This document provides instructions for an assignment involving testing a circuit using two MOSFETs (M1 and M2) with different voltages and timing parameters. M1 will be tested at 15V with a 5V DC voltage for 0.1 microseconds, then M2 will be tested at 0V for 0.1 microseconds with a starting value of 0 and opposing value of 1.
This document provides instructions for an assignment involving testing a circuit using two MOSFETs (M1 and M2) with different voltages and timing parameters. M1 will be tested at 15V with a 5V DC voltage for 0.1 microseconds, then M2 will be tested at 0V for 0.1 microseconds with a starting value of 0 and opposing value of 1.
Copyright:
Attribution Non-Commercial (BY-NC)
Available Formats
Download as DOCX, PDF, TXT or read online from Scribd
This document provides instructions for an assignment involving testing a circuit using two MOSFETs (M1 and M2) with different voltages and timing parameters. M1 will be tested at 15V with a 5V DC voltage for 0.1 microseconds, then M2 will be tested at 0V for 0.1 microseconds with a starting value of 0 and opposing value of 1.
Copyright:
Attribution Non-Commercial (BY-NC)
Available Formats
Download as DOCX, PDF, TXT or read online from Scribd