The document describes an automatic deceleration system for a group 3 piece of work equipment. The system reduces the engine speed to 1000rpm if all control levers are neutral for at least 4 seconds, lowering fuel consumption and noise during non-operation. Pressing the switch or operating any lever returns the engine speed to its previous level within a second. The system can also be deactivated so the engine speed is not reduced even if levers are neutral.
The document describes an automatic deceleration system for a group 3 piece of work equipment. The system reduces the engine speed to 1000rpm if all control levers are neutral for at least 4 seconds, lowering fuel consumption and noise during non-operation. Pressing the switch or operating any lever returns the engine speed to its previous level within a second. The system can also be deactivated so the engine speed is not reduced even if levers are neutral.
The document describes an automatic deceleration system for a group 3 piece of work equipment. The system reduces the engine speed to 1000rpm if all control levers are neutral for at least 4 seconds, lowering fuel consumption and noise during non-operation. Pressing the switch or operating any lever returns the engine speed to its previous level within a second. The system can also be deactivated so the engine speed is not reduced even if levers are neutral.
The document describes an automatic deceleration system for a group 3 piece of work equipment. The system reduces the engine speed to 1000rpm if all control levers are neutral for at least 4 seconds, lowering fuel consumption and noise during non-operation. Pressing the switch or operating any lever returns the engine speed to its previous level within a second. The system can also be deactivated so the engine speed is not reduced even if levers are neutral.
If all the work equipment control levers including swing and travel levers are at neutral for at least 4 seconds, CPU controller transmits the throttle command to ECM to reduce the engine speed to 1000rpm. As the result of reducing the engine speed, fuel consumption and noise are effectively cut down during non-operation of the control levers. When the Auto decel lamp is turned off by pressing the switch or any control lever is operated, the reduced engine speed rises upto the speed set before deceleration in a second.
45075MS05
2. WHEN AUTO DECEL LAMP OFF
The engine speed can be set as desired using the engine speed switch, and even if the control levers are neutral, the engine speed is not reduced. Auto decel function can be activated when accel dial position is over 4.