Professional Documents
Culture Documents
Elektrode Jesenice Katalog
Elektrode Jesenice Katalog
WELDING CONSUMABLES
d.o.o.
TRADITION Our history and tradition goes back to the year 1939, since that time at Jesenice location welding material is developed and produced. Now about 200 experienced employees care for
QUALITY Our philosophy is the customer satisfaction and production of high quality products, so we in 1997 got quality management system approval ISO 9001. Our production facilities are continuously checked and approved by Internacional Supervisory Institutions TV, DB and many Classification societies: GL, BV, ABS, LR, RS, DNV, RINA, PRS, SZU, CR and S. All metallic and mineral materials for the production of Elektrode Jesenice products are under strict control and all welding materials produced in our company are tested. Manufacturing certificates are available on request.
SERVICE Today we supply to more than 500 constant customers from 25 countries. Long experiences enables Electrode to offer you a comprehensive know-how about of welding.
www.elektrode.si
d.o.o.
CONTENTS
d.o.o.
PRODUCT PROGRAMME
EN ISO AWS A-5.1 / A-5.5* / E 6020 E 6010 E 7010-G E 7010-A1* E 8010-G * E 9010-G* E 6013 E 6012 E 6013 E 6013 E 6013 E 6013 E 6013 E 6013 E 6013 E 6013 E 6013 E 6013 E 7024 E 7024 E 7024 E 7024 E 7024 E 7024 E 7028 E 7027 E 7018 E 7018-1 E 7016 E 7016 E 6018 E 7016 E 7016 E 7016 A-5.5 E 8018-G E 9018-G E 8018-C3 E 7018-G E 7018-G E 8018-G E 9016-G E 8018-C1 E 9018-G ~E10018-G E 10018-G ~E 11018 G E 11018-G E 12018-G E 12018-G A1 A2 A3 A4 A5 A6 A7 A8 A9 A10 A11 A12 A13 A14 A15 A16 A17 A18 A19 B1 B2 B3 B4 B5 B6 B7 B8 C1 C2 C3 C4 C5 C6 C7 C8 Page
PRODUCT
2560-A 2560-B Low alloyed cellulosic, rutile and acid electrodes NEUTRAL E 35 AA 13 E 43 40 A RAPID E 38 2 R A 13 E 43 20 A CELEX E 35 2 C 21 ~E 43 10 A CELEX Mn E 42 3 C 21 ~E 49 10 A CELEX Mo E 42 3 Mo C 21 ~E 49 10 A CELEX Ni E 46 3 1NiC 21 ~E 55 10-N1 A CELEX NiMo E 50 3 1NiMo C 21 ~E 57 10-N2M3 A JADRAN S E 35 0 RC 11 E 43 13 A RUTILEN 12 E 38 0 RC 11 E 43 12 A RUTILEN Z E 42 0 RC 11 E 49 13 A RUTILEN 1000 S E 42 0 RC 11 E 49 13 A EMONA E 35 2 RB 12 E 43 03 A RUTILEN 13 E 42 0 RR 12 E 49 12 A RUTILEN X E 42 0 RR 12 E 49 13 A RUTILEN 2000 S E 42 0 RR 12 E 49 13 A RUTILEN K E 38 2 R 12 E 43 13 A RUTILEN 13 M E 38 0 R 12 E 43 12 A RUTILEN S E 38 0 RC 11 E 43 13 A RUTILEN E E 42 0 RC 11 ~E 49 13 A High efficiency electrodes SAVA 130 E 38 0 RR 33 E 43 24 A SAVA 150 E 38 0 RR 53 E 43 24 A SAVA 180 E 42 0 RR 74 E 49 24 A SAVA 200 E 42 0 RR 74 E 49 24 A SAVA GV 130 E 38 0 RR 34 E 43 24 A SAVA GV 160 E 38 0 RR 54 E 43 24 A SAVA 150 B E 42 2 B 53 E 49 28 A SAVA 150 AR E 42 4 RA 53 E 49 27 A Basic, low hydrogen electrodes EVB 50 E 42 4 B 32 H 5 E 49 18 A EVB 55 E 42 6 B 32 H5 E 49 18-P1 A EVB EXTRA E 42 6 B 12 H10 E 49 A6-P1 A EVB 45 E 42 2 B 32 H5 E 49 18-P1 A EVB 47 E 38 2 B 32 H5 E 43 18 A EVB S E 42 4 B 12 H10 E 49 16 A GALEB 50 E 42 2 B 32 H5 E 49 16 A EVB K E 42 2 B 12 H5 ~E 49 16-P1 H5 2560-A / 18275-A* 2560-B / 18275-B* Medium alloyed basic electrodes for welding finegrained steels EVB 60 E 50 4 Mo B 42 H5 ~E 57 18-3M2 A EVB 65 E 55 6Mn1NiMo B42H5* / EVB Ni E 50 61 Ni B 42 H5 ~E 55 16-3N3 A EVB CuNi E 46 4 ZB 42 H5 E 49 16-NC A EVB CuNiCr E 46 4 Z B 42 H5 E 49 16-NCC1 A EVB NiMo E 50 41 NiMo B 42 H5 ~E 57 18-N2M3 A GALEB 70 E 50 2Mn 1Ni B 42 H5 ~E 57 16-N2M3 A EVB 2.5 Ni E 50 8 2Ni B 42 H5 ~E 57 18-3N3 A EVB 2.5 NiMo E 55 6 2NiMo B 42 H5 * ~E 62 18 N4M2A H5 * EVB 62 E 62 4 MnMoB42H5* ~E62 18 4M2 H5 EVB 75 E69 6Mn2NiCrMoB42H* ~E 78 16-N5CM3AH5* EVB CrNiMo E 62 2Z-B 42 H5 * / EVB 80 ~E 696Mn2NiCrMoB42H5* ~E 78 16 N5CM3 A H5* E 794Mn2Ni1CrMoB42H5* ~E 83 16 N5CM3 H5* EVB 100 EVB 100 EKSTRA E 89 4 ZB62 H5 ~E 83 16 N5CM3 H5*
I1
d.o.o.
PRODUCT PROGRAMME
~ E 62 4 Z B 34 ~E 69 18 GA EN ISO / AWS A-5.5 / A-5.4 * E 7018-A1 E 8018-G E 8018-B2 E 9018-B3 / E 502-15 * E 505-15 * / / ~ E 9016-B9 ~ E 9018-B9 E 8016-B5 E 8013-G E 8013-G E 8013-G E 9013-G E 8016-B6 A-5.4 / A-5.11* E 410-15 ~ E 410-15 E 410 NiMo-15 / E 430-15 ~ E 430Mo-15 E 347-17 E 347-15 E 308 L-17 E 318-17 E 318-15 E 316 L-17 E 317 L-17 E 2209 L-17 E 308 MoL-17 E 385-17 E 385-15 AISI: 446 E 309 L-17 E 309Mo L-17 E 310-16 E 310-15 E 309Mo-16 ~ E 307-15 ~ E 307-16 E 307-17 E 312-17 E 312-26 E1 E2 E3 E4 E5 E6 E7 E8 E9 E10 E11 E12 F1 F2 F3 F4 F5 D16 Page
2560-A / 3580-A * 2560-B / 3580-B * Medium and high alloyed basic electrodes for welding creep resistant steels E464MoB42H5 ~E4918-3M3A EVB Mo EMoB42H5 * ~E4918-1M3 * EVB MoV E MoV B 42 H5 * ~E 62 18-G H5 * EVB CrMo E CrMo1 B 42 H5 * ~E 55 18-1CM H5 * EVB 2 CrMo E CrMo2 B 42 H5 * ~E 62 18-2C1MH5 * EVB P24 E Z B42 H5 * ~E 55 18-3C1MV * EVB 5 CrMo E CrMo5 B 42 H5 * E 55 15 5CM-H5 * EVB 9 CrMo E CrMo9 B 42 H5 * E 62 15-9C1M H5 * EVB CrMoV ~ E CrMoV1 B32 H5* ~E 55 16-GH5 * EVB 3 CrMoV E Z B 42 H5 * ~E 62 16-3C1 MV H5* EVB 9 CrMoV ~ E CrMo91 B 42 H5* ~E 62 15-9C1MV1 H5* EVB 91 CrMoV E CrMo91 B 42 H5 * ~E 62 15-9C1MV H5 * EVB Mo1Cr E Z B42 H5 * ~E 55 18-1M3 H5 * Medium alloyed rutile electrodes for welding creep resistant steels E46AMoR12/EAMoR12* ~E 55 13-1M3 A (*) E Ti Mo E Ti MoV E MoV R 12 * E 55 13 G * E Ti CrMo E CrMo1 R 12 * E 55 13 1CM * E Ti 2 CrMo E CrMo2 R 12 * E 62 13 2C1M * E Ti 5 CrMo E CrMo5 R 12 * E 62 13 5CM * EN 1600 / ISO 3581 * DIN 8556/ DIN 1736 * High alloyed ferritic stainless steel electrodes INOX B 13 Fe E 13 B 43 E 13 MPB 30+ 130 INOX B 13/1 Fe E 13 1 B 43 E 13 1 MPB 30+ 130 INOX B 13/4 Fe E 13 4 B 43 E 13 4 MPB 30+ 130 INOX B 13/6 Fe / / INOX B 17 Fe E 17 B 43 E 17 MPB 30+ 130 INOX B 17 MoFe E 17Mo E 17Mo High alloyed austenitic and austenitic-ferritic stainless steel electrodes INOX R 19/9 Nb E 19 9 Nb R 12 E 19 9 Nb R 26 INOX B 19/9 Nb E 19 9 Nb B 22 E 19 9 Nb B 20+ INOX R 19/9 NC E 19 9 LR 12 E 19 9 LR 26 INOX R 19/12/3 Nb E 19 12 3 Nb R 12 E 19 12 3 Nb R 26 INOX B 19/12/3 Nb E 19 12 3 Nb B 22 E 19 12 3 Nb B 20+ INOX R 19/12/3 NC E 19 12 3 LR 12 E 19 12 3 LR 26 INOX R 19/13/4 L ~ E 19 13 4 LR 12 ~ E 19 13 4 LR 23 INOX R 22/9/3 LN E 22 9 3 N L / INOX R 20/10/3 L ~ E 20 10 3 R 12 ~ E 20 10 3 R 23 INOX R 20/25 L E 20 25 5 Cu NL R 23 E 20 25 5 L Cu R INOX B 20/25 L E 20 25 5 Cu NL B 23 E 20 25 5 L Cu B High alloyed heat resistant stainless steel electrodes INOX R 25/4 Fe E 25 4 R 43 E 25 4 MPR 33 160 INOX R 25/14 NC E 23 12 LR 12 E 23 12 LR 26 INOX R 25/14/3 NC E 23 12 2 LR 12 E 23 13 2 LR 26 INOX R 25/20 E 25 20 R 12 E 25 20 R 26 INOX B 25/20 E 25 20 B 42 E 25 20 B 20+ High alloyed, special purpose electrodes INOX R 22/12/3 Fe E 23.12.2R 160 33X* / INOX B 18/8/6 E 18 8 Mn B 22 E 18 8 Mn B 20+ INOX R 18/8/6 Fe E 18 8 Mn R 53 E 18 8 Mn MPR33 160 INOX R 18/8/6 E 18 8 Mn R 12 E 18 8 Mn R 26 INOX R 29/9 E 29 9 R 12 E 29 9 R 26 INOX R 29/9 Fe E 29 9 R 53 E 29 9 R 26
G1 G2 G3 G4 G5 G6 H1 H2 H3 H4 H5 H6 H7 H8 H9 H10 H11 I1 I2 I3 I4 I5 J1 J2 J3 J4 J5 J6
I2
d.o.o.
PRODUCT PROGRAMME
/ EL NiCr 15 Fe Mn * EN DIN E NiCrFe-3 * AWS J7 Page
EN 14700 DIN 8555 A-5.13 Hardfacing electrodes UTOP 38 E Fe 3 E 3-UM-40-T / UTOP 43 E Fe 3 E 3-UM-400-PT / UTOP 45 E Fe 3 E 3-UM-45-T / UTOP 52 E Fe 3 E 3-UM-60-T / UTOP 55 E Fe 4 E 6-UM-60-T / TOOLDUR E Fe 4 E 4-UM-60-65 S E Fe 5-B E DUR 250 E Fe 3 E 1-UM-250 / E DUR 300 E Fe 1 E 1-UM-300 / E DUR 400 E Fe 3 E 1-UM-400 / E DUR 500 E Fe 3 E 1-UM-50 / E DUR 600 E Fe 8 E 6-UM-60 / E DUR 60 R E Fe 8 E 6-UM-55 / E DUR 600 Si E Fe 8 E 6-UM-55 / TOOLDUR Co E Fe 3 ~ E3-UM-50 CTZ E DUR Cr 13 E Fe 8 E 5-UM-CGP / Electrodes, producing abrasion resistant deposit ABRADUR 54 E Fe 8 E 6-UM-55-G / ABRADUR 58 E Fe 14 ~ E 10-UM-60-G2 / ABRADUR 60 E Fe 14 E 10-UM-60-GR / ABRADUR 64 E Fe 15 ~ E 10-UM-65-GR / ABRADUR 65 E Fe 16 ~ E 10-UM-65-G / ABRADUR 66 E Fe 16 E 10-UM-65-GR / CrWC 600 E Fe 16 E 10-UM-60-C / Manganese alloyed hardfacing electrodes E Mn 14 E Fe 9 E 7-UM-200-KP / E Mn 14 Cr 4 E Fe 9 ~ E 7-UM-200-KP / E Mn 17 Cr 13 E Fe 9 / / E Mn 17 Cr 10 Nb 3 E Fe 9 / / High cobalt alloyed electrodes and rods Durostels DUROSTEL 1 E E 20-UM-55-ZCT R Co Cr-C G/WSG-20-GO-55-ZCT DUROSTEL 1 P E Co Cr-C DUROSTEL 6 E E 20-UM-40-ZCT R Co Cr-A G/WSG-20-GO-45-ZCT DUROSTEL 6 P E Co Cr-A DUROSTEL 12 E E 20-UM-50-ZCT R Co Cr-B G/WSG-20-GO-50-ZCT DUROSTEL 12 P E Co Cr-B DUROSTEL 21 E E 20-UM-300-CKZT / G/WSG-20-GO-300-CKZT / DUROSTEL 21 P G/WSG-20-GO-40-ZCT DUROSTEL F P / EN ISO 1071 DIN 8573 A-5.15 Cast Iron electrodes MONEL EC NiCu-1 E NiCu BG12 E NiCu-B MONEL C EC NiCu-1 E NiCu G13 E NiCu-B SUPER Ni EC Ni-Cl-1 E Ni BG12 E Ni-Cl CAST Ni EC Ni-Cl-1 E Ni BG12 E Ni-Cl CAST Ni C EC Ni-Cl-1 E Ni BG13 E Ni-Cl CAST NiFe EC NiFe-Cl-1 E NiFe BG12 E NiFe-Cl CAST NiFe C EC NiFe-Cl-1 E NiFe BG13 E NiFe-Cl CAST NiFe B EC NiFe-Cl-1 E NiFe BG12 E NiFe-Cl CAST NiFe BC EC NiFe-Cl-1 E NiFe BG13 E NiFe-Cl PRODUCT PROGRAMME CAST NiFe 10 ~E Ni BG12 ~E Ni-Cl CAST Fe EC St 1 ~E Fe-1 S21 ~E St SL 250 EC FeC-2-7 E (FeC-2) BG 49 /
I3
PRODUCT PROGRAMME
SL 250 EC FeC-2-7 E (FeC-2) BG 49 / O12
d.o.o.
PRODUCT
EN
DIN DIN 1733 / DIN 8555* E CuSn-7 E CuAl-8 E 31-200cn * ~ E CuMn2 DIN 1732 EL-Al 99.5 EL-Al Mn EL-Al Si5 EL-AlSi 12
AWS A-5.6 E CuSn-A E CuAl-A2 ~ E CuMnNiAl ~ ECu A-5.3 E-1100 E-3003 E-4043 / / / / / A-5.17 F7 A0EM 12K F7 A0EM 12K F7 A2EM 12K F6 A2EM 12K F6 A4EM 12K F6 A4EM 12K / / / / / / F6 A4-EM12K F7 A2-EM12K A-5.9 / A-5.28* A-5.14 ** / A-5.18 *** ER 70 S-A1 * ER 80 S-G * ER 90S-G ER70 S-6 *** ER70 S-6 *** ER 347 Si ER 308 L Si ER 318 Si ER 316 L Si ER 309 L Si ~ ER 307 ER 310 ER 312 ER NiCr-3 **
Page
EN ISO 1071 Electrodes for welding copper and aluminium alloys BRON CuSn E CuSn 2 B2 BRON CuAl E CuAl 2 B2 BRON CuMn E CuAlMn 2 B2 EL Cu
P1 P2 P3 P4 P5 P6 P7 P8 Q1 Q2 Q3 Q4
ALU 99.5 ALU Mn ALU 5 Si ALU 12 Si Electrodes for cutting, gouging and preheating SEKATOR 1 / / SEKATOR 2 A / / SEKATOR 2 B / / TERMO / EN 760 DIN 32 522 Agglomerated welding fluxes and wires for S.A. welding AR 18.5 SA AR 188 AC AR D1 SA AR 197 AC AR 18.1 SA AR 188 AC AB 100 SA AB 176 AC H5 FB TT SA FB 155 AC H5 FB 12.2 SA FB 165 AC H5 FB CrNi SA FB 263 DC CS Cr 6 SA CS 196 AC CS CrNi SA CS 24994 AC AB Cr SA AB 2B 5654 AC CS 350 SA CS 3 C0,2 Cr3 AC FB 33 SA AF 25635 DC AB 123 SA AB 167 AC H5 MS 200 SA MS 188 AC EN ISO 636-A / 21952-A * 636-B / 21952-B * 14343-A ** 14343-B *** 18274 *** Welding rods for TIG welding TIG Mo TIG CrMo TIG 2 CrMo TIG VAC 60 TIG VAC 65 TIG 19/9 NbSi TIG 19/9 NC Si TIG 19/12/3 NbSi TIG 19/12/3 NC Si TIG 25/14 NC Si TIG 18/8/6 Si TIG 25/20 TIG 29/9 TIG 70/15
W 46 2 W2Mo W MoSi * W CrMo1Si * W CrMo2Si * W 55 2 W2M3 W 1M3 *
W 42 5 W3Si1 W 46 4 W4Si1 W 19 9 Nb Si ** W 19 9 L Si ** W 19 12 3 Nb Si ** W 19 12 3 L Si ** W 23 12 L Si ** W 18 8 Mn ** W 25 20 ** W 29 9 **
W 1CM3 * W 2C1M3 * W 49 5 W6 W 55A 4 W6 SS 347 Si ** SS 308 LSi ** ~SS 318 ** SS 316 LSi ** SS 309 LSi ** ~SS 307 ** SS 310 ** SS 312 ** /
I4
I4
d.o.o.
