Professional Documents
Culture Documents
Install PNMT Win7
Install PNMT Win7
Install PNMT Win7
P N M T
ASOLINK
ETWORK
ANAGEMENT
ERMINAL
NEC Corporation
Copyright 2010
NWD-105324
Table of Contents
1. 2. 3. 4. 5. 6. 7. 8. 9. 10.
Installation Sequence ........................................................................................................................ 1 Phone and Modem Options Setting (Standard 19.2Kbps Connection) ........................................ 3 Installation of USB Modem Driver (USB Connection) .................................................................. 9 Dial-up Setting ................................................................................................................................. 15 SNMP Service Setting ..................................................................................................................... 24 PNMT Setup .................................................................................................................................... 26 Firewall Setup .................................................................................................................................. 31 Firewall Setup (with Advanced Security) ...................................................................................... 33 Network Connections Setting on Windows 7 ................................................................................ 38 PNMT Launching ............................................................................................................................ 42
-i-
NWD-105324
1.
Installation Sequence
Only Administrator group privilege level users are authorized to configure the following settings, (1) Dial-up Connection Step 1: Modem Setting
Network Element (NE) other than PASOLINK NEO Standard 19200bps Modem Setting (Phone and Modem Options Setting)
Step 5: Firewall Setup Firewall is disabling on the Dial-up Connections. Step 5: Firewall Setup Firewall is enabling on the Dial-up Connections. Step 5: Firewall Setup with Advanced Security (with Advanced Security)
-1-
NWD-105324
(2) Ethernet Connection Step 1: PASOLINK Network Management Terminal (PNMT) Setup
-2-
NWD-105324
2.
-3-
NWD-105324
(3) Click the Phone and Modem icon in the Control Panel window to start configuring the modem.
(4) If Location Information window will appear, enter your country and area code and then click [OK].
-4-
NWD-105324
(6) Select the Modem tab. Click [Add] to continue with adding the new modem for the PNMT.
-5-
NWD-105324
(7) Check Dont detect my modem ... and click [Next] to continue.
(8) Select Standard Modem Types from the list of Manufacturers and Standard 19200bps Modem from the Models. Click [Next] to continue.
-6-
NWD-105324
(9) Select Selected ports and COM#, then click [Next] to continue.
-7-
NWD-105324
(11) Verify that Standard 19200 bps Modem and COM1 are displayed. Click [OK].
-8-
NWD-105324
3.
(1)
(2)
-9-
NWD-105324
(3)
- 10 -
NWD-105324
(5)
- 11 -
NWD-105324
(6)
Insert the USB driver CD-ROM in the computers disk drive and set Search for driver software in this location and click [Next].
(7)
- 12 -
NWD-105324
(8)
(9)
- 13 -
NWD-105324
NOTE There is a possibility that the USB connection is dropped during a long-duration operation depending on the device type of computer. In the case of a connection failure, please reestablish the dial-up connection.
- 14 -
NWD-105324
4.
Dial-up Setting
(1) Click Start | Control Panel and the Network and Sharing Center icon to start configuring the Dialup setting.
(2)
The Network and Sharing Center window appears. Click Set up a new connection or network in the Tasks area.
- 15 -
NWD-105324
(3)
The Set up a connection or network window appears. Select [Connect to a workplace] and click [Next].
(4)
- 16 -
NWD-105324
- 17 -
NWD-105324
(5)
In the New Connection Wizard window, input connection name and Dial-up phone number field. Check Dont connect now... and click [Next]. In case of connecting with RS232C-Type [PNMT(RS232C)]
- 18 -
NWD-105324
(6)
(7)
- 19 -
NWD-105324
(8)
The Network and Sharing Center window appears. Click [Change adapter setting] in the Connect Dial-up Connection window
(9)
Select Connection and Right Click , Appear context menu and select Connections properties.
RS232C setting
USB setting
- 20 -
NWD-105324
(10)
RS232C setting
USB setting
(11)
RS232C setting
USB setting
- 21 -
NWD-105324
(12)
Retain the default setting on the Options tab and click the PPP Setting.
