Professional Documents
Culture Documents
Owners Manual Axon Epicon Raidon Air Series
Owners Manual Axon Epicon Raidon Air Series
OWNERS MANUAL TABLE OF CONTENTS.................................................................................................................. 1 INTENDED USE ............................................................................................................................ 1 IMPORTANT SAFETY INFORMATION......................................................................................... 4 BEFORE EACH RIDE! . .................................................................................................................. 5 FORK INSTALLATION................................................................................................................... 5 INSTALLATION INSTRUCTIONS.................................................................................................. 6 TIRE CLEARANCE ! . ..................................................................................................................... 6 REMOTE LOCK LEVER INSTALLATION.......................................................................................... AXON SERIES . ................................................................................................................................................................7 EPICON SERIES................................................................................................................................................................7 RAIDON RLD SERIES ....................................................................................................................................................7 REMOTE LOCK LEVER INSTALLATION RAIDONair RL SERIES.................................................. 9 REMOTE TRAVEL ADJUST LEVER EPICON XC TAD / XC TAD 15QLC..................................... 10 LOCK-OUT SYSTEMS................................................................................................................. 11 REBOUND DAMPING ADJUST.................................................................................................. 12 REMOTE TRAVEL ADJUST FUNCTION EPICON XC TAD / XC TAD 15QL .............................................................................................................................12 QLOCK SYSTEM 15mm.............................................................................................................. 13 SETTING SAG.............................................................................................................................. 14 FORK MAINTENANCE................................................................................................................ 15 LIMITED WARRANTY................................................................................................................. 16
INTENDED USE
Category AXON EPICON RAIDON air Freeride All Mountain XC & Marathon DJ / Street
Make sure to select the correct fork according to your frames build in height and personal riding style. Please note that the AXON, EPICON and RAIDONair series forks were not designed for jumping, dropping, aggressive downhill riding, freeriding or urban style riding. Not following these instructions could result into a failure of the product, accident and even death of the rider. Not following these instructions will void the forks warranty!
English
MAX ROTOR DIAMETER [ mm ] AXON SERIES EPICON SERIES RAIDON air SERIES 185 185 185
Steerer Tube
A
Fork Crown
B
Stanchion Tubes
E
Bottom Case
C
2
Dropouts
D
4
3
English
Model AXON RLD / RLD 15QLC EPICON RLD / RLD 15QLC EPICON RL / RL QLC15 EPICON LOD / LOD QLC15 EPICON XC TAD EPICON XC TAD 15QLC EPICON RLD 15QLC 29 EPICON LOD 15QLC 29 RAIDON RLD 15QLC air RAIDON LOD 15QLC air RAIDON RLD air RAIDON LOD air RAIDON LO air RAIDON RLD 15QLC 29 air RAIDON LOD 15QLC 29 air
Air Valve 2 2 2 2 4 4 2 2 2 2 2 2 2 2 2
English
WARNING !
Failure to comply with the given warnings and instructions may cause damage to the product, injuries or even death to the rider.
Be sure to read this manual carefully before using your suspension fork. Inappropriate usage of your suspension fork may cause damage to the product, serious injuries or even death to the rider. Suspension forks contain fluids and gases under extreme pressure, warnings included in this manual must be followed in order to reduce the possibility of injuries or possible death. Never try to open any SR SUNTOUR cartridge, as stated above they contain fluids and gases under high pressure. Opening any SR SUNTOUR cartrigde implies the risk of getting seriously injured. Only use genuine SR SUNTOUR parts. The use of aftermarket replacement and spare parts voids the warranty of your fork and might cause failure to the fork. This could result into an accident, injury or even death. SR Suntour suspension forks are designed for the usage by a single rider.
This instruction sheet contains important information about the correct installation, service and maintenance of your suspension fork. Nevertheless please be informed that special knowledge and tools are essential to install, service and maintain SR SUNTOUR forks. Common mechanical knowledge may not be sufficient to repair, service or maintain a suspension fork. Therefore we strongly recommend getting your fork installed, serviced and/or maintained by a trained and qualified bicycle mechanic. Improper installation, service or maintenance can result in failure of the product, accident, injury or even death. Always be equipped with proper safety gear. This includes a properly fitted and fastened helmet. According to your riding style you should use additional safety protection. Make sure your equipment is in flawless condition. Make sure to select the correct fork according to your frames built in height and your personal riding style. Installing a fork which does not match the geometry of your frame could result into a failure of the fork itself and will void the forks warranty. Installing a suspension fork will change the geometry and handling of your bike. Learn how to ride and train your skills. Know your limits and never ride beyond those. When using a bike carrier please always fully release the quick release fastener. Not properly unfastened quick releases may result into bending, breaking or other structural damage while removing your bike of the bike carrier. If your bike fell off the carrier please do not ride it, until it has been inspected by a qualified bike mechanic. When using a bike carrier which just secures the bike by clamping the forks dropouts, make sure to fasten your rear wheel as well. A not accurate fastened rear wheel could allow the bike to jiggle which might result into a breakage of the dropouts. Please note that SR SUNTOUR suspension forks do not come with the proper reflectors for on road riding. If you intend to ride on public roads or bicycle lanes your dealer should mount the required reflectors to your fork.
u a
i t
n o
Study all other owners manuals provided with your bike and make yourself familiar with the components mounted to your bike.
English
Do not ride your bike, if one of the following test criteria cant be passed! Riding your bike without eliminating any defect or carrying out the necessary adjustments can result into an accident, fatal injury or even death.
Do you notice any cracks, dents, bent or tarnished parts at your suspension fork or any other part of your bicycle? If so, please consult a trained and qualified bicycle mechanic to check your fork or bike. Can you notice any oil leaking out your fork? Also check out hidden areas like the bottom side of your fork crown. If so, please consult a trained and qualified bicycle mechanic to check your fork or bike. Compress your fork with your body weight. If it feels too soft, relating to the proper pressure to achieve an accurate SAG, inflate it until you have reached the required value. Please also refer to chapter SETTING SAG Make sure your brakes are properly installed/ adjusted and work appropriate. This also applies to every other part of your bike like handlebars, pedals, crank arms, seat post, saddle etc. Also refer to the owners manuals provided by all other component manufacturers. Make sure your wheels are centered perfectly in order to avoid any contact with your suspension fork or brake system. If you are using a quick release system to fasten your wheel set, make sure that all levers and nuts are adjusted properly. In case you are using a through axle system, make sure that all fixing bolts are tightened with the appropriate torque values. Check the cable length and routing of your components. Make sure they do not interfere your steering actions. If you are using reflectors for on-road cycling, make sure they are clean and properly installed. Bounce your bike slightly on the ground while looking and listening for anything which might be loose.
English
All fixing bolts have to be tightened with the proper fasting torque stated by the manufacturers Remove the existing fork from your bicycle. Afterwards remove the crown race from the fork. Measure the length of your old forks steerer tube against the length of the SR SUNTOUR fork steerer. SR SUNTOUR suspension forks are delivered with a standard steerer tube length of 255mm. Therefore the steerer tube may need cutting to the proper length. In order to define the proper length of your steerer tube you can apply the following formula:
Frames head tube+Head sets stack height+Spacers+Stems clamp height-3mm clearance Warning! If your SR SUNTOUR fork does come with a threadless steerer tube, do not add a thread to it. SR SUNTOURS fork steeres are a one time press fit which can not be removed. Do not try to replace the steerer tube by a steerer tube with a threaded steerer. This will void the warranty of your fork and result into a failure of the product or could cause fatal injuries or even death to the rider. 4. Install the headset crown race (30mm for 1 1/8) firmly against the top of your fork crown. Install the fork unit (headset,spacers,stem) back on the bike. Adjust the headset until you do not feel play anymore. Also refer to the headsets manufacturer installation instructions. Install the brakes according to the manufacturers instructions. Make sure to adjust the brake pads properly. If you use a disc brake, only mount your brake to the original disc brake mounting holes. Only use cantilever brakes which are intended to be used with a hangerless brace. Check the installation instructions of your brake manufacturer and follow them. Make sure you choose the correct length of the brake cable in order to not interfere the performance of the fork. Re-install the wheel back on to your bike. If you are using a quick release system to fasten your wheel set, make sure that all fasteners and nuts are adjusted properly (four or more threads have to be engaged in the nut when it is closed) In case your fork comes with a through axle system, make sure that all fixing bolts are tightened with the appropriate torque values. Please also refer to the Qloc section of this manual.
5.
6.
TIRE CLEARANCE !
Your SR SUNTOUR suspension fork is designed to be used with 26 tires. Each tire has a different outer diameter (tire width and height). Therefore the clearance between your tire and fork needs to be checked, to make sure your tire does not get in contact with any part of your fork. Keep in mind that the narrowest part of your fork is located at the brake bosses. If you want to remove your wheel, you might have to deflate your tire, in order to be able to pass it through your brake bosses. 6
English
Note! Using a tire which exceeds the maximum tire size suitable to your fork is very dangerous and could cause an accident, fatal injuries or even death to the rider 1. 2. 3. 4. Release all air of your fork Compress your fork completely Measure the distance between the top of your tire and the bottom of the crown. Make sure the gap is not less than 10mm! Exceeding maximum tires size will cause the tire to jam against the bottom of the crown when the fork is fully compressed. Inflate the fork again
Keep in mind that if you are using a mudguard the clearance is limited! Repeat the Tire Clearance Test again to make sure the gap is big enough. Every time you are going to change your tires you have to repeat the test again!
3mm 1.5 Nm
Take off the plastic cover cap using a 2.5mm Allen key. 2.5mm
Unscrew the cable fixing bolt using a 2mm Allen key. 2.0mm 7
English
2mm 0.5 Nm
Cut the cable to a proper length to make sure it will still fit into the sliding carriage. CUT 7mm This pictures shows the remote lock unit in the OPEN position. The cable is cut perfectly, still fits into the sliding carriage.
Reassemble the plastic cover cap using a 2.5mm Allen key. Tighten it slightly. 2.5mm 0.5 Nm
If the fork does not lock, the tension of the cable is probably too low. In this case you have to increase the tension of the cable by turning the adjustment barrel counterclockwise. If the cables tension is too high and the fork does not unlock, you have to turn the adjust barrel clockwise. 8
TURN
Adjustment Barrel
English
See
Pi
on & e Ax r u t c
TAKE OFF
Unscrew the cable fixing bolt using a 1.5mm Allen key. 1.5mm
Thread the cable through the outer casing stopper and through the cover unit hole. Tension the cable slightly and tighten it using a 1.5mm Allen key.
1.5mm 0.5 Nm
CLIP ON
9
English
If the fork does not lock, the tension of the cable is probably too low. In this case you have to increase the tension of the cable by turning the adjustment barrel counterclockwise. If the cables tension is too high and the fork does not unlock, you have to turn the adjust barrel clockwise.
TURN
Adjustment Barrel
Adjustment Barrel
1.5mm 0.5 Nm
Thread the cable through the outer casing stopper and through the cable clamp. Tension the cable slightly and fasten it using a 2 mm Allen key 10
1.5mm 0.5 Nm
English
LOCK-OUT SYSTEMS
The Lock-Out function of SR SUNTOUR forks is intended to reduce teetering during rides out of saddle or uphill riding. The forks will not be locked 100%. A few millimeters of travel will remain, according to our Anti-Blow-Off-System. This system will protect you in case you have forgotten to unlock the fork while riding in rough terrain. Nevertheless, you should never set your fork to the Lock-Out-Mode while riding in rough terrain, going down hill or jumping. This implies the risk that the fork will get damaged when its being compressed under high load. This could also result into an accident, injuries or even death of the rider. ALL EPICON LOD & LO MODELS ALL RAIDON air LOD & LO MODELS In order to unlock your fork you have to turn the Speed Lock Out knob 90 counter-clockwise.
90
ALL AXON RLD & RL MODELS ALL EPICON RLD & RL MODELS ALL RAIDONair RLD & RL MODELS In order to lock your fork you have to push the Remote-Lock-Lever towards your handlebar. For unlocking you have to press the blue release button.
11
English
The rebound function of SR SUNTOUR hydraulic suspension forks allows you to tune your fork according to your personal preferences and the terrain you are riding on. This function enables you to control the speed of your forks rebound after its being compressed. If you are going to ride on a terrain with a lot of small and fast bumps, we recommend to increase your forks rebound speed. Otherwise it implies the risk that your front wheel loses its contact to the ground. If you are going to ride on a terrain with a lot of big and slow bumps, we recommend to decrease your forks rebound speed. ALL AXON RLD MODELS ALL EPICON RLD / EPICON LOD MODELS ALL RAIDONair RLD / LOD MODELS In order to increase the rebound speed of your fork you have to turn the adjuster knob counter clock-wise. To decrease the speed you have to turn it clockwise.
TURN
Adjuster Knob
The travel adjust function of your fork enables you to change the travel of your fork in a range of 40mm. SR SUNTOURs travel adjust works stageless, therefore you can choose every travel inbetween your forks maximum and minimum travel. The travel adjust cartrige itself works with an pneumatic system. While changing the travel air will get transferred from one chamber to the other. Usually the air valve(air pressure adjust) is located at the right side of the forks crown. Because of the travel adjust system, the air valve cap sits at the lower end of your bottom case.
Press
Compress Fork
12
Press the Travel Adjust Lever downwards and hold it. Compress your fork. Release the lever again. Disburden your fork.
English
ALL AXON 15QLC MODELS ALL EPICON 15QLC MODELS ALL RAIDON 15QLC MODELS
Adjust until finding the proper tightening torque for closing the QR lever.
P RE
SS
SS
P RE
1. SLIDE IN
2. ADJUST
CLICK!