PRODUCT PROGRAMME
W 22 9 3 NL **
S Ni 6625 (NiCr22Mo9Nb)***
TIG 22/9/3 LN TIG 625 TIG Cu TIG CuAl8 TIG CuSn6 TIG CuAg TIG CuMn TIG CuSi3 PRODUCT
SS 2209 ** /
EN ISO 24373 S-Cu 1898 (CuSn1) S-Cu 6100 (CuAl7) S-Cu 5180 (CuSn5P) S-Cu 1897 (CuAg1) S-Cu 6338 (CuMn13Al8Fe3Ni2) S-Cu 6560 (CuSi3Mn1) EN ISO 14341-A 14341-B
ER 2209 ER NiCrMo-3 ** A-5.7 ER CuSn ER CuAl-A1 ER CuSn-A / / ER CuSi-A AWS A-5.18/A-5.28* ER 70 S-6 ER 70 S-6 ~ ER 80 S-Ni1* ER 70 S-2 ER 80 S-G* A-5.9 / A-5.28 * A-5.14**
Welding wires for MAG (CO2) welding VAC 60 G 42 5 M/C G 3 Si1 G 49A 5 M/C G6 VAC 65 G 46 4 M/C G 4 Si1 G 55A 4 M/C G6 VAC 60 Ni G 46 4 M/C G 3 Ni1 G 55A 4 M/C GN2 VAC 60 Ti ~G 42 2 M/A/C G3Si1 ~G 49A 2 M/A/C G11 VAC 60 CuNi G 42 2 M/C G 0 G 49A 2 M/C G0 EN ISO 16834-A / 14343-A * 16834-B / 14343-B * 21952-A ** 21952-B ** 18274 *** Welding wires for GMA welding MIG Mo G MoSi ** G 1M3 ** MIG CrMo G CrMo1Si ** / MIG 2 CrMo G CrMo2Si ** / MIG 65 G 55 2 A Mn3Ni1Mo G 62A 2 N2M2T MIG 75 G 69 4 Mn3Ni1CrMo G 69A 2 N2M2T MIG 90 G 89 6 M Mn4Ni2CrMo G 83A 6 M N4M4T MIG 17 G 17* SS 430 * MIG 19/9 Nb Si G 19 9 Nb Si * SS 347 Si * MIG 19/9 NC Si G 19 9 L Si * SS 308 LSi * MIG 19/12/3 Nb Si G 19 12 3 Nb Si * ~SS 318 * MIG 19/12/3 NC Si G 19 12 3 L Si * SS 316 LSi * MIG 25/14 NC Si G 23 12 L Si * SS 309 LSi * MIG 18/8/6 Si G 18 8 Mn * ~SS 307 MIG 25/20 G 25 20 * SS 310 MIG 29/9 G 29 9 * SS 312 S Ni 6076 (NiCr20) *** / MIG 70/15 W 22 9 3 NL ** MIG 22/9/3 LN / S Ni 6625 (NiCr22Mo9Nb)*** / MIG 625 EN ISO 24373 MIG Cu S-Cu 1898 (CuSn1) MIG CuAl8 S-Cu 6100 (CuAl7) MIG CuSn6 S-Cu 5180 (CuSn5P) MIG CuAg S-Cu 1897 (CuAg1) MIG CuMn S-Cu 6338 (CuMn13Al8Fe3Ni2) MIG CuSi3 S-Cu 6560 (CuSi3Mn1) EN 12 536 DIN 8554 Welding rods for oxyacetilene- welding VP 37 OI GI VP 40 O II G II VP 42 O III G III
S4 S5 S6 S7 S8
ER 70 S-A1 * ER 80 S-G * ER 90S-G * ER 80 S-Ni 1 * ER 100 S-1 * ER 120 S-1 * ER 430 ER 347 Si ER 308 L Si ER 318 Si ER 316 L Si ER 309 L Si ER 307 ER 310 ER 312 ER NiCr-3 ** ER 2209 ER NiCrMo-3 ** A-5.7 ER CuSn ER CuAl-A1 ER CuSn-A / / ER CuSi-A A-5.2 R 45 R 60 R 60
S1 S2 S3 S9 S10 S11 S12 S13 S14 S15 S16 S17 S18 S19 S20 S21 S22 S23 S24 S25 S26 S27 S28 S29
T1 T2 T3
I5
d.o.o.
PRODUCT PROGRAMME
G IV GV DIN 8557* / DIN 8556 S2 * S 2 Mo * S3 * UP X2 CrNi 19 9 UP X2 CrNiMo 19 12 UP X 15 CrNiMn 18 8 UP X8 Cr 18 UP X2 CrNi 19 9 R 65 R 65 A-5.17 /A-5.23* /A-5.9** EM 12 K EA 2 * EM 13 K ER 430 ** ER 308 L ** ER 316 L ** ER 307 ** / / T4 T5
VP Mo VP CrMo
O IV OV EN 14171* / EN 12072 EN 10 088** Wires and strips for submerged arc welding EPP 2 S2 * EPP 2 Mo S 2 Mo * EPP 3 S3 * EPP 17 Cr X 6 Cr 17** EPP 19/9 NC S 19 9 L EPP 19/12/3 NC S 19 12 3 L EPP 18/8/6 S 18 8 Mn INOX TR Cr 17 / INOX TR 19/9 /
U1
PRODUCT PROGRAMME
PRODUCT Flux cored wires for MIG MAG welding Metalic type 17632-A / 18276-A * FILTUB 12 M FILTUB 32 M Rutile type FILTUB 4 R FILTUB 5 R FILTUB 6 R FILTUB 7 R FILTUB 8 R Basic type FILTUB 12 B FILTUB 14 B FILTUB 16 B FILTUB 18 B FILTUB 19 B FILTUB 25 B FILTUB 28 B FILTUB 32 B FILTUB 36 B FILTUB 38 B FILTUB 40 B FILTUB 42 B For hardfacing FILTUB DUR 3 FILTUB DUR 4 FILTUB DUR 5 FILTUB DUR 12 FILTUB DUR 14 FILTUB DUR 15.1 FILTUB DUR 16 FILTUB UTOP 38 FILTUB UTOP 55 FILTUB UTOP Co FILTUB UTOP Mo1 Flux cored wires for S.A.I6 welding FILTUB 112 T 46 4 MM1 H5 EN ISO 17632-B / 18276-B * T554T151MA H5 AWS A-5.18/A-5.19* A-5.20/A-5.29*
E 70C-6MH4 E 71 T-1 M E 111T1-K4H4*
Page
V1 V2
T 694Mn2NiCrMoMM1H5* T764T5-1MA-N4C1M2H5 * E 110C-K4H4* 17632-A / 17634-A * T 46 4 C/M1 H5 T 504ZP C/M1 H5 T 42 AZ PC/M 1 H5 T 46 6 1Ni PM1 H5 T 46AMoPM1 H5 T MoP C/M1 H5 * 17632-A / 17634-A * 18276-A ** T 42 4B M/C3 H5 T 464MoBC/M3 H5 T MoBC/M1 H5 * T CrMo1 BM/C3 H5 * T CrMo2 BM/C3 H5 * / / T5561NiMoBC/M3 H5**
T696Mn2NiCrMoBM/C3H5**
17632-B / 17634-B * T 554T1-C/M/A H10 T554T1-1C/M/A-NCC1 H5 T 49YT1-1C/M/A-G H5 T556T1-1MA-N1 H5 T55YT1-1MA-2M3 H5 T49T1-1C/M-2M3 H5* 17632-B / 17634-B * 18276-B ** T49 4T5.3M/C/A-2M3H5 T554T53M/CA-2M3H5 T49T5-0M/C-2M3 H5* T55T5-0M/C-1CM-H5*
T62T5-0M/C-2C1M-H5*
A-5.29/A-5.20 * E 71 T-1 * E 71 T1-G E 71 T1-G E 81 T1-Ni 1 E 81 T1-A1 A-5.29/A-5.20 * E 70 T-5 M4 * E 80 T5-G E 80 T5-B2 E 80 T5-G E 90 T5-G E 90 T5-G E 90 T5-G E 110 T5-K4 E 90 T5-G E 120 T5-G E 80 T5-G E 110 T5-G
V3 V4 V5 V6 V7
V8 V9 V10 V11 V12 V13 V14 V15 V16 V17 V18 V19 V20 V21 V22 V23 V24 V25 V26 V27 V28 V29 V30
/ /
T626T4-3C/M-N2M2H5** T766T5-3M/C/A-N4C1M2H5**
T 42 8 2Ni B M3 H5
T894Mn2Ni1CrMoBM3H5**
T498T5-3MA-N5H5
T834T5-3MA-N4C2M2H5**
~T466ZBM/C3 H5 ~T556T5-3M/C/A-G H5 / / EN 14 700 DIN 8555 MSG1-GF-M21-250/MSG1-GF-C1-250 T Fe 1 MSG1-GF-M21-300/MSG1-GF-C1-300 T Fe 1 MSG1-GF-M21-350/MSG1-GF-C1-350-P T Fe 1 MSG5-GF-M21-40-P/MSG5-GF-C1-40-P T Fe 2 MSG6-GF-M21-55-GP/MSG6-GF-L1-55-GP T Fe 2 MSG5 -GF-M21-50-P/MSG5-GF-C1-50-P T Fe 3 MSG6-GF-M21-60-GP/MSG6-GF-C1-60-GP T Fe 2 MSG5-GF-M21-40-P/MSG5-GF-C1-40-P T Fe 3 MSG6-GF-M21-55-GP/MSG6-GF-C1-55-GP T Fe 3 MSG 6-GF-M21-55-GP/MSG6-GF-C1-55-GP T Fe 3 MSG 5-GF-M21-50-GP/MSG5-GF-C1-50-GP T Fe 3 EN ISO 14717-A/ EN ISO 24 EN ISO 24 589-B/ A 5.23 589-A*/ EN ISO 26 304-A** EN ISO 26 304-B* F7 A4-EC-G S 46 4FB T3
I6
V31
FILTUB 40 B ~T466ZBM/C3 H5 ~T556T5-3M/C/A-G H5 E 80 T5-G V18 FILTUB 42 B / / E 110 T5-G V19 For hardfacing EN 14 700 DIN 8555 MSG1-GF-M21-250/MSG1-GF-C1-250 FILTUB DUR 3 T Fe 1 V20 MSG1-GF-M21-300/MSG1-GF-C1-300 FILTUB DUR 4 T Fe 1 V21 MSG1-GF-M21-350/MSG1-GF-C1-350-P FILTUB DUR 5 T Fe 1 V22 MSG5-GF-M21-40-P/MSG5-GF-C1-40-P FILTUB DUR 12 T Fe 2 V23 MSG6-GF-M21-55-GP/MSG6-GF-L1-55-GP FILTUB DUR 14 T Fe 2 V24 MSG5 -GF-M21-50-P/MSG5-GF-C1-50-P FILTUB DUR 15.1 T Fe 3 V25 MSG6-GF-M21-60-GP/MSG6-GF-C1-60-GP FILTUB DUR 16 T Fe 2 V26 MSG5-GF-M21-40-P/MSG5-GF-C1-40-P FILTUB UTOP 38 T Fe 3 V27 PRODUCT PROGRAMME MSG6-GF-M21-55-GP/MSG6-GF-C1-55-GP FILTUB UTOP 55 T Fe 3 V28 d.o.o. MSG 6-GF-M21-55-GP/MSG6-GF-C1-55-GP FILTUB UTOP Co T Fe 3 V29 PRODUCT EN ISO MSG 5-GF-M21-50-GP/MSG5-GF-C1-50-GP AWS Page FILTUB UTOP Mo1 T Fe 3 V30 Flux cored wires for MIG ENwelding ISO 14717-A/ EN ISO 24 EN ISO 24 589-B/ S.A.- MAG A 5.23 weldingtype 589-A*/ EN ISO 26 304-A** EN ISO 26 304-B* Metalic 17632-A / 18276-A * 17632-B / 18276-B * A-5.18/A-5.19* FILTUB 112 F7 A4-EC-G V31 S 46 4FB T3 A-5.20/A-5.29* FILTUB F7 A4-EC-A4 V32 S Mo4 FB* S 554 FBH5 TU1M3 E 70C-6MH4 FILTUB 114 12 M T 46 MM1 H5 T554T151MA V1 E 71 T-1 M FILTUB 116 F8 P0-EC-B2 V33 110C-K4H4* FILTUB 32 M T 694Mn2NiCrMoMM1H5* T764T5-1MA-N4C1M2H5 * E V2 118 F8 PO-EC-B3 V34 E 111T1-K4H4* FILTUB 126 F7 A8-EC-G V35 Rutile type 17632-A / 17634-A * 17632-B / 17634-B * A-5.29/A-5.20 FILTUB 128 F9 A8-EC-G * V36 FILTUB 4 R T 46 H5 T 554T1-C/M/A H10 E 71A8-EC-F5 T-1 * V3 132 F11 V37 S 69 4 6 C/M1 FB T3Ni2.5NiCrMo** S 78A6 FBTUN5CM3* FILTUB 5 R T 504ZP C/M1 H5 T554T1-1C/M/A-NCC1 H5 E 71 T1-G V4 136 F7 A15-EC-Ni2 V38 FILTUB 6 R T PC/M 1 H5 T 49YT1-1C/M/A-G H5 E 71A4-EC-G T1-G V5 138 F12 V39 S 42 89 AZ 4 FB T3Ni2.5Cr1Mo** FILTUB 7 R T 46 6 1Ni PM1 H5 T556T1-1MA-N1 H5 E 81 T1-Ni 1 V6 140 F7 A4-EC-G V40 T 46AMoPM1 H5 T55YT1-1MA-2M3 H5 E 81 T1-A1 V7 For hardfacing EN 14700 DIN 8555 FILTUB 8R T MoP C/M1 H5 * T49T1-1C/M-2M3 H5* FILTUB DUR 205 Fe 1 UP1-GF-BFB-165-350 V41 17632-A 17632-B / 17634-B * FILTUB DUR 212 TZ Fe 7 / 17634-A * UP5-GF-BFB4 652-40 A-5.29/A-5.20 * V42 Basic type 18276-A 18276-B ** FILTUB DUR 214 TZ Fe 3 ** UP6-BFB4 652 - 50 V43 FILTUB DUR 12 B 215 T 42 H5 T49PROGRAMME 4T5.3M/C/A-2M3H5 V8 Fe 4B 8 M/C3 PRODUCT UP5-GF-BFB4 652-55 E 70 T-5 M4 * V44 T 464MoBC/M3 H5 T554T53M/CA-2M3H5 E 80 T5-G FILTUB DUR 12Cr2NiMo TZ Fe 7 UP5-GF-BFB 165-400 V45 FILTUB 14 B V9 T MoBC/M1 H5 * T49T5-0M/C-2M3 H5* FILTUB DUR 13Cr3NiMoV TZ Fe 7 UP5-GF-BFB 165-40 V46 FILTUB 16 B T CrMo1 BM/C3 H5 * T55T5-0M/C-1CM-H5* E 80 T5-B2 V10 FILTUB DUR 17 Cr TZ Fe 7 UP5-GF-BCS 256-40 V47 I6 T62T5-0M/C-2C1M-H5* FILTUB 18 B stainless steel T CrMo2 BM/C3 H5 * E 80 T5-G V11 For welding EN ISO 17633-A EN ISO 17633-B FILTUB 19 B / / E 90 T5-G V12 FILCORD 308 L T 19 9 LR M/C 5 TS 308L-F M/C0 V48 FILTUB 25 B / / E 90 T5-G V13 FILCORD 316 L T 19 12 3LR M/C 5 TS 316L-F M/C0 V49 T626T4-3C/M-N2M2H5** FILTUB 28 B T5561NiMoBC/M3 H5** E 90 T5-G V14 FILCORD 309 L T 23 12 LR M/C 5 TS 309L-F M/C0 V50 T766T5-3M/C/A-N4C1M2H5** T696Mn2NiCrMoBM/C3H5** FILTUB 32 B E 110 T5-K4 V15 PRODUCT PROGRAMME FILCORD 307 T 18 8Mn R M 3 (C3) V51 FILTUB 36 B T 42 8 2Ni B M3 H5 T498T5-3MA-N5H5 E 90 T5-G V16 T894Mn2Ni1CrMoBM3H5** T834T5-3MA-N4C2M2H5** FILTUB 38 B E 120 T5-G V17 FILTUB 40 B PRODUCT ~T466ZBM/C3 H5 EN ~T556T5-3M/C/A-G E 80 T5-G V18 DIN H5 AWS Page FILTUB 42 B / / T5-G EN 499 DIN 1913 / 8529 * E 110 A-5.1 / A-5.5* V19 For hardfacing ENacid 14 700 DIN 8555 Low alloyed cellulosic, rutile and electrodes MSG1-GF-M21-250/MSG1-GF-C1-250 FILTUB DUR 3 T Fe 1 E 35 A A 13 V20 NEUTRAL E 43 10 A 2 / A1 MSG1-GF-M21-300/MSG1-GF-C1-300 FILTUB DUR 4 T Fe 1 E 38 2 R A 13 V21 RAPID E 43 33 AR 7 E 6020 A2 MSG1-GF-M21-350/MSG1-GF-C1-350-P FILTUB DUR 5 T Fe 1 E 35 2 C 21 V22 CELEX E 43 53 C 4 E 6010 A3 MSG5-GF-M21-40-P/MSG5-GF-C1-40-P FILTUB Mn DUR 12 T Fe 2 E 42 3 C 21 V23 CELEX E 51 53 C 4 E 7010-G A4 MSG6-GF-M21-55-GP/MSG6-GF-L1-55-GP FILTUB Mo DUR 14 T Fe 2 E 42 3 Mo C 21 V24 CELEX / E 7010-A1* A5 MSG5 -GF-M21-50-P/MSG5-GF-C1-50-P FILTUB Ni DUR 15.1 T Fe 3 E 46 3 1Ni C 21 V25 CELEX / E 8010-G * A6 MSG6-GF-M21-60-GP/MSG6-GF-C1-60-GP FILTUB NiMo DUR 16 T Fe 2 E 50 3 1NiMo C 21 V26 CELEX / E 9010-G* A7 MSG5-GF-M21-40-P/MSG5-GF-C1-40-P FILTUB UTOP 38 T Fe 3 E 35 0 RC 11 V27 JADRAN S E 43 11 R(C) 3 E 6013 A8 MSG6-GF-M21-55-GP/MSG6-GF-C1-55-GP FILTUB UTOP T Fe 3 E 38 0 RC 11 V28 RUTILEN 12 55 E 43 22 R(C) 3 E 6012 A9 MSG 6-GF-M21-55-GP/MSG6-GF-C1-55-GP FILTUB UTOP Co T Fe 3 V29 RUTILEN Z E 42 0 RC 11 E 51 22 RR(C) 6 E 6013 A10 MSG 5-GF-M21-50-GP/MSG5-GF-C1-50-GP FILTUB UTOP Mo1 T Fe 3 V30 RUTILEN 1000 S E 42 0 RC 11 E 51 32 RR(C) 5 E 6013 A11 EMONA 35 2 RBEN 12 ISO 24 E 43 43 RR(B) 7 E 6013 A12 EN ISOE 14717-A/ EN ISO 24 589-B/ Flux cored wires for S.A.A 5.23 welding 13 RUTILEN 42ISO 0 RR E 51 22 RR 6 E 6013 A13 589-A*/E EN 2612 304-A** EN ISO 26 304-B* RUTILEN X E 42 E 51 22 RR 6 EA4-EC-G 6013 A14 FILTUB 112 F7 V31 S 46 4FB T3 0 RR 12 RUTILEN 2000 S E 42 0 RR 12 51 FB 22 RR 6 EA4-EC-A4 6013 A15 FILTUB 114 F7 V32 S Mo FB* SE 554 TU1M3 RUTILEN K E 38 2 R 12 E 43 33 R 3 EP0-EC-B2 6013 A16 FILTUB 116 F8 V33 RUTILEN 13 M E 38 0 R 12 E 43 21 R 3 EPO-EC-B3 6013 A17 FILTUB 118 F8 V34 RUTILEN S E 38 0 RC 11 E 43 22 R(C)3 EA8-EC-G 6013 A18 FILTUB 126 F7 V35 RUTILEN E E 42 0 RC 11 E 51 32 R(C)3 EA8-EC-G 6013 A19 FILTUB 128 F9 V36 High efficiency electrodes FILTUB 132 V37 S 69 6 FB T3Ni2.5NiCrMo** S 78A6 FBTUN5CM3* F11 A8-EC-F5 FILTUB 136 F7 V38 SAVA 130 E 38 0 RR 33 E 43 32 RR 11 130 EA15-EC-Ni2 7024 B1 FILTUB 138 F12 A4-EC-G V39 S 89 4 FB T3Ni2.5Cr1Mo** SAVA 150 E 38 0 RR 53 E 43 32 RR 11 150 E 7024 B2 FILTUB 140 F7 V40 SAVA 180 E 42 0 RR 74 E 43 32 RR 11 180 EA4-EC-G 7024 B3 For hardfacing EN 14700 DIN 8555 SAVA 200 E 42 0 RR 74 E 43 32 RR 11 200 E 7024 B4 SAVA GV 130 E 43 32 RR 11 130 E 7024 B5 FILTUB DUR 205 T Fe 1 E 38 0 RR 34 UP1-GF-BFB-165-350 V41 SAVA GV 160 E 43 32 RR 11 160 E 7024 B6 FILTUB DUR 212 TZ Fe 7E 38 0 RR 54 UP5-GF-BFB4 652-40 V42 SAVA 150 B 214 E 51 43 B652 12 150 E 7028 B7 FILTUB DUR TZ Fe 3E 42 2 B 53 UP6-BFB4 - 50 V43 SAVA 150 AR E 51 53 AR 11 160 E 7027 B8 FILTUB DUR 215 T Fe 8 E 42 4 RA 53 UP5-GF-BFB4 652-55 V44 FILTUBlow DUR 12Cr2NiMo TZ Fe 7 UP5-GF-BFB 165-400 V45 Basic, hydrogen electrodes EVB 50 E 42 4 B 32 H 5 E 51 55 B 10 E 7018 C1 I7 EVB 55 E 42 6 B 42 H5 EY 42 76 Mn B * E 7018-1 C2 I6 EVB EXTRA E 42 6 B 12 H10 EY 42 53 Mn B * E 7016 C3
RUTILEN 13 E 42 0 RR 12 E 51 22 RR 6 E 6013 RUTILEN X E 42 0 RR 12 E 51 22 RR 6 E 6013 RUTILEN 2000 S E 42 0 RR 12 E 51 22 RR 6 E 6013 RUTILEN K E 38 2 R 12 E 43 33 R 3 E 6013 RUTILEN 13 M E 38 0 R 12 E 43 21 R 3 E 6013 RUTILEN S E 38 0 RC 11 E 43 22 R(C)3 E 6013 RUTILEN E E 42 0 RC 11 E 51 32 R(C)3 E 6013 High efficiency electrodes SAVA 130 E 38 0 RR 33 E 43 32 RR 11 130 E 7024 SAVA 150 E 38 0 RR 53 E 43 32 RR 11 150 E 7024 SAVA 180 E 42 0 RR 74 E 43 32 RR 11 180 E 7024 PRODUCT PROGRAMME SAVA 200 E 42 0 RR 74 E 43 32 RR 11 200 E 7024 d.o.o. SAVA GV 130 E 38 0 RR 34 E 43 32 RR 11 130 E 7024 SAVA GV 160 E 38 0 RR 54 E 43 32 RR 11 160 E 7024 EN AWS SAVA 150 B PRODUCT E 42 2 B 53 E 51 43 BDIN 12 150 E 7028 SAVA 150 AR E 42 4 RA 53 E 51 531913 AR 11 160 * EA-5.1 7027 / A-5.5* EN 499 DIN / 8529 Basic, low hydrogen electrodes Low alloyed cellulosic, rutile and acid electrodes EVB 50 E 42 E 51 E NEUTRAL 35 4 AB A 32 13 H 5 43 55 10 B A 10 2 / 7018 EVB 55 E 42 H5 EY 42 76 Mn E 7018-1 RAPID 38 6 2B R 42 A 13 E 43 33 AR 7B * 6020 EVB EXTRA E 42 EY 42 53 E 7016 CELEX 35 6 2B C 12 21 H10 E 43 53 CMn 4 B* 6010 EVB 45 Mn E 42 3 2C B 32 E 51 43 E 7016 CELEX 21 53 B(R) C4 9 7010-G EVB 47 Mo E 38 32 E E 6018 CELEX 42 2 3B Mo C 21 / 43 55 B 10 7010-A1* EVB S Ni E 42 12 E E 7016 CELEX 46 4 3B 1Ni CH10 21 / 51 43 B(R) 10 8010-G * GALEB 50 E 50 42 2 32 C 21 E E 7016 CELEX NiMo 3B 1NiMo / 51 54 B(R) 10 9010-G* EVB K S E 42 12 E 51 E 7016 JADRAN 35 2 0B RC 11 43 43 11 B(R) R(C) 10 3 6013 RUTILEN 12 E 38 0 RC 11757 * E 438529 22 R(C) 3 E 6012 EN 499 / EN DIN A-5.5 RUTILENalloyed Z E 42 0 RC 11 E 6013 Medium basic electrodes for welding finegrained steelsE 51 22 RR(C) 6 RUTILEN E 50 42 2 0 Mo RC B 11 E 51 32 RR(C) 5B E 8018-G 6013 EVB 60 1000 S E 42 EY 5075 Mn1Mo E EMONA E 55 35 6 2Mn RB 12 E 43 43 RR(B) 7 E 9018-G 6013 E 12 NiMo B42H5 EY5576Mn1NiMoBH5 EVB 65 E RUTILEN E 50 42 61 0 RR E 51 22 RR 6 E 8018-C3 6013 EVB Ni 13 E Ni 12 B 42 EY 50 75 Mn1Ni B E RUTILEN E 42 0 RR 12 E 51 22 RR 6 B E 7018-G 6013 EVB CuNi X / EY 50 75 CuNi E RUTILEN 2000 S E 46 42 4 0Z RR E 51 22 RR 6 E 7018-G 6013 EVB CuNiCr E B 12 42 / E RUTILEN K E 38 2 R 12 E 43 33 R 3 E EVB NiMo E 50 21 NiMo B 42 EY 50 76 1 NiMo B E 6013 8018-G RUTILEN 13 M E 38 0 R 12 E 43 21 R 3 E GALEB 70 E 50 A1 NiMo B 42 EY 50 75 1 NiMo B E 6013 9016-G RUTILEN S E 38 0 RC 11 E 43 22 R(C)3 E EVB 2.5 Ni E 50 2 8Ni B 32 H10 EY 50 76 2Ni B E 6013 8018-C1 RUTILEN E E 42 0 RC 11 E 51 32 R(C)3 E EVB 2.5 NiMo E 55 2 6NiMo B 42 * EY 50 75 2 NiMo B E 6013 9018-G High efficiency electrodes EVB 62 E 62 4 MnMoB42H5* / E 10018 G SAVA 130 E 38 0 RR 33 E 43 32 RR 11 130 E 7024 EVB 75 696Mn6NiCrMoB42* EY 6975Mn2NiCrMoB 10018-G SAVA 150 E 38 0 RR 53 E 43 62 32 52 RR 11 150 B E 7024 EVB CrNiMo EY 1NiCrMo E 11018 G SAVA 180 E 42 0 RR 74 E 43 32 RR 11 180 E EVB 80 E 69 6Mn2NiCrMoB42* EY 6975Mn2NiCrMoB E 7024 11018-G SAVA 200 E 42 0 RR 74 E 43 32 RR 11 200 E 7024 EVB 100 E 79 4Mn2Ni1CrMoB42* EY7964Mn2Ni1CrMoB E 12018-G SAVA GVEKSTRA 130 E E 43 32 RR 11 130 E EVB 100 / 38 0 RR 34 EY8975Mn2Ni1MoBH5 E 7024 12018-G PROGRAMME SAVA GV 160 E 38 0 PRODUCT RR 5434 E 43 32 RR 11 160 E 7024 EVB SP2 / / E 62 4 ZB SAVA 150 B E 42 2 B 53 E 51 43 B 12 150 E 7028 SAVA 150 AR E 42 4 RA 53 E 51 53 AR 11 160 E 7027 PRODUCT EN DIN AWS Basic, low hydrogen electrodes EVB 50 E EN 42 4 B 32 H 5 E 51 55 B 10 E 7018 1599 / EN 499 * DIN 8575 A-5.5 EVB 55 and high alloyed basic electrodes E 42 for 6 Bwelding 42 H5 creep resistant EY 42 76 Mn B * E 7018-1 Medium steels EVB EXTRA E 42 6 B 12 H10 EY 42 53 Mn B * E 7016 E Mo B42 / E 46 2MoB42* E Mo B 26 EVB Mo E 7018-A1 EVB 45 E 42 2 B 32 E 51 43 B(R) 9 E 7016 EVB MoV E MoV B 42 E MoV B 20+ E 8018-G EVB 47 E 38 2 B 32 E 43 55 B 10 E 6018 EVB CrMo E CrMo1 B 42 E CrMo1 B 26 E 8018-B2 EVB S E 42 4 B 12 H10 E 51 43 B(R) 10 E 7016 EVB 2 CrMo E CrMo2 B 42 E CrMo2 B 20+ E 9018-B3 GALEB 50 E 42 2 B 32 E 51 54 B(R) 10 E 7016 EVB P24 / / / EVB K E 42 2 B 12 E 51 43 B(R) 10 E 7016 EVB 5 CrMo E CrMo5 B 42 E CrMo5 B 20+ E 502-15 * EN 499 / EN 757 * DIN 8529 A-5.5 EVB 9 CrMo E CrMo9 B 42 E CrMo9 B 20+ E 505-15 * Medium alloyed basic electrodes for welding finegrained steels EVB CrMoV E CrMoV1 B 20+ / E CrMoV1 B EVB 3 60 EE 50 Mo B 42B42 H5 /EY 5075 Mn1Mo B EVB CrMoV Z2 CrMo 3V /E 8018-G E 55 6 Mn 12 NiMo B42H5 EY5576Mn1NiMoBH5 E 9018-G EVB 9 65 EVB CrMoV / E CrMo91 B42 E 9016-B9 EVB Ni E 50 61 Ni B 42 EY 50 75 Mn1Ni B E 8018-C3 EVB 91 CrMoV E CrMo91 B 42 / E 9018-B9 EVB CuNi / EY 50 75 CuNi B E 7018-G EVB 911W EZCrMoWVNb911B42 / E 9018-B9 EVB CuNiCr E 46 4 Z B 42 / E 7018-G EVB Mo1Cr / / E 8016-B5 EVB NiMo E 50 21 NiMo B 42 EY 50 76 1 NiMo B E 8018-G Medium alloyed rutile electrodes for welding creep steels GALEB 70 E 50 A1 NiMo resistant B 42 EY 50 75 1 NiMo B E 9016-G E Ti Mo 46 Mo 12 * E Mo R76 222Ni B E EVB 2.5 Ni EE 50 2A 8Ni BR 32 H10 EY 50 E8013-G 8018-C1 E Ti MoV MoV R 12 B 42 * E MoV R 22 E EVB 2.5 NiMo EE 55 2 6NiMo EY 50 75 2 NiMo B E8013-G 9018-G E Ti CrMo CrMo1 R 12 E E 8013-G EVB 62 EE 62 4 MnMoB42H5* / CrMo1 R 22 E 10018 G E Ti 2 CrMo CrMo2 R 12 E CrMo2 R 22 E EVB 75 EE 696Mn6NiCrMoB42* EY 6975Mn2NiCrMoB E9013-G 10018-G E Ti 5 CrMo E CrMo5 R 12 E CrMo5 R 1NiCrMo 22 8016-B6 EVB CrNiMo EY 62 52 B E E 11018 G 1600 DIN 8556/ DIN 1736 * A-5.4 / A-5.11* EVB 80 E EN 69 6Mn2NiCrMoB42* EY 6975Mn2NiCrMoB E 11018-G High alloyed ferritic stainless steel electrodes EVB 100 E 79 4Mn2Ni1CrMoB42* EY7964Mn2Ni1CrMoB E 12018-G EVB 100 EKSTRA / E 13 B 43 EY8975Mn2Ni1MoBH5 E410-15 12018-G INOX B 13 Fe E 13 MPB 30+ 130 E EVB SP2 / 13 1 MPB 30+ 130 / E 410-15 E 13 62 1 4B Z 43 B 34 INOX B 13/1 Fe E INOX B 13/4 Fe E 13 4 B 43 E 13 4 MPB 30+ 130 E 410 NiMo-15 INOX B 13/6 Fe / / / I8 INOX B 17 Fe E 17 B 43 E 17 MPB 30+ 130 E 430-15 INOX B 17 MoFe E 17 Mo E 17Mo E 430Mo-15
A13 A14 A15 A16 A17 A18 A19 B1 B2 B3 B4 B5 B6 Page B7 B8 C1 A1 C2 A2 C3 A3 C4 A4 C5 A5 C6 A6 C7 A7 C8 A8 A9 A10 A11 D1 A12 D2 A13 D3 A14 D4 A15 D5 A16 D6 A17 D7 A18 D8 A19 D9 D10 B1 D11 B2 D12 B3 D13 B4 D14 B5 D15 B6 D16 B7 I8 B8 Page C1 C2 C3 E1 C4 E2 C5 E3 C6 E4 C7 E5 C8 E6 E7 E8 D1 E9 D2 E10 D3 E11 D4 E12 D5 E13 D6 D7 F1 D8 F2 D9 F3 D10 F4 D11 F5 D12 D13 D14 D15 G1 D16 G2 G3 I8 G4 G5 G6
