Professional Documents
Culture Documents
02 MCCBs1
02 MCCBs1
DS Page
Fixed Overload & Fixed Short-circuit
release with Normal Breaking Capacity
Technical Data 2/9,2/10
l-t Characteristic Curves 2/26
MCCB Ordering Data 2/36
Accessories Ordering Data 2/45
Overall Dimensions 2/56,2/57
DTH..E Page
Fixed Overload & Fixed Short-circuit
release with High Breaking Capacity
Technical Data 2/11
l-t Characteristic Curves 2/27
MCCB Ordering Data 2/36
Accessories Ordering Data 2/46
Overall Dimensions 2/58
DG Page
Adjustable Overload & Fixed Short-circuit
release with Normal Breaking Capacity
Technical Data 2/12
l-t Characteristic Curves 2/28
MCCB Ordering Data 2/37
Accessories Ordering Data 2/47
Overall Dimensions 2/59,2/60
DH Page
Adjustable Overload & Fixed
Short-circuit release with
Standard Breaking Capacity
Technical Data 2/13,2/14
l-t Characteristic Curves 2/29
MCCB Ordering Data 2/38
Accessories Ordering Data 2/48
Overall Dimensions 2/61,2/62
DL Page
Adjustable Overload & Fixed
Short-circuit release with
High Breaking Capacity
Technical Data 2/15
l-t Characteristic Curves 2/30
MCCB Ordering Data 2/39
Accessories Ordering Data 2/49
Overall Dimensions 2/63,2/64
DTH Page
Adjustable Overload & Fixed Short-circuit
release (Conventional MCCBs) with
High Breaking Capacity
Technical Data 2/16,2/17
l-t Characteristic Curves 2/31
MCCB Ordering Data 2/40
Accessories Ordering Data 2/50
Overall Dimensions 2/65,2/66
DX..S Page
Adjustable Overload & adjustable Short-
circuit with standard Breaking Capacity
3 & 4 Pole
Technical Data 2/18,2/19
l-t Characteristic Curves 2/32-2/34
MCCB Ordering Data 2/41
Accessories Ordering Data 2/51,2/52
Overall Dimensions 2/67-2/71
DX..H Page
Adjustable Overload & adjustable Short-
circuit with high Breaking Capacity 3 & 4
Pole
Technical Data 2/20-2/22
l-t Characteristic Curves 2/32-2/35
MCCB Ordering Data 2/42
Accessories Ordering Data 2/51-2/53
Overall Dimensions 2/67-2/75
DM Page
Motor protection MCCBs
Technical Data 2/23
MCCB Ordering Data 2/43
Accessories Ordering Data 2/54
Overall Dimensions 2/76,2/77
Type 2 Co-ordination Chart 2/83
DTH Instantaneous Page
lnstantaneous MCCBs
Technical Data 2/24
MCCB Ordering Data 2/44
Accessories Ordering Data 2/55
Overall Dimensions 2/78
DF Page
Fuse Monitoring device
Technical Data 2/25
Ordering Data 2/44
Accessories Ordering Data 2/55
Overall Dimensions 2/79
Wiring Diagram 2/79
MOULDED CASE CIRCUIT BREAKERS
ACCESSORIES
INTERNAL
Note : For ordering information, refer pages 2/45 - 2/55
UNDER VOLTAGE RELEASE
The under voltage release is used for protecting the installation against low voltage
situation. The under voltage release is designed to operate when the voltage
drops below a tripping threshold. This can also be used for remote tripping &
electrical interlocking purpose.
The tripping threshold is :
35% to 70% of rated in AC
35% to 70% of rated in DC
Circuit breaker closing is possible only if the voltage exceeds 85% of the rated
voltage.
AUXILIARY CONTACT BLOCK
The auxiliary contact block is used for remote signaling and control purposes.
This consists of one or more than one potential free change-over contacts. lt
indicates the circuit breaker status- whether open or closed.
TRIP ALARM CONTACT
The trip alarm contact gives tripping indication once the MCCB trips. The potential
free change- over contacts can be used for indication or for control circuit.
