Professional Documents
Culture Documents
DLD Lab Journal (NAND Gate)
DLD Lab Journal (NAND Gate)
DLD Lab Journal (NAND Gate)
Apparatus:
IC model 7400 Bread board
wires
Procedure:
plugged the given ic in bread board.
Applied +5 DC volt on pin no 14 which acted as VCC supply to ic. Connected pin no 7 to ground. Here in the ic diagram pin no 1 ,2 4,5 9,10 and 12,13 are the input panels . Connected trainer . Mention that pin no 3,6,8,11 are the output panels . To check the output we have connected output panels to the LEDs given on the trainer through wires. 1 ,2 4,5 9,10 and 12,13 to the switches in the
Conclusion :
Here it is the working chart of NAND gate .All we have to do is to check working Of our designed circuit on trainer for NAND gate .
When we set switch A to 0and switch B to 0, we got ON LED. When we set switch A to 0and switch B to 1, we got ON LED. When we set switch A to 1and switch B to 0, we got ON LED. When we set switch A to 1and switch B to 1 , we got ON LED