1. The document provides instructions for installing and setting up a BSC621-2 C/Ku LNB, including the parts included, how to connect the Ku and C-band signals using a coax jumper, and how to properly install and adjust the LNB on the dish for optimal performance.
2. It describes using a scalar ring to mount the LNB to the dish, a dielectric plate for circular signals, and a coax jumper to connect the Ku portion to the switching device. It also provides tips on properly pointing the LNB at the center of the dish and adjusting for best signal quality.
3. The document is from DMS International providing contact information for sales and support.
1. The document provides instructions for installing and setting up a BSC621-2 C/Ku LNB, including the parts included, how to connect the Ku and C-band signals using a coax jumper, and how to properly install and adjust the LNB on the dish for optimal performance.
2. It describes using a scalar ring to mount the LNB to the dish, a dielectric plate for circular signals, and a coax jumper to connect the Ku portion to the switching device. It also provides tips on properly pointing the LNB at the center of the dish and adjusting for best signal quality.
3. The document is from DMS International providing contact information for sales and support.
1. The document provides instructions for installing and setting up a BSC621-2 C/Ku LNB, including the parts included, how to connect the Ku and C-band signals using a coax jumper, and how to properly install and adjust the LNB on the dish for optimal performance.
2. It describes using a scalar ring to mount the LNB to the dish, a dielectric plate for circular signals, and a coax jumper to connect the Ku portion to the switching device. It also provides tips on properly pointing the LNB at the center of the dish and adjusting for best signal quality.
3. The document is from DMS International providing contact information for sales and support.
Thanks for buying DMS Internationals BSC621-2 C/Ku LB!
You should have the following
parts in addition to the main body of the BSC621-2 C/Ku !B"# 1# $he S%alar &ing' used to mount the BSC621-2 to your dish# You will noti%e it has holes that allow you to use ( support arms or ) support arms depending on your dish# $here is a pa%*age of bolts that mount the dish arms to the s%alar ring# +t in%ludes the bolt that mounts the BSC621-2 to the s%alar ring# 2# $he di-ele%tri% plate is used for %ir%ular signals# +t %onverts your linear polarity to %ir%ular# )# $he Coa, -umper is used to %onne%t the Ku part of the BSC621-2 to the swit%hing devi%e lo%ated on the side of the BSC621-2# $his diagram shows how to %onne%t the Ku and C-band so it %an be delivered down one %oa,# oo*ing at the diagram' you will see the Ku %onne%tion is at the end of the BSC621-2# .sing the Coa, -umper' %onne%t it to the port mar*ed /!B0 on the side of the BSC621-2# Conne%t the %oa, that delivers signal to your re%eiver to the remaining port' mar*ed /&C10# $he band swit%hing is a%%omplished by 2iS34C %ontrol sent from your re%eiver# Setting your re%eiver 2iS34C to 51 or 6 will give you C-band' and setting your re%eiver 2iS34C to 52 or B will give you Ku-band# 7roperly installing the !B" on your dish is %riti%al# 6fter atta%hing the s%alar ring to your support arms' you should %onfirm that it is pointing to the %enter of your dish# 8ne way to do this is to measure from the edge of your dish to the edge of the s%alar ring in several pla%es around your dish# $hese measurements should be the same# +f not' your feed is not pointing to the %enter of your dish and will not perform as intended# 6fter finding a signal' turn the !B" to find the best polarity performan%e# 2o this on both polarities# Carefully move the !B" toward the dish and away from the dish to find the best operating distan%e# 6fter finding the best possible performan%e tighten the set s%rew to hold the !B" in pla%e# The BSC621-2 has the ability to re"ei#e "ir"ular $olari%e& signals' &emove the end %ap from the !B"# +nsert the di-ele%tri% plate in the throat guides# &epla%e the end %ap# 29S +nternational : )2; B !orthpoint 7ar*way S3 : 6%worth' <6 );1;2 .S6 $el= >>;-?2@-6A;; : "a,= >>;-?2@-6A(; email= salesBdmsiusa#%om - http=//www#dmsiusa#%om