EVB 9 CrMo E CrMo9 B 42 E CrMo9 B 20+ E 505-15 * EVB CrMoV E CrMoV1 B 20+ / E CrMoV1 B EVB 3 CrMoV E Z CrMo 3V B42 H5 / / EVB 9 CrMoV / E CrMo91 B42 E 9016-B9 EVB 91 CrMoV E CrMo91 B 42 / E 9018-B9 EVB 911W EZCrMoWVNb911B42 / E 9018-B9 EVB Mo1Cr / / E 8016-B5 Medium alloyed rutile electrodes for welding creep resistant steels E Ti Mo E 46 A Mo R 12 * E Mo R 22 E 8013-G E Ti MoV E MoV R 12 E MoV R 22 E 8013-G E Ti CrMo E CrMo1 R 12 E CrMo1 R 22 E 8013-G d.o.o. PRODUCT PROGRAMME E Ti 2 CrMo E CrMo2 R 12 E CrMo2 R 22 E 9013-G E Ti 5 CrMo E CrMo5 R 12 E CrMo5 R 22 E 8016-B6 EN 1600 DIN 8556/ DIN 1736 * A-5.4 / A-5.11* High alloyed ferritic stainless steel electrodes INOX B 13 Fe PRODUCT E 13 B 43EN E 13 MPB 30+ 130 E 410-15 DIN AWS INOX B 13/1 Fe E 13 1 MPB 30+ 130 A-5.13 E 410-15 / E 13 1 B 43 DIN 8555 INOX B 13/4 Fe E 13 4 B 43 E 13 4 MPB 30+ 130 E 410 NiMo-15 Hardfacing electrodes INOX B 13/6 Fe / / / UTOP 38 E 3-UM-40-T / INOX B 17 Fe E 17 B 43 E 17 MPB 30+ 130 E 430-15 UTOP 43 E 3-UM-400-PT / INOX B 17 MoFe E 17 Mo E 17Mo E 430Mo-15 UTOP 45 E 3-UM-45-T / High alloyed austenitic and austenitic-ferritic stainless steel electrodes UTOP 52 E 3-UM-60-T / INOX R 19/9 Nb E 19 9 Nb R 12 19 9 Nb R 26 UTOP 55 EE6-UM-60-T / E 347-17 INOX B 19/9 Nb E 19 9 Nb B 22 19 9 Nb B 20+ 347-15 TOOLDUR EE4-UM-60-65 S EE Fe 5-B INOX R 19/9 NC E 19 9 LR 12 19 9 LR 26 E DUR 250 EE1-UM-250 / E 308 L-17 INOX R 19/12/3 Nb E 19 12 3 Nb R 12 19 12 3 Nb R 26 E DUR 300 EE1-UM-300 / E 318-17 INOX B400 19/12/3 Nb E 19 12 3 Nb B 22 19 12 3 Nb B 20+ / E 318-15 E DUR EE1-UM-400 INOX R 19/12/3 NC E 19 12 3 LR 12 19 12 3 LR 26 E DUR 500 EE1-UM-50 / E 316 L-17 INOX R 19/13/4 L E 19 13 4 LR 12 E 19 13 4 LR 23 E DUR 600 E6-UM-60 / E 317 L-17 INOX R 22/9/3 E 22 9 3 N L 32 E DUR 60 R LN E/ 6-UM-55 / E 2209 L-17 INOX R 20/10/3 E 20 10 3 R 12 E 20 10 3 R 23 E DUR 600 Si L E6-UM-55 / E 308 MoL-17 INOX R 20/25 E 20 25 5 Cu NL R23 E 20 25 5 L Cu R E 385-17 TOOLDUR Co L E3-UM-50-CTZ INOX BCr 20/25 E 20 25 5 Cu NL B23 EE5-UM-CGP 20 25 5 L Cu B E DUR 13 L / E 385-15 High alloyed heat resistant stainless steel electrodes Electrodes, producing abrasion resistant deposit INOX R 25/4 E 25 4 R 43 25 4 MPR 33 160 / AISI: 446 ABRADUR 54Fe EE6-UM-55-G INOX R 25/14 E 23 12 LR 32 12 LR 26 ABRADUR 58 NC / E 309 L-17 E E23 10-UM-60-G2 INOX R 25/14/3 E 23 12 2 LR 32 23 13 2 LR 26 ABRADUR 60 NC EE10-UM-60-GR / E 309Mo L-17 INOX R 25/20 E 25 20 R 32 20 R 26 ABRADUR 64 / E 310-16 E E25 10-UM-65-GR INOX B 25/20 E 25 20 B 42 E 25 20 B 20+ ABRADUR 65 / E 310-15 E 10-UM-65-G High alloyed, ABRADUR 66 special purpose electrodes E 10-UM-65-GR / INOX R 22/12/3 Fe / CrWC 600 E/ 10-UM-60-C / E 309Mo-16 INOX B 18/8/6 E 18 8 Mn B 22 E 18 8 Mn B 20+ E 307-15 Manganese alloyed hardfacing electrodes INOX R 18/8/6 Fe E 18 8 Mn R 53 18 8 Mn MPR33 160 / E 307-16 E Mn 14 EE7-UM-200-KP INOX R 18/8/6 E 18 8 Mn R 53 8 Mn R 26 E Mn 14 CR 4 / E 307-17 E E18 7-UM-200-KP PRODUCT PROGRAMME INOX R 29/9 E 29 9 R 12 E Mn 17 Cr 13 / E 29 9 R 26 / E 312-17 INOX R 29/9 Fe E 29 9 R 53 E Mn 17 Cr 10 Nb 3 / E 29 9 R 26 / E 312-26 INOX B 70/15 / EL NiCr 15 Fe Mn * E NiCrFe-3 * High cobalt alloyed electrodes and rods Durostels DUROSTEL 1 E E 20-UM-55-ZCT R Co Cr-C G/WSG-20-GO-55-ZCT DUROSTEL 1 P E Co AWS Cr-C PRODUCT EN DIN DUROSTEL 6 E E 20-UM-40-ZCT R Co Cr-A / DIN 8555 A-5.13 G/WSG-20-GO-45-ZCT DUROSTEL 6 P E Co Cr-A Hardfacing electrodes DUROSTEL 12 E E 20-UM-50-ZCT R Co Cr-B UTOP 38 E 3-UM-40-T / Co Cr-B G/WSG-20-GO-50-ZCT DUROSTEL 12 P E UTOP 43 E 3-UM-400-PT / DUROSTEL 21 E E 20-UM-300-CKZT / UTOP 45 E 3-UM-45-T / G/WSG-20-GO-300-CKZT DUROSTEL 21 P / UTOP 52 E 3-UM-60-T / G/WSG-20-GO-40-ZCT DUROSTEL FP / UTOP 55 E 6-UM-60-T / / DIN 8573 A-5.15 TOOLDUR E 4-UM-60-65 S E Fe 5-B Cast Iron electrodes E DUR 250 E 1-UM-250 / MONEL E NiCu G12 E E DUR 300 E 1-UM-300 / NiCu-B MONEL C E NiCu BG13 E E DUR 400 E 1-UM-400 / NiCu-B SUPER Ni E BG12 E E DUR 500 E Ni 1-UM-50 / Ni-Cl CAST E BG12 E E DURNi 600 E Ni 6-UM-60 / Ni-Cl CAST CR E 6-UM-55 Ni BG13 E E DURNi 60 E / Ni-Cl CAST E BG12 E E DURNiFe 600 Si E NiFe 6-UM-55 / NiFe-Cl CAST NiFe Co C E E3-UM-50-CTZ NiFe BG13 E NiFe-Cl TOOLDUR CAST B E 5-UM-CGP NiFe BG12 E NiFe-Cl E DURNiFe Cr 13 E / CAST NiFe BC E NiFe BG13 E NiFe-Cl Electrodes, producing abrasion resistant deposit CAST NiFe 10 E Ni BG12 E Ni-Cl ABRADUR 54 E 6-UM-55-G / CAST Fe E Fe-1 S 21 E St ABRADUR 58 / E 10-UM-60-G2 SL 250 E (FeC-2) BG 49 / ABRADUR 60 E 10-UM-60-GR / ABRADUR 64 / E 10-UM-65-GR ABRADUR 65 / E 10-UM-65-G ABRADUR 66 E 10-UM-65-GR /
G1 Page G2 G3 G4 K1 G5 K2 G6 K3 K4 H1 K5 H2 K6 H3 K7 H4 K8 H5 K9 H6 K10 H7 K11 H8 K12 H9 K13 H10 K14 H11 K15 I1 L1 I2 L2 I3 L3 I4 L4 I5 L5 L6 J1 L7 J2 J3 M1 J4 M2 J5 M3 J6 M4 J7 N1 N2I9 Page N3 N4 N5 K1 N6 K2 N7 K3 N8 K4 N9 K5 K6 K7 O1 K8 O2 K9 O3 K10 O4 K11 O5 K12 O6 K13 O7 K14 O8 K15 09 O10 L1 O11 L2 O12 L3 L4 I9 I10 L5 L6
UTOP 45 UTOP 52 UTOP 55 TOOLDUR E DUR 250 E DUR 300 E DUR 400 E DUR 500 E DUR 600 E DUR 60 R E DUR 600 Si TOOLDUR Co d.o.o. PRODUCT E DUR Cr 13 Electrodes, producing abrasion resistant deposit ABRADUR 54 ABRADUR 58 ABRADUR 60 PRODUCT EN ABRADUR 64 / ABRADUR Hardfacing65 electrodes ABRADUR UTOP 38 66 CrWC 600 UTOP 43 Manganese alloyed hardfacing electrodes UTOP 45 E Mn 14 UTOP 52 E Mn 14 UTOP 55CR 4 E Mn 17 Cr 13 TOOLDUR E Mn 17 Cr 10 Nb 3 DUR 250 E DUR 300 alloyed electrodes and rods Durostels High cobalt E DUR 400 1 E DUROSTEL E DUR 500 1 P DUROSTEL E DUR 600 6 E DUROSTEL E DUR 60 R 6 P DUROSTEL E DUR 600 Si DUROSTEL 12 E TOOLDUR Co DUROSTEL 12 P E DUR Cr 1321 E DUROSTEL Electrodes, producing abrasion resistant deposit DUROSTEL 21 P DUROSTEL FP ABRADUR 54 / ABRADUR 58 ABRADUR 60 Cast Iron electrodes ABRADUR 64 MONEL ABRADUR MONEL C 65 ABRADUR SUPER Ni 66 CrWC Ni 600 CAST CAST Ni C alloyed hardfacing electrodes Manganese CAST NiFe E Mn 14 CAST NiFe E Mn 14 CRC 4 PRODUCT CAST NiFe B E Mn 17 Cr 13 CAST NiFe BC E Mn 17 Cr 10 Nb 3 CAST NiFe 10 High cobalt alloyed electrodes and rods Durostels CAST Fe DUROSTEL 1E SL 250 DUROSTEL 1P DUROSTEL 6 E DUROSTEL 6 P EN DUROSTEL 12PRODUCT E / DUROSTEL 12 P DUROSTELfor 21 welding E Electrodes copper and aluminium alloys DUROSTEL BRON CuSn 21 P DUROSTEL BRON CuAl F P BRON CuMn / EL Cu Cast Iron electrodes MONEL ALU 99.5 MONEL C ALU Mn Ni SUPER ALU 5 Ni Si CAST ALU 12 Si CAST Ni C Electrodes CAST NiFe for cutting, gouging and preheating CAST NiFe1C SEKATOR / CAST NiFe2B SEKATOR A / CAST NiFe2BC SEKATOR B / CAST NiFe 10 TERMO CAST Fe EN 760 SL 250 Agglomerated welding fluxes and wires for S.A. welding AR 18.5 SA AR 1 88 AC I10 AR D1 SA AR 1 97 AC AR 18.1 SA AR 1 88 AC
E 3-UM-45-T E 3-UM-60-T E 6-UM-60-T E 4-UM-60-65 S E 1-UM-250 E 1-UM-300 E 1-UM-400 E 1-UM-50 E 6-UM-60 E 6-UM-55 E 6-UM-55 E3-UM-50-CTZ PROGRAMME E 5-UM-CGP E 6-UM-55-G E 10-UM-60-G2 E 10-UM-60-GR DIN E 10-UM-65-GR DIN 8555 E 10-UM-65-G E E 10-UM-65-GR 3-UM-40-T E E 10-UM-60-C 3-UM-400-PT E 3-UM-45-T E 7-UM-200-KP 3-UM-60-T 7-UM-200-KP EE 6-UM-60-T / E 4-UM-60-65 S / E 1-UM-250 E 1-UM-300 E E 1-UM-400 20-UM-55-ZCT E 1-UM-50 G/WSG-20-GO-55-ZCT E E 6-UM-60 20-UM-40-ZCT E 6-UM-55 G/WSG-20-GO-45-ZCT E E 6-UM-55 20-UM-50-ZCT E3-UM-50-CTZ G/WSG-20-GO-50-ZCT 5-UM-CGP E 20-UM-300-CKZT
K3 K4 K5 K6 K7 K8 K9 K10 K11 K12 K13 K14 K15 L1 L2 L3 Page L4 L5 L6 K1 L7 K2 K3 M1 K4 M2 K5 M3 K6 M4 K7 K8 K9 N1 K10 N2 K11 N3 K12 N4 K13 N5 K14 N6 K15 N7 N8 N9 L1 L2 L3 L4 O1 L5 O2 L6 O3 L7 O4 O5 O6 M1 O7 M2 O8 M3 09 M4 O10 O11 N1 O12 N2 N3 I10 N4 Page N5 N6 N7 N8 P1 N9 P2 P3 P4 O1 P5 O2 P6 O3 P7 O4 P8 O5 O6 O7 Q1 O8 Q2 09 Q3 O10 Q4 O11 O12
R1 I10 R2 R3
/ / / / E Fe 5-B / / / R Co Cr-C / E Co Cr-C / R Co Cr-A / E Co Cr-A / R Co Cr-B E Co Cr-B / G/WSG-20-GO-300-CKZT / G/WSG-20-GO-40-ZCT / E 6-UM-55-G / DIN 8573 A-5.15 E 10-UM-60-G2 E 10-UM-60-GR / / NiCu-B E 10-UM-65-GR E NiCu G12 E / NiCu-B E 10-UM-65-G E NiCu BG13 E 10-UM-65-GR / Ni-Cl E Ni BG12 E 10-UM-60-C / Ni-Cl E Ni BG12 E E Ni BG13 E Ni-Cl E NiFe BG12 E 7-UM-200-KP / NiFe-Cl E NiFe BG13 E / NiFe-Cl E 7-UM-200-KP PROGRAMME E E / NiFe BG12 / NiFe-Cl E NiFe BG13 E / / NiFe-Cl E Ni BG12 E Ni-Cl Fe-1 S 21 E St Cr-C EE 20-UM-55-ZCT R Co E (FeC-2) BG 49 / G/WSG-20-GO-55-ZCT E Co Cr-C R Co Cr-A E Co Cr-A DIN E 20-UM-50-ZCT R Co AWS Cr-B DIN 1733 / DIN 8555* A-5.6 G/WSG-20-GO-50-ZCT E Co Cr-B E 20-UM-300-CKZT / G/WSG-20-GO-300-CKZT / CuSn-A E CuSn-7 E G/WSG-20-GO-40-ZCT / CuAl-A2 E CuAl-8 E E 31-200cn E CuMnNiAl DIN 8573 * A-5.15 E CuMn2 ECu DIN 1732 A-5.3 E NiCu G12 E NiCu-B EL-Al 99.5 E-1100 E NiCu BG13 E NiCu-B EL-Al Mn E-3003 E Ni BG12 E Ni-Cl EL-Al Si5 E-4043 E Ni BG12 E Ni-Cl EL-AlSi 12 / E Ni BG13 E Ni-Cl E NiFe BG12 E NiFe-Cl E NiFe BG13 E NiFe-Cl / / E NiFe BG12 E NiFe-Cl / / E NiFe BG13 E NiFe-Cl / / / / E Ni BG12 E Ni-Cl E Fe-1 S 21 E St DIN 32 522 A-5.17 E (FeC-2) BG 49 /
G/WSG-20-GO-45-ZCT
E 20-UM-40-ZCT