4. CLOSED
3. CLOSE
1. CLOSED
CLOSE
OP
EN
2. OPEN
3. PRESS + PUSH
SS
PRE
SS
4. PULL OUT
P RE
13
English
Non-Recommend Shape Limited Function Edges within the hub can cause the axle to get stuck
SETTING SAG
The SAG is the compression which is just caused by the body weight and seating position of the rider and not as a result of riding. Every rider has a different weight and seating position, therefore the fork will sag more or less. To assure a proper function of your fork and not to interfere the performance of it, setting a proper SAG is the only way to find the right air pressur for your fork. Travel 80mm 100mm 120mm 140mm SAG in % 15% - 20% 15% - 20% 15% - 20% 20% - 25% SAG in mm 12mm - 16mm 15mm - 20mm 18mm - 24mm 28mm- 35mm Models AXON EPICON RAIDON air MAX AIR PRESSURE [ psi ] 165 180 180 MAX AIR PRESSURE [ bar ] 11.4 12.4 12.4
40 50 60 70 80 90 100
40 50 60 70 80 90 100
10
10
10
20 30 40 50 60 70 80 90 100
ZIPTIE
20 30
20
30
SAG
ZIPTIE
ZIPTIE
14
FASTEN ZIPTIE AND SLIDE IT DOWN TO DUSTSEAL!
English
SR SUNTOUR forks are designed to be nearly maintenance free. However, as long as moving parts are exposed to moisture and contamination, the performance of your fork might be reduced after several rides. To maintain a high performance, safety and a long life of your fork, a periodic maintenance is required. Please keep in mind that a fork which has not been serviced in accordance with the maintenance instructions will loose its warranty! Never use a pressure washer or any water under pressure to clean your fork as water may enter the fork at the dust seal level. We recommend that your fork is being serviced more fequently as indicated below if you ride in extreme weather (winter time) and terrain conditions. Any case you may feel that your forks performance has changed or handles differently immediately call on your local dealer to inspect your fork.
Maintenance Schedule clean stanchion tubes and dust seals inspect upper tubes for scratches check main fixing bolts for proper torque (Nm) check air pressure oil dust seals with teflon oil (e.g. Brunox Fork Deo) service 1 (at the dealer) service 2 (at the dealer)
every 25h
every 50h
every 100h
SERVICE 1: Checking forks functions / cleaning and greasing bushings / lubricate remote lock cable and housing / checking torque values / checking air pressure / checking fork for any scratches, dents, cracks, bent or tarnished parts and stress marks. SERVICE 2: Service 1 + disassembling / cleaning whole fork / lubricating dust seals and oil wipers / greasing remote lock and travel adjust top caps / sealing air valve top caps by greasing it / checking for any air leakings / checking torque values / tuning according to riders personal preferences.
15
English
SR SUNTOUR warrants its suspension forks to be free from defects in material and workmanship under normal use for a period of two years from the date of original purchase. This warranty is made by SR SUNTOUR Inc. with only the original purchaser and is not transferable to any third party. Lodging a claim under this warranty must be made through the dealer where the bicycle or SR SUNTOUR suspension fork was purchased. To prove the original purchase the original retail invoice has to be provided.
LOCAL LAW: This warranty gives you specific legal rights. According to the state (USA) or province (Canada) or every other country you are living in, you may have other rights than explained within these warranty regulations. These regulations shall be insofar adapted to the local law to be consistent with such law. LIMITATION OF WARRANTY This limited warranty does not apply to any defect of the suspension fork caused by: improper installation, disassembling and re-assembling, intentional breakage, alterations or modification to the fork, any unreasonable use or abuse of the product or any use for which this product was not intended for, accidents, crashes, improper maintenance, repairs improperly performed. The obligation of this Limited Warranty is restricted to repairs and replacements of the suspension fork or any parts of it in which there is a defect in materials or workman-ship within a period of two years. SR SUNTOUR makes no express or implied warranties of fitness or merchatability of any kind, except as set forth above. Under no circumstances will SR SUNTOUR be liable for incidental or consequential damages. Damages which are caused by the use of other manufacturers replaceements parts or damages which are caused by the use of parts that are not compatible or suitable to SR SUNTOUR suspension forks are not covered by this warranty. This warranty does not apply to normal wear and tear. WEAR AND TEAR PARTS: Dust Seals O-rings Rubber Moving Parts Stanchion Tubes
Please note that there is a limited warranty of 1 year on all SR SUNTOUR cartridges! Please note that there is a limited warranty on sleeves and glide rings of 6 month! 16
English
SR SUNTOUR BEDIENUNGSANLEITUNG
INHALTSVERZEICHNIS
OWNER'S MANUAL
INHALTSVERZEICHNIS..............................................................................................................1 EINSATZBEREICHE ....................................................................................................................1 WICHTIGE SICHERHEITSHINWEISE..........................................................................................4 VOR JEDER FAHRT! ...................................................................................................................5 GABELMONTAGE.......................................................................................................................5 MONTAGEANLEITUNG..............................................................................................................6 REIFENABSTAND! .....................................................................................................................6 INSTALLATION DES REMOTE LOCK HEBELS. ................................................................................................ AXON BAUREIHE . ......................................................................................................................................................7 EPICON BAUREIHE......................................................................................................................................................7 RAIDON RLD BAUREIHE...........................................................................................................................................7 REMOTE LOCK HEBEL INSTALLATION RAIDONair RL BAUREIHE.........................................9 REMOTE TRAVEL ADJUST HEBEL EPICON XC TAD / XC TAD 15QLC..................................10 LOCK- OUT SYSTEME .............................................................................................................. 11 EINSTELLUNG DER ZUGSTUFE...............................................................................................12 REMOTE TRAVEL ADJUST FUNKTION EPICON XC TAD / XC TAD 15QLC............................12 QLOCK-SYSTEM 15 mm...........................................................................................................13 Qloc ANFORDERUNG AN VERWENDETE NABEN.................................................................14 EINSTELLUNG DES NEGATIVFEDERWEGS.............................................................................14 WARTUNG DER GABEL............................................................................................................15 EINGESCHRNKTE GARANTIE...............................................................................................16
EINSATZBEREICHE
Kategorie AXON EPICON RAIDON air Whlen Sie die richtige Gabel anhand der Rahmenhhe und Ihrem persnlichen Fahrstil aus. Beachten Sie, dass die Gabelbaureihen AXON, EPICON und RAIDONair nicht fr Sprnge, Absprnge, aggressive Downhill-Abfahrten, Freerides oder Urban Style vorgesehen sind. Wenn diese Anleitung nicht eingehalten wird, kann das Produkt versagen und es knnen Unflle oder sogar der Tod des Fahrers daraus resultieren. Wenn diese Anleitung nicht eingehalten wird, verfllt die Garantie der Gabel! Freeride All Mountain XC & Marathon DJ / Street
Deutsch
SR SUNTOUR BEDIENUNGSANLEITUNG
Gabelschaft
A
Gabelkrone
B
Standrohre
E
Tauchrohre
C
2
Ausfallenden
D
4
3
Deutsch
SR SUNTOUR BEDIENUNGSANLEITUNG
Lockout per Fernbedienung 1 1 1 1
Modell
SpeedLockout
AXON RLD / RLD 15QLC EPICON RLD / RLD 15QLC EPICON RL / RL QLC15 EPICON LOD / LOD QLC15 EPICON XC TAD EPICON XC TAD 15QLC EPICON RLD 15QLC 29 EPICON LOD 15QLC 29 RAIDON RLD 15QLC air RAIDON LOD 15QLC air RAIDON RLD air RAIDON LOD air RAIDON LO air RAIDON RLD 15QLC 29 air RAIDON LOD 15QLC 29 air 1 1 1 1 1
1 1 1
2 2
Deutsch
SR SUNTOUR BEDIENUNGSANLEITUNG
WICHTIGE SICHERHEITSHINWEISE
WARNUNG!
Wenn diese Warnungen und Hinweise nicht eingehalten werden, kann das Produkt beschdigt werden und es kann zu Verletzungen oder sogar zum Tod des Fahrers kommen.
Lesen Sie diese Anleitung sorgfltig durch, bevor Sie Ihre Federgabel verwenden. Durch falsche Verwendung der Federgabel kann das Produkt beschdigt werden und es kann zu schweren Verletzungen oder sogar zum Tod des Fahrers kommen. Federgabeln enthalten Flssigkeiten und Gase, die unter hohem Druck stehen. Die in dieser Anleitungen enthaltenen Warnungen mssen genauestens befolgt werden, damit die Gefahr von Verletzungen und Todesfllen reduziert wird. Versuchen Sie niemals, SR-SUNTOUR-Dmpferpatronen zu ffnen, da sie Flssigkeiten und Gase enthalten, die unter hohem Druck stehen. Wenn Sie SR-SUNTOUR-Dmpferpatronen ffnen, setzen Sie sich dem Risiko schwerwiegender Verletzungen aus. Verwenden Sie nur Originalersatzteile von SR SUNTOUR. Durch die Verwendung von Zubehr- und Ersatzteilen anderer Hersteller verfllt die Garantie Ihrer Gabel, und die Gabel funktioniert u. U. nicht richtig. Dies kann zu Unfllen, Verletzungen und Tod fhren. SR-Suntour-Federgabeln sind fr die Verwendung mit einem Fahrer vorgesehen. Diese Bedienungsanleitung enthlt wichtige Informationen zur richtigen Montage, Wartung und Pflege Ihrer Federgabel. Beachten Sie jedoch, dass Fachwissen und Spezialwerkzeuge notwendig sind, um SR-SUNTOUR-Gabeln zu montieren, zu warten und zu pflegen. Allgemeines Mechanikwissen reicht u. U. nicht aus, um Federgabeln zu reparieren, zu warten oder zu pflegen. Wir empfehlen daher, die Gabel von einem geschulten und qualifizierten Fahrradmechaniker montieren, warten bzw. pflegen zu lassen. Die falsche Montage, Wartung und Pflege kann zu Schden am Produkt, zu Unfllen, Verletzungen oder Tod fhren. Tragen Sie immer entsprechende Schutzbekleidung. Dazu gehrt ein gut sitzender, ordnungsgem befestigter Helm. Tragen Sie je nach persnlichem Fahrstil gegebenenfalls weitere Schutzbekleidung. berprfen Sie, dass Ihre Ausrstung keine Mngel aufweist. Whlen Sie die richtige Gabel anhand der Rahmenhhe und Ihrem persnlichen Fahr stil aus. Wenn eine Gabel montiert wird, die nicht der Geometrie des Rahmens entspricht, kann die Gabel beschdigt werden und die Garantie der Gabel verfllt. Durch die Montage einer Federgabel wird die Geometrie des Fahrrads und der Umgang damit verndert. Gewhnen sie sich schrittweise daran und trainieren Sie Ihre Fhigkeiten. Schtzen Sie Ihre Grenzen richtig ein und berschreiten Sie sie nie. Wenn Sie das Fahrrad auf einem Fahrradtrger transportieren, muss der Schnellspanner immer vollstndig gelst werden. Wenn der Schnellspanner nicht vollstndig gelst wird, kann die Gabel verbogen werden, zerbrechen oder andere strukturelle Schden erleiden, wenn das Fahrrad vom Fahrradtrger gehoben wird. Wenn das Fahrrad vom Fahrradtrger gefallen ist, fahren Sie bitte erst dann wieder damit, wenn es von einem qualifizierten Fahrradmechaniker inspiziert wurde. Wenn Sie einen Fahrradtrger verwenden, der das Fahrrad nur an den Gabelausfllen hlt, muss auch das Hinterrad befestigt werden. Wenn das Hinterrad nicht ordnungsgem befestigt wurde, kann das Fahrrad wackeln und die Gabelausflle knnen brechen. Beachten Sie, dass die Federgabeln von SR SUNTOUR nicht mit den entsprechenden Rckstrahlern fr den Einsatz im Straenverkehr ausgestattet sind. Wenn Sie das Fahrrad auf ffentlichen Straen oder Fahrradwegen verwenden mchten, mssen die bentigten Rckstrahler an der Gabel befestigt werden. Wenden Sie sich hierfr an Ihren Fachhndler. Lesen Sie alle anderen Handbcher zu Ihrem Fahrrad durch und machen Sie sich mit den Bauteilen Ihres Fahrrads vertraut.
o V
s r
c i
t h
Deutsch
SR SUNTOUR BEDIENUNGSANLEITUNG
VOR JEDER FAHRT!
Fahren Sie nicht mit dem Fahrrad, wenn eines der folgenden Kriterien nicht erfllt wird! Wenn das Fahrrad beschdigt ist oder wenn die notwendigen Einstellungen nicht vorgenommen wurden und das Fahrrad dennoch verwendet wird, kann dies zu Unfllen, schwerwiegenden Verletzungen und Tod fhren. bel, Sattelsttze, Sattel usw. Weitere InformaSind Risse, Dellen, Verformungen oder stumptionen finden Sie auch in den Bedienungsanfe Stellen an der Federgabel oder an einem leitungen der anderen Teilehersteller. anderen Teil Ihres Fahrrads zu sehen? Wenden Sie sich in diesem Fall an einen geschulten berprfen Sie, dass die Laufrder perfekt und qualifizierten Fahrradmechaniker, um die zentriert sind, damit sie die Federgabel und Gabel bzw. das Fahrrad zu berprfen. das Bremssystem nicht berhren. Tritt l aus der Gabel aus? berprfen Sie Wenn Sie ein Schnellspannsystem verwenauch verborgene Stellen wie z. B. die Unden, um die Laufrder zu befestigen, berterseite des Gabelkopfes. Wenden Sie sich in prfen Sie, dass alle Spanner und Muttern diesem Fall an einen geschulten und qualiordnungsgem festgezogen sind. Wenn Sie fizierten Fahrradmechaniker, um die Gabel ein Steckachsensystem verwenden, berbzw. das Fahrrad zu berprfen. prfen Sie, dass alle Befestigungsschrauben mit den entsprechenden Drehmomenten Tauchen Sie die Gabel mit Ihrem Krpergeangezogen sind. wicht ein. Wenn sie zu weich erscheint (wenn der Druck fr einen genauen Negativfederberprfen Sie die Kabellnge und die Kaweg nicht stimmt), pumpen Sie die Gabel belfhrung der Bauteile. Die Kabel drfen die auf, bis der gewnschte Wert erreicht wird. Lenkbewegungen nicht beeintrchtigen. Weitere Informationen finden Sie auch im Wenn Sie Rckstrahler fr den StraenverAbschnitt EINSTELLUNG DES NEGATIVFEkehr verwenden, berprfen Sie, dass sie DERWEGS. sauber und ordnungsgem montiert sind. berprfen Sie, dass die Bremsen ordnungsLassen Sie Ihr Fahrrad leicht auf den Boden gem montiert und eingestellt sind und springen und prfen Sie, ob lose Teile zu hfunktionieren. Dies gilt auch fr alle anderen ren sind. Fahrradteile wie Lenkstange, Pedale, Tretkur-
GABELMONTAGE WARNUNG!
