Download as txt, pdf, or txt
Download as txt, pdf, or txt
You are on page 1of 5

Program - USB_MultiBoot_10.

cmd - 06 June 2008 - Date = Mon 02/17/2014 13:29:07 Prepares MultiBoot USB-Drive provided with Windows XP Setup LocalSource Supports Booting: MS-DOS BartPE WinPE 2.0 and Setup Windows XP GRUB4DOS Menu with DOS FLOPPY IMAGES + Linux + Vista Setup and SYSLINUX Menu *** BEFORE YOU START: *** Use USB-stick with High Read/Write Speed For Vista OS SET User Account Control OFF - XP OS is Preferred for Speed 3x FOR USB-Harddisk make 1900 MB partition at beginning of the USB-Harddisk Use FAT Format and Set Active OR use PeToUSB to Format such partition OR make USB-Harddisk with NTFS Format and NTLDR BootSector using Windows XP Multi-Partition an USB-stick after using INSTALL_DUMMY.cmd for dummydisk HELP SEE: http://www.msfn.org/board/install-XP-USB-t111406.html Use RyanVM Integrator or nLite to Integrate UpdatePacks in your XPSOURCE Integrate in your XPSOURCE BTS DriverPack Massstorage with TXT Mode Enabled Using DPsBase.exe in 1 minute from http://driverpacks.net/DriverPacks/ OEM or nLite winnt.sif File is Auto Changed for Install of XP from USB For UNATTENDED XP Install use the build in Auto Edit UserData Setup Give ProductKey and TimeZone used in Current_winnt.sif Copy of your winnt.sif Remove all other Removable Drives, like USB Backup Harddisks and Memory Cards HPUSBFW.EXE was launched to FORMAT USB-Drive ============================================================================= ================= PART 1 - Preparing Temporary Folder usb_xpbt ============== ============================================================================= DriveList FAT FAT32 NTFS drives = D: F: G: mkbtpath = D:\USB_MultiBoot_10\ usb_type usbdrive xpsource usbconfg bartpe vista = = = = = = USB-stick G: has FileSystem = FAT H:\ X_CONTENT

boot_ini = winnt_sif= oemd_dir = lang_w98 = log type = SYSLINUX = REC_CONS = XPSETUP = USER_NAME=

b_ini\XP_Setup_boot.ini w_sif\Current_winnt.sif $OEM$_UserXP NO Simple NO NO Semi_Unattended None

Date = Mon 02/17/2014 13:34:41 *** Make Temporary Folder usb_xpbt with Custom XP Setup BootFiles *** Parse DOSNET.INF for making Windows XP Setup Bootfolder $WIN_NT$.~BT Making Recovery Console Folder cmdcons .... Making Recovery Console Folder cmdcons Ready

Making Windows XP Setup Bootfolder usb_xpbt\$WIN_NT$.~BT - READY Date = Mon 02/17/2014 13:35:02 makebt\binifix4.cmd 1 File(s) copied makebt\migrate.inf 1 File(s) copied Copy winnt.sif file from w_sif\Current_winnt.sif and for Attended Setup make wi nat.sif 1 file(s) copied. 1 file(s) copied. makebt\ren_fold.cmd 1 File(s) copied makebt\undoren.cmd 1 File(s) copied 1 file(s) copied. H:\\i386\TXTSETUP.SIF 1 File(s) copied 0 File(s) copied H:\\i386\NTDETECT.COM 1 File(s) copied H:\\i386\NTLDR 1 File(s) copied Copy setupldr.bin Renamed as XPSTP because of 5 letter-limit in NTFS BootSector 1 file(s) copied. 1 file(s) copied. usb_xpbt\XATSP: 0x22512 usb_xpbt\XATSP: 0x2251e usb_xpbt\XATSP: 0x225f6 usb_xpbt\XATSP: 0x2271a usb_xpbt\XATSP: 0x22726 usb_xpbt\XATSP: 5 occurrences changed Custom files and XP Root files Copied to Temporary Folder usb_xpbt Ready Adding lines to TXTSETUP.SIF Ready Adding lines to WINNT.SIF Ready Adding $OEM$ folder with UserAccounts and Registry Tweaks $OEM$_UserXP\autologon_reg.txt $OEM$_UserXP\CancelTour.reg $OEM$_UserXP\CmdHere.reg $OEM$_UserXP\CMDLINES.TXT $OEM$_UserXP\Disable_LangBar.reg $OEM$_UserXP\Disable_Shortcut_To.reg $OEM$_UserXP\HKCU_Explorer_Tweaks.reg $OEM$_UserXP\NoWinUp_DriverSearching.reg $OEM$_UserXP\SetClearTypeAU.reg $OEM$_UserXP\SET_WUP.cmd

$OEM$_UserXP\$$\System32\oobe\OOBEINFO_INI.txt 11 File(s) copied useraccounts.cmd Deleted - XPSETUP = Semi_Unattended USER_NAME = None Adding $OEM$ folder with UserAccounts and Registry Tweaks Ready *** Make Temporary Folder usb_xpbt with Custom XP Setup BootFiles Ready *** ============================================================================= === PART 2 - Copy USB Content Source to USB-Drive, Make BootSector Files ==== ============================================================================= USB-Drive - 50 USB-Drive FREE Content Source BartPE Source = = = = 959 MB Existing Folder $WIN_NT$.~LS = 0 MB 959 MB + 50 MB Reserved 1 MB Windows XP Source + OEM Fold = 529 MB 0 MB Vista Source = 0 MB