BRON CuAl BRON CuMn EL Cu ALU 99.5 ALU Mn ALU 5 Si ALU 12 Si Electrodes for cutting, gouging and preheating SEKATOR 1 / SEKATOR 2 A / d.o.o. PRODUCT SEKATOR 2 B / TERMO EN 760 Agglomerated welding fluxes and wires for S.A. welding AR 18.5 SA AR 1 88 AC AR D1 SA AR 1 97 AC AR 18.1 SA AR 1 88 AC AB 100 SA AB 1 76 AC PRODUCT EN FB TT SA FB 1 55 AC H5 / FB 12.2 SA FB 1 65 AC H5 Electrodes for welding copper and aluminium FB CrNi SA FB alloys 2 63 DC BRON CuSn CS Cr 6 SA CS 1 96 AC BRON CuAl CS CrNi SA CS 2 99 AC BRON AB Cr CuMn SA AB 2 65 AC EL CS Cu 350 SA CS 3 97 AC FB 33 SA AF 2 54 DC ALU 99.5 AB 123 SA AB 1 67 AC H5 ALU Mn MS 200 SA MS 1 88 AC ALU 5 Si EN12072 / EN 1668* / ALU 12 Si EN 12070 ** Electrodes for cutting, gouging and preheating Welding rods SEKATOR 1 for TIG welding / SEKATOR 2A / TIG Mo WMoSi/W2Mo* SEKATOR / TIG CrMo 2 B W CrMo1 Si ** TERMO TIG 2 CrMo W CrMo2 Si ** TIG VAC 60 W 42 5 W 3 Si 1 * EN 760 TIG VAC 65 46 4W Si 1 * Agglomerated welding fluxes and wiresW for S.A. 4 welding TIG 19/9 NbSi W 91 Nb AR 18.5 SA19 AR 88Si AC TIGD1 19/9 NC Si W 19 91 L 97 Si AC AR SA AR TIG18.1 19/12/3 NbSi W 19 12 Nb Si AR SA AR 13 88 AC TIG100 19/12/3 NC Si W 19 12 3 LAC Si AB SA AB 1 76 TIGTT 25/14 NC Si W 23 12 L Si FB SA FB 1 55 AC H5 TIG12.2 18/8/6 Si W 18 81 Mn FB SA FB 65 AC H5 TIGCrNi 25/20 W 25 20 FB SA FB 2 63 DC TIGCr 29/9 W 29 9 1 96 AC CS 6 SA CS TIGCrNi 70/15 / CS 2 99 AC CS SA TIG 22/9/3 LN W 92 365 LNAC AB Cr SA22 AB TIG 625 / CS 350 SA CS 3 97 AC PRODUCT FB 33 SA AF 2 54 DC AB 123 SA AB 1 67 AC H5 MS 200 SA MS 1 88 AC PRODUCT EN12072 / EN 1668* / TIG Cu EN 12070 ** TIG CuAl8 TIG CuSn6 Welding rods for TIG welding CuAg TIG Cu TIG CuAl8 Mo WMoSi/W2Mo* CuMn TIG CrMo W CrMo1 Si ** TIG CuSn6 CuSi3 TIG TIG CuAg 2 CrMo W CrMo2 Si ** TIG TIG VAC 60 W 42 5 W EN 3 Si 1 * PRODUCT TIG CuMn TIG VAC 65 W 4 W 4 Si 1 * TIG CuSi3 EN46 440 TIG 19/9 NbSi W 19 9 Nb Si Welding wires for MAG (CO2) welding TIG 19/9 NC Si W 19 9 L Si PRODUCT EN VAC 60 G C/M G3 TIG 19/12/3 NbSi W 42 19 5 12 3 Nb SiSi1 EN 440C/M G 4 Si1 VAC 65 G TIG 19/12/3 NC Si W 46 19 4 12 3 L Si VAC 60 Ni C/M G 3 Ni1 Welding wires for MAG (CO2) welding G TIG 25/14 NC Si W 42 23 4 12 L Si 2 3Si1+ VAC 60 Ti Si G Si1 Ti TIG 18/8/6 W 42 18 5 8 C/M Mn G 3 60 CuNi 42 4 2 C/M G 4 0 Si1 VAC 65 G TIG 25/20 W 46 25 20 EN 12 12534* VAC 60 Ni G 4 C/M G 3 Ni1 TIG 29/9 W 42 29 9072/EN EN 10 97** Ti VAC 60 Ti G 2 0088-3 C/M G 3Si1+ TIG 70/15 / 42 E VAC 60 CuNi G 42 G0 TIG 22/9/3 LN W12070 22 2 9 C/M 3*** LN Welding EN TIG 625 wires for GMA welding / 12 072/EN 12534* EN 10Si 0088-3 97** MIG Mo G Mo *** E MIG CrMo G 12070 CrMo1*** Si *** MIG 2 CrMo G CrMo2 Si *** Welding wires for GMA welding 65 Mn3Ni1Mo MIG Mo G Mo Si ***
E CuAl-8 E 31-200cn * E CuMn2 DIN 1732 EL-Al 99.5 EL-Al Mn EL-Al Si5 EL-AlSi 12 / / PROGRAMME / / DIN 32 522 BAR 1 88 AC 10 SKM BAR 1 97 AC 10 SKM BAR 1 88 AC 10 SKM BAB 1 76DIN AC 10 BFB 1 55 AC10MHP5 DIN 1733 / DIN 8555* BFB 1 65 AC12MHP5 BFB 5 63 745 DC 8 K E CuSn-7 BCS 1 96 AC 12 B E CuAl-8 BCS 5 99 545 AC10KMB E 31-200cn BAB 5 65 545*AC 10B E CuMn2 BCS 3 97C CrMo AC8 DIN 1732 BFB 6 54255 DC 8K EL-Al BAB 199.5 67 AC 10 EL-Al Mn EL-Al Si5 / DIN 8575* DIN 8556 EL-AlSi 12 DIN 8559 ** / / SG Mo * / SG CrMo 1 * / CrMo 2 * SG SG-2 **522 DIN 32 SG-3 ** SG X5 CrNiNb 19 9 BAR 1 88 AC 10 SKM SG X2 CrNi 19 9 SKM BAR 1 97 AC 10
SG X5 12 BAR 1CrNiMoNb 88 AC 1019 SKM SG X2 CrNiMo 19 12 BAB 1 76 AC 10 SG X2 CrNi 24 12 BFB 1 55 AC10MHP5 SG X15 CrNiMn 18 8 BFB 1 65 AC12MHP5 SG X512 BFB 63CrNi 745 25 DC20 8K SG X10 CrNi BCS 1 96 AC 30 12 9 B SG NiCr20Nb BCS 5 99 545 (DIN1736) AC10KMB / BAB 5 65 545 AC 10B
E CuAl-A2 E CuMnNiAl ECu A-5.3 E-1100 E-3003 E-4043 / / / / / A-5.17 F7 A0EM 12K F7 A0EM 12K F7 A2EM 12K F6 A2EM AWS 12K F6 A4EM 12K A-5.6 F6 A4EM 12K / E / CuSn-A E / CuAl-A2 / E CuMnNiAl / ECu A-5.3 E-1100 F6 A4EM 12K E-3003 F7 A2EM 12K E-4043 A-5.9 / A-5.28* / A-5.18 ** / A-5.14 *** / / ER 70 S-A1 * / ER 80 S-G * / 90S-G ER ER70 S-6 ** A-5.17 ER70 S-6 ** ER 347 F7 A0EM 12K ER A0EM 308 L Si F7 12K ER A2EM 318 Si 12K F7 ER A2EM 316 L Si F6 12K ER 309 L Si F6 A4EM 12K ER 307 12K F6 A4EM ER 310 / ER 312 / ER NiCr-3 *** / ER / 2209 ERNiCrMo-3 / F6 A4EM 12K F7 A2EM 12K A-5.7 A-5.9 / A-5.28* ER CuSn A-5.18 ** / ER CuAl-A1 A-5.14 *** ER CuSn-A A-5.7 / CuSn ER ER CuAl-A1 70 S-A1 * / ER 80 S-G * ER CuSn-A CuSi-A ER ER 90S-G / ER70 S-6 ** AWS / ER70 S-6 ** ER CuSi-A A-5.18/A-5.28* ER 347 ER 308 L Si AWS ER S-6 ER 70 318 Si A-5.18/A-5.28* ER 70 S-6 ER 316 L Si ER 80 S-Ni1* ER 309 L Si S-2 ER 70 S-6 ER 307 80 S-6 S-G* ER 70 ER 310 A-5.9 / A-5.28 * ER 80 S-Ni1* ER 312 A-5.14 ** *** ER S-2 ER 70 NiCr-3 ER S-G* ER 80 2209 A-5.9 / A-5.28 * ERNiCrMo-3 A-5.14 ** ER 70 S-A1 * ER 80 S-G * ER 90S-G * 80 S-A1 S-Ni 1 ER 70 **
P2 P3 P4 P5 P6 P7 P8 Q1 Q2 Q3 Q4
R1 R2 R3 R4 Page R5 R6 R7 P1 R8 P2 R9 P3 R10 P4 R11 R12 P5 R13 P6 R14 P7 P8 Q1 Q2 S1 Q3 S2 Q4 S3 S4 S5 S13 R1 S14 R2 S15 R3 S16 R4 S17 R5 S18 R6 S19 R7 S20 R8 S21 R9 S22 R10 S23 R11 R12 I11 R13 R14 S24 S25 S26 S27 S24 S1 S28 S25 S2 S29 S26 S3 S27 S4 Page S28 S5 S29 S13 S14 Page S4 S15 S5 S16 S6 S17 S7 S4 S18 S8 S5 S19 S6 S20 S7 S21 S8 S22 S23 S1 I11 S2 I11 S3 S9 S1
/ BCS 3 97C CrMo AC8 PROGRAMME BFB 6 54255 DC 8K BAB 1 67 AC 10 DIN 1733 PROGRAMME DIN 8556 / DIN 8575* SG-CuSn DIN 8559 ** SG-CuAl8 SG-CuSn6 DIN 1733 SG-CuAg SG-CuSn SG Mo * SG-CuMn13Al7 SG-CuAl8 SG CrMo 1 * SG-CuSi3 SG-CuSn6 SG CrMo 2 * SG-CuAg SG-2 ** DIN SG-CuMn13Al7 SG-3 ** SG-CuSi3 DIN 8559 SG X5 CrNiNb 19 9 SG X2 CrNi 19 9 DIN SG-2 SG X5 CrNiMoNb 19 12 DIN 8559 SG-3 SG X2 CrNiMo 19 12 / SG X2 CrNi 24 12 / SG-2 SG X15 CrNiMn 18 8 / SG-3 SG X 12 CrNi 25 20 DIN 8556 / DIN / SG X10 CrNi 308575* 9 / SG NiCr20Nb (DIN1736) / / DIN 8556 / DIN 8575* / SG Mo * SG CrMo 1 * SG CrMo 2 * / Mo * SG
Welding wires for MAG (CO2) welding VAC 60 G 42 5 C/M G 3 Si1 SG-2 VAC 65 G 46 4 C/M G 4 Si1 SG-3 VAC 60 Ni G 42 4 C/M G 3 Ni1 / VAC 60 Ti G 42 2 C/M G 3Si1+ Ti / VAC 60 CuNi G 42PRODUCT 2 C/M G 0 / d.o.o. PROGRAMME EN 12 072/EN 12534* DIN 8556 / DIN 8575* EN 10 0088-3 97** DIN 1733 E 12070 *** TIG Cu wires for GMA welding SG-CuSn Welding TIG CuAl8 SG-CuAl8 MIG Mo G Mo Si *** SG Mo * TIG CuSn6 SG-CuSn6 MIG CrMo G CrMo1 Si *** SG CrMo 1 * TIG CuAg SG-CuAg MIG 2 CrMo G CrMo2 Si *** SG CrMo 2 * TIG CuMn SG-CuMn13Al7 MIG 65 Mn3Ni1Mo / TIG CuSi3 SG-CuSi3 MIG 75 Mn3Ni1CrMo* / MIG 90 89 6 M GMn4Ni2CrMo / PRODUCT ENCr17** DIN MIG 17 G17 , X6 / MIG 19/9 Nb Si G 19 9 Nb SG 8559 X5 CrNiNb 19 9 EN 440 DIN MIG 19/9 wires NC Si for MAG (CO2) welding G 19 9 L Si SG X5 CrNi 19 9 Welding SG X5 CrNiMoNb 19 12 MIG Nb Si G 42 19 5 12 3 Nb SiSi1 VAC19/12/3 60 G C/M G3 SG-2 MIG NC Si G 46 19 4 12 3 LG Si SG X2 CrNiMo 19 12 VAC19/12/3 65 G C/M 4 Si1 SG-3 MIG G 42 23 4 12 L Si VAC25/14 60 Ni NC Si G C/M G 3 Ni1 / SG X2 CrNi 24 12 MIG G 42 18 2 8 C/M Mn G 3Si1+ Ti / SG X 15 CrNiMn 18 8 VAC18/8/6 60 Ti Si G MIG G 42 25 2 20 VAC25/20 60 CuNi G C/M G 0 / SG X 12 CrNi 25 20 MIG 29/9 G 29 SG 8556 X10 CrNi 30 9 EN 129072/EN 12534* DIN / DIN 8575* SG NiCr20Nb (DIN1736) MIG 70/15 / 10 0088-3 97** EN MIG 22/9/3 LN G12070 22 9 3*** LN / E MIG 625 / / Welding wires for GMA welding DIN 1733 MIG Mo G Mo Si *** SG Mo * MIG SG-CuSn MIG Cu CrMo G CrMo1 Si *** SG CrMo 1 * MIG SG-CuAl8 MIG CuAl8 2 CrMo G CrMo2 Si *** SG CrMo 2 * MIG MIG CuSn6 65 Mn3Ni1Mo / SG-CuSn6 MIG MIG CuAg 75 Mn3Ni1CrMo* / SG-CuAg MIG MIG CuMn 90 89 6 M GMn4Ni2CrMo / SG-CuMn13Al7 MIG CuSi3 MIG 17 G17 , X6 Cr17** / SG-CuSi3 EN 12 536 DIN 8554 MIG 19/9 Nb Si G 19 9 Nb SG X5 CrNiNb 19 9 Welding for oxyacetilene- welding G 19 9 L Si MIG 19/9 rods NC Si SG X5 CrNi 19 9 SG VP 37 O 19 I 12 3 Nb Si G IX5 CrNiMoNb 19 12 MIG 19/12/3 Nb Si G VP 40 O 19 II 12 3 L Si G II MIG 19/12/3 NC Si G SG X2 CrNiMo 19 12 VP 42 O 23 III 12 L Si G III MIG 25/14 NC Si G SG X2 CrNi 24 12 VP Mo O 18 IV 8 Mn G IV MIG 18/8/6 Si G SG X 15 CrNiMn 18 8 VP CrMo O 25 V 20 GV MIG 25/20 G SG X 12 CrNi 25 20 MIG 29/9 G 29 9 / EN 12072 SG X10 CrNi 30 98556 EN 756* DIN 8557* / DIN SG NiCr20Nb (DIN1736) MIG 70/15 /EN 10 088** MIG 22/9/3 LN G 22 9 3 LN / Wires and strips for submerged arc welding MIG 625 /S 2 * /S 2 * EPP 2 PRODUCT PROGRAMME DIN EPP 2 Mo S 2 Mo * S 2 1733 Mo * MIG Cu SG-CuSn MIG CuAl8 SG-CuAl8 EPP S3 * S3 * MIG 3 CuSn6 SG-CuSn6 EPP Cr X 6 Cr 17** MIG 17 CuAg SG-CuAg EPP NC S 19 9 L UP X2 CrNi 19 9 MIG 19/9 CuMn SG-CuMn13Al7 EPP S 19 12 3 L UP X2 CrNiMo 19 12 MIG 19/12/3 CuSi3 NC SG-CuSi3 EPP 18/8/6 S 18 8 Mn UP X 15 CrNiMn 18 8 EN 12 536 DIN 8554 INOX TR Cr 17 / UP X8 Cr 18 Welding rods for oxyacetilene- welding / INOX TR 19/9 UP X2 CrNi 19 9 VP 37 OI GI VP 40 O II G II VP 42 O III G III VP Mo O IV G IV VP CrMo OV GV EN 756* / EN 12072 DIN 8557* / DIN 8556 EN 10 088** Wires and strips for submerged arc welding EPP 2 S2 * S2 * EPP 2 Mo S 2 Mo * S 2 Mo *
ER 70 S-6 S4 ER 70 S-6 S5 S6 ER 80 S-Ni1* ER 70 S-2 S7 ER 80 S-G* S8 A-5.9 / A-5.28 * A-5.14 ** A-5.7 ER CuSn S24 ER CuAl-A1 S25 ER 70 S-A1 * S1 ER CuSn-A S26 ER 80 S-G * S2 / ER 90S-G * S27 S3 / ER 80 S-Ni 1 * S28 S9 ER CuSi-A S29 ER 100 S-1 * S10 ER 120 S-1 * S11 AWS Page ER 430 S12 ER 347 Si S13 A-5.18/A-5.28* ER 308 L Si S14 ER 318 Si S15 ER 70 S-6 S4 ER 316 L Si S16 ER 70 S-6 S5 L Si S17 S6 ER ER309 80 S-Ni1* ER 307 S18 ER 70 S-2 S7 ER 310 S19 ER 80 S-G* S8 ER 312 S20 A-5.9 / A-5.28 * ER NiCr-3 S21 A-5.14 ** ** ER 2209 S22 ERNiCrMo-3 ** S23 A-5.7 ER 70 S-A1 * S1 ER CuSn S24 ER 80 S-G * S2 ER CuAl-A1 S25 ER 90S-G * S3 ER CuSn-A S26 ER 80 S-Ni 1 * S9 / 100 S-1 * S27 ER S10 / 120 S-1 * S28 ER S11 ER CuSi-A S29 ER 430 S12 A-5.2 ER 347 Si S13 ER 308 L Si S14 R 45 T1 ER 318 Si S15 R 60 T2 ER 316 L Si S16 R 60 T3 ER 309 L Si S17 R 65 T4 ER 307 S18 R 65 T5 ER 310 S19 ER 312 /A-5.23* S20 A-5.17 ER NiCr-3 ** S21 /A-5.9** ER 2209 S22 ERNiCrMo-3 ** S23 EM 12 K A-5.7 EA 2 * ER CuSn S24 ER CuAl-A1 S25 I12 EM 13 K ER CuSn-A S26 / ER 430 ** S27 / ER 308 L ** S28 U1 ERCuSi-A 316 L ** ER S29 ER 307 ** A-5.2 / / R 45 T1 R 60 T2 R 60 T3 R 65 T4 R 65 T5 A-5.17 /A-5.23* /A-5.9** EM 12 K EA 2 *
I12
I12
d.o.o.