SR SUNTOUR empfiehlt, die Gabel von einem geschulten und qualifizierten Fahrradmechaniker montieren zu lassen. Zur Installation der Gabeln von SR SUNTOUR sind Fachwissen und Spezialwerkzeuge notwendig. Zur Montage einer Federgabel von SR SUNTOUR ist mechanisches Allgemeinwissen u. U. nicht ausreichend. Wenn Sie Ihre Gabel selbst montieren mchten, muss das Ergebnis von einem geschulten und qualifizierten Fahrradmechaniker inspiziert werden. Beachten Sie, dass falsch montierte Gabeln sehr gefhrlich sind und zu Schden am Produkt, zu schwerwiegenden Verletzungen und zum Tod fhren knnen.
Deutsch
SR SUNTOUR BEDIENUNGSANLEITUNG
MONTAGEANLEITUNG
Hinweis! Alle Befestigungsschrauben mssen mit den entsprechenden Drehmomenten, die vom Hersteller bestimmt wurden, angezogen werden. 1. Bauen Sie die alte Gabel aus dem Fahrrad aus. Nehmen Sie dann die Gabellagerschale von der Gabel ab. 2. Messen Sie die Lnge des Gabelschaftrohrs der alten Gabel im Vergleich zur Lnge des Gabelschafts der SR-SUNTOUR-Gabel. Die Standardlnge des Gabelschaftrohrs von SRSUNTOUR-Federgabeln betrgt 255 mm. Daher muss das Gabelschaftrohr mglicherweise auf die entsprechende Lnge zurechtgesgt werden. 3. Zur Bestimmung der richtigen Lnge des Gabelschafts knnen Sie folgende Formel verwenden: Steuerkopf des Rahmens + Steuersatzhhe + Spacer + Hhe der Vorbaukralle 3 mm Abstand WARNUNG! Wenn Ihre SR-SUNTOUR-Gabel in der gewindelosen Ausfhrung geliefert wird, darf kein Gewinde eingeschnitten werden. Die Gabelschfte von SR SUNTOUR sind eingepresst und knnen nicht demontiert werden. Versuchen Sie nicht, den Gabelschaft durch einen Gabelschaft mit Gewinde zu ersetzen. Dadurch verfllt die Garantie der Gabel; es kann zu Schden am Produkt kommen bzw. es knnen schwerwiegende Verletzungen oder Tod des Fahrers verursacht werden. 4. Montieren Sie die Gabellagerschale (30 mm fr 1 1/8") fest oben am Gabelkopf. Bringen Sie die Gabel (Steuersatz, Spacer, Vorbau) wieder am Fahrrad an. Stellen Sie den Steuersatz so ein, dass kein Spiel mehr zu spren ist. Weitere Informationen finden Sie auch in der Montageanleitung vom Hersteller des Vorbaus. Montieren Sie die Bremsen entsprechend der Anleitung des Herstellers. Stellen Sie die Bremsbacken richtig ein. Wenn Sie eine Scheibenbremse verwenden, montieren Sie die Bremse nur in den ursprnglichen Montagelchern fr die Scheibenbremse. Verwenden Sie ausschlielich Cantileverbremsen, die fr Gabelbrcken ohne Bremskabelaufhngung vorgesehen sind. Befolgen Sie die Montageanleitung des Bremsenherstellers. Whlen Sie die richtige Lnge fr das Bremskabel, damit der Einsatz der Gabel nicht beeintrchtigt wird. Setzen Sie das Rad wieder ein. Wenn Sie ein Schnellspannsystem zur Befestigung des Laufrads verwenden, berprfen Sie, dass alle Spanner und Muttern ordnungsgem angezogen sind (es mssen mindestens vier Windungen verwendet werden, wenn der Spanner geschlossen ist). Wenn die Gabel mit einem Steckachsensystem versehen ist, mssen alle Befestigungsschrauben darauf berprft werden, ob sie mit dem richtigen Drehmoment angezogen wurden. Weitere Informationen finden Sie auch im Abschnitt Qloc in dieser Anleitung.
5.
6.
REIFENABSTAND!
Ihre Federgabel von SR SUNTOUR ist fr 26"-Reifen vorgesehen. Jeder Reifen hat einen anderen Auendurchmesser (Breite und Hhe des Reifens). berprfen Sie daher den Abstand zwischen Reifen Gabel, damit der Reifen die Gabel in keinem Fall berhrt. Denken Sie daran, dass sich der engste Teil der Gabel an den Anltsockeln der Bremse befindet. Wenn Sie das Rad ausbauen mchten, mssen Sie u. U. die Luft aus dem Reifen lassen, damit es durch die Anltsockel passt. 6
Deutsch
SR SUNTOUR BEDIENUNGSANLEITUNG
Reifenabstandtest:
Hinweis! Die Verwendung eines Reifens, der die maximale Reifengre fr Ihre Gabel bersteigt, ist sehr gefhrlich und kann zu Unfllen, schwerwiegenden Verletzungen und Tod des Fahrers fhren. 1. Lassen Sie die Luft aus der Gabel. 2. Tauchen Sie die Gabel bis zum Anschlag ein. 3. Messen Sie den Abstand zwischen der Oberseite des Reifens und der Unterseite des Gabelkopfs. Der Abstand darf nicht unter 10 mm liegen! Wenn der Reifen zu gro ist, schlgt er gegen die Unterseite des Gabelkopfs, wenn die Gabel bis zum Anschlag eingetaucht ist. 4. Entlasten Sie die Gabel wieder. Beachten Sie, dass der Abstand verringert wird, wenn Sie ein Schutzblech verwenden! Wiederholen Sie den Reifenabstandtest, um sicherzustellen, dass der Abstand gro genug ist. Wiederholen Sie den Test auch jedes Mal, wenn Sie den Reifen wechseln!
3 mm 1,5 Nm
Nehmen Sie die Plastikhaube mit einem Inbusschlssel (2,5 mm) ab. 2,5 mm
Lsen Sie die Schraube, die den Seilzug hlt, mit einem Inbusschlssel (2 mm). 2,0 mm 7
Deutsch
SR SUNTOUR BEDIENUNGSANLEITUNG
Ziehen Sie den Seilzug durch die uere Kabelhalterung und durch das Loch in der Abdeckung. Spannen Sie den Seilzug leicht und ziehen Sie ihn mit einem Inbusschlssel (2 mm) fest.
2 mm 0,5 Nm
Schneiden Sie den Seilzug auf die richtige Lnge, so dass er noch in den Schlitten passt. SCHNEIDEN 7 mm Dieses Bild zeigt die Arretierung in der Position OFFEN. Der Seilzug hat genau die richtige Lnge, er passt noch in den Schlitten.
Setzen Sie die Plastikhaube wieder auf und befestigen Sie sie mit einem Inbusschlssel (2,5 mm). Ziehen Sie sie leicht an.
2,5 mm 0,5 Nm
Wenn die Gabel nicht arretiert wird, ist die Spannung des Seilzugs vermutlich zu gering. Erhhen Sie in diesem Fall die Seilzugspannung, indem Sie die Stellschraube gegen den Uhrzeigersinn drehen. Wenn die Seilzugspannung zu hoch ist und die Arretierung der Gabel nicht gelst werden kann, drehen Sie die Stellschraube im Uhrzeigersinn.
DREHEN
Stellschraube Trommel
Deutsch
SR SUNTOUR BEDIENUNGSANLEITUNG
RAIDONair RL BAUREIHE
icon
e Sieh
Bild
Ep on & x A r
ABNEHMEN
Lsen Sie die Schraube, die den Seilzug hlt, mit einem Inbusschlssel (1,5 mm). 1,5 mm
Ziehen Sie den Seilzug durch die uere Kabelhalterung und durch das Loch in der Abdeckung. Spannen Sie den Seilzug leicht und ziehen Sie ihn mit einem Inbusschlssel (1,5 mm) fest.
1,5 mm 0,5 Nm
EINSCHNAPPEN
Deutsch
SR SUNTOUR BEDIENUNGSANLEITUNG
Schneiden Sie den Seilzug auf die richtige Lnge zurecht. Eine Lnge von ca. 12 mm wird empfohlen. SCHNEIDEN 12 mm Befestigen Sie mit einer Spitzzange eine Abschlusshlse am Ende des abgeschnittenen Seilzugs.
Wenn die Gabel nicht arretiert wird, ist die Spannung des Seilzugs vermutlich zu gering. Erhhen Sie in diesem Fall die Seilzugspannung, indem Sie die Stellschraube gegen den Uhrzeigersinn drehen. Wenn die Seilzugspannung zu hoch ist und die Arretierung der Gabel nicht gelst werden kann, drehen Sie die Stellschraube im Uhrzeigersinn.
DREHEN
Stellschraube Trommel
Stellschraube Trommel
3 mm 0,5 Nm
Ziehen Sie den Seilzug durch die uere Kabelhalterung und durch die Seilklemme. Spannen Sie den Seilzug leicht und ziehen Sie ihn mit einem Inbusschlssel (2 mm) fest. 10
2 mm 1,5 mm 0,5 Nm
Deutsch
SR SUNTOUR BEDIENUNGSANLEITUNG
Schneiden Sie den Seilzug auf die richtige Lnge zurecht. Eine Lnge von ca. 12 mm wird empfohlen.
SCHNEIDEN 12 mm Befestigen Sie mit einer Spitzzange eine Abschlusshlse am Ende des abgeschnittenen Seilzugs.
90
ALLE AXON RLD & RL MODELLE ALLE EPICON RLD & RL MODELLE ALLE RAIDONair RLD & RL MODELLE Drcken Sie den Remote-Lock-Hebel Lenkstange, um die Gabel zu arretieren. Drcken Sie den blauen Knopf, um die Arretierung zu lsen.
11
Deutsch
SR SUNTOUR BEDIENUNGSANLEITUNG
EINSTELLUNG DER ZUGSTUFE
Mit der Einstellung der Zugstufe der hydraulischen Federgabeln von SR SUNTOUR knnen Sie Ihre Gabel an Ihre persnlichen Vorlieben und das Terrain, in dem Sie fahren, anpassen. Mit dieser Funktion knnen Sie die Geschwindigkeit einstellen, mit der die Gabel ausfedert, nachdem sie belastet wurde. Wenn Sie in einem Terrain mit vielen kleinen, schnellen Unebenheiten fahren, sollten Sie die Ausfedergeschwindigkeit der Gabel erhhen. Andernfalls kann das Vorderrad den Bodenkontakt verlieren. Wenn Sie in einem Terrain mit vielen groen, langsamen Wellen fahren, sollten Sie die Ausfedergeschwindigkeit der Gabel verringern. ALLE AXON RLD MODELLE ALLE EPICON RLD & LOD MODELLE ALLE RAIDONair RLD & LOD MODELLE Drehen Sie die Stellschraube zur Vergrerung der Ausfedergeschwindigkeit Ihrer Gabel gegen den Uhrzeigersinn. Um die Geschwindigkeit zu verringern, drehen Sie sie im Uhrzeigersinn.
DREHEN
Stellschraube
Mit dieser Einstellungsfunktion Ihrer Gabel knnen Sie den Federweg der Gabel innerhalb eines Bereichs von 40 mm einstellen. Die Einstellung des Federwegs von SR SUNTOUR ist stufenlos mglich, d. h. Sie knnen einen beliebigen Federweg zwischen dem maximalen und dem minimalen Federweg der Gabel einstellen. Die Patrone zur Einstellung des Federwegs selbst verfgt ber ein Pneumatiksystem. Bei der Einstellung des Federwegs wird Luft von einer Luftkammer in die andere gepumpt. Normalerweise befindet sich das Luftventil (zur Einstellung des Luftdrucks) an der rechten Seite des Gabelkopfs. Aufgrund des Einstellsystems fr den Federweg befindet sich die Ventilkappe am unteren Ende des Tauchrohrs.
Drcken
Gabel eintauchen
12
Drcken Sie den Travel Adjust Hebel nach unten und halten Sie ihn gedrckt. Tauchen Sie die Gabel ein. Lassen Sie den Hebel los. Entlasten Sie die Gabel.
Deutsch
SR SUNTOUR BEDIENUNGSANLEITUNG
QLOCK-SYSTEM 15 mm
ALLE AXON 15QLC MODELLE ALLE EPICON 15QLC MODELLE ALLE RAIDONair 15QLC MODELLE
So lange einstellen, bis das richtige Drehmoment zum Schlieen des Schnellspanners gefunden wurde.
C KE DR
DR
EN
KE N
1. HINEINDRCKEN 3. SCHLIESSEN
1. GESCHLOSSEN
3. HINEINDRCKEN + SCHIEBEN
2. EINSTELLEN
KLICK!
4. GESCHLOSSEN
S
LI CH ESS
FF
2. FFNEN
4. HERAUSZIEHEN
NE
CK
EN DR
13
Deutsch
SR SUNTOUR BEDIENUNGSANLEITUNG
Qloc ANFORDERUNG AN VERWENDETE NABEN
Aufgrund der Funktionsweise unserer Qloc Achsen, gibt es bestimmte Vorausetzungen der verwendeten Naben damit dieses System gescheidig funktioniert. Sie finden die Eklrung untenstehend.