SHUNT RELEASE
The shunt release provides remote tripping of the circuit breaker. The coil of
shunt release is designed for short time as well as continuous operation (`DX`
range).
The operation voltage is :
85% to 110% of the rated voltage in AC
75% to 125% of the rated voltage in DC
Shunt release coil is short time rated, micro-switch is provided in the release to
cut off the supply. Once the MCCB trips, this prevents burning of coil even if the
supply to shunt coil is continuously fed.
"
ACCESSORIES
FOR 'DX' RANGE
ANNUNCIATION UNIT
Annunciation unit indicates the differential remote and local operating states
like
- Tripping by Overload release
- Tripping be Short-circuit release
- Early-alarm in the event that the Overload release setting is about to be
exceeded.
Annunciation unit has 1NO+1NC.
RESIDUAL CURRENT OPERATED RELAYS
These are factory fitted with adjustable rated fault current and delay time.
MECHANICAL INTERLOCK
For mechanical interlocking of Two or Three MCCBs with Toggle or Potary
drive in the same distribution panel.
PARALLELING MECHANISM
For simultaneous operation of two MCCBs mounted side by side, using a
Potary drive.
SIDE WALL OPERATOR
This is to be used for actuating the Breaker from the side of the control
panel or for changing the Potary movement by 90o
WITHDRAWABLE UNIT
Three position Withdrawable units are available for 3 and 4 PoleMCCBs
(250A and above).
PLUG-IN ADAPTORS
3 pole `DX` range of MCCBs (upto 250A) are also available with plug-in
adaptor modules.
EXTERNAL
PAPALLELlNG MECHANlSM
ELECTPlCAL & MECHANlCAL lNTEPLOCK
ADAPTOR TERMINAL WITH SHROUD / SPREADER
LINKS WITH BARRIERS
Adaptor terminals / Spreader links can be connected to basic MCCBs to facilitate
termination of higher size of cables / links.
The barrier is made of material with high dielectric strength. lt is used to ensure
the electrical clearance between breaker terminals. lt also prevents troubles
caused by contact of conductive material to the terminals.
Shrouds are used on both the sides of MCCB to provide additional safety and
are made of superior insulating material with good mechanical & electrical
properties. The shrouds are designed for click-fit fixing & thus do not need any
fixing hardware. Shroud prevents accidental contact to bare terminals.
ADAPTOP TEPMlNAL
SHPOUD
Note : For ordering information, refer pages 2/45 - 2/55
#
ACCESSORIES
EXTERNAL
ROTARY OPERATING MECHANISM
The circuit breaker has a toggle handle operating mechanism, which also serves
as swtiching position indicator ON, OFF, TPlP. But when the circuit breaker is
installed in switchgear cubicles or distribution boards, it requires to be operated
outside of the switchgear cubicles or distribution boards. The mechanism is
designed for direct attachment to the MCCB and transforms the toggle handle
movement into a rotation. lt facilitates operation of MCCB when the panel door is
closed.
IT'S FEATURES
Easy operation
Door interlock mechanism. lt doesn`t allow the circuit breaker to be ON"
when the door of switchgear cubicles or distribution boards is open thus
prevents the operator from an unsafe condition.
Door interlock defeat facility. This enables only authorized personnel to open
the door with MCCB in ON condition for the purpose of inspection.
FOR 'DX' RANGE
REMOTE OPERATOR (MOTORISED)
For remote `ON` and `OFF` of circuit breakers. Local switching by hand also
possible.
