Professional Documents
Culture Documents
Questions
Questions
Old to New Aggregate mix ratio? 3. Which shatters on impact? 4. Density unit? 5. kerbs stormer use to measure? 6. Flow viscosity unit? 7. Dynamic viscosity unit? 8. Kinematic viscosity unit? 9. You observe that the foreman doing the wrong Coating system in site, what is your course of action? 10. You observe that the foreman reusing the used aggregates for blasting, what is your course of action? 11. In density cup, how you measure density? 12. What colour should the flame be at the flash point? 13. In whirling hygrometer two consecutive spins readings should be within? 14. Abel Cup used to measure? 15. Material of SG Cup? 16. standard laboratory temperature for viscosity measurement? 17. Give a reason for performing a viscosity test on site? 18. Why density cup is used? 19. When using a flow cup which unit of viscosity would be used? 20. On pipes, comb gauges are placed? 21. Code of practice for safety during blast cleaning operations? 22. Dolly test used to measure? 23. Standard for maintenance painting at works and site for above ground pipe line & plant installation? 24. Paint should be normally applied when the RH in the work zone is? 25. Cleaning method if found contamination on working surface? 26. Which gauge works by measuring the change in magnetic flux between two magnetic poles? 27. Which Painting system is followed for GRP surface? 28. In corrosion circuit, initially Iron changes from? 29. Paint overlapping distance for repair areas? 30. Definition of Sa1? 31. Definition of Sa4 ? 32. Definition of St1 ? 33. Definition of St2 ? 34. In Above CPVC, Gloss will be? 35. In practical photos defects came like Blistering, Bittiness,Corrosion due to low DFT, Delamination, Pinholes, Sagging, Cracking.
REGARDS,