Nicht-Empfohlene Form Eingeschrnkte Funktion Kanten innerhalb der Nabe knnen dazu fhren das Achse stecken bleibt
20 % 25 % 28 mm 35 mm RAIDON air
40 50 60 70 80 90 100
40 50 60 70 80 90 100
10
10
KABELBINDER
KABELBINDER
14
BRINGEN SIE DEN KABELBINDER AN UND SCHIEBEN SIE IHN BIS AN DIE STAUBSCHUTZKAPPE!
SETZEN SIE SICH IN NORMALER FAHRPOSITION STEIGEN SIE AB UND MESSEN SIE DEN ABSTAND AUF DAS FAHRRAD: ZWISCHEN DER STAUBSCHUTZKAPPE UND DEM VERMEIDEN SIE SCHAUKELBEWEGUNGEN! KABELBINDER!
Deutsch
10
20 30 40 50 60 70 80 90 100
KABELBINDER
20 30
20
30
SR SUNTOUR BEDIENUNGSANLEITUNG
WARTUNG DER GABEL
Die Gabeln von SR SUNTOUR wurden so entwickelt, dass sie fast wartungsfrei sind. Da die beweglichen Teile jedoch Feuchtigkeit und Verunreinigungen ausgesetzt sind, kann die Leistung Ihrer Gabel nach mehreren Fahrten beeintrchtigt sein. Damit hohe Leistung, Sicherheit und eine lange Lebensdauer der Gabel gewhrleistet werden, ist eine regelmige Wartung notwendig. Bitte denken Sie daran, dass Gabeln, die nicht entsprechend der Wartungsanleitung gewartet wurden, ihre Garantie verlieren! Verwenden Sie keine Hochdruckreinigungsgerte oder andere Reinigungsverfahren, die Druckwasser verwenden, um die Gabel zu reinigen, da das Wasser in die Staubschutzkappen eindringen kann. Wir empfehlen, die Gabel hufiger zu warten, als in der unten stehenden Tabelle aufgefhrt ist, wenn das Fahrrad unter extremen Wetter- (z. B. im Winter) oder Terrainbedingungen eingesetzt wird. Sollten Sie der Meinung sein, dass sich die Leistung der Gabel gendert hat oder der Umgang damit anders ist, wenden Sie sich sofort an Ihren Fachhndler vor Ort, um die Gabel inspizieren zu lassen.
15
Deutsch
SR SUNTOUR BEDIENUNGSANLEITUNG
EINGESCHRNKTE GARANTIE
SR SUNTOUR garantiert bei normaler Nutzung fr zwei Jahre ab dem Tag des ursprnglichen Kaufes, dass die Federgabel frei von Material- und Verarbeitungsmngeln ist. Diese Garantie wird von SR SUNTOUR Inc. nur dem ursprnglichen Kufer gewhrt und kann nicht auf Dritte bertragen werden. Ein Anspruch gem dieser Garantie kann nur bei dem Fachhndler geltend gemacht werden, bei dem das Fahrrad oder die SR-SUNTOUR-Federgabel erworben wurde. Als Beweis des ursprnglichen Kaufs muss die ursprngliche Verkaufsrechnung vorgelegt werden. RTLICHES RECHT: Durch diese Garantie erhalten Sie spezifische Rechte. Je nachdem, in welchem Bundesstaat (USA), in welcher Provinz (Kanada) oder in welchem Land sie wohnen, haben Sie u. U. andere als die in dieser Garantie genannten Rechte. Diese Bestimmungen werden soweit an das jeweilige Recht angepasst, damit sie die entsprechende Rechtsprechung erfllen. GARANTIEEINSCHRNKUNG Diese eingeschrnkte Garantie gilt nicht fr Mngel an der Federgabel, die durch folgende Ursachen entstanden sind: fehlerhafte Montage, Demontieren und erneutes Zusammensetzen, vorstzliche Zerstrung, nderungen oder Modifikationen der Gabel, unangemessene Nutzung oder Missbrauch des Produkts oder Verwendung fr einen Zweck, fr den dieses Produkt nicht vorgesehen war, Unflle, Strze, fehlerhafte Wartung, falsch ausgefhrte Reparaturen. Die aus dieser eingeschrnkten Garantie entstehenden Verpflichtungen beschrnken sich auf Reparaturen oder Ersatz der Federgabel oder von Teilen davon innerhalb eines Zeitraums von zwei Jahren, wenn ein Material- oder Verarbeitungsmangel vorliegt. SR SUNTOUR bernimmt auer den oben aufgefhrten Bestimmungen keine direkten oder indirekten Garantien, dass dieses Produkt fr einen bestimmten Zweck geeignet oder handelsfhig ist. SR SUNTOUR haftet in keinem Fall fr beilufig entstandene oder Folgeschden. Schden, die durch die Verwendung von Ersatzteilen anderer Hersteller oder von Ersatzteilen, die fr Federgabeln von SR SUNTOUR nicht vorgesehen oder geeignet sind, entstehen, werden nicht von dieser Garantie gedeckt. Diese Garantie bezieht sich nicht auf normale Abnutzungs- und Verschleierscheinungen. VERSCHLEISSTEILE: Staubschutzkappen O-Ringe Bewegliche Teile aus Gummi Standrohre
Bitte beachten Sie, dass fr alle SR-SUNTOUR-Patronen eine eingeschrnkte Garantie von einem Jahr gilt! Bitte beachten Sie, dass fr Gleitringe und Hlsen eine eingeschrnkte Garantie von sechs Monaten gilt! 16
Deutsch
TABLE DES MATIRES....................................................................................................1 UTILISATION RECOMMANDE .....................................................................................1 INFORMATIONS IMPORTANTES CONCERNANT LA SCURIT...................................4 AVANT CHAQUE SORTIE !..............................................................................................5 INSTALLATION DE LA FOURCHE...................................................................................5 CONSIGNES D'INSTALLATION......................................................................................5 INSTALLATION DE LA FOURCHE...................................................................................6 ESPACE LIBRE DES PNEUS ! ..........................................................................................6 INSTALLATION DU LEVIER REMOTE LOCK..................................................................... GAMME AXON . ...........................................................................................................................................7 GAMME EPICON...........................................................................................................................................7 GAMME RAIDON RLD ..........................................................................................................................7 INSTALLATION DU LEVIER REMOTE LOCK GAMME RAIDONair RL............................8 LEVIER REMOTE TRAVEL ADJUST EPICON XC TAD / XC TAD 15QLC...................... 10 LOCK-OUT BLOCAGE................................................................................................... 11 RGLAGE DE L'AMORTISSEMENT DU REBOND......................................................... 11 FONCTION REMOTE TRAVEL ADJUST EPICON XC TAD / XC TAD 15QLC.................. 12 QLOCK 15 mm.............................................................................................................. 12 RGLAGE DE L'ENFONCEMENT................................................................................... 14 ENTRETIEN DE LA FOURCHE....................................................................................... 14 GARANTIE LIMITEE......................................................................................................16 UTILISATION RECOMMANDE
Catgorie AXON EPICON RAIDON air Il est trs important de bien slectionner le type de fourche le plus adapt la taille de votre cadre, ainsi qu' votre style de conduite. Veuillez galement prendre en compte le fait que les fourches de la gamme AXON, EPICON et RAIDONair n'ont pas t conues pour les sauts, les chutes, les descentes de pistes agressives, le freeriding ou la conduite urban style. Tout non-respect de ces consignes risque de causer une dfaillance du produit ou mme des accidents, pouvant entraner la mort du cycliste. La garantie de la fourche sera immdiatement rvoque en cas de non-respect de ces consignes ! Freeride All Mountain XC & Marathon DJ/Street
Franais
Pivot de fourche
A
Tte de fourche
B
Plongeurs
E
Fourreaux infrieurs
C
2
Pattes
D
4
3
Franais
Modle AXON RLD / RLD 15QLC EPICON RLD / RLD 15QLC EPICON RL / RL QLC15 EPICON LOD / LOD QLC15 EPICON XC TAD EPICON XC TAD 15QLC EPICON RLD 15QLC 29 EPICON LOD 15QLC 29 RAIDON RLD 15QLC air RAIDON LOD 15QLC air RAIDON RLD air RAIDON LOD air RAIDON LO air RAIDON RLD 15QLC 29 air RAIDON LOD 15QLC 29 air
1 1 1 1 1
Franais
Veuillez lire ce mode d'emploi dans son intgralit avant d'utiliser votre fourche suspension. Toute utilisation inadquate de cette fourche suspension risque d'endommager le produit, de causer des blessures ou mme d'entraner la mort du cycliste. Etant donn que les fourches de suspension contiennent des liquides et des gaz sous trs haute pression, toutes les mises en garde comprises dans ce mode d'emploi devront tre suivies la lettre afin de rduire les risques de blessures ou d'accidents mortels. N'essayez jamais d'ouvrir une cartouche SR SUNTOUR, en raison des liquides et des gaz sous trs haute pression qui s'y trouvent, comme indiqu ci-dessus. L'ouverture d'une cartouche SR SUNTOUR prsente des risques srieux de blessures graves ou mme mortelles. N'utilisez que des pices d'origine SR SUNTOUR. En effet, toute utilisation d'autres pices de rechange annule la garantie de votre fourche et risque d'endommager celle-ci. Ceci pourrait causer un accident, des blessures graves ou mme mortelles. Les fourches suspension SR SUNTOUR ont t conues pour tre utilises par un seul cycliste. Ce mode d'emploi prsente des consignes concernant l'installation, les rparations et l'entretien de votre fourche suspension. Veuillez cependant prendre en compte le fait que des connaissances avances et des outils spciaux sont ncessaires pour pouvoir installer, rparer et entretenir des fourches SR SUNTOUR. Des connaissances de base sur la mcanique ne sont pas suffisantes pour pouvoir rparer, rgler ou entretenir une fourche suspension. Nous recommandons donc de confier les procdures d'installation, de rglage et/ou d'entretien un mcanicien spcialis dans le cyclisme. En effet, toute erreur d'installation, de rglage ou d'entretien prsente des risques graves, pouvant entraner une dfaillance du produit, un accident, des blessures ou mme parfois, la mort. Veuillez toujours porter les lments de protection requis. Ceux-ci comportent, entre autres, un casque de protection adquat et bien fix votre tte. Il est galement recommand d'utiliser d'autres lments de protection selon votre style de conduite. Assurez-vous que votre matriel soit en parfait tat. Il est capital de slectionner le type de fourche le mieux adapt la taille de votre cadre, ainsi qu' votre style de conduite. En effet, l'installation d'une fourche qui ne correspond pas la gomtrie de votre cadre risque d'entraner une dfaillance de celle-ci, et annule la garantie de la fourche. L'installation de votre fourche suspension modifie la gomtrie et la prise en mains de votre vlo. Familiarisez-vous avec ses caractristiques de conduite et entranez-vous matriser votre vlo. Apprenez connatre vos limites et ne les dpassez jamais. En cas de transport par porte-vlo, dbloquez toujours le mcanisme de blocage rapide. En effet, un dfaut de blocage risquerait de tordre, briser, ou d'endommager d'autre manire votre vlo lors de son dmontage du porte-vlo. En cas de chute de votre vlo du porte-vlo, faites-le inspecter par un mcanicien cycliste spcialis avant de le conduire nouveau. Si vous utilisez un porte-vlo qui ne fait que bloquer les pattes de fourche, assurez-vous de fixer galement la roue arrire. En effet, une roue arrire non fixe pourrait faire vibrer le vlo en entier, ce qui risque d'endommager les pattes de fourche. Veuillez noter que les fourches suspension SR SUNTOUR ne sont pas fournies avec les rflecteurs requis pour la conduite sur route. Si vous dsirez conduire votre vlo sur des routes publiques ou pour cyclistes, votre revendeur devra installer sur votre fourche les rflecteurs requis. Veuillez lire tous les autres modes d'emploi fournis avec votre vlo, et familiarisez-vous avec tous les composants monts dessus.
Tout non-respect des mises en garde et des consignes d'utilisation risque d'endommager le produit, de causer des blessures ou mme d'entraner la mort du cycliste.
AVERTISSEMENT !
t t
n e
i t
n o
Franais
Ne jamais conduire un vlo qui ne passe pas les critres de test suivants! Conduire votre vlo sans avoir limin tout dfaut ou effectu tous les rglages ncessaires peut causer des risques d'accident, de blessures ou mme de mort.
Avez-vous remarqu des craquelures, des fissures, des courbures ou des traces de dcoloration sur votre fourche suspension ou sur tout autre composant de votre vlo ? Veuillez dans ce cas consulter un mcanicien pour vlos qualifi, afin de faire vrifier votre fourche et votre vlo. Avez-vous dcel un fuite d'huile de la fourche ? Vrifiez galement les surfaces caches comme le dessous de la tte de fourche. Veuillez dans ce cas consulter un mcanicien pour vlos qualifi, afin de faire vrifier votre fourche et votre vlo. Comprimez la fourche en pesant dessus de tout votre poids. Si elle semble trop molle, par rapport la pression d'enfoncement correcte, il sera ncessaire de la gonfler jusqu' obtenir la valeur adquate. Veuillez galement vous reporter au chapitre REGLAGE DE L'ENFONCEMENT Assurez-vous que les freins soient correctement installs/rgls, et qu'ils fonctionnent parfaitement. Ceci s'applique galement aux autres composants de votre vlo, comme le cintre, les pdales, la manivelle, la tige de selle, la selle elle-mme, etc. Veuillez galement vous reporter aux modes d'emploi des autres composants. Assurez-vous galement que les roues soient parfaitement centres, afin d'viter tout contact avec la fourche suspension ou le systme de freinage. Si vous utilisez un systme de blocage d'essieu rapide, assurez-vous que tous les leviers et crous soient correctement ajusts. Si vous utilisez un systme par essieu, assurezvous que tous les boulons de fixation aient bien t serrs aux valeurs de couple adquates. Vrifiez la longueur et la disposition des cbles des diffrents composants. Assurez-vous qu'ils ne viennent pas entraver les mouvements de braquage. Si vous utilisez des rflecteurs pour cyclisme sur route, assurez-vous qu'ils soient propres et correctement installs. Faites rebondir lgrement votre vlo au sol, en l'observant attentivement pour dceler tout dfaut de serrage ou bruit suspect.
