Professional Documents
Culture Documents
Engine Dimension Request (Revised)
Engine Dimension Request (Revised)
Engine Dimension Request (Revised)
CYLINDER GEOMEOTRY Bore, stroke, connecting rod length, pin offset, piston TDC clearance height, piston area, head area
INTAKE SYSTEM Geometry of manifold, runners, ports (internal diameter at inlet and outlet, length, volume, configuration) (if possible, discharge coefficient)
INTAKE AND EXHAUST VALVE Valve diameter, valve lift profile, valve lash, when does it open and close (relative to crank angle) Discharge coefficient both directions, swirl coefficient, tumble coefficient ( optional)
FUEL INJECTORS Location and number of injectors, number of nozzle hole and nozzle diameter, A/F ratio Injection rate, injection mass, injection timing, injection duration, injection pressure
TURBOCHARGER COMPONENTS Compressor and turbine map (mostly provided by manufacturers) Extrapolating and interpolating to obtain data If have external file (optional)
INTERCOOLER (optional) Number of pipes inside Inlet and outlet diameter Length
If possible, obtain test data from manufacturer regarding the engine power, torque with respect to engine speed for validation purposes.