Making Backups on USB-Drive and Preparing for FileCopy .... Copy Files to USB-Drive Start - Date = Mon 02/17/2014 13:35:17 USB Content Source Folder 35:17 USB Content Source Folder 35:19 Copy to USB-Drive Begin Copy to USB-Drive Ready Date = Mon 02/17/2014 13: Date = Mon 02/17/2014 13:

Copy XP BootFiles and boot.ini If not exist ..... usb_xpbt\boot.ini 1 File(s) copied usb_xpbt\NTDETECT.COM 1 File(s) copied usb_xpbt\NTLDR 1 File(s) copied Make Bootsector Files in btsec Folder .... usb_xpbt\XPSTP 1 File(s) copied usb_xpbt\XATSP 1 File(s) copied BootSector Files for TXT Mode Setup XP were made FAT16 BootSector Detected - OK No USB MultiBoot Content - Remove MS-DOS and WinPE 2.0 from boot.ini Menu ============================================================================= ================= PART 3 - Copy XP Source to USB-Drive ====================== ============================================================================= USB-Drive - 50 USB-Drive FREE Win XP Source BartPE Source = = = = 959 MB Existing Folder $WIN_NT$.~LS = 0 MB 957 MB + 50 MB Reserved 529 MB 0 MB Vista Source = 0 MB Copy to USB-Drive Begin Copy to USB-Drive Ready Date = Mon 02/17/2014 13:35:22 Date = Mon 02/17/2014 13:35:45

$WIN_NT$.~BT Folder $WIN_NT$.~BT Folder usb_xpbt\TXTSETUP.SIF

1 File(s) copied usb_xpbt\XPSTP 1 File(s) copied Copy XPSOURCE Folders cmpnents and i386 - Begin 6 Copy XP Folders cmpnents and i386 AMD64 - Ready 1 Copy Custom Files + $OEM$ Folder To USB-Drive usb_xpbt\$WIN_NT$.~LS\$OEM$\autologon_reg.txt usb_xpbt\$WIN_NT$.~LS\$OEM$\CancelTour.reg usb_xpbt\$WIN_NT$.~LS\$OEM$\CmdHere.reg usb_xpbt\$WIN_NT$.~LS\$OEM$\CMDLINES.TXT usb_xpbt\$WIN_NT$.~LS\$OEM$\Disable_LangBar.reg usb_xpbt\$WIN_NT$.~LS\$OEM$\Disable_Shortcut_To.reg usb_xpbt\$WIN_NT$.~LS\$OEM$\HKCU_Explorer_Tweaks.reg usb_xpbt\$WIN_NT$.~LS\$OEM$\NoWinUp_DriverSearching.reg usb_xpbt\$WIN_NT$.~LS\$OEM$\SetClearTypeAU.reg usb_xpbt\$WIN_NT$.~LS\$OEM$\SET_WUP.cmd usb_xpbt\$WIN_NT$.~LS\$OEM$\$$\System32\oobe\OOBEINFO_INI.txt usb_xpbt\$WIN_NT$.~LS\I386\binifix4.cmd usb_xpbt\$WIN_NT$.~LS\I386\ren_fold.cmd usb_xpbt\$WIN_NT$.~LS\I386\undoren.cmd 14 File(s) copied FileCopy to USB-Drive is Ready - Date = Mon 02/17/2014 13:51:44 ============================================================================= ============ PART 5 Finish - COPY VISTA TO USB - Change migrate.inf ========= ============================================================================= No BartPE Folders - BartPE Removed from boot.ini Menu No Vista Directory - Skip Vista Copy USB-Drive becomes Boot Drive U: - MkMigrateInf2 Ready ============================================================================= *** HELP for Using MultiBoot USB-Drive *** Read Help_USB_MultiBoot.txt File Boot with USB-Drive plugged and Press [Delete] or F2 to Enter BIOS Setup Change BIOS Boot Settings: Harddisk is First Boot Device Type and USB-Drive is seen as First Harddisk Reboot from USB-Drive and Make Selection from Boot Menu ============================================================================= ***** HELP for Using USB-Drive for Install of Windows XP: ***** First Remove ALL Other USB-Drives ** So Harddisk in Setup gets DriveLetter C Reboot from USB-Drive and Select 1. Begin TXT Mode Setup Windows XP Use Only C: Drive of Computer Harddisk as Partition for Install of Windows XP and then Select Quick Format with NTFS FileSystem, XP Install is Automatic ***** NEVER UNPLUG USB-Drive ***** Until After First Logon of Windows XP New Harddisk and Creating Partitions after Booting from USB-Drive: Direct after Deleting and Creating New partitions, Quit XP Setup with F3 OR Switch OFF your Computer and Boot in any case from USB-Drive again and Run 1. TXT Mode Setup again so that DriveLetters get their Correct Value So in this case one Boots ** TWICE ** in the TXT-mode Setup Date = Mon 02/17/2014 13:51:4 Date = Mon 02/17/2014 13:35:4

End Program - USB_MultiBoot.CMD will be Closed - Date = Mon 02/17/2014 13:52:03

You might also like