CONSIGNES D'INSTALLATION
Remarque ! Tous les boulons de fixation devront tre serrs aux valeurs de couple spcifies par les fabricants 1. 2. Dmontez la fourche d'origine de votre vlo. Retirez ensuite la bague de la tte de fourche. Mesurez la longueur du pivot de fourche d'origine par rapport celle du pivot de fourche SR SUNTOUR. Les fourches suspension SR SUNTOUR sont fournies avec une longueur de pivot de 255 mm. Il est donc possible que le pivot de fourche doive tre coup pour obtenir une longueur adquate
Franais
Il est possible d'utiliser la formule suivante pour calculer la longueur correcte du pivot de fourche :
Tube de direction du cadre + Hauteur du jeu de direction + Entretoises + Hauteur de la potence 3 mm de jeu
ATTENTION ! Si votre fourche SR SUNTOUR est fournie avec un pivot de fourche non filet, ne pas en rajouter. Les pivots de fourche SR SUNTOUR s'installent par pression simple, sans dgagement. N'essayez pas de remplacer le pivot de fourche d'origine par un pivot filet. En effet, ceci annulerait la garantie de la fourche, en raison des risques de dfaillance du produit, de blessures graves ou mme de mort du cycliste. 4. Installez la bague de jeu de direction (30 mm pour 1 1/8") fond contre la bague de la tte de fourche. Rinstaller la fourche (jeu de direction, entretoises, potence) sur le vlo. Ajustez-la jusqu' ne plus sentir de jeu. Veuillez galement consulter les consignes d'installation du fabricant. Installez les freins en suivant les consignes du fabricant. Prenez garde bien ajuster les patins de frein. Si votre vlo dispose de freins disque, ne montez le frein que sur les orifices de montage d'origine du disque. N'utilisez que des freins cantilever, conus pour tre utiliss avec des appuis sans brides de support. Consultez si ncessaire les instructions d'installation du fabricant des freins, et suivez-les la lettre. Choisir galement une longueur correcte du cble des freins, afin qu'il ne vienne pas entraver les mouvements de la fourche. Rinstallez la roue sur le vlo. Si vous utilisez un systme blocage rapide de la roue, vrifiez le bon serrage des pices de fixation et des crous (quatre filets ou plus devront tre engags dans l'crou en position ferme) Si votre fourche dispose d'un systme au travers de l'essieu, vrifiez galement que tous les boulons soient serrs aux valeurs de couple adquates. Veuillez de mme consulter le paragraphe Qloc de ce mode d'emploi.
5.
6.
4. 6
Si vous utilisez un garde-boue, rappelez-vous que l'espace libre est limit ! Effectuez nouveau le Test d'espace libre du pneu pour vrifier que ce dernier est suffisant. Ce test devra tre effectu nouveau, chaque changement de pneu !
Franais
Installez le Remote-Lock-Lever sur le cintre, l'aide d'une cl hexagonale de 3 mm. Vous pouvez ensuite remonter le frein et la manette du drailleur.
3 mm 1,5 Nm
Faites passer le cble par le butoir du couvercle et par l'orifice du couvercle. Tendre lgrement le cble, puis serrez-le l'aide d'une cl hexagonale de 2 mm.
2 mm 0,5 Nm
Coupez le cble une longueur raisonnable, afin qu'il puisse rentrer dans le support coulissant. COUPER 7 mm 7
Franais
L'unit de blocage distance est reprsente sur la photo en position OUVERTE . Le cble a t coup la longueur idale ; il s'adapte parfaitement au support amovible.
Rinstallez le couvercle en plastique l'aide d'une cl hexagonale de 2,5 mm. Resserrez lgrement l'ensemble. 2,5 mm 0,5 Nm
Si la fourche ne se bloque pas, ceci indique que la tension du cble est probablement trop basse. Il faut dans ce cas augmenter la tension du cble en faisant tourner le barillet de rglage dans le sens contraire des aiguilles d'une montre. De mme, si une tension trop importante du cble ne permet pas de dbloquer la fourche, il faudra faire tourner le barillet dans le sens des aiguilles d'une montre.
TOURNER
Barillet de rglage
GAMME RAIDONair RL
i Voir
mag
Ep on & x A e
icon
DMONTER
Franais
Dvissez le boulon de fixation du cble l'aide d'une cl hexagonale de 1.5 mm. 1,5 mm
Faites passer le cble par le butoir du couvercle et par l'orifice du couvercle. Tendre lgrement le cble, puis serrez-le l'aide d'une cl hexagonale de 1.5 mm.
1,5 mm 0,5 Nm
CLIPSER
Couper le cble la longueur voulue. Une longueur de 12 mm environ est recommande. COUPER 12 mm Placez un capuchon de protection au bout du cble, l'aide d'une pince bec effil.
Franais
TOURNER
Barillet de rglage
Barillet de rglage
1,5 mm 0,5 Nm
Faites passer le cble par le butoir du couvercle et par le barillet. Tendre lgrement le cble, puis serrez-le l'aide d'une cl hexagonale de 2 mm.
1,5 mm 0,5 Nm
Couper le cble la longueur voulue. Une longueur de 12 mm environ est recommande. COUPER 12 mm Placez un capuchon de protection au bout du cble, l'aide d'une pince bec effil.
10
Franais
La fonction de blocage Lock-Out des fourches SR SUNTOUR a t conue pour rduire autant que possible les battements pendant la conduite hors-selle ou en pentes raides (uphill). Les fourches ne sont pas alors bloques 100 %. Un espace libre de quelques millimtres est conserv, grce notre Anti-Blow-Off-System . Ce systme offre un degr de protection supplmentaire, particulirement utile si vous avez oubli de dbloquer la fourche alors que vous voluez en terrain difficile. Vous ne devrez nanmoins jamais configurer votre fourche en Lock-Out-Mode pendant que vous voluez en terrain difficile, par exemple en descendant une pente ou pendant un saut. Ceci comporte en effet un risque srieux d'endommagement de la fourche, en cas de compression pleine charge. Ceci pourrait entraner un accident, des blessures graves ou mme la mort du cycliste. Tous modele de la gamme EPICON LOD & LO RAIDONair LOD & LO La molette Speed Lock Out devra tre tourne de 90 dans le sens contraire des aiguilles d'une montre pour dbloquer la fourche. Tous modeles de la gamme AXON RLD & RL EPICON RLD & RL RAIDONair RLD & RL Le Remote-Lock-Lever devra tre tourn vers le cintre pour bloquer la fourche. Pour la dbloquer, il faut appuyer sur le bouton de dblocage bleu.
90
TOURNER
Bague de rglage
11
Franais
La fonction de rglage distance de la fourche vous permet de modifier la longueur de dplacement sur une plage de 40 mm. Le rglage distance SR SUNTOUR fonctionne en continu, ce qui permet de choisir la distance qui vous convient sur toute la plage des valeurs, entre le maximum et le minimum. La cartouche de rglage de course fonctionne elle-mme comme un systme pneumatique. Lors du changement, l'air passera d'une chambre l'autre. Normalement la soupape air (rglage de la pression d'air) est situe sur la droite de la tte de fourche. En raison de la configuration du systme de rglage, le capuchon de la soupape air se trouve au bas du fourreau.
Appuyer
Comprimer la fourche
Appuyez sur le levier de rglage du dplacement vers le bas, et maintenez-le enfonc. Comprimez la fourche. Relchez le levier. Dcomprimez la fourche.
QLOCK 15 mm
Tous modeles de la gamme AXON15QLC Tous modeles de la gamme EPICON 15QLC Tous modeles de la gamme RAIDON 15QLC
2. AJUSTER
1. GLISSER
12
CLIC !
Franais
A P P UY
ER A P P
Formes non recommandes Fonctionnement dpendant dela forme Les rebords du moyeu risquent dentraver les dplacements delaxe
R
PP
UYER
3. BLOQUER
1. FERM
3. APPUYER + ENFONCER
4. FERM
O UV
RIR
2. OUVRIR 4. EXTRAIRE
ER UY A
13
Franais
L'enfoncement (SAG) correspond la compression due au seul poids et la position assise du cycliste, indpendamment du style de conduite. Etant donn que chaque cycliste a un poids et une faon de s'asseoir qui lui sont propres, l'enfoncement (le sag) de la fourche sera plus ou moins prononc. Afin de garantir un fonctionnement adquat de votre fourche et pour ne pas bloquer
son potentiel, une bonne configuration du SAG est la seule manire de dcouvrir la pression correcte de votre fourche. Course 80 mm 100 mm 120 mm 140 mm SAG en % SAG en mm Modles AXON EPICON RAIDON air PRESSION D'AIR MAXI [ psi ] 165 180 180 PRESSION D'AIR MAXI [ bar ] 11,4 12,4 12,4
15 % 20 % 12 mm 16 mm 15 % 20 % 15 mm 20 mm 15 % 20 % 18 mm 24 mm 20 % 25 % 28 mm 35 mm
40 50 60 70 80 90 100
40 50 60 70 80 90 100
10
10
ATTACHE
ATTACHE
RESSERREZ L'ATTACHE, PUIS FAITES-LA GLISSER ASSEYEZ-VOUS SUR VOTRE VLO EN POSITION DE DESCENDEZDUVLO,PUISRELEVEZLADISTANCE VERS LE JOINT TANCHE AUX POUSSIRES ! CONDUITENORMALE!VITEZTOUTBATTEMENT! ENTREL'ATTACHEETLEJOINTANTI-POUSSIRES!
ENTRETIEN DE LA FOURCHE
Les fourches SR SUNTOUR ont t conues pour une utilisation ne requirant pratiquement aucun entretien. Cependant, tant donn que les pices amovibles sont constamment exposes l'humidit et la crasse, le fonctionnement de votre fourche risque d'tre moins efficace aprs quelques sorties. Un entretien priodique est donc requis, afin de garantir le bon fonctionnement, la scurit et la longue dure de vie de votre fourche. N'oubliez pas qu'une fourche n'ayant pas t entretenue selon les consignes suivantes perdra sa garantie ! N'utilisez jamais une laveuse pression ou tout autre machine jet d'eau sous pression pour nettoyer la fourche, en raison des risques d'infiltration d'eau au niveau du joint anti-poussires.
14
Franais
10
20 30 40 50 60 70 80 90 100
ATTACHE
20 30
20
30
De mme, si vous conduisez souvent dans des conditions extrmes (en hiver) et sur des terrains difficiles, nous recommandons d'augmenter la frquence d'entretien de la fourche par rapport aux valeurs ci-dessous. Si vous sentez que la fourche ne se comporte plus comme avant, veuillez immdiatement contacter votre revendeur afin de la faire inspecter.
ENTRETIEN DE LA FOURCHE
Calendrier d'entretien nettoyer les plongeurs et les joints anti-poussires inspecter les tubes pour dceler d'ventuelles craquelures vrifier le bon serrage (Nm) des boulons de fixation vrifier la pression de l'air huiler les joints anti-poussires l'huile au tflon (par ex. Brunox Fork Deo) service 1 (auprs du revendeur) service 2 (auprs du revendeur) SERVICE 1 : Vrification du bon fonctionnement de la fourche / nettoyage et graissage des coussinets / lubrification du cble de commande distance et de son botier / vrification des couples de serrage / vrification de la pression d'air / vrification des raflures, fissures, craquelures, courbures ou dcoloration de pices et autres symptmes d'usure. SERVICE 2 : Service 1 + dmontage / nettoyage de la fourche en entier / lubrification des joints anti-poussires et des racleurs d'huile / graissage du blocage distance et des capuchons suprieurs de rglage de course / tanchit des capuchons de soupape d'air suprieure par graissage / dtection des fuites d'air / vrification des couples de serrage / tuning selon les prfrences de chaque cycliste. aprs chaque sortie toutes les 25 h toutes les 50 h toutes les 100 h
15
Franais
SR SUNTOUR garantit ses fourches suspension contre tout dfaut matriel et de main d'uvre dans des conditions normales d'utilisation pendant une priode de deux ans partir de la date d'achat. Cette garantie est fournie par SR SUNTOUR Inc. au seul acheteur d'origine, sans possibilit de transfert une partie tierce. Tout recours en garantie devra tre effectu par l'intermdiaire du revendeur auprs duquel le vlo ou la fourche suspension SR SUNTOUR a t achet. La facture d'origine devra tre fournie en tant que preuve d'achat. LOIS LOCALES : Cette garantie vous donne certains droits lgaux particuliers. En effet, vous pouvez disposer de droits autres que ceux dcrits dans ces termes de garantie, en fonction de l'tat (USA), de la province (Canada) ou du pays dans lequel vous rsidez. Ces rglementations devront tre, en consquence, adaptes aux lois locales. LIMITES DE LA GARANTIE Cette garantie limite ne s'appliquera pas aux dfauts de la fourche de suspension provoqus par : une installation incorrecte, un dmontage ou remontage, des dommages intentionnels, des altrations ou des modifications de la fourche ou par une utilisation draisonnable, un abus du produit ou par toute utilisation non prvue, incident, accident de la route, entretien ou rparation mal ralis(s). L'obligation de cette garantie limite se limitera la rparation ou au changement de la fourche de suspension ou de toute autre pice subissant un dfaut matriel ou de main d'oeuvre, pendant une priode de deux ans. SR SUNTOUR n'accorde aucune garantie implicite ou explicite d'adaptation ou de commercialisation, part ce qui est mentionn ci-dessus. En aucun cas, SR SUNTOUR ne sera responsable pour les dommages accidentels ou indirects. Les dommages causs par l'utilisation de pices de rechange d'autres fabricants ou par l'utilisation de pices non compatibles ou non adaptes aux fourches suspension SR SUNTOUR ne sont en aucune manire couverts par cette garantie. Cette garantie ne couvre pas les conditions d'usure normale. PIECES D'USURE : Joints d'tanchit aux poussires Anneaux toriques Pices amovibles en caoutchouc Plongeurs Notez que les cartouches SR SUNTOUR sont couvertes par une garantie limite d'1 an ! Notez que les manchons et bagues coulissantes sont couvertes par une garantie limite de 6 mois !