Note : For ordering information, refer pages 2/45 - 2/55
$
ACCESSORIES RANGE
DS DTH..E DG DH DL DTH DX..S DX..H DM DF
Auxiliary Contacts
Standard
Early make - - - - - - - -
General Trip alarm
Contact alarm - - - - - - - -
Separate contact alarm - - - - - - - -
Under voltage release
Non-delayed -
Off-delayed - - - - - - - -
Shunt release
Without early make aux. Contact
With early make aux. Contact - - - - - - - -
Pemote operator - - - - - - - -
Potary operating mechanism -
Paralleling mechanism - - - - - - - -
Mechanical interlock - - - - - - - -
Castell lock - - - - - - - -
Earth-fault module -
Earth-leakage module - - - - - - - -
Plug-in module - - - - - - - -
Withdrawable module - - - - - - - -
Adaptor terminals - - - - - - -
Spreader terminals - - - - -
Enclosure - - - - - - -
Available; Not Available
Note : Accessories mounting / location as per page 2/45 to 2/55
&
TECHNICAL DATA - DS
Type Designation DS 100 DS 125 DS 160
Pated Uninterrupted current
at 40
o
C. - lth (AC/DC) A 100 125 160
Pated impulse withstand voltage - Uimp kv 8 8 8
Pated operational voltage - Ue v AC 415 415 415
v DC 250 250 250
Frequency Hz 50/60 50/60 50/60
Pated insulation voltage - Ui v 690 690 690
Operating Temperature C -5 to +55 -5 to +55 -5 to +55
Overvoltage category / pollution degree lll/3 lll/3 lll/3
Pated Short-circuit making capacity - lcm kA 17 17 32
Pated ultimate S.C. breaking capacity - lcu
at 415v ac kA 10 10 16
Pated Service S.C. breaking capacity - lcs
at 415v ac kA 50% 50% 50%
Utilisation category A A A
Mechanical life
Electrical life
Pelease Type Thermal-Magnetic Thermal-Magnetic Thermal-Magnetic
Overload release setting Fixed Fixed Fixed
Short Circuit release setting (+/- 20%) 9*ln 9*ln 8*ln
Weight kg 1.7 1.7 1.7
Terminal capacity Cables mm
2
50 70 95
Links mm 16 22 22
Accessories
Auxiliary contacts (1NO+1NC) (1NO+1NC) (1NO+1NC)
Shunt release y y y
Under voltage release y y y
Trip alarm contacts y y y
Earth fault module y y y
Potary operating mechanism y y y
As per standard lS 13947-2 / lEC 60947-2
TECHNICAL DATA - DS
Type Designation DS 200 DS 250 DS 400
Pated Uninterrupted current
at 40
o
C. - lth (AC/DC) A 200 250 400
Pated impulse withstand voltage - Uimp kv 8 8 8
Pated operational voltage - Ue v AC 415 415 415
v DC 250 250 250
Frequency Hz 50/60 50/60 50/60
Pated insulation voltage - Ui v 690 690 690
Operating Temperature C -5 to +55 -5 to +55 -5 to +55
Overvoltage category / pollution degree lll/3 lll/3 lll/3
Pated Short-circuit making capacity - lcm kA 32 52.5 52.5
Pated ultimate S.C. breaking capacity - lcu
at 415v ac kA 16 25 25
Pated Service S.C. breaking capacity - lcs
at 415v ac kA 50% 50% 50%
Utilisation category A A A
Mechanical life
Electrical life
Pelease Type Thermal-Magnetic Thermal-Magnetic Thermal-Magnetic
Overload release setting Fixed Fixed Fixed
Short Circuit release setting (+/- 20%) 6*ln 6*ln 6*ln
Weight kg 2.4 5 5
Terminal capacity Cables mm
2
150 300 300
Links mm 30 40 40
Accessories
Auxiliary contacts (1NO+1NC) (2NO+2NC) (2NO+2NC)
Shunt release y y y
Under voltage release y y y
Trip alarm contacts y y y
Earth fault module y y y
Potary operating mechanism y y y
As per standard lS 13947-2 / lEC 60947-2
TECHNICAL DATA - DG
Type Designation DG 125 DG 200 DG 250 DG 400
Pated Uninterrupted current
at 40
o
C. - lth (AC/DC) A 125 200 250 400
Pated impulse withstand voltage - Uimp kv 8 8 8 8
Pated operational voltage - Ue v AC 415 415 415 415
v DC 250 250 250 250
Frequency Hz 50/60 50/60 50/60 50/60
Pated insulation voltage - Ui v 690 690 690 690
Operating Temperature C -5 to +55 -5 to +55 -5 to +55 -5 to +55
Overvoltage category / pollution degree lll/3 lll/3 lll/3 lll/3
Pated ultimate S.C. breaking capacity - lcu
at 415v ac kA 10 16 25 25
Pated Service S.C. breaking capacity - lcs
at 415v ac kA 75% 75% 75% 75%
Utilisation category A A A A
Mechanical life
Electrical life
Pelease Type Thermal-Magnetic Thermal-Magnetic Thermal-Magnetic Thermal-Magnetic
Overload release setting 80-100% 80-100% 80-100% 80-100%
Short Circuit release setting (+/- 20%) 4*ln 4*ln 4*ln 4*ln
Weight kg 1.8 2.4 5 5
Terminal capacity Cables mm
2
70 150 300 300
Links mm 22 30 40 40
Accessories
Auxiliary contacts (1NO+1NC) (1NO+1NC) (2NO+2NC) (2NO+2NC)
Shunt release y y y y
Under voltage release y y y y
Trip alarm contacts y y y y
Earth fault module y y y y
Potary operating mechanism y y y y
As per standard lS 13947-2 / lEC 60947-2
!
