Professional Documents
Culture Documents
S C A N N E R Zforosx: Test Results and Summary
S C A N N E R Zforosx: Test Results and Summary
NOTE: THIS IS A DEMO VERSION. SOME VALUES WILL BE INCOMPLETE UNLESS THE DRIVE OR VOLUME TESTED IS LESS THAN 1OGB IN SIZE. For drives larger than 10GB, consider the contents of this report as inaccurate and for demonstration purposes only. S c a n n e r z must scan an entire drive or volume for historical comparisons and analysis to be accurate. Version 1.2.55.20 _________________________________________________________________
Initial Seek Scan Linear RPI: 3.429593 Initial Seek Scan Ratio RPI: 2.322030 This is an initial scan and the values for the initial and current RPI indices will be identical. The sizing scan completed without any errors. The initial surface scan test passed. The initial linear surface scan RPI has an acceptable value. The initial surface scan ratio RPI has an acceptable value. The seek scan test passed. The seek scan linear RPI has an acceptable value. The seek scan ratio RPI is within acceptable limits. Irregularities were detected in this test. Some irregularities are caused by hardware interrupts or drive contention, which cannot be controlled by this program. Please check your log files for the location of the irregularities. If these are repeatable in subsequent tests, it could indicate a problem developing or an existing irregularity with the drive. Please refer to the users manual for more information.