeder sharing y Suitable for indoor or outdoor applications. y Wall or mast mounting.
Block Diagram
ACOMT2M00
Co
bi
ne
19
rs
TC-0009-2
Model: ACOMT2M00
Preliminary Issue
Electrical Properties Model Band 1 Pass band (MHz) Band 2 Band 3 Port 1 Port 4 Insertion loss* (dB) Port 2 Port 4 Port 3 Port 4 Port 1 Port 4 DC/AISG transparency Port 2 Port 4 Port 3 Port 4 Isolation (dB) VSWR Input power (W) Port 1, Port 2, Port3 ACOMT2M00 7901880 19202200 24902700 Typ. < 0.15 (790 MHz960 MHz) Typ. < 0.25 (1710 MHz1880 MHz) Typ. < 0.25 (1920 MHz2200 MHz) Typ. < 0.2 (2490 MHz2700 MHz) Stop By-pass (max. 2500 mA) Stop > 45 < 1.28 < 300 < -110 (3rd order; with 2 x 43 dBm) Environmental Specication Operating temperature () Application scene IP rating Lightning protection (kA) Mechanical Specication Connector Mounting Weight (kg) Mast diameter (mm) Dimensions (W x H x D) (mm) 7/16 DIN Female (long neck) Wall mounting // Mast mounting Double Unit: 7 40135 Double Unit: 215 x 200 x 105 (without connectors, without mounting brackets) -40 +65 Indoor // Outdoor IP67 10 (8/20 us)
Co m bi ne rs
9 19
TC-0009-2
Model: ACOMT2M00
Preliminary Issue
Unit: mm
HINT Extraordinary operating conditions, such as heavy icing or storm wind, may result in the breakage of a combiner. These facts must be considered during the site planning process. The installation team must be properly qualied and also be familiar with the relevant national safety regulations.
HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com
Co
20 0
bi
ne
rs
QC-0007-2
Model: ACOMQ2M00
Preliminary Issue
Product Description y Built-in lightning protection up to 10 kA. y Can be used as a combiner near the BTS or in a reciprocal function near the antenna. y Designed for co-siting purposes and feeder sharing y Suitable for indoor or outdoor applications. y Wall or mast mounting.
Block Diagram
ACOMQ2M00
Co m bi ne rs
1 20
QC-0007-2
Model: ACOMQ2M00
Preliminary Issue
Electrical Properties Model Band 1 Band 2 Pass band (MHz) Band 3 Band 4 Port 1 Port 5 Insertion loss* (dB) Port 2 Port 5 Port 3 Port 5 Port 4 Port 5 Port 1 Port 5 DC/AISG transparency Port 2 Port 5 Port 3 Port 5 Port 4 Port 5 Isolation (dB) VSWR Input power (W) Port 1, Port 2 Port 3, Port 4 ACOMQ2M00 790960 17101880 19202200 24902700 Typ. < 0.15 (790 MHz960 MHz) Typ. < 0.25 (1710 MHz1880 MHz) Typ. < 0.25 (1920 MHz2200 MHz) Typ. < 0.2 (2490 MHz2700 MHz) Stop Stop By- pass (max. 2500 mA) stop > 45 < 1.28 < 300 < -110 (3rd order; with 2 x 43 dBm) Environmental Specication Operating temperature () Application scene IP rating Lightning protection (kA) Mechanical Specication Connector Mounting Weight (kg) Mast diameter (mm) Dimensions (W x H x D) (mm) 7/16 DIN Female (long neck) Wall mounting // Mast mounting Double Unit: 7.5 40135 Double Unit: 215 x 200 x 105 (without connectors, without mounting brackets) -40 +65 Indoor // Outdoor IP67 10 (8/20 us)
Co
20 2
bi
ne
rs
QC-0007-2
Model: ACOMQ2M00
Preliminary Issue
Unit: mm HINT Extraordinary operating conditions, such as heavy icing or storm wind, may result in the breakage of a combiner. These facts must be considered during the site planning process. The installation team must be properly qualied and also be familiar with the relevant national safety regulations.
HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com
Co m bi ne rs
3 20
Antenna Model A90451701 A90451704 A19452101 A19451703 A25451803 A25451804 ADU451801 ADU451700 ADU451806 ADU451811 ADU451815 ADU451707 ATR451703 ATR451601 A26451800 A26451900 ADU451816 ADU451901 A79451500v01 A79451600v01 A79451700v01 A19451505 A19451811 A19451902 A194518R0 ADU451819 ADU451902 ADU4518R1 ADU451503 ADU451602v01 ADU451807v01
ARCU01104
ARCU02001
ARCU01101 ARCU01102 ARCU01103 ARCU01100 ARCU01103 ARCU01100 ARCU01103 ARCU01102 ARCU01100 ARCU02000
ATR4516R0 ATR4517R0 A264518S0 A90451702v01 A90451705v01 A90451709 A90451802v01 A90451805v01 A90451706 A19451601 A19451602 A19451800v01 A19451810v01 A19451802v01 A19451704 A19451705 A264518R0 ARCU01109 ARCU02004
ARCU01109
ARCU02004
U RC 5 20
RCU
Model: ARCU01100 (AISG 1.1) ARCU01101(AISG 1.1) ARCU01102 (AISG 1.1) ARCU01103 (AISG 1.1) ARCU02000 (AISG 2.0)
RCU (Remote Control Unit) drives the phase shifter in antenna through mechanical interface to change the electrical downtilt. RCU is suitable for daisy chain solution.
Input voltage range (V) Current (mA) Adjustment time (full range) (min) Calibration time (min) Connectors Pin assignment according AISG Housing material Color Weight (g) Operating temperature range () Protection class Dimensions (L x W x H) (mm) Packing size (L x W x H) (mm) 1 DC 2 n/c
DC 1030 < 600 (motor activated) < 50 (stand by) <2 <4 2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female 3 RS-485B 4 n/c 5 RS-485A Grey 650 -40 +65 IP24 205 x 65.5 x 56 268 x 105 x 95 6 7 8 n/c DC in/out DC return
Drainage Hole
Appearance
Male
Female
HINT: Before the installation, check whether the RCU and base station support the same AISG protocol. If not, contact the technical support personnel of Huawei.
HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com
20 6
RC U
RCU
Model: ARCU01104 (AISG 1.1) ARCU02001 (AISG 2.0)
RCU (Remote Control Unit) drives the phase shifter in antenna through mechanical interface to change the electrical downtilt. RCU is suitable for daisy chain solution.
Input voltage range (V) Current (mA) Adjustment time (full range) (min) Calibration time (min) Connectors Pin assignment according AISG Housing material Color Weight (g) Operating temperature range () Protection class Dimensions (L x W x H) (mm) Packing size (L x W x H) (mm) 1 DC 2 n/c
DC 1030 < 600 (motor activated) < 50 (stand by) <2 <4 2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male // Daisy chain out: Female 3 RS-485B 4 n/c 5 RS-485A Grey 600 -40 +65 IP24 200 x 56 x 47 268 x 105 x 95 6 7 8 n/c DC in/out DC return
Drainage Hole
Drainage Hole
Appearance
Male
Female
HINT: Before the installation, check whether the RCU and base station support the same AISG protocol. If not, contact the technical support personnel of Huawei.
HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com
U RC 7 20
RCU
Model: ARCU01109 (AISG 1.1) ARCU02004 (AISG 2.0)
RCU (Remote Control Unit) drives the phase shifter in antenna through mechanical interface to change the electrical downtilt. RCU is suitable for daisy chain solution.
Input voltage range (V) Current (mA) Adjustment time (full range) (min) Calibration time (min) Connectors Pin assignment according AISG Housing material Color Weight (g) Operating temperature range () Protection class Lightning protection (kA) Dimensions (L x W x H) (mm) Packing size (L x W x H) (mm) 1 DC 2 n/c
DC 1030 < 10 (motor activated) < 0.5 (stand by) < 1.5 (typically, depending on antenna type) < 3 (typically, depending on antenna type) 2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female 3 RS-485B 4 n/c 5 RS-485A 6 7 8 n/c DC in/out DC return
Prole: Aluminium coated / Cover: Aluminium coated RAL 7035 600 -40 +65 IP24 AISG interface (each pin) 3 (10/350 s) 10 (8/20 s) 180 x 65 x 54 268 x 105 x 95
Standards:
EN 60950-1 (Safety) EN 55022 (Emission) EN 55024 (Immunity) ETSI EN300386 (1.4.1) FCC part15 Certication: CEFCCRoHSWEEE
Daisy chain in: Male
HINT: Before the installation, check whether the RCU and base station support the same AISG protocol. If not, contact the technical support personnel of Huawei.