PRODUCT PROGRAMME
DIN AWS A-5.18/A-5.19* A-5.20/A-5.29*
E 70 C-& MH4 E 71 T-1 MH4 E110C-K4H4* E111T1-K4H4*
PRODUCT EN Flux cored wires for MIG MAG welding Metalic type EN 758 / EN 12535 * FILTUB 12 M FILTUB 32 M Rutile typ FILTUB 4 R FILTUB 5 R FILTUB 6 R FILTUB 7 R FILTUB 8 R Basic typ FILTUB 12 B FILTUB 14 B FILTUB 16 B FILTUB 18 B FILTUB 19 B FILTUB 25 B FILTUB 28 B FILTUB 32 B FILTUB 36 B FILTUB 38 B FILTUB 40 B FILTUB 42 B For hardfacing FILTUB DUR 3 FILTUB DUR 4 FILTUB DUR 5 FILTUB DUR 12 FILTUB DUR 14 FILTUB DUR 15.1 FILTUB DUR 16 FILTUB UTOP 38 FILTUB UTOP 55 FILTUB UTOP Co FILTUB UTOP Mo1 Flux cored wires for S.A.-welding FILTUB 112 FILTUB 114 FILTUB 116 FILTUB 118 FILTUB 126 FILTUB 128 FILTUB 132 FILTUB 136 FILTUB 138 FILTUB 140 For hardfacing FILTUB DUR 205 FILTUB DUR 212 FILTUB DUR 214 FILTUB DUR 215 FILTUB DUR 12Cr2NiMo FILTUB DUR 13Cr3NiMoV T 46 4 M M 1 H5 T 69 4 Mn 2Ni Cr Mo M M 1 H5 *
Page
V1 V2
EN 758/EN12071* T 46 4 PM1 H5/ T 46 4 PC1 HST T 46 A 1 NiCrCuP M1 T 42 AZ PC1 H5 / T AZ PM1 HST T 46 4 1Ni PM1 T Mo LPM1 H5 * EN 758/EN12071* EN 12535 T 42 4B C3 H5 / T 42 4B M3 H5 T Mo LBC3 H5 / T Mo LBM3 H5 * T CrMo1 BC3 H5 / T CrMo1 M3 H5 * T CrMo2 BC3 H5 / T CrMo2 M3 H5 * T CrMo2 BC3 H5 / T CrMo2 M3 H5 * / T 50 61NiMoBC3 H5 / T 50 61NiMoBM3 H5 T 69 6 Mn2NiCrMo B M (C)3 H5 T 42 6 2Ni B M3 H5 T 89 4 Mn2Ni1CrMo BM3 H5 T 46 6 ZB C3 H5/ T 46 6 ZB M3 H5 / DIN 8555
A-5.29/A-5.20 * E 71 T-1 * E 71 T1-G E 71 T1-G E 81 T1-Ni 1 E 81 T1-A1 A-5.29/A-5.20 * E 70 T-5 M4 * E 80 T5-G E 80 T5-B2 E 80 T5-G E 90 T5-G E 90 T5-G E 90 T5-G E 110 T5-K4 E 90 T5-G E 120 T5-G E 80 T5-G E 110 T5-G
V3 V4 V5 V6 V7 V8 V9 V10 V11 V12 V13 V14 V15 V16 V17 V18 V29
MSG1-GF-M21-250/MSG1-GF-C1-250 MSG1-GF-M21-300/MSG1-GF-C1-300 MSG1-GF-M21-350/MSG1-GF-C1-350-P MSG5-GF-M21-40-P/MSG5-GF-C1-40-P MSG6-GF-M21-55-GP/MSG6-GF-L1-55-GP MSG5 -GF-M21-50-P/MSG5-GF-C1-50-P MSG6-GF-M21-60-GP/MSG6-GF-C1-60-GP MSG5-GF-M21-40-P/MSG5-GF-C1-40-P MSG6-GF-M21-55-GP/MSG6-GF-C1-55-GP MSG 6-GF-M21-55-GP/MSG6-GF-C1-55-GP MSG 5-GF-M21-50-GP/MSG5-GF-C1-50-GP
V20 V21 V22 V23 V24 V25 V26 V27 V28 V29 V30 V31 V32 V33 V34 V35 V36 V37 V38 V39 V40
A 5.23 F7 A4-EC-G F7 A4-EC-A4 F8 P0-EC-B2 F8 PO-EC-B3 F7 A8-EC-G F9 A8-EC-G F11 A8-EC-F5 F7 A15-EC-Ni2 F12 A4-EC-G F7 A4-EC-G DIN 8555 UP1-GF-BFB-165-350 UP5-GF-BFB4 652-40 UP6-BFB4 652 - 50 UP5-GF-BFB4 652-55 UP5-GF-BFB 165-400 UP5-GF-BFB 165-40
I13
d.o.o.
PRODUCT PROGRAMME
EN 12073 UP5-GF-BCS 256-40 A-5.22 E 308L T0-1 / E 308L T0-4 E 316L T0-1 / E 316L T0-4 E 309L T0-1 / E 309L T0-4 E 307 T0-1 / E 307 T0-4 V47 V48 V49 V50 V51
FILTUB DUR 17 Cr For welding stainless steel FILCORD 308 L FILCORD 316 L FILCORD 309 L FILCORD 307
PRODUCTION PROGRAM
PRODUCT
Electrodes INOX B 13 Fe INOX B 13/1 Fe INOX B 13/4 Fe INOX B 17 Fe INOX B 17MoFe INOX R 19/9 Nb INOX B 19/9 Nb INOX R 19/9 NC INOX R 19/12/3 Nb INOX B 19/12/3 Nb INOX R 19/12/3 NC INOX R 19/13/4 L INOX R 22/9/3 LN INOX R 20/25 L INOX B 20/25 L INOX R 25/4 Fe INOX R 25/14 NC INOX R 25/14/3 NC INOX R 25/20 INOX B 25/20 INOX B 18/8/6 INOX R 18/8/6 INOX R 29/9 INOX B 70/15 BRON CuSn BRON CuAl BRON CuMn EL Cu ALU 99.5 ALU Mn ALU 5 Si
W. Nr.
~1.4009 ~1.4018 ~1.4351 ~1.4015 1.4115 1.4551 1.4551 1.4316 1.4576 1.4576 1.4430 1.4453 1.4462 ~1.4539 ~1.4539 ~1.4820 1.4332 1.4459 1.4842 1.4842 1.4370 1.4370 1.4337 ~2.4620 2.1025 ~2.0926 ~2.1368 ~2.1363 3.0259 3.0516 ~3.2245
Page
G1 G2 G3 G5 G6 H1 H2 H3 H4 H5 H6 H7 H8 H10 H11 I1 I2 I3 I4 I5 J2 J4 J5 J7 P1 P2 P3 P4 P5 P6 P7
PRODUCT
Rods and wires ALU 12 Si TIG / MIG Mo TIG / MIG CrMo TIG CrMo / MIG 2 CrMo TIG VAC 60 / VAC 60 TIG VAC 65 / VAC 65 VAC 60 Ti MIG 17 TIG / MIG 19/9 NbSi TIG / MIG 19/9 NC Si TIG / MIG 19/12/3 NbSi TIG / MIG 19/12/3 NC Si TIG / MIG 25/14 NC Si TIG / MIG 18/8/6 Si TIG / MIG 25/20 TIG / MIG 29/9 TIG/MIG 70/15 TIG /MIG 22/9/3 LN TIG/MIG 625 TIG / MIG Cu TIG / MIG CuAl 8 TIG / MIG CuSn 6 TIG / MIG CuAg TIG / MIG CuMn TIG / MIG CuSi 3 VP 37 VP 40 VP 42 VP Mo VP CrMo
W. Nr.
~3.2585 1.5424 1.7339 1.7384 1.5125 1.5130 1.5125 1.4502 1.4551 1.4316 1.4576 1.4430 1.4332 1.4370 1.4842 1.4337 2.4806 1.4462 1.4831 2.1006 2.0921 2.1022 2.1211 2.1367 2.1461 ~1.1116 1.0495 ~1.6215 1.5425 ~1.7346
Page
P8 S1 S2 S3 S4 S5 S7 S12 S13 S14 S15 S16 S17 S18 S19 S20 S21 S22 S23 S24 S25 S26 S27 S28 S29 T1 T2 T3 T4 T5
I14
I14
ALPHABETICAL LIST
d.o.o.
OF WELDING CONSUMABLES
Welding electrodes ABRADUR 54 ABRADUR 58 ABRADUR 60 ABRADUR 64 ABRADUR 65 ABRADUR 66 ALU 12Si ALU 5 Si ALU 99.5 ALU Mn BRON CuAl BRON CuMn BRON CuSn CAST Fe CAST Ni CAST Ni C CAST NiFe CAST NiFe C CAST NiFe 10 CAST NiFe B CAST NiFe B C CELEX CELEX Mn CELEX Mo CELEX Ni CELEX NiMo CrWC 600 DUROSTEL 1 E DUROSTEL 1 P DUROSTEL 12 E DUROSTEL 12 P DUROSTEL 21 E DUROSTEL 21 P DUROSTEL 6 E DUROSTEL 6 P DUROSTEL F P E DUR 250 E DUR 300 E DUR 400 E DUR 500 E DUR 600 E DUR 600 Si E DUR Cr13 E DUR 60 R E Mn 14 E Mn 14 CR 4 E Mn 17 Cr 10 Nb 3 E Mn 17 Cr 13 EL Cu E Ti 2 CrMo E Ti 5 CrMo E Ti CrMo E Ti Mo E Ti MoV EMONA EVB 100
Page L1 L2 L3 L4 L5 L6 P8 P7 P5 P6 P2 P3 P1 O11 O4 O5 O6 O7 O10 O8 O9 A3 A4 A5 A6 A7 L7 N1 N2 N5 N6 N7 N8 N3 N4 N9 K7 K8 K9 K10 K11 K13 K15 K12 M1 M2 M4 M3 P4 F4 F5 F3 F1 F2 A12 D14
Welding electrodes EVB 100 EKSTRA EVB 2 CrMo EVB 2.5 Ni EVB 2.5 NiMo EVB 3 CrMoV EVB 45 EVB 47 EVB 5 CrMo EVB 50 EVB 55 EVB 60 EVB 62 EVB 65 EVB 75 EVB 80 EVB 9 CrMo EVB 9 CrMoV EVB 91 CrMoV EVB 911 W EVB CrMo EVB CrMoV EVB CrNiMo EVB CuNi EVB CuNiCr EVB EXTRA EVB K EVB Mo EVB Mo1Cr EVB MoV EVB Ni EVB NiMo EVB P24 EVB S EVB SP2 GALEB 50 GALEB 70 INOX B 13 Fe INOX B 13/1 Fe INOX B 13/4 Fe INOX B 13/6 Fe INOX B 17 Fe INOX B 17 MoFe INOX B 18/8/6 INOX B 19/9 Nb INOX B 25/20 INOX B 70/15 INOX R 18/8/6 INOX R 18/8/6 Fe INOX R 19/12/3 Nb INOX B 19/12/3 Nb INOX R 19/12/3 NC INOX R 19/13/4 L INOX R 19/9 Nb INOX R 19/9 NC INOX R 20/10/3 L INOX R 20/25 L
Page D15 E4 D8 D9 E9 C4 C5 E6 C1 C2 D1 D10 D2 D11 D13 E7 E10 E11 E12 E3 E8 D12 D4 D5 C3 C8 E1 E13 E2 D3 D6 E5 C6 D16 C7 D7 G1 G2 G3 G4 G5 G6 J2 H2 I5 J7 J4 J3 H4 H5 H6 H7 H1 H3 H9 H10
II1
ALPHABETICAL LIST
d.o.o.
OF WELDING CONSUMABLES
Welding electrodes INOX R 22/12/3 Fe INOX R 22/9/3 LN INOX R 25/14 NC INOX R 25/14/3 NC INOX R 25/4 Fe INOX R 25/20 INOX R 29/9 INOX R 29/9 Fe JADRAN S MONEL MONEL C NEUTRAL RAPID RUTILEN 1000 S RUTILEN 12 RUTILEN 13 RUTILEN 13 M RUTILEN 2000 S RUTILEN E RUTILEN K RUTILEN S RUTILEN X Welding fluxes AB 100 AB Cr AR 18.1 AR 18.5 AR D1 CS 350 CS Cr 6 Welding rods, wires and strips EPP 17 Cr EPP 18/8/6 EPP 19/12/3 NC EPP 19/9 NC EPP 2 EPP 2 Mo EPP 3 INOX TR 19/9 INOX TR Cr 17 MIG 17 MIG 18/8/6 Si MIG 19/12/3 Nb Si MIG 19/12/3 NC Si MIG 19/9 Nb Si MIG 19/9 NC Si MIG 2 CrMo MIG 22/12/3 LN MIG 25/14 NC Si MIG 25/20 MIG 29/9 MIG 70/15 MIG 625 MIG 65
Page J1 H8 I2 I3 I1 I4 J5 J6 A8 O1 O2 A1 A2 A11 A9 A13 A17 A15 A19 A16 A18 A14 Page R4 R10 R3 R1 R2 R11 R8 Page U1 U1 U1 U1 U1 U1 U1 U1 U1 S12 S18 S15 S16 S13 S14 S3 S22 S17 S19 S20 S21 S 23 S9
Welding electrodes RUTILEN Z SAVA 130 SAVA 150 SAVA 150 AR SAVA 150 B SAVA 180 SAVA 200 SAVA GV 130 SAVA GV 160 SEKATOR 1 SEKATOR 2 A SEKATOR 2 B SL 250 SUPER Ni TOOLDUR TOOLDUR Co TERMO UTOP 38 UTOP 43 UTOP 45 UTOP 52 UTOP 55 Welding fluxes CS CrNi FB 12.2 FB CrNi FB TT FB 33 AB 123 MS 200 Welding rods, wires and strips MIG 75 MIG CrMo MIG Mo MIG Cu MIG CuAg MIG CuSi3 MIG CuSn6 MIG CuAl8 MIG CuMn TIG 18/8/6 Si TIG 19/12/3 Nb Si TIG 19/12/3 NC Si TIG 19/9 NbSi TIG 19/9 NC Si TIG 2 CrMo TIG 22/9/3 LN TIG 25/14 NC Si TIG 25/20 TIG 29/9 TIG 70/15 TIG 625 TIG CrMo TIG Mo
Page A10 B1 B2 B8 B7 B3 B4 B5 B6 Q1 Q2 Q3 O12 O3 K6 K14 Q4 K1 K2 K3 K4 K5 Page R9 R6 R7 R5 R12 R13 R14 Page S10 S2 S1 S24 S27 S29 S26 S25 S28 S18 S14 S15 S12 S13 S3 S22 S16 S19 S20 S21 S23 S2 S1
II2
ALPHABETICAL LIST
d.o.o.
OF WELDING CONSUMABLES
Welding rods, wires and strips TIG Cu TIG CuAg TIG CuSi3 TIG CuSn6 TIG CuAl8 TIG VAC 60 TIG VAC 65 VAC 60 VAC 60 CuNi Flux cored wires FILCORD 307 FILCORD 308 L FILCORD 309 L FILCORD 316 L FILTUB 112 FILTUB 114 FILTUB 116 FILTUB 118 FILTUB 12 B FILTUB 12 M FILTUB 126 FILTUB 128 FILTUB 132 FILTUB 136 FILTUB 138 FILTUB 14 B FILTUB 140 FILTUB 16 B FILTUB 18 B FILTUB 19 B FILTUB 25 B FILTUB 28 B FILTUB 32 B FILTUB 32 M FILTUB 36 B FILTUB 38 B
Page S24 S27 S29 S26 S25 S4 S5 S4 S8 Page V51 V48 V50 V49 V31 V32 V33 V34 V8 V1 V35 V36 V37 V38 V39 V9 V40 V10 V11 V12 V13 V14 V15 V2 V16 V17
Page S6 S7 S5 T1 T2 T3 T5 T4
Flux cored wires FILTUB 4 R FILTUB 40 B FILTUB 42 B FILTUB 5 R FILTUB 6 R FILTUB 7 R FILTUB 8 R FILTUB DUR 12 FILTUB DUR 12Cr2NiMo FILTUB DUR 13Cr3NiMoV FILTUB DUR 14 FILTUB DUR 15 FILTUB DUR 16 FILTUB DUR 17 Cr FILTUB DUR 205 FILTUB DUR 212 FILTUB DUR 214 FILTUB DUR 215 FILTUB DUR 3 FILTUB DUR 4 FILTUB DUR 5 FILTUB UTOP 38 FILTUB UTOP 55 FILTUB UTOP Co FILTUB UTOP Mo1
Page V3 V18 V19 V4 V5 V6 V7 V23 V45 V46 V24 V25 V26 V47 V41 V42 V43 V44 V20 V21 V22 V27 V28 V29 V30
II3
d.o.o.