16
Franais
SPIS TRECI................................................................................................................... 1 PRZEZNACZENIE........................................................................................................... 1 WANE INFORMACJE DOTYCZCE BEZPIECZESTWA............................................. 4 PRZED KAD JAZD!................................................................................................. 5 INSTALACJA WIDELCA................................................................................................. 5 INSTRUKCJA INSTALACJI............................................................................................. 5 INSTALACJA WIDELCA................................................................................................. 6 ODSTP OPONY !.......................................................................................................... 6 INSTALACJA DWIGNI ZDALNEJ BLOKADY SERIA AXON / SERIA EPICON / SERIA RAIDON RLD .......................................................................7 INSTALACJA DWIGNI ZDALNEJ BLOKADY RAIDONair RL....................................... 8 DWIGNIA ZDALNEJ REGULACJI SKOKU EPICON XC TAD / XC TAD 15QLC........................................................................................................ 10 SYSTEMY BLOKOWANIA............................................................................................ 11 REGULACJA TUMIENIA POWROTU.......................................................................... 11 FUNKCJA ZDALNEJ REGULACJI SKOKU EPICON XC TAD / XC TAD 15QLC.........................................................................................................12 SYSTEM QLOCK 15 mm.............................................................................................. 12 REGULACJA UGICIA WSTPNEGO........................................................................... 14 KONSERWACJA WIDELCA.......................................................................................... 14 OGRANICZONA GWARANCJA.................................................................................... 15 PRZEZNACZENIE
Kategoria AXON EPICON RAIDONair Koniecznie dobierz odpowiedni amortyzator do wysokoci ramy i wasnego stylu jazdy. Prosz zwrci uwag, e widelce serii AXON, EPICON i RAIDONair nie s przeznaczone do skokw, spadkw, ostrych zjazdw (tzw. downhill), jazdy typu freeride lub agresywnej jazdy miejskiej. Nieprzestrzeganie tych instrukcji moe prowadzi do usterki produktu, wypadku lub nawet mierci rowerzysty. Nieprzestrzeganie tych instrukcji prowadzi do uniewanienia gwarancji widelca! Freeride All Mountain (grskie) XC i Maraton DJ/Street
Polski
MAKSYMALNA REDNICA TARCZY [mm] SERIA AXON SERIA EPICON SERIA RAIDON air 185 185 185
Rura sterowa
A
Korona widelca
B
Rury goleni
E
Dolna obudowa
C
2
Haki na koa
D
4
3
Polski
Szybka Blokada Dwignia zdalnej Zawr blokada zdalna regulacji skoku powietrza 1 1 1 2 2 2 2 4 4 2 2 2 2 2 2 2 2 2
Polski
OSTRZEENIE!
Nieprzestrzeganie podanych ostrzee i instrukcji moe spowodowa uszkodzenie produktu, obraenia ciaa lub nawet mier rowerzysty.
Prosz uwanie przeczyta ten podrcznik przed rozpoczciem uytkowania widelca amortyzowanego. Bdne uytkowania widelca amortyzowanego moe spowodowa jego uszkodzenie, powane obraenia ciaa lub nawet mier rowerzysty. Widelce amortyzowane zawieraj pyny i gazy pod bardzo wysokim cinieniem, dlatego naley przestrzega ostrzee zawartych w niniejszym podrczniku, aby ograniczy ryzyko obrae lub mierci. Nigdy nie podejmuj prb otwarcia wkadu SRSUNTOUR, poniewa, tak jak opisano powyej, wkady zawieraj pyny i gazy pod wysokim cinieniem. Otwarcie wkadu SRSUNTOUR niesie ryzyko odniesienia powanych obrae. Uywaj tylko oryginalnych czci SRSUNTOUR. Uycie nieoryginalnych czci zamiennych lub wymiennikw powoduje utrat gwarancji widelca i moe spowodowa jego usterk. Moe to prowadzi do wypadku, obrae ciaa lub nawet mierci. Widelce amortyzowane SRSUNTOUR s przeznaczone do uytku przez jednego rowerzyst naraz. Niniejsza instrukcja zawiera wane informacje dotyczce poprawnej instalacji, obsugi technicznej i konserwacji widelca amortyzowanego. Poza tym, prosz zauway, e do zainstalowania, serwisowania i konserwacji widelcw amortyzowanych SRSUNTOUR konieczne s specjalne narzdzia i specjalistyczna wiedza. Oglna wiedza z zakresu mechaniki moe nie by wystarczajca do naprawy, serwisowania lub konserwacji amortyzatora. Z tego powodu zdecydowanie zalecamy zlecanie instalacji, serwisowania i/lub konserwacji widelca przeszkolonemu i odpowiednio wykwalifikowanemu mechanikowi rowerowemu. Bdna instalacja, serwisowanie lub konserwacja moe prowadzi do usterki produktu, wypadku, obrae ciaa a nawet mierci. Zawsze korzystaj z odpowiedniego wyposaenia ochronnego. Takie wyposaenie obejmuje poprawnie dopasowany i zapity kask rowerowy. W zalenoci od indywidualnego stylu jazdy, naley korzysta z dodatkowych zabezpiecze. Dopilnuj, by sprzt by w idealnym stanie. Koniecznie dobierz odpowiedni amortyzator do wysokoci ramy i wasnego stylu jazdy. Zamontowanie amortyzatora niedopasowanego do geometrii ramy moe prowadzi do jego usterki i spowoduje uniewanienie gwarancji. Zamontowanie amortyzowanego widelca zmienia geometri i charakterystyk prowadzenia roweru. Naucz si jedzi rowerem i wicz swoje umiejtnoci. Poznaj wasne ograniczenia i podczas jazdy nigdy nich nie przekraczaj. Podczas korzystania z baganika rowerowego zawsze cakowicie odpinaj szybkie zapicie. Bdnie odpite szybkie zapicia mog spowodowa zgicie, zamanie lub inne uszkodzenie strukturalne roweru podczas jego zdejmowania z baganika. Jeli rower spad z baganika, nie korzystaj z niego zanim nie zostanie sprawdzony przez odpowiednio wykwalifikowanego mechanika rowerowego. Podczas korzystania z baganika rowerowego, w ktrym rower jest mocowany tylko za pomoc zacinicia hakw na koa w widelcu, pamitaj by zamocowa rwnie tylne koo. Niedokadne przymocowanie tylnego koa moe prowadzi do szarpania roweru, co moe spowodowa zamanie hakw na koa. Prosz zwrci uwag, e amortyzowane widelce SRSUNTOUR nie s wyposaone w wiata odpowiednie do jazdy po drogach. Jeli zamierzasz jedzi rowerem po drogach publicznych lub ciekach rowerowych, sprzedawca powinien przymocowa odpowiednie wiata do widelca. Przeczytaj dokadnie ca dokumentacj doczon do roweru i zapoznaj si z czciami zamontowanymi w rowerze.
z r
s e
o r t
a g
Polski
Nie uywaj roweru, jeli nie jest spenione jedno z poniszych kryteriw testowych! Jazda rowerem bez usunicia wszystkich usterek lub przeprowadzenia koniecznych regulacji moe spowodowa wypadek, powane obraenia lub nawet mier.
Zauwaye pknicia, wgniecenia, wygicia, zgicia lub zuycie czci widelca amortyzowanego lub jakichkolwiek innych czci roweru? Jeli tak, skontaktuj si z przeszkolonym i odpowiednio wykwalifikowanym mechanikiem rowerowym w celu przeprowadzenia kontroli widelca lub roweru. Zauwaye, e z widelca wycieka olej? Sprawd rwnie niewidoczne miejsca, np. spd korony widelca. Jeli tak, skontaktuj si z przeszkolonym i odpowiednio wykwalifikowanym mechanikiem rowerowym w celu przeprowadzenia kontroli widelca lub roweru. cinij widelec, opierajc na nim ciar ciaa. Jeli widelec wydaje si dziaa zbyt mikko, aby uzyska odpowiednie UGICIE WSTPNE, zwiksz cinienie a do uzyskania odpowiedniej zalecanej wartoci. Skorzystaj rwnie z informacji z rozdziau REGULACJA UGICIA WSTPNEGO. Sprawd czy hamulce s odpowiednio zamontowane i wyregulowane i czy dziaaj poprawnie. To samo dotyczy pozostaych czci roweru, takich jak kierownica, peday, rami korby, rura podsiodowa, siodeko itp. Skorzystaj rwnie z instrukcji dostarczonych przed producentw pozostaych czci. Dopilnuj by koa roweru byy idealnie wycentrowane, aby nie stykay si z widelcem ani elementami ukadu hamulcowego. Jeli do mocowania k uywasz systemu szybkiego zwalniania, dopilnuj by wszystkie dwignie i nakrtki byy poprawnie ustawione. Jeli uywasz systemu mocowania przez o, dopilnuj by wszystkie ruby mocujce zostay dokrcone do odpowiedniego momentu obrotowego. Sprawd dugo linek i ich przebieg przez rne czci. Dopilnuj by linki nie utrudniay kierowania. Jeli korzystasz z owietlenia do jazdy drogowej, dopilnuj by wiata byy czyste i poprawnie zamontowane. Lekko podnie rower nad podoe i pu go, tak aby spad na koa, suchajc i patrzc, czy w rowerze nie ma adnych lunych czci.
INSTRUKCJA INSTALACJI
Uwaga! Wszystkie ruby mocujce naley dokrci do odpowiedniego momentu obrotowego dokrcania podanego przez producenta 1. Zdemontuj stary widelec z roweru. Nastpnie zdemontuj koron z widelca. 2. Porwnaj dugo rury sterowej starego widelca z dugoci rury sterowej widelca SRSUNTOUR. Widelce amortyzowane SRSUNTOUR s dostarczane z rur sterow ostandardowej dugoci 255 mm. Z tego powodu wymagane moe by przycicie rury sterowej na odpowiedni dugo.
Polski
3. Aby okreli poprawn dugo rury sterowej, mona zastosowa nastpujcy wzr: Gwka ramy + wysoko oysk sterowych (sterw) + podkadki dystansowe + wysoko zacisku mostka s clamp height 3 mm odstpu Ostrzeenie! Jeli widelec SRSUNTOUR zosta dostarczony z niegwintowan rur sterow, nie gwintuj jej. Rury sterowe widelcw SR SUNTOUR s mocowane fabrycznie na zacisk i ich zdjcie jest niemoliwe. Nie podejmuj prb wymiany oryginalnej rury sterowej na gwintowan rur sterow. Spowoduje to uniewanienie gwarancji widelca i doprowadzi do usterki produktu lub moe wywoa powane obraenia ciaa lub nawet mier rowerzysty. 4. Za koron sterw (30 mm do 1 1/8) mocno na grny koniec korony widelca. Zamontuj zesp widelca (stery, podkadki dystansowe, mostek) z powrotem na rowerze. Reguluj stery, aby cakowicie wyeliminowa wyczuwalny luz. Skorzystaj rwnie z instrukcji instalacji producenta sterw. Zamontuj hamulce zgodnie z instrukcj producenta. Pamitaj by dobrze wyregulowa klocki hamulcowe. Jeli korzystasz z hamulca tarczowego, zamontuj hamulec jedynie w oryginalnych otworach montaowych hamulca tarczowego. Korzystaj tylko z hamulcw typu cantilever przeznaczonych do uytku z podkow bez haka. Przeczytaj instrukcje instalacji producenta hamulca i dokadnie ich przestrzegaj. Dobierz odpowiedni dugo linki hamulca, tak aby linka nie przeszkadzaa w funkcjonowaniu widelca. Zamontuj koo z powrotem w rowerze. Jeli korzystasz z systemu szybkiego zwalniania do mocowania zespou koa, dopilnuj by wszystkie elementy mocujce i nakrtki byy odpowiednio ustawione (po dokrceniu nakrtki, nakrtka musi zakrywa cztery lub wicej gwintw). Jeli widelec jest wyposaony w system mocowania przez o, dopilnuj by wszystkie ruby mocujce zostay dokrcone do odpowiedniego momentu obrotowego. Skorzystaj rwnie z rozdziau dotyczcego Qloc w tym podrczniku.
5.
6.
ODSTP OPONY !
Ten amortyzowany widelec SR SUNTOUR jest przeznaczony do uytku z oponami o rozmiarze 26. Kada opona ma inn rednic zewntrzn (szeroko i wysoko opony). Dlatego naley sprawdzi odstp pomidzy opon a widelcem, aby dopilnowa, by opona nie stykaa si z adn czci widelca. Pamitaj, e najwsza cz widelca znajduje si przy piwotach. Jeli chcesz zdj koo, konieczne moe by spuszczenie powietrza z opony, aby umoliwi przeoenie koa przez piwoty.
Polski
AXON / EPICON / RAIDON air SERIA AXON SERIA EPICON SERIA RAIDON RLD
3 mm 1,5 Nm
Przeprowad link przez zatyczk zewntrznej obudowy i przez otwr osony. Napnij lekko link i dokr j przy uyciu klucza imbusowego 2 mm.
2mm 0,5 Nm
Przytnij link na odpowiedni dugo, aby nadal miecia si w przesuwanej karetce. PRZETNIJ 7mm 7
Polski
Te ilustracje przedstawiaj zdaln blokad w pooeniu OTWARTA. Idealnie przycity kable nadal mieci si w przesuwanej karetce.
Za plastikow oson na miejsce przy pomocy klucza imbusowego 2,5 mm. Lekko j dokr. 2,5 mm 0,5 Nm
Jeli widelec si nie blokuje, prawdopodobnie napicie linki jest za sabe. Wtakim wypadku naley zwikszy napicie linki przekrcajc tulej regulacyjn przeciwnie do ruchu wskazwek zegara. Jeli napicie linki jest zbyt due i odblokowanie widelca jest niemoliwe, naley przekrci tulej regulacyjn zgodnie z ruchem wskazwek zegara.
