BS 8110: Part 1: 1985
pe 624.012.3/.476013
(Reprinted, incorporating Amendments No. 1 and No. 2)
British Standard
Structural use of concrete
Part 1. Code of practice for design and construction
Utilisation du béton en construction
Partie 1. Code de bonne pratique pour le calcul et la construction
Beton in Hochbau
Teil 1. Leitfaden fiir Berechnung, und Konstruktion
NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW
ES‘AMD 7583
“-
= Amendment No. 3
— published and affective from 16 March 1993
| to BS 8110: Part 1: 1985
Structural use of concrete
Part 1. Code of practice for design and
construction
NOTE. This amenamant doesnot take acount of the 1991
revision of the Brien Standord cement and concrete
Mo 7562 Contents (as amended by Amendment No. 1)
Maron 1993,
In thelist of table, dolete ‘9.10 Banding moment and shoar foroe coefficients for flat
slabs of three or more equal spans’ and substitute ‘3.19 Table deleted"
In thelist of figures, delete ‘2.17 Punching shear zone’ and eubstitute'2.17 Zones for
unchina shear reinforcement
‘AMO 7583 Clause 2.2.7 Lightning
In tine 2 delete ‘CP 926° and substicute BS 6651’
amo 7582 Clause 2.4.1.7 Normal earth loads, E,,
In line 3 elate ‘CP 2004" and sustitate RS 800"
‘AMO 7583 Clause 3.1.7.4 Characteristic strengths of reinforcement
In Fine 9 delete ‘BS 4461" a substitute BS 4482.
amo 758 Clause 3.4.4.4 Design tormulae tor rectangular beams
ln the last line of the equations delete “A, = K'F, bd /0.87 fy2 +44!” and cubstitute
‘A,
= ITB? 1087 Fy2) A
amo 7503 Clause 3.4.4.5 Dosign ultimate moments of resistance (flanged beams where the
Maren 99 outral axis falls below the flange)
In lines 1 and 2 delete the existing title and substitute ‘Design formulae for flanged beams
vwnere the neutral axis fall below the Hang.”