TECHNICAL DATA - DH
Type Designation DH 100 DH 125 DH 160 DH 200
Pated Uninterrupted current
at 40
o
C. - lth (AC/DC) A 100 125 160 200
Pated impulse withstand voltage - Uimp kv 8 8 8 8
Pated operational voltage - Ue v 415 415 415 415
v DC 250 250 250 250
Frequency Hz 50/60 50/60 50/60 50/60
Pated insulation voltage - Ui v 690 690 690 690
Operating Temperature C -5 to +55 -5 to +55 -5 to +55 -5 to +55
Overvoltage category / pollution degree lll/3 lll/3 lll/3 lll/3
Pated Short-circuit making capacity - lcm kA 52.5 73.5 73.5 73.5
Pated ultimate S.C. breaking capacity - lcu
at 660v ac kA 5 7 7 7
at 550v ac kA 12 18 18 18
at 500v ac kA 18 25 25 25
at 415v ac kA 25 35 35 35
at 380v ac kA 25 35 35 35
at 240v ac kA 50 60 60 60
Pated Service S.C. breaking capacity - lcs
at 415v ac kA 100% 75% 75% 50%
DC Breaking capacity at 250 v, L/P <= 15mS kA 10 10 10 10
Capacitor rating at 415 v, 50 Hz kvAP 35 50 70 70
Utilisation category A A A A
Mechanical life
Electrical life
Pelease Type Thermal-Magnetic Thermal-Magnetic Thermal-Magnetic Thermal-Magnetic
Overload release setting 80-100% 80-100% 80-100% 80-100%
Short Circuit release setting (+/- 20%) 9*ln 9*ln 8*ln 6*ln
Weight kg 1.7 1.7 1.7 2.4
Terminal capacity Cables mm
2
50 50 95 150
Links mm 16 16 22 30
Auxiliary contacts (1NO+1NC) (1NO+1NC) (1NO+1NC) (1NO+1NC)
Shunt release y y y y
Under voltage release y y y y
Trip alarm contacts y y y y
Earth fault module y y y y
Potary operating mechanism y y y y
As per standard lS 13947-2 / lEC 60947-2
"
TECHNICAL DATA - DH
Type Designation DH 250 DH 400 DH 630
Pated Uninterrupted current
at 40
o
C. - lth (AC/DC) A 250 400 630
Pated impulse withstand voltage - Uimp kv 8 8 8
Pated operational voltage - Ue v 415 415 415
v DC 250 250 250
Frequency Hz 50/60 50/60 50/60
Pated insulation voltage - Ui v 690 690 690
Operating Temperature C -5 to +55 -5 to +55 -5 to +55
Overvoltage category / pollution degree lll/3 lll/3 lll/3
Pated Short-circuit making capacity - lcm kA 73.5 73.5 73.5
Pated ultimate S.C. breaking capacity - lcu
at 660v ac kA 7 7 7
at 550v ac kA 18 18 18
at 500v ac kA 25 25 25
at 415v ac kA 35 35 35
at 380v ac kA 35 35 35
at 240v ac kA 60 60 60
Pated Service S.C. breaking capacity - lcs
at 415v ac kA 75% 75% 75%
DC Breaking capacity at 250 v, L/P <= 15mS kA 20 20 20
Capacitor rating at 415 v, 50 Hz kvAP 100 160 160
Utilisation category A A A
Mechanical life
Electrical life
Pelease Type Thermal-Magnetic Thermal-Magnetic Thermal-Magnetic
Overload release setting 80-100% 80-100% 80-100%
Short Circuit release setting (+/- 20%) 6*ln 6*ln 6*ln
Weight kg 5.5 5.5 6.5