PRZEKR
Tuleja regulacyjna
RAIDONair RL
pico n
z ilu Patr
stra
cj
E on i a Ax
ZDEJMIJ
Polski
Przeprowad link przez zatyczk zewntrznej obudowy i przez otwr osony. Napnij lekko link i dokr j przy uyciu klucza imbusowego 1,5 mm.
1,5 mm 0,5 Nm
ZACZEP
Przytnij link na odpowiedni dugo. Zalecamy dugo okoo 12 mm. PRZETNIJ 12 mm Zamontuj nakadk na kocwk linki na kocu przecitej linki przy pomocy kombinerek z wskimi kocwkami.
Polski
PRZEKR
Tuleja regulacyjna
1,5 mm 0,5 Nm
Przeprowad link przez zatyczk zewntrznej obudowy i przez zacisk linki. Napnij lekko link i zamocuj j przy uyciu klucza imbusowego 2 mm
1,5 mm 0,5 Nm
Przytnij link na odpowiedni dugo. Zalecamy dugo okoo 12 mm. PRZETNIJ 12 mm Zamontuj nakadk na kocwk linki na kocu przecitej linki przy pomocy kombinerek z wskimi kocwkami.
10
Polski
Funkcja blokowania widelca SRSUNTOUR jest przeznaczona do zmniejszania chwiania si roweru (pompowania) podczas jazdy, gdy rowerzysta nie siedzi na siodeku lub podczas podjazdw. Widelec nie zostanie zablokowany w 100%. Nadal pozostanie skok wynoszcy kilka milimetrw konieczny dla dziaania naszego systemu odblokowujcego widelec -Anti-Blow-Off-System. Ten system chroni rowerzyst, jeli zapomni on odblokowa widelec po wjechaniu na trudny teren. Mimo tego nigdy nie naley blokowa widelca podczas jazdy w trudnym terenie, zjazdw lub skokw. Niesie to ryzyko uszkodzenia widelca spowodowanego jego ciniciem pod duym obcieniem. Moe to rwnie prowadzi do wypadku, obrae ciaa lub nawet mierci rowerzysty. Wszystkie modele EPICON LOD & LO RAIDONair LOD & LO Aby odblokowa widelec, przekr pokrto Szybka blokada o 90 przeciwnie do ruchu wskazwek zegara. Wszystkie modele AXON RLD & RL EPICON RLD & RL RAIDONair RLD & RL Aby zablokowa widelec, naley pchn Dwigni zdalnej blokady w kierunku kierownicy. Aby odblokowa widelec, naley nacisn niebieski przycisk zwalniajcy.
90
PRZEKR
Pokrto regulacji
11
Polski
Funkcja regulacji skoku widelca pozwala na zmian skoku widelca w zakresie 40 mm. Regulacja skoku widelca SRSUNTOUR jest pynna, dziki czemu mona wybra dowolny skok mieszczcy si w zakresie od maksymalnej do minimalnej wartoci. Wkad regulacji skoku wsppracuje z ukadem pneumatycznym. Po zmianie skoku powietrze przechodzi z jednej komory do drugiej. Zwykle zawr powietrza (regulator cinienia powietrza) znajduje si po prawej stronie korony widelca. Zuwagi na zastosowanie ukadu regulacji skoku, nakrtka zaworu powietrza znajduje si przy dolnym kocu dolnej obudowy.
Nacinij
cinij widelec
Nacinij dwigni regulacji skoku w d i przytrzymaj j w tym pooeniu. cinij widelec. Pu dwigni. Zdejmij nacisk z widelca.
SYSTEM QLOCK 15 mm
2. WYREGULUJ
1. WSU
12
TRZASK!
Polski
4. ZAMKNITE
NACIN
NACI IJ
N IJ
Niezalecany ksztat Ograniczona funkcjonalno Krawdzie w piacie mog powodowa zacinanie si osi
IJ
NIJ
NACI
3. ZAMKNIJ
1. ZAMKNITE
ZAMKN
OTW
RZ
2. OTWARTE
3. NACINIJ + PCHNIJ
4. WYCIGNIJ
NIJ
NACI
13
Polski
UGICIE WSTPNE to warto ugicia amortyzatora spowodowana jedynie ciarem ciaa rowerzysty w pozycji do jazdy przed jej rozpoczciem. Kady rowerzysta ma inn wag i inn pozycj do jazdy, dlatego warto ugicia wstpnego widelca moe by wiksza lub mniejsza. Aby zapewni poprawne dziaanie widelca i nie zmniejszy jego wydajnoci, naley ustawi odpowiednie cinienie powietrza. Jedynym sposobem okrelenia odpowiedniego cinienia dla widelca jest ustawienia poprawnego UGICIA WSTPNEGO. Skok 80 mm 100 mm 120 mm 140 mm UGICIE WSTPNE w% UGICIE WSTPNE wmm Modele AXON EPICON RAIDON air MAKSYMALNE MAKSYMALNE CINIENIE CINIENIE POWIETRZA POWIETRZA [psi] [bar] 165 180 180 11,4 12,4 12,4
15 % 20 % 12 mm 16 mm 15 % 20 % 15 mm 20 mm 15 % 20 % 18 mm 24 mm 20 % 25 % 28 mm 35 mm
40 50 60 70 80 90 100
40 50 60 70 80 90 100
10
10
10
20 30 40 50 60 70 80 90 100
PLASTIKOWA ZAPINKA
20 30
20
30
PLASTIKOWA ZAPINKA
UGICIE WSTPNE
PLASTIKOWA ZAPINKA
ZSID Z ROWERU I ZMIERZ ODLEGO POMIDZY PLASTIKOW ZAPINK AUSZCZELK PRZECIWPYOW!
KONSERWACJA WIDELCA
Konstrukcja widelcw SRSUNTOUR sprawia, e s one prawie bezobsugowe. Jednake, jeli czci ruchome s naraone na wpyw wilgoci i zanieczyszcze, wydajno widelca moe spa po kilku przejazdach. Aby zachowa doskonae osigi, bezpieczestwo i trwao widelca, naley regularnie przeprowadza konserwacj. Prosz pamita, e niewykonywanie konserwacji widelca zgodnie z instrukcjami konserwacji powoduje utrat gwarancji widelca! Nigdy nie uywaj myjki cinieniowej ani wody pod cinieniem do czyszczenia widelca, poniewa woda moe dosta si do widelca przez uszczelki przeciwpyowe. Zalecamy przeprowadzanie konserwacji widelca czciej ni podano poniej w przypadku jazdy w bardzo trudnych warunkach pogodowych i terenowych (np. zim). Zawsze po zauwaeniu, e praca widelca ulega pogorszeniu lub jakiejkolwiek zmianie, naley niezwocznie skontaktowa si ze sprzedawc w celu przeprowadzenia kontroli widelca.
14
Polski
co 50 h
co 100 h
1 SERWIS: Kontrola dziaania widelca/czyszczenie i nasmarowanie tulei/smarowanie linki i obudowy zdalnej blokady/kontrola wartoci momentu obrotowego (dokrcenia)/kontrola cinienia powietrza/sprawdzenie widelca pod ktem rys, wgniece, pkni, zgi lub oznak zuycia. 2 SERWIS: 1 serwis + demonta/czyszczenie caego widelca/nasmarowanie uszczelek przeciwpyowych i wycierakw oleju/nasmarowanie grnych pokrywek zdalnej blokady iregulacji skoku/uszczelnienie grnych pokrywek zaworu powietrza poprzez nasmarowanie/ kontrola pod ktem przeciekw powietrza/kontrola wartoci momentu obrotowego (dokrcenia)/dostosowanie do osobistych preferencji rowerzysty.
OGRANICZONA GWARANCJA
SRSUNTOUR gwarantuje, e amortyzowane widelce s pozbawione usterek materiaowych i produkcyjnych. Okres gwarancji wynosi dwa lata od daty zakupu. Gwarancja obejmuje normalne uytkowanie produktu. Niniejszej gwarancji SRSUNTOUR Inc. udziela wycznie pierwszemu wacicielowi. Gwarancji nie mona przekazywa stronom trzecim. Roszczenia gwarancyjne naley skada w punkcie sprzeday, w ktrym zakupiono rower lub widelec amortyzowany SRSUNTOUR. Aby udowodni fakt dokonania zakupu, naley przedstawi rachunek. PRAWO KRAJOWE: Niniejsza gwarancja udziela uytkownikowi okrelonych praw. W zalenoci od miejsca zamieszkania, uytkownik moe posiada inne prawa nie omwione w tej gwarancji, wynikajce z prawa krajowego. Zapisy niniejszej gwarancji musz by stosowane zgodnie z przepisami prawa krajowego. OGRANICZENIE GWARANCJI Niniejsza ograniczona gwarancja nie obejmuje usterek widelca amortyzowanego spowodowanych przez: bdn instalacj, demonta i ponowny monta, celowe uszkodzenie, zmiany lub modyfikacje widelca, nierozsdne uycie lub naduycie produktu lub uycie produktu niezgodnie zjego przeznaczeniem, wypadki, zderzenia, bdn konserwacj i le przeprowadzone naprawy.
15
Polski
Zobowizania wynikajce z tej ograniczonej gwarancji s ograniczone do naprawy i wymiany widelca amortyzowanego lub dowolnej jego czci, w ktrej wykryto usterk materiaow lub produkcyjn w okresie dwch lat od zakupu. SRSUNTOUR nie udziela adnych wyraonych ani domniemanych gwarancji przydatnoci, za wyjtkiem powyszych zapisw. SRSUNTOUR w adnym wypadku nie ponosi odpowiedzialnoci za szkody uboczne ani straty wtrne. Szkody spowodowane uyciem czci zamiennych innych producentw lub szkody spowodowane uyciem czci niezgodnych z widelcami amortyzowanymi SRSUNTOUR lub dla nich nieodpowiednich nie s objte niniejsz gwarancj. Ta gwarancja nie obejmuje normalnego zuycia. CZCI ULEGAJCE ZUYCIU: Uszczelki przeciwpyowe Piercienie uszczelniajce Gumowe czci ruchome Rury goleni
Prosz zwrci uwag, e wszystkie wkady SRSUNTOUR s objte ograniczon roczn gwarancj! Prosz zwrci uwag, e wszystkie tuleje i piercienie lizgowe s objte ograniczon proczn gwarancj!
16
Polski
Espaol
Tubo gua
A
Corona de horquilla
B
Tubos del montante
E
Estuche inferior
C
2
Resalto
D
4
3
Espaol
VALORES DEL PAR DE TORSIN (todos los valores que incluyen una tolerancia de 10%)
Modelo AXON RLD / RLD 15QLC EPICON RLD / RLD 15QLC EPICON RL / RL QLC15 EPICON LOD / LOD QLC15 EPICON XC TAD EPICON XC TAD 15QLC EPICON RLD 15QLC 29 EPICON LOD 15QLC 29 RAIDON RLD 15QLC air RAIDON LOD 15QLC air RAIDON RLD / LOD air RAIDON LO air RAIDON RLD 15QLC 29 air RAIDON LOD 15QLC 29 air A 10Nm 10Nm 10Nm 10Nm 10Nm 10Nm 10Nm 10Nm 10Nm 10Nm 10Nm 10Nm 10Nm 10Nm B 10Nm 10Nm 10Nm 10Nm 10Nm 10Nm 10Nm 10Nm 10Nm 10Nm 10Nm 10Nm 10Nm 10Nm C 6Nm 6Nm 10Nm 6Nm 6Nm 6Nm 6Nm 6Nm 6Nm 6Nm 6Nm 10Nm 6Nm 6Nm D 4Nm 10Nm 10Nm 10Nm 10Nm 10Nm 10Nm 10Nm 10Nm 10Nm 10Nm 10Nm 10Nm 10Nm 7Nm 7Nm 3 E 7Nm 7Nm 7Nm 7Nm 7Nm
Espaol
De no cumplir con las advertencias o de no seguir las instrucciones podra ocasionar daos en el producto, lesiones o incluso la muerte del ciclista.
Asegrese de leer cuidadosamente este manual antes de utilizar la horquilla de suspensin. El uso incorrecto de la horquilla de suspensin podra ocasionar daos en el producto, lesiones serias o incluso la muerte del ciclista. Las horquillas de suspensin contienen fluidos y gases bajo extrema presin, se deben seguir las advertencias incluidas en este manual para reducir la posibilidad de lesiones o de muerte. Nunca intente abrir ningn cartucho SR SUNTOUR, ya que como se coment anteriormente contienen fluidos y gases a alta presin. Al abrir algn cartucho SR SUNTOUR implica el riesgo de lesionarse severamente. Utilice solamente piezas genuinas SR SUNTOUR. El uso de reemplazos y de piezas de repuesto de otras marcas invalidar la garanta de la horquilla y podra ocasionar fallos en la misma. Esto podra resultar en accidentes, lesiones o incluso la muerte. Las horquillas de suspensin SR Suntour estn diseadas para el uso de un solo ciclista. Esta hoja de instrucciones contiene informacin importante acerca de la correcta insta lacin, servicio y mantenimiento de la horquilla de suspensin. No obstante, debe estar informado que se requiere de conocimientos especiales y de herramientas esenciales para instalar y para el servicio y mantenimiento de las horquillas SR SUNTOUR. El conocimiento mecnico comn puede no ser suficiente para reparar ni para el servicio y mantenimiento de una horquilla de suspensin. Por lo tanto le recomendamos que instale la horquilla, realice el servicio y/o mantenimiento con la ayuda de un mecnico calificado especializado en bicicletas. La instalacin, el servicio o el mantenimiento realizados incorrectamente pueden resultar en fallos del producto, accidentes, lesiones oincluso la muerte. Siempre debe contar con un equipo de proteccin adecuado. Esto incluye la colocacin correcta y bien ajustada del casco. De acuerdo a su estilo de montar deber utilizar proteccin de seguridad adicional. Asegrese de que su equipo se encuentre en perfectas condiciones. Asegrese de seleccionar la horquilla correcta de acuerdo a la fabricacin de su cuadro en cuanto a altura y a su estilo personal de montar en la bicicleta. La instalacin de una horquilla que no sea de la misma geometra que la de su cuadro podra resultar en fallos en la misma horquilla e invalidar la garanta de las horquillas. La instalacin de una horquilla de suspensin cambiar la geometra y el control de su bicicleta. Aprenda como andar en bicicleta y entrene para mejorar sus habilidades. Conozca sus limites ynunca los sobrepase al andar en bicicleta. Al utilizar un rack para bicicleta siempre libere totalmente el sujetador de cierre rpi do. Los dispositivos de cierre rpido incorrectamente desabrochados podra resultar en curvaturas, rompimientos u otros daos estructurales al quitar la bicicleta del rack de transporte. Si su bicicleta se cae del rack no la monte, hasta que haya sido inspeccionada por un mecnico de bicicletas calificado. Al utilizar un rack para bicicleta que solamente asegura la bicicleta con abrazaderas en los resaltos de la horquilla, asegrese de sujetar la rueda trasera tambin. Una rueda trasera no sujetada correctamente podra hacer que la bicicleta se zangolotee haciendo que los resaltos se rompan. Tenga en cuenta que las horquillas de suspensin SR SUNTOUR no vienen con los reflectores adecuados para montar en carretera. Si intenta montar en carreteras pblicas o en carriles para bicicleta su distribuidor deber montar los reflectores requeridos para su horquilla. Estudie todos los manuales del propietario proporcionados con su bicicleta y familiar cese con los componentes montados en su bicicleta.
