Professional Documents
Culture Documents
Spec ST1030 - 9851 2455 01 D
Spec ST1030 - 9851 2455 01 D
Spec ST1030 - 9851 2455 01 D
Scooptram ST1030
Technical specication
The Scooptram ST1030 is a reliable 10 tonne underground loader with an ergonomically designed operators compartment for unparalleled productivity in any underground mine. Features
Load frame
A Z-bar front-end for efficient loading and mucking. An aggressively designed high shape factor bucket, reducing the need for multiple passes to fill the bucket. Easy to change bucket and cylinders with split-cap pin retention system. Boom support and lock for safe work under boom.
Power frame
Operators compartment
Ergonomically and spacious designed compartment for maximum safety and minimal operator fatigue with: Maximized legroom because of the Atlas Copcos Footbox. Comfortable operators seat offering improved ergonomic positioning, body orientation and generous shoulder and hip room. Compliant with sound and vibration regulations to minimize operators fatigue; reduced noise level to 82 dB(A) inside the cab.
Atlas Copco unique powertrain including an upbox, and a combined transmission and converter allowing space for the Footbox plus a low and short rear end. Electronic transmission and engine control systems for smooth and precise shifting. A high power-to-weight ratio complemented by a fully integrated powertrain, automatically matching the gear selection to the load - producing a high tractive effort without wheel spin. Stacked V-core radiator and charge air cooler: easy to replace damaged tubes and to clean.
General
Great serviceability with centralized service points. Long-life tapered roller bearing centre hinge. Anti skid material at service access points.
Scooptram ST1030
Specications
Capacities
SAE regulations Tramming capacity Breakout force, hydraulic Breakout force, mechanical 10 000 kg 15 200 kg 13 900 kg
Motion times
Boom Raising Lowering Bucket Dumping Rolling back 2.1 seconds 3.2 seconds 8.0 seconds 6.0 seconds
Matching vehicles
For Scooptram ST1030 Minetruck MT431B Minetruck MT436B
Engine
Cummins Diesel Engine..................... QSL9 C250, Tier/Stage 3 Power Rating at 2000 rpm.................................. 186 kW/250 hp Maximum torque at 1400 rpm.....................................1 085 Nm MSHA Part 7 ventilation rate................................... 255 m3/min Ventilation particulate index..................................... 340 m3/min Rock Tough purifier and silencer. Dry type air cleaner. Exhaust heat protection. Remote engine oil drain. Cooling package with v-core radiator.
Electrical system
System voltage ................................... Start & accessories 24 V Alternator, high output....................................................... 140 A Hydraulic warning system.................... tank & transverter level, tank temperature Rock Tough projection lights. Isolation switch lockout.
Tyres
Tubeless, smooth, extra deep tread design for underground mine service. Tyre size, front and rear......................... 18.00x25, 24 ply, L5S* Wheel rim guards. * As applications and conditions vary, Atlas Copco recommends that the user consults with tyre suppliers to obtain the optimum tyre selection.
Upbox
Power transmitted through a 1:1 gear ratio box. Superior.........................................................................AC826V
Operators compartment
Canopy; MSHA-ISO ROPS/FOPS approved. Side seated operator for bi-directional operation. Two pilot operated joysticks for steering and dump/hoist control. Grammer seat with retractable seat belts. Open door retainer. Door Interlock with steering and dump/hoist circuits.
Axles
Spiral bevel differential, full floating, planetary wheel end drive. Dana. ......................................................................................19D Degree of oscillation. ............................... 20 (10 on each side) Differentials: Front...................................................................Standard Rear..................................................................... No spin
Hydraulic system
Hydraulic tank capacity................................................ 189 litres Manual hudraulic tank fill pump Bucket float Heavy duty gear type pumps System pressure........................................................... 21.4 MPa Filtration, return line. ........................................................4.0 m Cylinders, double acting, chrome plated stems, diameter: Steer cylinders (2).......................................................90 mm Hoist cylinders (2). ....................................................160 mm Stabilizer cylinder.....................................................200 mm
Brakes
Fully enclosed, force cooled, multiple wet discs at each wheel end. Service/parking/emergency brakes................................... SAHR
Fuel
The optional, silenced cab Atlas Copco has developed an operators cab that provides a safe environment and offers the most comfortable place to work. Fuel tank capacity.........................................................284 litres Fuel consumption, full load................................... 50 liters/hour Fuel filtration................................................................... 8.0 m Anti-siphon fuel supply.