Terminal capacity Cables mm
2
300 300 400
Links mm 40 40 2x40
Auxiliary contacts (2NO+2NC) (2NO+2NC) (2NO+2NC)
Shunt release y y y
Under voltage release y y y
Trip alarm contacts y y y
Earth fault module y y y
Potary operating mechanism y y y
As per standard lS 13947-2 / lEC 60947-2
#
TECHNICAL DATA - DL
Type Designation DL 100 DL 160 DL 250 DL 400
Pated Uninterrupted current
at 40
o
C. - lth (AC/DC) A 100 160 250 400
Pated impulse withstand voltage - Uimp kv 8 8 8 8
Pated operational voltage - Ue v 415 415 415 415
v DC 250 250 250
Frequency Hz 50/60 50/60 50/60 50/60
Pated insulation voltage - Ui v 690 690 690 690
Operating Temperature C -5 to +55 -5 to +55 -5 to +55 -5 to +55
Overvoltage category / pollution degree lll/3 lll/3 lll/3 lll/3
Pated Short-circuit making capacity - lcm kA 105 105 105 105
Pated ultimate S.C. breaking capacity - lcu
at 660v ac kA 10 10 10 10
at 550v ac kA 25 25 25 25
at 500v ac kA 35 35 35 35
at 415v ac kA 50 50 50 50
at 380v ac kA 50 50 50 50
at 240v ac kA 65 50 65 65
Pated Service S.C. breaking capacity - lcs
at 415v ac kA 100% 100% 100% 100%
DC Breaking capacity at 250 v, L/P <= 15mS kA 20 25 25 25
Capacitor rating at 415 v, 50 Hz kvAP 50 70 100 160
Utilisation category A A A A
Mechanical life Ops.
Electrical life
Pelease Type Thermal-Magnetic Thermal-Magnetic Thermal-Magnetic Thermal-Magnetic
Overload release setting 80-100% 80-100% 80-100% 80-100%
Short Circuit release setting (+/- 20%) 9*ln 8*ln 6 ln 6 ln
Weight kg 1.7 1.8 5 5
Terminal capacity Cables mm
2
50 95 300 300
Links mm 16 22 40 40
Accessories
Auxiliary contacts (1NO+1NC) (1NO+1NC) (2NO+2NC) (2NO+2NC)
Shunt release y y y y
Under voltage release y y y y
Trip alarm contacts y y y y
Earth fault module y y y y
Potary operating mechanism y y y y
As per standard lS 13947-2 / lEC 60947-2
$
TECHNICAL DATA - DM
Type Designation DM 16 DM 100 DM 160 DM 250 DM 400
Pated Uninterrupted current
at 40
o
C. - lth (AC/DC) A 16 70 160 250 400
Pated impulse withstand voltage - Uimp kv 8 8 8 8 8
Pated operational voltage - Ue v 415 415 415 415 415
Frequency Hz 50/60 50/60 50/60 50/60 50/60
Pated insulation voltage - Ui v 690 690 690 690 690
Operating Temperature C -5 to +55 -5 to +55 -5 to +55 -5 to +55 -5 to +55
Overvoltage category / pollution degree lll/3 lll/3 lll/3 lll/3 lll/3
Pated Short-circuit making capacity - lcm kA 105 105 105 105 105
Pated ultimate S.C. breaking capacity - lcu
at 660v ac kA 10 10 10 10 10
at 550v ac kA 25 25 25 25 25
at 500v ac kA 35 35 35 35 35
at 415v ac kA 50 50 50 50 50
at 380v ac kA 50 50 50 50 50
at 240v ac kA 85 85 85 85 85
Pated Service S.C.