ADVERTENCIA!
c e
u a
i c
Espaol
Ha notado grietas, abolladuras, curvaturas o piezas tiznadas en la horquilla de suspensin o en cualquier otra pieza de su bicicleta? Si es as, consulte con un mecnico de bicicletas capacitado y calificado para inspeccionar la horquilla o la bicicleta. Nota algn derrame de aceite fuera de la horquilla? Tambin inspeccione las reas ocultas como la parte inferior de la corona de la horquilla. Si es as, consulte con un mecnico de bicicletas capacitado y calificado para inspeccionar la horquilla o la bicicleta. Comprima la horquilla con el peso de su cuerpo. Si se siente demasiado suave, en relacin con la presin correcta para lograr un SAG preciso, nflela hasta que logre obtener el valor requerido. Consulte tambin el captulo AJUSTE DE SAG. Asegrese que los frenos se encuentren correctamente instalados/ajustados y que funcionen correctamente. Esto tambin aplica para cada pieza de su bicicleta como el manillar, los pedales, los brazos del pin, el poste del asiento, silln etc. Tambin consulte los
INSTALACIN DE HORQUILLA
ADVERTENCIA!
SR SUNTOUR recomienda fuertemente que su horquilla sea instalada por un mecnico de bicicletas capacitado y cualificado. Se requiere de capacitacin especial y de herramientas esenciales para instalar las horquillas SR SUNTOUR. El conocimiento mecnico comn puede no ser suficiente para instalar una horquilla de suspensin SR SUNTOUR. Si pretende instalar la horquilla usted mismo, todo el trabajo debe ser inspeccionado por un mecnico de bicicletas capacitado y cualificado. Tenga en cuenta, que las horquillas instaladas incorrectamente son extremadamente peligrosas y pueden ocasionar daos en el producto, lesiones serias o incluso la muerte.
INSTRUCCIONES DE INSTALACIN
Nota! 1. 2. Todos los pernos de fijacin tienen que apretarse con el par de torsin correcto establecido por los fabricantes Quite la horquilla existente de la bicicleta. Enseguida quite la corredera de la corona de la horquilla. Mida la longitud del tubo gua de la horquilla usada contra la longitud del tubo de la horquilla SR SUNTOUR. Las horquillas de suspensin SR SUNTOUR se entregan con una longitud del tubo gua estndar de 255 mm. Por lo tanto tal vez sea necesario cortar el tubo gua en la longitud correcta.
Espaol
Tubo superior del cuadro + Altura de la montura del cabezal + Espaciadores + Altura de la abrazadera del vstago 3 mm de espacio ADVERTENCIA! Si su horquilla SR SUNTOUR viene con un tubo gua sin rosca, no agregue ninguna. Las guas de la horquilla SR SUNTOUR se colocan a travs de un sistema de prensado de una sola vez lo cual no se puede quitar. No intente cambiar el tubo gua por un tubo con una gua roscada. Esto invalidar la garanta de la horquilla y resultar en fallos del producto o puede ocasionar lesiones fatales o incluso la muerte del ciclista. 4. Instale la corredera de la corona del cabezal (30 mm para 1 1/8") firmemente en la parte superior de la corona de la horquilla. Vuelva a instalar la unidad de la horquilla (cabezal, espaciadores, vstago) en la bicicleta. Ajuste el cabezal de forma que no exista holgura. Tambin consulte las instrucciones de instalacin del fabricante. Instale los frenos de acuerdo a las instrucciones del fabricante. Asegrese de ajustar las zapatas del freno correctamente. Si utiliza un freno de disco, solamente mntelo en los orificios de montaje originales del freno. Solamente utilice frenos cantilever los cuales se van a utilizar con un puente sin percha. Verifique las instrucciones de instalacin del fabricante del freno y sgalas al pie de la letra. Asegrese de seleccionar la longitud correcta para el cable del freno para no interferir en el desempeo de la horquilla. Vuelva a instalar la rueda en su bicicleta. Si utiliza un sistema de cierre rpido para sujetar el juego de rueda, asegrese de ajustar todos los sujetadores y las tuercas correctamente (cuatro o ms roscas tienen que quedar aseguradas en la tuerca al cerrarla). En caso de que la horquilla venga con un sistema de eje pasante, asegrese de que todos los pernos de fijacin se encuentren apretados con los valores de par de torsin correctos. Tambin consulte la seccin Qloc de este manual.
5.
6.
Nota! El utilizar un neumtico que exceda el tamao mximo adecuado para su horquilla es muy peligroso y podra ocasionar un accidente, lesiones fatales oincluso la muerte en el ciclista. 1. Libere todo el aire de la horquilla. 2. Comprima completamente la horquilla. 3. Mida la distancia entre la parte superior de su neumtico y la inferior de la corona. Asegrese de que el espacio no sea menor a 10 mm! El exceder el tamao mximo del neumtico ocasionar que ste se atore en la parte inferior de la corona al comprimir completamente la horquilla. 4. Infle nuevamente la horquilla. Tenga en mente que si utiliza un guardafangos se ver limitado el espacio! Repita otra vez la Prueba de espacio libre del neumtico para asegurarse de que el espacio sea lo suficientemente grande. Cada vez que vaya a cambiar los neumticos tiene que repetir nuevamente la prueba!
Espaol
3 mm 1,5 Nm
Quite la tapa de plstico utilizando una llave Allen de 2,5 mm. 2,5 mm
Desatornille el perno de fijacin del cable utilizando una llave Allen de 2 mm. 2,0 mm
Pase el cable por el obturador de la funda exterior y por el orificio del tapn de cierre. Tense ligeramente el cable y apritelo utilizando una llave Allen de 2 mm.
2 mm 0,5 Nm
Corte el cable a la longitud correcta para asegurarse de que quedar en el carro de deslizamiento. CORTE 7 mm 7
Espaol
Estas imgenes muestran la unidad de bloqueo remoto en la posicin ABIERTA. El cable se corta perfectamente, an queda en el carro de deslizamiento.
Vuelva a colocar la tapa de plstico utilizando una llave Allen de 2,5 mm. Apritela ligeramente. 2,5 mm 0,5 Nm
Si la horquilla no se bloquea, la tensin del cable probablemente sea demasiado baja. En este caso tiene que incrementar la tensin del cable girando en sentido antihorario el casquillo de ajuste. Si la tensin del cable es demasiado alta y la horquilla no se desbloquea, tendr que girar el casquillo de ajuste en sentido horario.
GIRAR
Casquillo de ajuste
RAIDONair RL
on Epic
la sulte Con
ima
gen
xo de A
n&
QUITAR
Espaol
Desatornille el perno de fijacin del cable utilizando una llave Allen de 1,5 mm. 1,5 mm
Pase el cable por el obturador de la funda exterior y por el orificio del tapn de cierre. Tense ligeramente el cable y apritelo utilizando una llave Allen de 1,5 mm.
1,5 mm 0,5 Nm
COLOCAR
Corte el cable en la longitud correcta. Se recomienda cortar a aproximadamente 12mm. CORTE 12 mm Instale una tapn de cierre de cable en el extremo del cable que se cort utilizando unas pinzas.
Espaol
GIRAR
Casquillo de ajuste
Casquillo de ajuste
1,5 mm 0,5 Nm
Pase el cable por el obturador de la funda exterior y a travs de la abrazadera del cable. Tense ligeramente el cable y sujtelo utilizando una llave Allen de 2 mm.
1,5 mm 0,5 Nm
Corte el cable en la longitud correcta. Se recomienda cortar a aproximadamente 12 mm. CORTE 12 mm Instale una tapn de cierre de cable en el extremo del cable cortado utilizando unas pinzas.
10
Espaol
90
Todos los modelos AXON RLD & RL EPICON RLD & RL RAIDONair RLD & RL Para bloquear la horquilla tiene que empujar la Palanca Remote-Lock hacia el manillar. Para desbloquear tiene que presionar el botn de liberacin azul.
GIRAR
EPICON RLD & LOD RAIDONair RLD & LOD Para incrementar la velocidad de rebote de su horquilla tiene que girar la perilla del ajustador en sentido antihorario. Para disminuir la velocidad tiene que girarla en sentido horario.
11
Espaol
La funcin de ajuste de recorrido le permite cambiar el recorrido de su horquilla en un rango de 40mm. El ajuste de recorrido de la SR SUNTOUR funciona sin etapas, por lo tanto puede seleccionar cada recorrido en un nivel intermedio entre el mximo y mnimo de la horquilla. El cartucho de ajuste de recorrido por si mismo funciona con un sistema neumtico. Al cambiar el recorrido el aire ser transferido de una cmara a otra. Usualmente la vlvula de aire (ajuste de la presin de aire) se encuentra en el lado derecho de la corona de la horquilla. Debido al sistema de ajuste de recorrido, la tapa de la vlvula de aire se asienta en el extremo inferior del estuche inferior.
Presionar
Compresin de horquilla
Presione la palanca de ajuste de recorrido hacia abajo y mantngala ah. Comprima la horquilla. Suelte la palanca nuevamente. Descargue la horquilla.
SISTEMA QLOCK 15 mm
1. INSERTAR
12
2. AJUSTAR
CLIC!
Espaol
4. CERRADO
ESION PR
PRES E ION PR
Forma no recomendada Funcin limitada Los bordes dentro del buje pueden ocasionar que el eje quede atorado
ON ESI E
3. CERRAR
1. CERRADO
3. PRESIONE + EMPUJE
CERRA
AB
2. ABRIR 4. EXTRAIGA
Espaol
R RI
13
40 50 60 70 80 90 100
40 50 60 70 80 90 100
10
10
BRIDA
BRIDA
MANTENIMIENTO DE LA HORQUILLA
Las horquillas SR SUNTOUR se encuentran diseadas para estar casi sin mantenimiento. Sin embargo, tan pronto como las piezas mviles se expongan a la humedad y a la contaminacin, el desempeo de la horquilla podra verse reducido despus de haber montado la bicicleta varias veces. Para mantener el alto desempeo, la seguridad y durabilidad de la horquilla, se requiere de un mantenimiento peridico. Tenga en mente que una horquilla que no reciba el servicio de mantenimiento de acuerdo a las instrucciones proporcionadas perder su garanta! Nunca utilice una pistola de presin o cualquier otro tipo de dispositivo de limpieza con agua a presin para limpiar su horquilla ya que el agua se podra introducir en la horquilla al nivel del guardapolvo. 14
Espaol
10
20 30 40 50 60 70 80 90 100
BRIDA
20 30
20
30
MANTENIMIENTO DE LA HORQUILLA
Programa de mantenimiento limpiar los tubos del montante y los guardapolvos inspeccionar que no existan rayones en los tubos superiores inspeccione que los pernos de fijacin principales tengan el par de apriete correcto (Nm) verifique la presin de aire engrase los guardapolvos con aceite de tefln (por ejemplo, Brunox Fork Deo) servicio 1 (con el distribuidor) servicio 2 (con el distribuidor) SERVICIO 1: Inspeccin de las funciones de la horquilla / limpieza y engrase de los cojinetes / lubricacin del cable y de la carcasa del bloqueo remoto / inspeccin de los valores del par de apriete / inspeccin de la presin de aire / inspeccin de que no existan rayones, abolladuras, grietas, curvaturas o piezas tiznadas en la horquilla. SERVICIO 2: Servicio 1 + desensamble / limpieza de la horquilla por completo / lubricacin de los guardapolvos y anillos / engrase de las tapas del bloqueo remoto y de la parte superior de ajuste de recorrido / sellado de las tapas de la parte superior de la vlvula de aire engrasndolas / inspeccin de fugas de aire / inspeccin de los valores del par de apriete / ajuste de acuerdo a las preferencias personales del ciclista. Despus de cada uso Cada 25 h Cada 50 h Cada 100 h
15
Espaol
Espaol
www.srsuntour-cycling.com www.srsuntour-tuning-base.com
August 2009
SR SUNTOUR HEADQUARTER SR SUNTOUR INC. #7 Hsing Yeh Rd Fu Hsing Industrial Zone Chang Hua Taiwan, R.O.C. Tel.: +886 4 7695115 Fax: +886 4 7694028 email: orders@srsuntour.com.tw SR SUNTOUR EUROPE SR SUNTOUR EUROPE GMBH Am Marschallfeld 6a 83626 Valley Germany Tel.: +49 8024 473 99 0 Fax: +49 8024 4730984 email: service@srsuntour-cycling.com SR SUNTOUR USA SR SUNTOUR USA 503 Columbia Street, Vancouver, WA 98660 USA Tel.: +1 (360) 737 6450 Fay: +1 (360) 60 737 6452 email: service@usulcorp.com