WELDING CONSUMABLES
LOW ALLOYED CELLULOSIC, RUTILE AND ACID ELECTRODES ... A HIGH EFFICIENCY ELECTRODES . B BASIC, LOW HYDROGEN ELECTRODES ..... C MEDIUM ALLOYED BASIC ELECTRODES FOR WELDING FINEGRAINED STEELS . D MEDIUM AND HIGH ALLOYED BASIC ELECTRODES FOR WELDING CREEP RESISTANT STEELS ... E MEDIUM ALLOYED RUTILE ELECTRODES FOR WELDING CREEP RESISTANT STEELS ... F HIGH ALLOYED FERRITIC STAINLESS STEEL ELECTRODES .... G HIGH ALLOYED AUSTENITIC AND AUSTENITIC-FERRITIC STAINLESS STEEL ELECTRODES .. .. H HIGH ALLOYED HEAT RESISTANT STAINLESS STEEL ELECTRODES ..... I HIGH ALLOYED SPECIAL PURPOSE ELECTRODES ... J HARDFACING ELECTRODES .. K ELECTRODES, PRODUCING ABRASION RESISTANT DEPOSIT ... L MANGANESE ALLOYED HARDFACING ELECTRODES M HIGH COBALT ALLOYED ELECTRODES AND RODS DUROSTELS ...... N CAST IRON ELECTRODES ... O ELECTRODES FOR WELDING COPPER AND ALUMINIUM ALLOYS P ELECTRODES FOR CUTTING, GOUGING AND PREHEATING Q AGGLOMERATED WELDING FLUXES AND WIRES FOR S.A.-WELDING . R WELDING RODS FOR TIG-WELDING . S WELDING WIRES FOR MAG(CO2)-WELDING WELDING WIRES FOR GMA-WELDING WELDING RODS FOR OXYACETILENE-WELDING T WIRES AND STRIPS FOR SUBMERGED ARC WELDING U FLUX-CORED WIRES .. V
III
NEUTRAL . A1 RAPID.. A2 CELEX . A3 CELEX Mn A4 CELEX Mo A5 CELEX Ni .. A6 CELEX NiMo . A7 JADRAN S . A8 RUTILEN 12 . A9 RUTILEN Z .. A10 RUTILEN 1000 S . A11 EMONA A12 RUTILEN 13 A13 RUTILEN X ... A14 RUTILEN 2000 S . A15 RUTILEN K . A16 RUTILEN 13 M A17 RUTILEN S .. A18 RUTILEN E A19
Classification:
EN 499: DIN 1913: AWS A-5.1: EN ISO 2560-A: EN ISO 2560-B: E 35 A A 13 E 43 10 A 2 E 35 AA 13 E 43 40 A
d.o.o.
NEUTRAL
Base materials:
Unalloyed steels: Thin sheets: DIN: St 33 to St 42.3 1623/1 W.Nr.: 1.0035 to 1.0136, 1.1013
Coating type:
Acid (oxydising)
Welding current:
AC DC -/+
Mn 0.40
Welding positions:
Mechanical properties: Yield strength Tensile strength ReL / Rp 0.2: Rm: A5: KV: > 330 420 470 > 20 > 55 MPa (N/mm ) MPa (N/mm ) % J ( +20C)
2 2
Redrying temperature:
140C / 1 h Elongation Impact energy
3.25 4 5 6
approximate data
REF. E 001 - A / SP
Date:2004-06-28
A1
Classification:
EN 499: DIN 1913: AWS A-5.1: EN ISO 2560-A: EN ISO 2560-B: E 38 2 RA 13 E 43 33 AR 7 E 6020 E 38 2 RA 13 E 43 20 A
d.o.o.
RAPID
Base materials:
Unalloyed steels: Boiler plates: Pipe steels: Shipbilding plates: Steel castings: DIN: St 33 to St 52.3 HI, HII, 17 Mn 4 St 35 to St 45.8 A, B, D, E GS-38, GS-45 W.Nr.: 1.0035 to 1.0570 1.0345, 1.0425 1.0308 to 1.0405 1.0440, 1.0472, 1.0475, 1.0476 1.0416, 1.0443
Coating type:
Acid-rutile
Welding current:
AC DC -
Mn 0.60
Welding positions:
Mechanical properties: Yield strength Tensile strength ReL / Rp 0.2: Rm: A5: KV: > 360 450 - 550 > 24 > 47 MPa (N/mm ) MPa (N/mm ) % J ( - 20C)
2 2
Redrying temperature:
140C / 1 h Elongation Impact energy
2.5 3.25 4 5 6
approximate data
REF. E 060 - A / M
Date: 2011-12-23
A2
Classification:
EN 499: DIN 1913: AWS A-5.1: EN ISO 2560-A: EN ISO 2560-B: E 38 2 C 21 E 43 53 C 4 E 6010 E 38 2 C 21 E 43 10 A
d.o.o.
CELEX
Base materials:
API Spec. 5L: Grade A, B, X42, X46, X52, X56, as the root pass up to API grade X 80 DIN 17172: Grade StE 210.7, StE 240.7.StE 290.7 (TM), StE 320.7 (TM), StE 360.7 (TM), as well as the root pass up to StE 550.7 (TM) DIN 17100: St 37-3, St 52-3 DIN 17155: St 35.8, St 45.8 H I, H II
Coating type:
Cellulosic
Welding current:
DC + DC (for root beads)
Mn 0.8
Welding positions:
Mechanical properties: Yield strength Tensile strength ReL / Rp 0.2: Rm: A5: KV: > 390 MPa (N/mm )
2 2
Redrying temperature:
Not permitted Elongation Impact energy
approximate data
REF. E 153 - A / M
Date:2011-12-18
A3
Classification:
EN 499: DIN 1913: AWS A-5.5: EN ISO 2560-A: EN ISO 2560-B: E 42 2 C 21 E 51 53 C 4 E 7010-G E 42 2 C 21 E 49 10 A
d.o.o.
CELEX Mn
Base materials:
API Spec. 5L: Grade X42, X46, X52, X56, X60 and the root pass up to API grade X 70 DIN 17172: Grade StE 290.7 (TM), StE 320.7 (TM), StE 360.7 (TM), StE 385.7 (TM), StE 415.7 (TM) as well as the root pass up to StE 480.7 (TM) DIN 17100: St 37-3, St 52-3 DIN 17155: St 35.8, St 45.8
Coating type:
Cellulosic
Welding current:
DC + DC (for root beads)
Mn 1.3
Welding positions:
Mechanical properties: Yield strength Tensile strength ReL / Rp 0.2: Rm: A5: KV: > 420 MPa (N/mm) 510 610 MPa (N/mm ) > 20 > 70 > 47 % J (+20C) J (-20 C)
2
Redrying temperature:
Not permitted Elongation Impact energy
approximate data
REF. E 155 - A / SP
Date:2005-07-07
A4
Classification:
EN 499: AWS A-5.5: EN ISO 2560-A: EN ISO 2560-B: E 42 3MoC 21 E 7010-A1 E 42 3 MoC 21 E 49 10 A
d.o.o.
CELEX Mo
Base materials:
API Spec. 5L: Grade X42, X46, X52, X56, X60 and the root pass up to API grade X 80 DIN 17172: Grade StE 290.7 (TM), StE 320.7 (TM), StE 360.7 (TM), StE 385.7 (TM), StE 415.7 (TM) as well as the root pass up to StE 550.7 (TM) DIN 17100: St 37-3, St 52-3 DIN 17155: St 35.8, St 45.8 St-WstE 255-355
Coating type:
Cellulosic
Welding current:
DC + DC (for root beads)
Mn 0.9
Mo 0.5
Welding positions:
Mechanical properties: Yield strength Tensile strength ReL / Rp 0.2: Rm: A5: KV: > 420 MPa (N/mm
2 2
Redrying temperature:
Not permitted Elongation Impact energy
approximate data
REF. E 154 - A / MS
Date:2012-12-23
A5
Classification:
EN 499: AWS A-5.5: EN ISO 2560-A: EN ISO 2560-B: E 46 3 1 NiC 21 E 8010-G E 46 3 1 NiC 21 E 55 10-N1 A
d.o.o.
CELEX Ni
Base materials:
API Spec. 5L: Grade X56, X60, X65, X70. DIN 17172: Grade StE 385.7 (TM), StE 415.7 (TM), StE 455.7 (TM) as well as the root pass up to StE 550.7 (TM)
Coating type:
Cellulosic
Welding current:
DC + DC (for root beads)
Mn 0.7
Ni 0.6
Welding positions:
Mechanical properties: Yield strength Tensile strength ReL / Rp 0.2: Rm: A5: KV: > 460 MPa (N/mm ) 2 550 - 650 MPa (N/mm ) > 20 > 70 > 47 % J (+20C) J (-30C)
2
Redrying temperature:
Not permitted
approximate data
REF. E 156 - A / SP
Date:2005-07-07
A6
Classification:
EN 499: AWS A-5.5: EN ISO 2560-A: EN ISO 2560-B: E 50 3 1NiMo C 21 E 9010-G E 50 3 1NiMo C 21 E 49 10 A
d.o.o.
CELEX Ni Mo
Base materials:
API Spec. 5L: Grade X65, X70, X80. DIN 17172: Grade StE 455.7 (TM), StE 480.7 (TM)
Coating type:
Cellulosic
Welding current:
DC + DC (for root beads)
Ni 0.7
Mo 0.4
Welding positions:
Mechanical properties: Yield strength Tensile strength ReL / Rp 0.2: Rm: A5: KV: > 490 MPa (N/mm ) 620 -720 MPa (N/mm ) > 20 > 70 > 47 % J (+20C) J (-30C)
2 2
Redrying temperature:
Not permitted Elongation Impact energy
approximate data
REF. E 157 - A / SP
Date:2005-07-07
A7
Classification:
EN 499: DIN 1913: AWS A-5.1: EN ISO 2560-A: EN ISO 2560-B: E 35 0 RC 11 E 43 11 R(C) 3 E 6013 E 35 0 RC 11 E 43 13 A
d.o.o.
JADRAN S
Base materials:
Unalloyed steels: Boiler plates: Pipe steels: Shipbilding plates: Steel castings: Thin sheets: DIN: St 33 to St 52.3 HI, HII St 35 to St 35.8 St 45 to St 45.8 St.E 210.7 to St.E 360.7 A, B, D GS-38, GS-45 1623/1 W.Nr.: 1.0035 to 1.0570 1.0345, 1.0425 1.0308 to 1.0305 1.0408 to 1.0405 1.0307 to 1.0582 1.0440, 1.0472, 1.0475 1.0416, 1.0443
Coating type:
Rutile
Welding current:
AC DC -
Mn 0.35
Welding positions:
Mechanical properties: Yield strength Tensile strength ReL / Rp 0.2: Rm: A5: KV: > 360 470 - 550 > 22 > 47 MPa (N/mm ) MPa (N/mm ) % J ( 0C)
2 2
Redrying temperature:
140C / 1 h Elongation Impact energy
approximate data
REF. E 123 - A / SP
Date:2004-06-28
A8
Classification:
EN 499: DIN 1913: AWS A-5.1: EN ISO 2560-A: EN ISO 2560-B: E 38 0 RC 11 E 43 22 R(C) 3 E 6012 E 38 0 RC 11 E 43 12 A
d.o.o.
RUTILEN 12
Base materials:
Unalloyed steels: Boiler plates: Pipe steels: Shipbilding plates: Steel castings: Thin sheets: DIN: St 33 to St 52.3 HI, HII, 17 Mn4 St 35 to St 52.4 StE 210.7 to StE 360.7 A, B, D GS-38 to GS-52 1623/1 W.Nr.: 1.0035 to 1.0570 1.0345, 1.0425, 1.0481 1.0308 to 1.0581 1.0307 to 1.0582 1.0440, 1.0472, 1.0475 1.0416 to 1.0551
Coating type:
Cellulosic-rutile
Welding current:
AC DC -
Mn 0.40
Welding positions:
Mechanical properties: Yield strength Tensile strength ReL / Rp 0.2: Rm: A5: KV: > 360 450 - 550 > 22 > 47 % J (0C) MPa (N/mm2) MPa (N/mm2)
Redrying temperature:
120C / 1 h Elongation Impact energy
approximate data
REF. E 131 - A / SM
Date:2011-12-23
A9
Classification:
EN 499: DIN 1913: AWS A-5.1: EN ISO 2560-A: EN ISO 2560-B: E 42 0 RC11 E 51 22 RR(C) 6 E 6013 E 42 0 RC 11 E 49 13 A
d.o.o.
RUTILEN Z
Base materials:
Unalloyed steels: Boiler plates: Pipe steels: Shipbilding plates: Steel castings: Thin sheets: DIN: St 33 to St 52.3 HI, HII, 17 Mn4 St 35 to St 52.4 StE 210.7 to StE 360.7 A, B, D GS-38 to GS-52 1623/1 W.Nr.: 1.0035 to 1.0570 1.0345, 1.0425, 1.0481 1.0308 to 1.0581 1.0307 to 1.0582 1.0440, 1.0472, 1.0475 1.0416 to 1.0551
Coating type:
Cellulosic-rutile
Welding current:
AC DC - / +
Mn 0.60
Welding positions:
Mechanical properties: Yield strength Tensile strength Rp 0.2 %: Rm: A5: KV : > 420 MPa (N/mm )
2 2
Redrying temperature:
140C / 1 h
2 2.5 3.25 4 5
20 33.9 51.9
approximate data
REF. E 145 - A / SM
Date: 2012-12-23
A10
Classification:
EN 499: DIN 1913: AWS A-5.1: EN ISO 2560-A: EN ISO 2560-B: E 42 0 RC11 E 51 32 RR(C) 5 E 6013 E 42 0 RC 11 E 49 13 A
d.o.o.
RUTILEN 1000 S
Base materials:
Unalloyed steels: Boiler plates: Pipe steels: Shipbilding plates: Steel castings: Thin sheets: DIN: St 33 to St 52.3 HI, HII, 17 Mn4 St 35 to St 52.4 StE 210.7 to StE 360.7 A, B, D GS-38 to GS-52 1623/1 W.Nr.: 1.0035 to 1.0570 1.0345, 1.0425, 1.0481 1.0308 to 1.0581 1.0307 to 1.0582 1.0440, 1.0472, 1.0475 1.0416 to 1.0551
Coating type:
Cellulosic-rutile
Welding current:
AC DC - / +
Mn 0.65
Welding positions:
Mechanical properties: Yield strength Tensile strength ReL / Rp 0.2: Rm: A5: KV: > 420 MPa (N/mm )
2 2
Redrying temperature:
140C / 1 h Elongation Impact energy
approximate data
REF. E 146 - A / SM
Date: 2012-12-23
A11
Classification:
GOST 9467-60: EN 499: DIN 1913: AWS A-5.1: EN ISO 2560-A: EN ISO 2560-B: E 46-T E 35 2 RB 12 E 43 43 RR(B)7 E 6013 E 35 2 RB 12 E 43 03 A
d.o.o.
EMONA
Base materials:
Unalloyed steels: Boiler plates: Pipe steels: Shipbilding plates: Steel castings: Finegrained steels DIN: St 33 to St 52.3 HI, HIII, 17Mn4 St 35 to St 52.4 StE 210.7 to StE 360.7 A, B, D, E GS-38 to GS-52 StE 255 to StE 355 W.Nr.: 1.0035 to 1.0570 1.0345, 1.0435, 1.0481 1.0308 to 1.0581 1.0307 to 1.0582 1.0440 to 1.0476 1.0416 to 1.0551 1.0461 to 1.0562
Coating type:
Basic-rutile
Welding current:
AC DC -
Mn 0.55
Welding positions:
Mechanical properties: Yield strength ReL / Rp 0.2: Rm: A5: KV: > 360 450 - 540 > 24 > 47 MPa (N/mm ) MPa (N/mm ) % J (-20C)
2 2
Redrying temperature:
140C / 1 h
approximate data
REF. E 050 - A / SM
Date:2012-12-23
A12
Classification:
EN 499: DIN 1913: AWS A-5.1: EN ISO 2560-A: EN ISO 2560-B: E 42 0 RR 12 E 51 22 RR 6 E 6013 E 42 0 RR 12 E 49 12 A
d.o.o.