breaking capacity - lcs at 415v ac kA 100% 100% 100% 100% 100%
Utilisation category A A A A A
Mechanical life
Electrical life
Pelease Type Magnetic Magnetic Magnetic Magnetic Magnetic
Short Circuit release setting (+/- 20%) 12*ln 12*ln 12*ln 12*ln 12*ln
Weight kg 1 1.65 4.8 5.5 5.5
Terminal capacity Cables mm
2
10 50 185 300 300
Links mm - 16 36 40 40
Accessories
Auxiliary contacts 1 NO + 1 NC 1 NO + 1 NC 1 NO + 1 NC 2 NO + 2 NC 2 NO + 2 NC
Shunt release y y y y y
Under voltage release y y y y
Trip alarm contacts y y y y y
Potary operating mechanism y y y y y
As per standard lS 13947-2 / lEC 60947-2
"
TECHNICAL DATA - DF
Type Designation DF
Pated Uninterrupted current
at 40
o
C. - lth (AC/DC) A 1
Pated impulse withstand voltage - Uimp kv 8
Pated operational voltage - Ue v 415
Frequency Hz 50/60
Pated insulation voltage - Ui v 600
Operating Temperature C -5 to +55
Overvoltage category / pollution degree lll/3
Pated ultimate S.C. breaking capacity - lcu
at 415v ac kA 50
Magnetic Threshold A 2
Mechanical life Ops. 10000
Electrical life Ops. 6000
Overload release setting (Fixed) A 1
Weight kg 0.65
Terminal capacity Without lugs mm
2
4
With lugs mm
2
16
Accessories
Auxiliary contact 1 CO, 5A-250v
Shunt release y
Auxiliary contact y
Trip alarm contacts y
$
OVERALL DIMENSIONS
MCCB - TYPE DS
Note: All dimensions are in mm.
DS 100 DS 125/160/200
DS 250/400
MOUNTlNG AND
DOOP CUTOUT DETAlLS
MOUNTlNG AND
DOOP CUTOUT DETAlLS
MOUNTlNG AND
DOOP CUTOUT DETAlLS
#%
OVERALL DIMENSIONS
DIMENSIONAL DETAILS OF ROTARY OPERATING MECHANISM - TYPE DS
Note: All dimensions are in mm.
DS 100/125/160/200
DS 250/400
#&
OVERALL DIMENSIONS
MCCB - TYPE DTH..E
Note: All dimensions are in mm.
ROTARY OPERATING MECHANISM FOR TYPE DTH..E
DTH 200E DTH 250/400/630/800 E
DTH 200E DTH 250/400/630/800 E
MOUNTlNG AND
DOOP CUTOUT DETAlLS
#'
OVERALL DIMENSIONS
MCCB - TYPE DG
Note: All dimensions are in mm.
DG 125/200
DG 250/400
MOUNTlNG AND
DOOP CUTOUT DETAlLS
MOUNTlNG AND
DOOP CUTOUT DETAlLS
$
OVERALL DIMENSIONS
DIMENSIONAL DETAILS OF ROTARY OPERATING MECHANISM - TYPE DG
Note: All dimensions are in mm.
DG 125/200
DG 250/400
EXPLODED VIEW OF ROTARY OPERATING MECHANISM
$
OVERALL DIMENSIONS
MCCB - TYPE DH
Note: All dimensions are in mm.
MOUNTlNG AND
DOOP CUTOUT DETAlLS
DH 100 DH 125/160 DH 200
MOUNTlNG AND
DOOP CUTOUT DETAlLS
MOUNTlNG AND
DOOP CUTOUT DETAlLS
MOUNTlNG AND
DOOP CUTOUT DETAlLS
DH 250 DH 400 DH 630
$
OVERALL DIMENSIONS
DIMENSIONAL DETAILS OF ROTARY OPERATING MECHANISM - TYPE DH
Note: All dimensions are in mm.
DH 100/125/160/200
DH 250/400
DH 630
$!
OVERALL DIMENSIONS
MCCB - TYPE DL
Note: All dimensions are in mm.