Drainage Hole
Appearance
Male
Female
HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com
20 8
RC U
BT-690-2700-001
Model: ABT000001
Features y y y y y Used to feed DC voltage and OOK control signals into the feeder cable. Low passive intermodulation products, low insertion loss and high power capacity. Ultra wide band design for various communication system. Small volume, light weight. Support AISG 1.1 and AISG 2.0 protocol.
Block Diagram
Port 2 (ANT)
DC/OOK
RF Block
DC Block
Port 1 (BTS)
BT 9 20
BT-690-2700-001
Model: ABT000001
Electrical Properties Frequency range (MHz) Insertion loss (dB) Port 1 Port 2 Port 1 Port 2 Isolation for DC signal (dB) Port 1 Port DC/OOK VSWR Port 1 and Port 2 1.15 (690960 MHz / 17102690 MHz) 1.2 (9601710 MHz) Avg. 500 (690 - 960 MHz) Avg. 250 (1710 - 2690 MHz) 2300 1 (when the current is 2300 mA) 0 +30 50 < -160 (2 x 43 dBm carrier) Environmental Specication Operating temperature () Application scene IP rating Lightning protection (kA) Mechanical Specication BT Dimensions (W x H x D) (mm) Packing dimensions (W x H x D) (mm) BT net Weight (kg) Packing weight (kg) Port 1 (BTS) Connectors Port 2 (Antenna) Port DC/OOK 48.5 x 151 x 45 (with connectors) 78 x 185 x 58 < 0.56 < 0.60 7/16 DIN Male 7/16 DIN Female SMA Female -40 +70 Indoor or outdoor IP66 3 (10/350 us) 70 6902700 0.1 (690960 MHz / 17102690 MHz) 0.15 (9601710 MHz)
Input power (W) Input current (mA) DC voltage reduction (V) DC supply voltage (V) RF Impedance () Intermodulation products (dBc)
21 0
BT
BT-690-2700-001
Model: ABT000001
Unit: mm
HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com
BT 1 21
SBT-690-2700-001 SBT-690-2700-002
Features y Convert signals between OOK and RS485. y Low passive intermodulation products, low insertion loss and high power capacity. y Ultra wide band design for various communication system. y Small volume, light weight. y Support AISG 1.1 and AISG 2.0 protocol.
SBT = Smart Bias Tee RCU = Remote Control Unit for remote electrical control of antenna tilt BTS = Base Transceiver Station AISG= Antenna Interface Standards Group
ASBT00001
ASBT00002
Block Diagram
SB 21 2
SBT-690-2700-001 SBT-690-2700-002
ASBT00001 Antenna (716 DIN Male) Feeder (716 DIN Female) AISG (8-pin Connecter Female)
ASBT00002 BTS (716 DIN Male) Feeder (716 DIN Female) AISG (8-pin Connecter Male)
Electrical Properties Frequency range (MHz) Insertion loss (dB) Isolation for DC signal (dB) VSWR Input power (W) DC supply voltage (V) RF impedance () Intermodulation products (dBc) Power consumption (W) Modem carrier frequency (MHz) Environmental Specication Operating temperature () Application scene IP rating Lightning protection (kA) Mechanical Specication BT Dimensions (W x H x D) (mm) Packing dimensions (W x H x D) (mm) SBT net Weight (kg) Packing weight (kg) 75 x 160 x 45 (with connectors) 78 x 185 x 58 < 0.75 < 0.80 -40 +70 Indoor or outdoor IP67 3 (10/350 us) Port 1 Port 2 Port 1 Port 2 Port 1 Port AISG Port 1 and Port 2 Port 1 and Port 2 Port AISG 6902700 0.1 (690960 MHz / 17102690 MHz) 0.15 (9601710 MHz) 70 1.15 (690960 MHz / 17102690 MHz) 1.2 (9601710 MHz) Avg. 500 (690960 MHz) / Avg. 250 (17102690 MHz) < 2.5 A (+8 +30 V DC) +8 +30 50 < -160 (3rd order, 2 x 43 dBm) Typ. 0.6 2.176
SB T 3 21
SBT-690-2700-001 SBT-690-2700-002
ASBT00001
ASBT00002 Unit: mm HINT Extraordinary operating conditions, such as heavy icing or storm wind, may result in the breakage of a SBT. These facts must be considered during the site planning process. The installation team must be properly qualied and also be familiar with the relevant national safety regulations.
HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com
SB 21 4
Pin Assignment
Female Male Pin Number 1 2 3 4 5 6 7 8 Signal +12V DC Nominal -48V DC Nominal RS485 B RS485 GND RS485 A 10V30V DC DC retum N/C
Technical Specication
Connectors Cable Rate current Protection Class Temperature Range Color Single Bend radius Multiple Bend radius 2 x 8pin AISG female/male 2 x 0.25mm + 4 x 0.75mm 4A IP67 (Coupled) -40 80 Black 60mm Min. 120mm Min.
2 2
Cable series
Length 0.5m 2m 5m 10m 15m 30m 50m 60m 70m
HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com
AI SG 5 21
Pin Assignment
Female Pin Number 1 2 3 4 5 6 7 8 Signal +12V DC Nominal -48V DC Nominal RS485 B RS485 GND RS485 A 10V30V DC DC retum N/C Male Pin Number 1 2 3 4 5 6 7 8 9 N/C RS485 B RS485 GND RS485 A +12V DC Nominal RS 485 GND N/C RS 485 GND Signal +12V DC Nominal
Technical Specication
Connector 1 Connector 2 Cable Rate current Protection Class Temperature Range Color Single Bend radius Multiple Bend radius 8pin AISG Male 9pin D9 Male 4Pair x 24AWG 4A IP67 (Coupled) -40 80 Black 60mm Min. 120mm Min. IEC60130-9 IEC60130-9
Cable series
Length
3m 5m
HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com
AI 21 6
SG
Mounting Instructions
HINT 1. Only qualied personnel are allowed to install the antenna. 2. Appearance of the actual antenna may differ from the pictures.
Installation Tools
Bracket Subassembly
Inclinometer
(1 PCS)
M8 (2 PCS)
(1 PCS)
(1 PCS)
2
1
a Gu llat id ion e 21
In
st
The RCU is optional. For details about how to install Ruler Before adjustment Adjust angle After adjustment the RCU, see the relevant RCU Installation Guide.
Finally, tighten all the nuts. Method 2 Precise measurement Recommended torque: M8 = 18 Nm Before adjustment, adjust the inclinometer to the desired downtilt angle. After adjustment, locate the bead in the inclinometer in the middle.
HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com
In st Gu
n tio la al ide
9 21
HINT 1. Only qualied personnel are allowed to install the antenna. 2. Appearance of the actual antenna may differ from the pictures.
Installation Tools
Bracket Subassembly
(1 PCS)
(1 PCS)
(2 PCS)
a Gu llat id ion e 22
In
st
The RCU is optional. For details about how to install Ruler Before adjustment Adjust angle After adjustment the RCU, see the relevant RCU Installation Guide.
Method 1
Scale of bracket (the actual scale prevails) Finally, tighten all the nuts.
Method 2
Precise measurement
Before adjustment, adjust the inclinometer to the desired downtilt angle. After adjustment, locate the bead in the inclinometer in the middle.
HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com
In st Gu
n tio la al ide
1 22
HINT 1. Only qualied personnel are allowed to install the Dual Tower Mounted Amplier (DTMA). DTMA and BTS support the same frequency band. 2. DTMAs are installed in the similar manner, this document uses a DTMA2600 (Model: ATA261100) as an example. Actual products may differ from the pictures, the actual ones prevail.
