Bios Alex New

You might also like

Download as ppt, pdf, or txt
Download as ppt, pdf, or txt
You are on page 1of 32

BIOS ALEX PLUS YAG

4 Systems in 1

Features

Bios Alex plus YAG


The most innovative complete and versatile laser device on the market combining:
1.Alexandrite long pulse (HR II & III) 2.Nd:YAG long pulse (HR V & VI, VL)

3.Nd:YAG short pulse (SR)


4.Alexandrite + Nd:YAG blended (HR III V)

Features

Introduction to blended mode


The laser beam can be made by a mix of finely adjustable portions of these 2 wavelengths Use of the same fiber and same handpiece for all the emission modes More calibrated energy in a proportion that patients can better tolerate

Features

Introduction to blended mode


Skin is different between people and body parts at different times of the year 2 laser sources including the blended mode and the short pulse Nd:YAG allow to expand the patients base Solves the problems of having a range of patients with different skin of color

Features

Alexandrite long pulse


755nm corresponds to the highest melanin absorption in the spectrum 1064nm corresponds to a lower level of melanin absorption At 1064nm better hemoglobin and water absorption

Features

Alexandrite long pulse


Ideal for hair removal on light phototypes; potential side effects in darker skinned patients One of the most powerful on the market: 27 J/cm2 on 14 mm spot size Fast: up to 2 Hz at the maximum power of 45J

Features

Alexandrite long pulse


Safe with the new burst mode to deliver much more gently the energy to the tissues: - up to 5 pulses - total pulse width from 0,5 up to 120 ms

Skin has much more time to dissipate the heat coming from the interaction laser/epidermis melanin

Features

Nd: YAG long pulse


1.064nm corresponds to a lower melanin absorption, in comparison with Alexandrite, but guarantees the best penetration of the beam Ideal for hair removal where there is a huge contrast between the color of the hairs and the color of the skin: dark phototypes (V & VI) Very low superficial absorption

Features

Nd: YAG long pulse


1.064nm is the best wavelength even for the treatment of vascular lesions: face teleangectasias blue and red leg veins spider veins spider naevi haemangioma

Features

Nd: YAG long pulse


One of the most powerful on the market: 27 J/cm2 on 14 mm spot size Fast: up to 2 Hz at the maximum power of 45J

1.064 nm long pulse allows to even treat warts and onychomycosis

Features

Nd:YAG short pulse


1.064nm emitting in microseconds is used for skin tightening (remodeling, skin texture) The laser beam causes micro lesions at 500 micron depth and stimulate new collagen production (thermal injury to the dermis that starts a wound-healing response) The result is a non-ablative skin resurfacing reducing also the possible preexisting erythema

Features

Nd:YAG short pulse


Ideal for pigmented lesions with spot sizes smaller than the size of the lesion itself No chances to affect and damage the surrounding sane skin Gradual lightening of hyperpigmentations, melasma and dark spots

Features

Nd:YAG short pulse


Treatments are well tolerated by all the patients, with minimal discomfort Fast: up to 7Hz

Safe: temporary side effects like small erythema have been observed

Features

Blended Mode (Alex + Nd:YAG)


Alex & Nd:YAG emitted at the same time, from the same fiber and the same handpiece Deliver more energy safely, efficiently and effectively, calibrating the thermal energy according to the skin type Higher tolerability of the treatments due to the tailored treatments

Features

Blended Mode (Alex + Nd:YAG)


The best solution for hair removal and blood vessels treatments Effective on dark skin types and on fine and light hairs: less aggressive and no micronization of the hair bulbs Lighter or thinner hairs on skin of color can be treated by blending a little Alexandrite to Nd:YAG

Features

Blended Mode (Alex + Nd:YAG)


The parameters are finely adjustable for both the lasers: fluence and pulse width It is possible to change the order of delivery and the percentage of energy in order to be less aggressive and effective at the same time

Features

Blended Mode (Alex + Nd:YAG)


For vascular lesions, the mix allows to target structures of different sizes at different depths The 755 nm alexandrite laser converts oxy-hemoglobin to methemoglobin There is an absorption increase of the 1064 nm Nd:YAG wavelength by 300% to 500% for better and safer results

Features

Blended Mode (Alex + Nd:YAG)


Methemoglobin is a form of the oxygen-carrying metalloprotein hemoglobin, in which the iron in the heme group is in the Fe3+ (ferric) state, not the Fe2+ (ferrous) of normal hemoglobin. Methemoglobin cannot release bound oxygen, unlike oxyhemoglobin. It is a bluish chocolate-brown in color. In human blood a trace amount of methemoglobin is normally produced spontaneously.

Features

Blended Mode (Alex + Nd:YAG)


The optional integrated cooling system in the handpiece allows even much safer and more comfortable treatments Less and faster sessions with better results for even more patients It is possible to treat back in 30 minutes or legs in 30 to 45 minutes

Features

Biocooling air
The most performing skin cooling system able to blow cold air up to -50C! (Normal working temperature around 20C) There is also an adjustment for extra cooling, increasing the speed of delivery of cold air Adapter to integrated cold air hose to laser handpiece so to really cool down the treatment area

Features

Summary of the applications


Hair removal on all skin types, safe even on tanned patients Vascular lesions

Skin rejuvenation
Pigmented lesions

Before&After

Hair removal

>Before

>After

Before&After

Hair removal

>Before

>After

Before&After

Leg veins and vascular lesions

>Before

>After

Before&After

Skin Rejuvenation

>Before

>After

Before&After

Skin Rejuvenation

>Before

>After

Before&After

Skin Rejuvenation

>Before

>After

Before&After

Skin Rejuvenation

>Before

>After

Before&After

Pigmented lesions

>Before

>After 1 session

>After 2 session

Features

Main Specification
Alexandrite power: 42 J Nd:YAG power: 55 J Pulse repetition rate: up to 7 Hz with short pulse mode Pulse duration: up to 200 ms Spot size: up to 18 mm Blended Alexandrite and Nd:YAG

Protocols

Wavelength (nm)

Frequency (Hz)

Fluence (J/cm2)

Note

VASCULAR

1064 long

1 1.5

100 240

Reduce pulses and fluence for small vessels and sensitive zones

REJUVENATION

1064 short

47

14 22

Skin tightening with cooling

PIGMENTED LESIONS

755 long

15 25

Benign lesions

HAIR REMOVAL

1064 long and 755 long blended

12

25 - 75

Different hair and skin types

Bios S.r.l. Via Guido Rossa 10/12 - 20090 Vimodrone (MI) - Italy Tel. +39.02.27304275 - Fax +39.02.27304276 info@biositalia.it - www.biosgroup.eu

You might also like