ees a NN INN) ASME Y14.5M-1994
GaUAL=o ere cA LCR Marien aie)
ae Rela RAPS ASE
Dimensioning and
wel le-Tiaiale)
ASS ead N87)
ox RUE es
Cr) ea aASME Y14.5M
ADOPTION NOTICE
ASME Y14.5M, Dimensioning and Tolerancing, was adopted on 13 March 1994 for use by the Department
of Defense (DoD). Proposed changes by DoD activities must be submitted to the DoD Adopting Activit
Commanding Officer, Naval Aviation Supply Office, ATTN.: Code 0511.07, 700 Robbins Avenue, Philadelphia,
PA 19111-5098, DoD activities may obtain copies of this standard from the Standardization Document Order
Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 1911-094. The private sector and other govern-
ment agencies may purchase copies from the American Society of Mechanical Engineers, 345 East 47th Street,
New York, NY 10017.
Custodians Adopting Activity:
Army — AR Navy — SA
Navy — SA
Air Force — 10 Agent Activity:
DLA — DH ‘Commander
Dahlgren Division
Naval Surface Warfare Center
ATTN: GS2 (King)
17320 Dahlgren Road
Dahlgren, VA 22448-5100
(Project DRPR-0297)
Review activiti
Army — AT, AV, CE, CR, EA, ER, GL, ME, MI, SC, TE
Navy — AS, CH, EC, MC, OS, SH, TD, YD
Air Force — 11, 13, 19, 68, 70, 71, 80, 84, 90, 99
DLA = CS, ES, GS, IS
NSA — NS.
AMSC NIA AREA DRPR
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.AN ASME NATIONAL STANDARD
ENGINEERING DRAWING AND RELATED DOCUMENTATION PRACTICES
Dimensioning and
Tolerancing
ASME Y14.5M-1994
[REVISION OF ANSI Y14.5M-1982 (R1988)]
xX The American Society of
Mechanical Engineers
345 East 47 th Street, New York, N.Y.