Installation Tools
150 mm x 6 mm (5.91 in. x 0.24 in.) 300 mm x 36 mm (12 in. x 1.4 in.) 10
Flat-head screwdriver
Claw hammer
Adjustable wrench
Hammer drill
Insulation tape
Waterproof tape
Wrap tape method : one layer Insulation tape + three layer waterproof tapes + three layer Insulation tapes
Cable ties
ANT 0
ANT 1
Connect the ANT port on the DTMA to the antenna and other ports to the BTS.
a Gu llat id ion e 22
In
st
HINT
Hoop iron
Screw
Shell
Steel strip
1. To partially tighten the hoop iron: press the screw tail into the shell and route the steel strip through the shell. Then press the steel strip towards the pole and strain the steep strip till the steel strip is firmly attached to the pole, as shown in step 1. 2. To release the hoop iron: press the screw tail into the shell, press the steel strip towards the pole, and push the steel strip outwards till the steel strip is released from the shell.
Hoop iron trail into mast mount hole and partially tighten the hoop iron.
In st n tio la al ide Gu
3 22
CAUTION Wall-Mounting the DTMA: rst install the DTMA on the wall, then connect RF jumpers, the AISG cable and the ground cable.
b
1
Wall
3
Install a M8 expansion bolt
a b
5
Install the DTMA
6
1 2
HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com
a Gu llat id ion e 22
www.huawei.com
In
st
HINT 1. Only qualied personnel is allowed to install the Combiner. Combiner and BTS support the same frequency band. 2. This document uses a TC-0011-2 (Model: ACOMT2H00) as an example. Actual products may differ from the pictures, the actual ones prevail.
Installation Tools
150 mm x 6 mm (5.91 in. x 0.24 in.) 300 mm x 36 mm (12 in. x 1.4 in.) 10
Flat-head screwdriver
Claw hammer
Adjustable wrench
Hammer drill
Insulation tape
Waterproof tape
2
Re. Torque: 25 Nm - 30 Nm (220 lbf.in.- 264 lbf.in.)
Wrap tape method : one layer Insulation tape + three layer waterproof tapes + three layer Insulation tapes
4
Cable ties
In st n tio la al ide Gu
5 22
Twist off the rst nut, spring washer, the rst at washer
HINT 1. To partially tighten the hoop iron: press the screw tail into the shell and route the steel strip through the shell. Then press the steel strip towards the pole and strain the steep strip till the steel strip is rmly attached to the pole, as shown in step 1. 2. To release the hoop iron: press the screw tail into the shell, press the steel strip towards the pole, and push the steel strip outwards till the steel strip is released from the shell.
Hoop iron trail into mast mount hole and partially tighten the hoop iron
CAUTION Wall-Mounting the Combiner: rst install the Combiner on the wall, then connect RF jumpers and the ground cable.
a Gu llat id ion e 22
In
st
b
1
Wall
3
Install a M8 expansion bolt
a b
5
Install the Combiner
6
1 2 Install four M8 expansion bolts 3 4
HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com
In st Gu
n tio la al ide
7 22
HINT 1. Only qualied personnel is allowed to install the Remote Control Unit (RCU). 2. The serial No. attached to the RCU is the same with the serial No. in the packaging bag of installation guide. To avoid serial No. confusion, do not separate the RCU from the installation guide. 3. Install RCU hardware under tower. After the installation is complete, you need to congure the RCU onsite. For details about how to congure the RCU, see the RET Antenna Conguration Guide. 4. This document uses installing the RCU on a dual-band antenna (Model: ADU451801) as an example. Actual products may differ from the pictures, the actual ones prevail.
Installation Tools
RCU Description
Drainage hole
Serial No.
Male Female
Adjustable wrench
Appearance
Bottom
Top
Example
Packaging bag
ABCD 01 01 1710-2170
HINT 1. Take the serial No. label out, stick the label to the recording form attached in this document, then write down the information. 2. Cut the recording form off and provide it to the network management personnel.
a Gu llat id ion e 22
In
st
CAUTION 1. Rotate the adjustment screw before installing the RCU. Ensure that the adjustment screw rotates smoothly before installing the RCU. For details, see step 1. 2. When inserting the RCU into the antenna, ensure that two ports match each other. For details, see step 3.
Protective lid
HINT 1. Connect the female connector of Antenna Interface Standards Group (AISG) cable to the male connector of the RCU without removing the protective lid from the female connector of the RCU, see step 1. 2. Connect the other connector of the AISG cable to the SBT or TMA, etc.