System
Ansul dual bottle fire suppression system with engine kill. Fire extinguisher, 6 kg. Central manual lubrication.
Scooptram ST1030
Turning radius
R6135 R6775 3400 4330
3000
R3450 2000 x 45 Chamfered Corner
3400 4330
Rear view
4000
Turning angle +/-42.5. Dimensions shown are based on standard vehicle configuration with 27 mm tyre deflection. All dimensions are shown in millimetres.
Grade performance
Standard conguration, bucket empty
Percent grade Ratio 1st gear (km/h) 2nd gear (km/h) 3rd gear (km/h) 4th gear (km/h) 5.0 8.9 15.8 26.7 4.8 8.5 14.7 23.3 4.8 8.3 13.8 18.9 4.7 8.0 12.8 12.7 0.0 2.0 4.0 6.0 8.0 1:12 4.6 7.8 11.6 10.0 1:10 4.5 7.6 10.2 12.5 1:8 4.4 7.1 7.9 14.3 1:7 4.3 6.8 5.9 4.2 6.5 4.4 4.1 6.2 16.0 18.0 20.0 1:5 4.1 5.8 25.0 1:4 3.9 4.7 3.7 30.0
Optional equipment
Main frame Optional bucket sizes. EOD buckets. High wear resistant bucket packages. Shipping covers. Ergonomics Enclosed cab. Wheel control steering. System Ansul checkfire, autofire suppression. Electric fill pump for hydraulic oil. Fire extinguisher - 6 kg (extra). Heater. Air conditioner. Lincoln auto lube with timer. Wiggins fast fuel fill. Wiggins fast hydraulic tank fill. Loadrite weighing system. RRC (line of sight Radio Remote Control) Electrical system Amber strobe light - power on. Audio-visual reverse alarm. Controls and instruments Blockout 3rd and/or 4th gears. Brake release retriever tow hook. Ride control. Power unit Cold weather packages, 120V or 240V : - Block heater. - Engine oil pan heater. - Battery warmer. - Fuel heater. - Arctic oil. Fire resistant fluids. Documentation LinkOne parts book, CD. LinkOne viewer. Parts kit - 1 000 hour consumables. Other Face mechanics tool set. Shop mechanics tools set. Special tools set. EC specification.
Scooptram ST1030
Buckets
Bucket data
Material density (t/m )
3
STD
1.6
3
1.8
5.6 2 490 3 490 2 080 2 060 5 190 1 550
2.0
5.0 2 490 3 370 1 945 1 920 5 060 1 665
2.2
4.5 2 490 3 270 1 840 1 810 4 980 1 760
2.4
4.2 2 490 3 206 1 770 1 750 4 980 1 820
2.6
3.8 2 490 3 210 1 790 1 750 4 960 1 820
2.8
3.6 2 340 3 130 1 690 1 660 4 960 1 890
3.0
3.3 2 340 3 130 1 690 1 660 4 960 1 890
3.2
3.1 2 340 3 080 1 640 1 610 4 970 1 940
Copyright 2007, Atlas Copco Rock Drills AB, rebro, Sweden. Any unauthorized use or copying of the contents or any part thereof is prohibited. This applies in particular to trademarks, model denominations, part numbers and drawings. llustrations and photos in this brochure may show equipment with optional extras. Specications and equipment subjects to change without notice. Consult your Atlas Copco Customer Center for specic information.
Volume, nominal heaped (m ) Width, bucket (mm) Tramming position: Axle centerline to bucket lip (mm) Tramming position: Ground to bucket tip (mm) Truck loading: Reach (mm) Raised position: Back height, max. (mm) Raised position: Bucket tip, height (mm) W T1 T2 L1 H1 H2
5060 (H1) 40 3400 3046 1750 15 2885 1855 3606 9745 415 1755 3370 (T1) 1920 (L1) 1665 (H2) 1945 (T2)
2355
Side view
1310 2260
2490 (W)
Top view
Dimensions shown are based on standard vehicle configuration with 27 mm tyre deflection. All dimensions are shown in millimetres.