Scribd Logo
Upload

Welcome to Scribd!

  • 120 views

    Aimpoint ZeroingTarget Micro Series M01584 A4

    Uploaded by

    KilerMT
    This document provides instructions for zeroing sights using an Aimpoint target. One 6.5mm square on the target equals 2 clicks of adjustment at 25m, 1 click at 50m, and 2 squares equal 1 click at 100m. The target is designed to aid zeroing micro series sights through adjustment based on the number of 6.5mm squares covered by the point of impact at different distances.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Flag for inappropriate content

    You might also like

    Aimpoint ZeroingTarget Micro Series M01584 A4

    Uploaded by

    KilerMT
    120 views1 page
    This document provides instructions for zeroing sights using an Aimpoint target. One 6.5mm square on the target equals 2 clicks of adjustment at 25m, 1 click at 50m, and 2 squares equal 1 click at 100m. The target is designed to aid zeroing micro series sights through adjustment based on the number of 6.5mm squares covered by the point of impact at different distances.

    Original Description:

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Report this Document
    This document provides instructions for zeroing sights using an Aimpoint target. One 6.5mm square on the target equals 2 clicks of adjustment at 25m, 1 click at 50m, and 2 squares equal 1 click at 100m. The target is designed to aid zeroing micro series sights through adjustment based on the number of 6.5mm squares covered by the point of impact at different distances.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Flag for inappropriate content
    Download as pdf or txt
    120 views1 page

    Aimpoint ZeroingTarget Micro Series M01584 A4

    Uploaded by

    KilerMT
    This document provides instructions for zeroing sights using an Aimpoint target. One 6.5mm square on the target equals 2 clicks of adjustment at 25m, 1 click at 50m, and 2 squares equal 1 click at 100m. The target is designed to aid zeroing micro series sights through adjustment based on the number of 6.5mm squares covered by the point of impact at different distances.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Flag for inappropriate content
    Download as pdf or txt
    of 1

    Aimpoint zeroing target for

    Micro series sights


    One 6,5 mm square equals 2 clicks at 25 m

    One 6,5 mm square equals 1 click at 50 m Two 6,5 mm squares equals 1 click at 100 m

    M01584

    You might also like