In st n tio la al ide Gu
9 22
HINT 1. In the non-daisy chain scenario, an RCU connects with one AISG cable. 2. In the daisy chain scenario, connect each RCU to an AISG cable, then connect the female connector of the upper-level RCU to the male connector of the lower-level RCU with an AISG cable. Do not remove the protective lid from the female connector of the lowest-level RCU.
www.huawei.com
Stick Serial No. Site Name: Site No.: Sector No.: Port No.:
HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com
a Gu llat id ion e 23
www.huawei.com
In
st
HINT 1. Only qualied personnel is allowed to install the Remote Control Unit (RCU). 2. The serial No. attached to the RCU is the same with the serial No. in the packaging bag of installation guide. To avoid serial No. confusion, do not separate the RCU from the installation guide. 3. Install RCU hardware under tower. After the installation is complete, you need to congure the RCU onsite. For details about how to congure the RCU, see the RET Antenna Conguration Guide. 4. This document uses installing the RCU on a single antenna (Model: A19451803) as an example. Actual products may differ from the pictures, the actual ones prevail.
Installation Tools
RCU Description
Drainage hole
Serial No.
Male Female
Adjustable wrench
Appearance
Bottom
Top
Example
Packaging bag
ABCD 01 01 1710-2170
HINT 1. Take the serial No. label out, stick the label to the recording form attached in this document, then write down the information. 2. Cut the recording form off and provide it to the network management personnel.
In st n tio la al ide Gu
1 23
Turn 180
CAUTION 1. The protective cover rotates smoothly before the RCU can be installed. For details, see step 4. 2. When inserting the RCU into the antenna, ensure that the orientation scoop of the RCU is securely locked into the orientation scoop of the antenna. For details, see step 6.
Protective lid
a Gu llat id ion e 23
In
st
HINT 1. In the non-daisy chain scenario, an RCU connects with one AISG cable. 2. In the daisy chain scenario, connect each RCU to an AISG cable, then connect the female connector of the upper-level RCU to the male connector of the lower-level RCU with an AISG cable. Do not remove the protective lid from the female connector of the lowest-level RCU.
www.huawei.com
Stick Serial No. Site Name: Site No.: Sector No.: Port No.:
HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com www.huawei.com
In st Gu
n tio la al ide
3 23
HINT 1. Only qualied personnel is allowed to install the Remote Control Unit (RCU). 2. The serial No. attached to the RCU is the same with the serial No. in the packaging bag of installation guide. To avoid serial No. confusion, do not separate the RCU from the installation guide. 3. Install RCU hardware under tower. After the installation is complete, you need to congure the RCU onsite. For details about how to congure the RCU, see the RET Antenna Conguration Guide. 4. This document uses installing the RCU on a tri-band antenna (Model: ATR451704) as an example. Actual products may differ from the pictures, the actual ones prevail.
Installation Tools
RCU Description
Female
Drainage hole
Adjustable wrench
Appearance
Bottom
Top
Example
Packaging bag
ABCD 01 01 1710-2170
HINT 1. Take the serial No. label out of packaging bag, stick the label to the recording form attached in this document, then write down the information. 2. Cut the recording form off and provide it to the network management personnel.
a Gu llat id ion e 23
In
st
CAUTION 1. The protective cover rotates smoothly before the RCU can be installed. For details, see step 4. 2. When inserting the RCU into the antenna, ensure that the orientation scoop of the RCU is securely locked into the orientation scoop of the antenna. For details, see step 6.
Adjustment spindle
Protective lid
In st n tio la al ide Gu
5 23
HINT 1. In the non-daisy chain scenario, an RCU connects with one AISG cable. 2. In the daisy chain scenario, connect each RCU to an AISG cable, then connect the female connector of the upper-level RCU to the male connector of the lower-level RCU with an AISG cable. Do not remove the protective lid from the female connector of the lowest-level RCU. 3. When installing three RCUs on a tri-band antenna (Model: ATR451704), install them in different directions. To be specic, the side with the nameplate of the RCU on the left faces towards the left, the side with the nameplate of the RCU in the middle faces upwards, and the side with the nameplate of the RCU on the right faces towards the right. See the following gures. For details about installation directions of RCUs on other antennas, see the RET Antenna FAQs.
www.huawei.com
Stick Serial No. Site Name: Site No.: Sector No.: Port No.:
HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com
a Gu llat id ion e 23
www.huawei.com
In
st
HINT 1. Only qualied personnel is allowed to install the OOK Bias Tee (BT). 2. If the BT is installed indoors, no tapes are required to wrap and seal the connector. 3. This document uses a BT (Model: ABT000001) as an example. Actual products may differ from the pictures, the actual ones prevail.