DL 100 DL 160/200
DL 250/400
$"
OVERALL DIMENSIONS
DIMENSIONAL DETAILS OF ROTARY OPERATING MECHANISM - TYPE DL
Note: All dimensions are in mm.
DL 100 DL 160
DL 250/400
$#
OVERALL DIMENSIONS
MCCB - TYPE DTH
Note: All dimensions are in mm.
DTH 100 3 POLE / 4 POLE DTH 200
DTH 250/400/630.800
MOUNTlNG AND
DOOP CUTOUT DETAlLS
$$
OVERALL DIMENSIONS
ROTARY OPERATING MECHANISM FOR TYPE DTH
Note: All dimensions are in mm.
DTH 200
DTH 250/400/630/800
DTH 100
PANEL CUT OUT
$%
OVERALL DIMENSIONS
DX 100-250 S/H ... 3/4 POLE
Note: All dimensions are in mm.
POTAPY DPlvE / POTAPY HANDLE FOP SUPFACE MOUNTlNG BPEAKEPS
$&
OVERALL DIMENSIONS
DX 100-250 S/H... 3/4 POLE
Note: All dimensions are in mm.
EXTENSlON SHAFT
DOOP COUPLlNG POTAPY HANDLE FOP PEAP MOUNTlNG SWlTCHES
PEMOTE OPEPATOP
$'
OVERALL DIMENSIONS
DX 160 S/H, DX 200-250 S/H
Note: All dimensions are in mm.
PLUG-lN ADAPTEP
%
OVERALL DIMENSIONS
DX 400-630 S/H (3/4 POLE)
Note: All dimensions are in mm.
DIMENSIONAL DETAILS OF ROTARY OPERATING MECHANISM
DOOP COUPLlNG POTAPY HANDLE
POTAPY DPlvE
%
OVERALL DIMENSIONS
DX 400-630 S/H ... 3/4 POLE
Note: All dimensions are in mm.
PEMOTE OPEPATOP
WlTHDPAWABLE UNlT
PUSH-BUTTONS FOP PEMOTE OPEPATlON ENCLOSED BPEAKEPS
%
OVERALL DIMENSIONS
DX 800-1250 H ... 3/4 POLE
Note: All dimensions are in mm.
DX 1600 H ... 3/4 POLE
%!
OVERALL DIMENSIONS
DX...H 800-1600 A (3/4 POLE)
Note: All dimensions are in mm.
MOUNTlNG BPACKETS PEAP CONNECTlON
%"
OVERALL DIMENSIONS
DX 800-1600 H ... 3/4 POLE
Note: All dimensions are in mm.
PEMOTE OPEPATOP
POTAPY DPlvE
DOOP COUPLlNG POTAPY HANDLE
%#
OVERALL DIMENSIONS
DX 800-1600 H ... 3/4 POLE
Note: All dimensions are in mm.
WlTHDPAWABLE UNlT
%$
OVERALL DIMENSIONS
MCCB - TYPE DM
Note: All dimensions are in mm.
DM 16 DM 100
DM 160 DM 250/400
MOUNTlNG AND
DOOP CUTOUT
DETAlLS
MOUNTlNG AND
DOOP CUTOUT DETAlLS
MOUNTlNG AND
DOOP CUTOUT DETAlLS
MOUNTlNG AND
DOOP CUTOUT DETAlLS
%%
OVERALL DIMENSIONS
ROTARY OPERATING MECHANISM FOR MOTOR BACK-UP PROTECTION RANGE FOR TYPE DM
Note: All dimensions are in mm.
DM 16 DM 100
DM 160 DM 250/400
%&
OVERALL DIMENSIONS
MCCB - TYPE DTH 800 INST.
Note: All dimensions are in mm.
ROTARY OPERATING MECHANISM FOR DTH 800 INST.
%'
OVERALL DIMENSIONS
EARTH FAULT MODULES - GF1, GF2, GF11
Note: All dimensions are in mm.
GF1 GF2
GF11
&
WIRING DIAGRAM
EARTH FAULT MODULES - GF1, GF2, GF11
GF1 & GF2
GF11
&
OVERALL DIMENSIONS
SS ENCLOSURE
Note: All dimensions are in mm.