RS232C setting
USB setting
(13)
In the PPP Setting window, uncheck all the boxes. Click [OK] to go back to the previous window. And click the Security tab.
- 20 -
NWD-105324
(14)
Retain the default setting on the Security tab and click the Networking tab.
RS232C setting
USB setting
(15)
On the Networking tab, uncheck File and Printer ... and Client for Microsoft... and Internet Protocol Version 6(TCP/IPv6)
RS232C setting
USB setting
- 21 -
NWD-105324
(16) (17)
Highlight Internet Protocol (TCP/IPv4) and then click [Properties]. Verify that both Obtain an IP address automatically and Obtain DNS server address automatically are selected.
(18)
Click [Advanced ].
- 22 -
NWD-105324
(19) In the Advanced TCP/IP Settings window, uncheck Use IP header compression for the PPP link. Click [OK].
- 23 -
NWD-105324
5.
(2)
- 24 -
NWD-105324
(3)
Turn off Simple Network Management Protocol(SNMP) and WMI SNMP Provider check box, and click [OK].
- 25 -
NWD-105324
6.
PNMT Setup
NOTE If PNMT software has already been installed, please uninstall it before you install a new version.
(1) Insert the PNMT Installation CDROM. Open the CDROM folder and double-click install.exe.
- 26 -
NWD-105324
(4) Specify the directory in which the PNMT is to be installed. Click [Next]. Restore Default Folder: Click this button to revert to default path Choose: Click this button to select another directory
- 27 -
NWD-105324
NOTE The default path is C:\PNMTj. It is not possible to include blank spaces as in Program Files. (C denotes the directory where the currently running OS is installed)
(5) Specify the License Key file if one is available. Click [Next]. Restore Default File: Click this button to revert to default file Choose: Click this button to choose the license key file
NOTE If no license key file is available, operation in trial mode is possible. IMPORTANT: IMMEDIATE IMPORT OF LICENSE You may use the PNMT on a trial basis for 30 days. After that the PNMT can ONLY be used IF the license has been imported (activated). To obtain the license please contact NEC.
- 28 -
NWD-105324
- 29 -
NWD-105324
NOTE In some cases with Windows7, window shown below might pop-up upon completion of installation. However, please note that installation is complete without any problem.
- 30 -
NWD-105324
7.
Firewall Setup
(1) Go to Control Panel. Click Windows Firewall.
- 31 -
NWD-105324
- 32 -
NWD-105324
8.
- 33 -
NWD-105324
(3) In the Windows Firewall with Advanced Security.Window appears Click Inbound Rules and New Rule... on Actions.
- 34 -
NWD-105324
(5) Select This program path and Click Browse. Select the pnmt on PNMTj Install PATH\bin Click [Next].
- 35 -
NWD-105324
- 36 -
NWD-105324
(10) Input Name filed and Description field and Click [Finish].
- 37 -
NWD-105324
9.
(2) Select the Network and Sharing Center from the Control Panel window.
- 38 -
NWD-105324
- 39 -
NWD-105324
(4) Select the Network Connections from the Network and Internet Connections window. Right click the Local Area Connection and select the Properties from the context menu.
(5) The following Local Area Connection Properties window will appear as default. Select the Internet Protocol Version 4 (TCP/IPv4), then click on the Properties button.
- 40 -
NWD-105324
(6) The following Internet Protocol Version 4 (TCP/IPv4) Properties window will appear. Select the Use the following IP Address instead of the Obtain an IP address automatically. Set the IP address, Subnet mask and Default gateway as follows:
- 41 -
NWD-105324
- 42 -
NWD-105324
(3) Enter User name and Password, and Select the Connection Entry. After installation of the PNMT, the initial password will be:User name: Password: Connection: admin (There is no initial password. Just press Enter. A password can then be set.) In case of connection to 5000S select Ethernet and PNMT (LAN/Direct) entry.
- 43 -
NWD-105324
- 44 -
NWD-105324
NOTE If another application is using the SNMP Port, application initialization will not be possible; the application will shut down, and the following message will appear.
- 45 -