Installation Tools
Insulation tape
Adjustable wrench
Waterproof tape
DC Connector
Male
Installing the BT 1 2
Re. Torque: 25 - 30 Nm (220 - 264lbf.in.)
Wrap tape method : one layer Insulation tape + three layer waterproof tapes + three layer Insulation tapes
In st n tio la al ide Gu
7 23
Installing the BT 4 5 6
Tighten the BT
Wrap tape method : one layer Insulation tape + three layer waterproof tapes + three layer Insulation tapes
8
Torque range: 0.8 - 1.1 Nm (7 - 9 lbf.in.)
Wrap tape method : one layer Insulation tape + three layer waterproof tapes + three layer Insulation tapes
10
Cable ties
Cable ties
HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com
a Gu llat id ion e 23
www.huawei.com
In
st
HINT 1. Only qualied personnel is allowed to install the Smart Bias Tee (SBT). 2. This document uses a SBT (Model: ASBT00001) as an example. Actual products may differ from the pictures, the actual ones prevail.
Installation Tools
SBT Description
Adjustable wrench
Insulation tape
Male
AISG Female
Connect Male of SBT to antenna, ensure that two ports match each other.
In st n tio la al ide Gu
9 23
Installing the BT 4 5 6
Wrap tapes method : one layer Insulation tape + three layer waterproof tapes + three layer Insulation tapes
7
Re. Torque: 25 - 30 Nm (220 - 264 lbf.in.)
9
Cable ties
Cable ties Wrap tapes method : one layer Insulation tape + three layer waterproof tapes + three layer Insulation tapes
HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com
a Gu llat id ion e 24
www.huawei.com
In
st
HINT 1. Only qualied personnel is allowed to install the Smart Bias Tee (SBT). 2. If the SBT is installed indoors, no tapes are required to wrap and seal the connector. 3. This document uses a SBT (Model: ASBT00002) as an example. Actual products may differ from the pictures, the actual ones prevail.
Installation Tools
SBT Description
Adjustable wrench
Female
Torque range: 15 - 18 Nm
Connect Male of SBT to RRU, ensure that two ports match each other.
In st n tio la al ide Gu
1 24
Installing the BT 4 5 6
Wrap tapes method : one layer Insulation tape + three layer waterproof tapes + three layer Insulation tapes
Cable ties
Cable ties Wrap tapes method : one layer Insulation tape + three layer waterproof tapes + three layer Insulation tapes
Connect the female connector of AISG cable to the male connector of SBT
HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com
a Gu llat id ion e 24
www.huawei.com
In
st
Hungary Holland Hub Dubai Hub Mexico West Africa Brazil India China
Copyright Huawei Technologies Co., Ltd. 2012. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. Trademark Notice , HUAWEI, and are trademarks or registered trademarks of Huawei Technologies Co., Ltd.
Other trademarks, product, service and company names mentioned are the property of their respective owners. General Disclaimer
THE INFORMATION IN THIS DOCUMENT MAY CONTAIN PREDICTIVE STATEMENTS INCLUDING, WITHOUT LIMITATION, STATEMENTS REGARDING THE FUTURE FINANCIAL AND OPERATING RESULTS, FUTURE PRODUCT PORTFOLIO, NEW TECHNOLOGY, ETC. THERE ARE A NUMBER OF FACTORS THAT COULD CAUSE ACTUAL RESULTS AND DEVELOPMENTS TO DIFFER MATERIALLY FROM THOSE EXPRESSED OR IMPLIED IN THE PREDICTIVE STATEMENTS. THEREFORE, SUCH INFORMATION IS PROVIDED FOR REFERENCE PURPOSE ONLY AND CONSTITUTES NEITHER AN OFFER NOR AN ACCEPTANCE. HUAWEI MAY CHANGE THE INFORMATION AT ANY TIME WITHOUT NOTICE.
HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: Antenna_IBS@huawei.com Version No.: M3-022337-20120601-C-1.0 www.huawei.com