This document contains engineering questions from a reinforced concrete course at Minofiya University asking students to design concrete sections for water tanks subjected to various bending moments and tensile/compressive forces using specified concrete compressive strength and rebar types. The six questions vary the applied loads and request design of the concrete section with tension on the water side.
This document contains engineering questions from a reinforced concrete course at Minofiya University asking students to design concrete sections for water tanks subjected to various bending moments and tensile/compressive forces using specified concrete compressive strength and rebar types. The six questions vary the applied loads and request design of the concrete section with tension on the water side.
This document contains engineering questions from a reinforced concrete course at Minofiya University asking students to design concrete sections for water tanks subjected to various bending moments and tensile/compressive forces using specified concrete compressive strength and rebar types. The six questions vary the applied loads and request design of the concrete section with tension on the water side.
Please purchase PDFcamp Printer on http://www.verypdf.com/ to remove this watermark.
Minofiya University Faculty of Engineering Civil Engineering Dept.
Reinforced Concrete Course 4th Year Civil 2011/2012
Sheet NO. (1)
Answer the following questions:1- Design a water tank concrete section (tension on water side) subjected to bending moment of 6 m.t using Fcu = 250 kg/cm2 and steel 36/52 2- Design a water tank concrete section (tension on water side) subjected to bending moment of 2 m.t and tension force 5 t using Fcu = 250 kg/cm2 and steel 36/52 3- Design a water tank concrete section (tension on water side) subjected to bending moment of 5 m.t and tension force 2 t using Fcu = 250 kg/cm2 and steel 36/52 4- Design a water tank concrete section (tension on water side) subjected to bending moment of 3 m.t and compression force 6 t using Fcu = 250 kg/cm2 and steel 36/52 5- Design a water tank concrete section (tension on water side) subjected to bending moment of 6 m.t and compression force 3 t using Fcu = 250 kg/cm2 and steel 36/52 6- Design a water tank concrete section (water side) subjected to axial tension force of 30 ton using Fcu = 250 kg/cm2 and steel 36/52 DR.Heiza K