Professional Documents
Culture Documents
CRS Sample
CRS Sample
Sr. No.
Dwg / Doc No
Rev
Comment From PEC (21-Sep-13) Page no 4 Specify condition check YES / NO (.006>1 NO)
CPE/DC/BX48/420-VE-4265
Page no 6 Spelling mistake Adequate, Hollow cylinder Page no. 9 No value (#REF)
CPE - 34108
"View from R" CS Plate details for lifting lug. "Detail of A" Fixing detail for Top channel and cover plate Page no 4 Specify condition check YES / NO (.006>1 NO)
CPE/DC/BX48/470-VE-4765
Page no 6 Spelling mistake Adequate, Hollow cylinder Page no. 9 No value (#REF)
4 5 6 7
5 2 5 2
"View from R" CS Plate details for lifting lug "Detail of A" Fixing detail for Top channel; and cover plate Page no 4 Specify condition check YES / NO (1.811>1 YES) "Section X-X" Dim. not matching with design calculation. Radial width shown in drawing is 150 whereas in calc. it is 200 Page no 4 Specify condition check YES / NO (1.811>1 YES)
Sr. No. 8 9 10 11 12
Dwg / Doc No CPE - 34114 CPE/DC/BX48/460-VE-4629 CPE - 34110 CPE/DC/BX46/470-RA4710/4720 CPE 40873
Rev 5 2 5 3 5
Comment From PEC (21-Sep-13) "Section X-X" Not matching with design calculation. Radial width shown in drawing is 150 whereas in calc. it is 200 Shell stiffening design check is not included. "Section X-X" Not matching with design calculation. Radial width shown in drawing is 140 whereas in calc. it is 200 Page no. 16 Check the Tags (Gusset & Baffle) "View from B" 80x60x12 thk stiffening shall be provided on opposite side also Agitator nozzle N10 detail shall be furnished
13
CPE 40874
"View from B" 80x60x12 thk stiffening shall be provided on opposite side also Agitator nozzle N10 detail shall be furnished
14
2 2 5 2 4 2
No comments No comments "Section X-X" Dimensions are not matching with calc. Please check. Radial width shown in drawing is 150 whereas in calc. it is 200. Thickness also marked as 8 instead of 10. No comments "Section X-X" Dimensions are not matching with calc. Please check. Radial width shown in drawing is 150 whereas in calc. it is 200. Thickness also marked as 8 instead of 10. No comments
15
16
Sr. No.
Rev 4 2 5 2 5
Comment From PEC (21-Sep-13) "Section X-X" Dimensions are not matching with calc. Please check. Radial width shown in drawing is 150 whereas in calc. it is 200. Thickness also marked as 8 instead of 10. No comments "Section X-X" Not matching with design calculation. Radial width shown in drawing is 140 whereas in calc. it is 200 No comments "Section X-X" Not matching with design calculation. Radial width shown in drawing is 140 whereas in calc. it is 200. Ht mentioned in calc as 150 whereas in dwg it is 110
17
18
19
CPE 34111