Professional Documents
Culture Documents
Ball Valve Technology That Quickly Turns Things Around: Cameron
Ball Valve Technology That Quickly Turns Things Around: Cameron
Ball Valve Technology That Quickly Turns Things Around: Cameron
CAMERON
ENGINEERED VALVES
HIGH EFFICIENCY
REDUCED TURNS to close by up to 75%, increasing operational efficiency REDUCED RIM PULL benefitting worker health and safety INCREASED SPEED to close by up to 75% for improved process control REDUCED INPUT TORQUE to reduce cost of actuation packages SMALLER ACTUATION packages reducing weight and piping loads
CAMERON T31 FULLY WELDED BALL VALVE
DURABILITY IN DESIGN
6 - 10 teeth in contact vs 1.5 - 3 for standard gears Greater tooth contact and double enveloping shape results in higher torque capability and significantly less backlash Novel tooth shape and high contact ratio results in low contact/bending stress Manganese Bronze gear for increased lubricity, strength and corrosion resistance Ductile iron rugged steel fabricated housings on the MW Series, ductile iron on the LW and BW series O-Ring double sealing system reduces fluid and particulate ingress into the gear (See image next page) Superior high graphite based grease for smooth operation Roller bearings vs plain/needle bearings Bronze output bearings
GROVE B5 SIDE ENTRY TRUNNION MOUNTED BALL VALVE
CAMERON
ENGINEERED VALVES
3-pc 24 in. Class 600 Ball Valve Break Torque 180,650 in-lbs MaxTorque OEM BW1 WG1/S12 255 760 0.61 0.2 156 153
3-pc 36 in. Class 600 Ball Valve Break Torque 478,800 in-lbs MaxTorque OEM BW3 WG1/S12 546 1188 0.61 0.25 333 297
3-pc 42 in. Class 600 Ball Valve Break Torque 757,900 in-lbs MaxTorque OEM BW4 WG1/S12 907 1712 0.61 0.25 553 432
3-pc 24 in. Class 600 Ball Valve Break Torque 180,650 in-lbs MaxTorque OEM BW1 WG1/S12 418 760 0.61 0.2
3-pc 36 in. Class 600 Ball Valve Break Torque 478,800 in-lbs MaxTorque OEM BW3 WG1/S12 1177 1188 0.58 0.25
3-pc 42 in. Class 600 Ball Valve Break Torque 757,900 in-lbs MaxTorque OEM BW4 WG1/S12 1808 1712 0.58 0.25
QUALITY IN MANUFACTURE
Rigorous PC/PLC cycle testing and qualification Direct mount capability reducing cost and chance of stem misalignment/valve failure Designed to handle torques in excess of 1,000,000 Ft/Lbs Made in Maine, USA
INPUT SEALS
CAMERON
ENGINEERED VALVES
VALVES & MEASUREMENT 3250 Briarpark Drive, Suite 300 Houston, Texas 77042 USA Toll Free 800 323 9160
For the most current contact and location information go to: www.c-a-m.com/valvesandmeasurement