Professional Documents
Culture Documents
i3PROJECTOR Wi Plus Touch Manual
i3PROJECTOR Wi Plus Touch Manual
i3PROJECTOR Wi Plus Touch Manual
1. Driver installation
A CD drive is created by connecting the projector to a computer through a USB cable. You may enter the CD drive and execute TouchDriver.exe program to install TouchDriver.
2. Mask setting.
Please execute Mask Setting.
4. Calibration
Please select Manual mode to execute the calibration procedure.
Acceptable
Acceptable
White Board
White Board
White Board
Good or Acceptable
Halo examples
Adjustment Steps: 1. Attach alignment bars 2. Press LASER SWITCH once. 3. Screw adjustment order R1, until bar R1 is clear R3, until bar R3 is clear R2, until bar R2 is clear Fine-tune adjustment if necessary
Adjustment Steps: 1. Attach alignment bars 2. Press LASER SWITCH once 3. Screw adjustment order L1, until bar L1 is clear L3, until bar L3 is clear L2, until bar L2 is clear Fine-tune adjustment if necessary 4. Press LASER SWITCH once again
BELGIUM-LUXEMBOURG
Nijverheidslaan 60 8540 Deerlijk Belgium T +32 (0)56 313 415 F +32 (0)56 313 688
NETHERLANDS
Duwboot 91 3991 CG Houten Netherlands T +31 (0)30 6379387 F +31 (0)30 2547927
FRANCE
Parc dactivits de la Valle de lEscaut Waka 1, n 9 59264 Onnaing France T +33 (0)3 27 45 60 60 F +33 (0)3 27 45 60 70
USA
549 Ionia Ave. SW Grand Rapids, MI 49503 USA T +616-451-7800 F +616-451-9698
GERMANY
Lohrheidestrae 72 44866 Bochum Germany T +49 (0) 2327 960 50-0 F +49 (0) 2327 960 50-50
SCANDINAVIA
Lollandsvej 16 5500 Middelfart Danmark T +45 64 41 04 90 F +45 64 41 17 47
AUTHORISED RESELLER
WWW.I3-LEARNING.COM INFO@I3-LEARNING.COM