RUTILEN 13
Base materials:
Unalloyed steels: Boiler plates: Pipe steels: Shipbilding plates: Steel castings: Thin sheets: DIN: St 33 to St 52.3 HI, HII, 17 Mn4 St 35 to St 52.4 StE 210.7 to StE 360.7 A, B, D GS-38 to GS-52 1623/1 W.Nr.: 1.0035 to 1.0570 1.0345, 1.0425, 1.0481 1.0308 to 1.0581 1.0307 to 1.0582 1.0440, 1.0472, 1.0475 1.0416 to 1.0551
Coating type:
Rutile
Welding current:
AC DC-
Mn 0.50
Welding positions:
Mechanical properties: Yield strength ReL / Rp 0.2: Rm: A5: KV: > 420 500 640 > 22 > 47 MPa (N/mm ) MPa (N/mm ) % J (0C)
2 2
Redrying temperature:
140C / 2 h
approximate data
REF. E 115 - A / SM
Date:2011-12-23
A13
Classification:
EN 499: DIN 1913: AWS A-5.1: EN ISO 2560-A: EN ISO 2560-B: E 42 0 RR 12 E 51 22 RR 6 E 6013 E 42 0 RR 12 E 49 13 A
d.o.o.
RUTILEN X
Base materials:
Unalloyed steels: Boiler plates: Pipe steels: Shipbilding plates: Steel castings: Thin sheets: DIN: St 33 to St 52.3 HI, HII, 17 Mn4 St 35 to St 52.4 StE 210.7 to StE 360.7 A, B, D GS-38 to GS-52 1623/1 W.Nr.: 1.0035 to 1.0570 1.0345, 1.0425, 1.0481 1.0308 to 1.0581 1.0307 to 1.0582 1.0440, 1.0472, 1.0475 1.0416 to 1.0551
Coating type:
Rutile
Welding current:
AC DC - / +
Mn 0.70
Welding positions:
Mechanical properties: Yield strength Tensile strength ReL / Rp 0.2: Rm: A5: KV : > 420 510 610 > 22 > 47 MPa (N/mm ) MPa (N/mm ) % J (0C)
2 2
Redrying temperature:
140C / 1 h Elongation Impact energy
2 2.5 3.25 4 5
approximate data
REF. E 104 - A / SM
Date:2011-12-23
A14
Classification:
EN 499: DIN 1913: AWS A-5.1: EN ISO 2560-A: EN ISO 2560-B: E 42 0 RR 12 E 51 22 RR 6 E 6013 E 42 0 RR 12 E 49 13 A
d.o.o.
RUTILEN 2000 S
Base materials:
Unalloyed steels: Boiler plates: Pipe steels: Shipbilding plates: Steel castings: Thin sheets: DIN: St 33 to St 52.3 HI, HII, 17 Mn4 St 35 to St 52.4 StE 210.7 to StE 360.7 A, B, D GS-38 to GS-52 1623/1 W.Nr.: 1.0035 to 1.0570 1.0345, 1.0425, 1.0481 1.0308 to 1.0581 1.0307 to 1.0582 1.0440, 1.0472, 1.0475 1.0416 to 1.0551
Coating type:
Rutile
Welding current:
AC DC - / +
Mn 0.70
Welding positions:
Mechanical properties: Yield strength Tensile strength ReL / Rp 0.2: Rm: A5: KV: > 420 510 610 > 22 > 47 MPa (N/mm ) MPa (N/mm ) % J (0C)
2 2
Redrying temperature:
140C / 1 h Elongation Impact energy
approximate data
REF. E 103 - A / SM
Date:2011-12-23
A15
Classification:
EN 499: DIN 1913: AWS A-5.1: EN ISO 2560-A: EN ISO 2560-B: E 38 2 R 12 E 43 33 R 3 E 6013 E 38 2 R 12 E 43 13 A
d.o.o.
RUTILEN K
Base materials:
Unalloyed steels: Boiler plates: Pipe steels: Shipbilding plates: Fine-grain structural steels: DIN: St 33 to St 52.3 HI, HII, 17 Mn4 St 35 to St 52.4 StE 210.7 to StE 360.7 A, B, D, E StE 255 StE 355 W.Nr.: 1.0035 to 1.0570 1.0345, 1.0425, 1.0481 1.0308 to 1.0581 1.0307 to 1.0582 1.0440, 1.0472, 1.0475, 1.0476 1.0461 to 1.0562
Coating type:
Rutile
Welding current:
AC DC+/DC for root passes
Mn 0.50
Welding positions:
Mechanical properties: Yield strength ReL / Rp 0.2: Rm: A5: KV : > 360 470 550 > 22 > 47 MPa (N/mm ) MPa (N/mm ) % J (-20C)
2 2
Redrying temperature:
150C / 2 h
Metal recovery:
cca. 95 %
approximate data
REF. E 055 - A / SM
Date:2011-12-23
A16
Classification:
EN 499: DIN 1913: AWS A-5.1: EN ISO 2560-A: EN ISO 2560-B: E 38 0 R 12 E 43 21 R 3 E 6013 E 38 A R 12 E 43 12 A
d.o.o.
RUTILEN 13 M
Base materials:
Unalloyed steels: Boiler plates: Pipe steels: Shipbilding plates: Steel castings: Thin sheets: DIN: St 33 to St 52.3 HI, HII St 35 to St 52.4 A, B GS-38, GS-45 1623/1 W.Nr.: 1.0035 to 1.0570 1.0345, 1.0425 1.0308 to 1.0581 1.0440, 1.0472 1.0416 to 1.0443
Coating type:
Rutile
Welding current:
AC DC-
Mn 0.50
Welding positions:
Mechanical properties: Yield strength ReL / Rp 0.2: Rm: A5: KV: > 380 470 - 600 > 22 > 60 MPa (N/mm ) MPa (N/mm ) % J ( 0C)
2 2
Redrying temperature:
140C / 2 h
2 2.5 3.25 4 5
approximate data
REF. E 110 - A / M
Date:2011-11-23
A17
Classification:
EN 499: DIN 1913: AWS A-5.1: EN ISO 2560-A: EN ISO 2560-B: E 38 0 RC 11 E 43 22 R(C) 3 E 6013 E 38 0 RC 11 E 43 13 A
d.o.o.
RUTILEN S
Base materials:
Unalloyed steels: Boiler plates: Pipe steels: Shipbuilding plates: Steel castings: Thin sheets: DIN: St 33 to St 52.3 HI, HII, 17 Mn4 St 35 to St 52.4 StE 210.7 to StE 360.7 A, B, D GS-38 to GS-52 1623/1 W.Nr.: 1.0035 to 1.0570 1.0345, 1.0425, 1.0481 1.0308 to 1.0581 1.0307 to 1.0582 1.0440, 1.0472, 1.0475 1.0416 to 1.0551
Coating type:
Cellulosic-rutile
Welding current:
AC DC -/+
Mn 0.60
Welding positions:
Mechanical properties: Yield strength Tensile strength ReL / Rp 0.2: Rm: A5: KV: > 360 470 - 600 > 22 > 47 MPa (N/mm2) MPa (N/mm2) % J (0C)
Redrying temperature:
120C / 1 h Elongation Impact energy
approximate data
REF. E 139 - A / SM
Date:2011-12-23
A18
Classification:
EN 499: DIN 1913: AWS A-5.1: EN ISO 2560-A: EN ISO 2560-B: E 42 0 RC11 E 51 32 R(C) 3 E 6013 E 42 0 RC 11 E 49 13 A
d.o.o.
RUTILEN E
Base materials:
Unalloyed steels: Boiler plates: Pipe steels: Shipbilding plates: Steel castings: Thin sheets: DIN: St 33 to St 52.3 HI, HII, 17 Mn4 St 35 to St 52.4 StE 210.7 to StE 360.7 A, B, D GS-38 to GS-52 1623/1 W.Nr.: 1.0035 to 1.0570 1.0345, 1.0425, 1.0481 1.0308 to 1.0581 1.0307 to 1.0582 1.0440, 1.0472, 1.0475 1.0416 to 1.0551
Coating type:
Cellulosic-rutile
Welding current:
AC DC - / +
Mn 0.6
Welding positions:
Mechanical properties: Yield strength Tensile strength ReL / Rp 0.2: Rm: A5: KV: > 420 510 610 > 22 > 47 MPa (N/mm ) MPa (N/mm ) % J (0C)
2 2
Redrying temperature:
140C / 1 h Elongation Impact energy
approximate data
REF. E142 SI / M
Date: 2.4.2012
A19
d.o.o.
SAVA 130 . B1 SAVA 150 ... B2 SAVA 180 ... B3 SAVA 200 B4 SAVA GV 130 . B5 SAVA GV 160 . B6 SAVA 150 B B7 SAVA 150 AR . B8
Classification:
EN 499: DIN 1913: AWS A-5.1: EN ISO 2560-A: EN ISO 2560-B: E 38 0 RR 33 E 43 32 RR 11 130 E 7024 E 38 0 RR 33 E 43 24 A
d.o.o.
SAVA 130
Base materials:
Unalloyed steels: Boiler plates: Finegrained steels: Shipbilding plates: Steel castings: DIN: St 33 to St 52.3 HI, HII,17Mn4 StE 255 to StE 355 A, B, D GS-38 to GS-52 W.Nr.: 1.0035 to 1.0570 1.0345, 1.0425, 1.0481 1.0461 to 1.0562 1.0440, 1.0472, 1.0475 1.0416 to 1.0551
Coating type:
Rutile
Welding current:
AC DC -
Welding positions:
ReL / Rp 0.2:
Rm: A5: KV :
> 390
MPa(N/mm )
2
Redrying temperature:
250C / 1 h
Metal recovery:
cca.130 %
approximate data
REF. E 190 - A / M
Date: 2010-06-18
B1
Classification:
EN 499: DIN 1913: AWS A-5.1: EN ISO 2560-A: EN ISO 2560-B: E 38 0 RR 53 E 43 32 RR 11 150 E 7024 E 38 0 RR 53 E 43 24 A
d.o.o.
SAVA 150
Base materials:
Unalloyed steels: Boiler plates: Finegrained steels: Shipbilding plates: Steel castings: DIN: St 33 to St 52.3 HI, HII,17Mn4 StE 255 to StE 355 A, B, D GS-38 to GS-52 W.Nr.: 1.0035 to 1.0570 1.0345, 1.0425, 1.0481 1.0461 to 1.0562 1.0440, 1.0472, 1.0475 1.0416 to 1.0551
Coating type:
Rutile
Welding current:
AC DC -
Welding positions:
ReL / Rp 0.2:
Rm: A5: KV :
> 390
MPa(N/mm )
2
Redrying temperature:
250C / 1 h
Metal recovery:
cca.150 %
approximate data
REF. E 170 - A / M
Date: 2010-06-18
B2
Classification:
EN 499: DIN 1913: AWS A-5.1: EN ISO 2560-A: EN ISO 2560-B: E 42 0 RR 74 E 43 32 RR 11 180 E 7024 E 42 0 RR 74 E 49 24 A
d.o.o.
SAVA 180
Base materials:
Unalloyed steels: Boiler plates: Finegrained steels: Shipbilding plates: Steel castings: DIN: St 33 to St 52.3 HI, HII,17Mn4 StE 255 to StE 355 A, B, D GS-38 to GS-52 W.Nr.: 1.0035 to 1.0570 1.0345, 1.0425, 1.0481 1.0461 to 1.0562 1.0440, 1.0472, 1.0475 1.0416 to 1.0551
Coating type:
Rutile
Welding current:
AC DC -
Welding positions:
ReL / Rp 0.2:
Rm: A5: KV :
> 430
MPa(N/mm )
2
Redrying temperature:
250C / 1 h
Metal recovery:
cca. 180 %
110.2
approximate data
REF. E 176 - A / SM
Date: 2011-12-22
B3
Classification:
EN 499: DIN 1913: AWS A-5.1: EN ISO 2560-A: EN ISO 2560-B: E 42 0 RR 74 E 43 32 RR 11 200 E 7024 E 42 0 RR 74 E 49 24 A
d.o.o.
SAVA 200
Base materials:
Unalloyed steels: Boiler plates: Finegrained steels: Shipbilding plates: Steel castings: DIN: St 33 to St 52.3 HI, HII,17Mn4 StE 255 to StE 355 A, B, D GS-38 to GS-52 W.Nr.: 1.0035 to 1.0570 1.0345, 1.0425, 1.0481 1.0461 to 1.0562 1.0440, 1.0472, 1.0475 1.0416 to 1.0551
Coating type:
Rutile
Welding current:
AC DC -
Welding positions:
ReL / Rp 0.2:
Rm: A5: KV :
> 430
MPa(N/mm )
2
Redrying temperature:
250C / 1 h
Metal recovery:
cca. 200 %
approximate data
REF. E 180 - A / SM
Date: 2011-12-23
B4
Classification:
EN 499: DIN 1913: AWS A-5.1: EN ISO 2560-A: EN ISO 2560-B: E 38 0 RR 34 E 43 32 RR 11 130 E 7024 E 38 0 RR 34 E 43 24 A
d.o.o.
SAVA GV 130
Base materials:
Unalloyed steels: Boiler plates: Finegrained steels: Shipbilding plates: Steel castings: DIN: St 33 to St 52.3 HI, HII,17Mn4 StE 255 to StE 355 A, B, D GS-38 to GS-52 W.Nr.: 1.0035 to 1.0570 1.0345, 1.0425, 1.0481 1.0461 to 1.0562 1.0440, 1.0472, 1.0475 1.0416 to 1.0551
Coating type:
Rutile
Welding current:
AC DC -
Welding positions:
ReL / Rp 0.2:
Rm: A5: KV :
> 390
MPa(N/mm )
2
Redrying temperature:
250C / 1 h
Metal recovery:
cca.130 %
5 6
700 700
10 10
20 20
200 285.7
approximate data
REF. E 190GV - A / SM
Date: 2011-12-23
B5
Classification:
EN 499: DIN 1913: AWS A-5.1: EN ISO 2560-A: EN ISO 2560-B: E 38 0 RR 54 E 43 32 RR 11 160 E 7024 E 38 0 RR 54 E 43 24 A
d.o.o.
SAVA GV 160
Base materials:
Unalloyed steels: Boiler plates: Finegrained steels: Shipbilding plates: Steel castings: DIN: St 33 to St 52.3 HI, HII,17Mn4 StE 255 to StE 355 A, B, D GS-38 to GS-52 W.Nr.: 1.0035 to 1.0570 1.0345, 1.0425, 1.0481 1.0461 to 1.0562 1.0440, 1.0472, 1.0475 1.0416 to 1.0551
Coating type:
Rutile
Welding current:
AC DC -
Welding positions:
ReL / Rp 0.2:
Rm: A5: KV :
> 390
MPa(N/mm )
2
Redrying temperature:
250C / 1 h
Metal recovery:
cca.160 %
approximate data
REF. E 195 - A / M
Date: 2010-06-18
B6
Classification:
EN 499: E 42 2 B 53 DIN 1913: E 51 43 B 12 150 AWS A-5.1: E 7028 EN ISO 2560-A: E 42 2 B 53 EN ISO 2560-B: E 49 28 A
d.o.o.
SAVA 150 B
Base materials:
Unalloyed steels: Boiler plates: Finegrained steels: Shipbilding plates: Steel castings: DIN: St 33 to St 70.2 HI, HII,17Mn4, 19Mn5 StE 255 to StE 355 A, B, D, E GS-38, GS-45, GS-52 W.Nr.: 1.0035 to 1.0070 1.0345, 1.0425, 1.0481, 1.0482 1.0461 to 1.0562 1.0440, 1.0472, 1.0475, 1.0476 1.0416, 1.0443, 1.0551
Coating type:
Basic
Welding current:
AC DC +
Welding positions:
ReL / Rp 0.2:
Rm: A5: KV :
> 420
MPa(N/mm )
2
Redrying temperature:
400C / 1 h
Metal recovery:
cca. 150 %
2.5 3.25 4 5 6
27 27 27
approximate data
REF. E 240 - A / SP
Date: 2005-07-07
B7
Classification:
EN 499: DIN 1913: AWS A-5.1: EN ISO 2560-A: EN ISO 2560-B: E42 4 RA 53 E 51 53 AR 11 160 E 7027 E 42 4 RA 53 E 49 27 A
d.o.o.
SAVA 150 AR
Base materials:
Unalloyed steels: Boiler plates: High tensile steels: Shipbuilding plates: Steel castings: DIN: St 33 do St 52.3 HI, HII,17Mn4 StE255 StE355 WStE 255 WStE 355 A, B, D, E, AH 32 EH36 GS-38, GS-52 W.Nr.: 1.0035 to 1.0561 1.0345, 1.0425 1.0440, 1.0472, 1.0475 1.0416
Coating type:
Rutile-acid
Welding current:
AC DC - / +
Welding positions:
ReL / Rp 0.2:
Rm: A5: KV :
> 420
MPa(N/mm )
2
500 - 650 MPa(N/mm ) > 22 > 85 > 75 > 47 % J ( +20C) J ( -20 C) J ( -40 C)
Redrying temperature:
100-110C / 1 h
Metal recovery:
cca. 150 %
65 94 147 205
approximate data
REF. E 173 - A / M
Date:2004-06-28
B8
Notes:
d.o.o.
EVB 50 .. C1 EVB 55 ... C2 EVB EXTRA .. C3 EVB 45 .. C4 EVB 47 .. C5 EVB S . C6 GALEB 50 . C7 EVB K C8
Classification:
EN 499: DIN 1913: AWS A-5.1: EN ISO 2560-A: EN ISO 2560-B: E 42 4 B 32 H 5 E 51 55 B 10 E 7018- 1H4R E 42 4 B 32 H5 E 49 18 A
d.o.o.
EVB 50
Base materials:
Unalloyed steel Fine grained steel Boiler plate Pipe steel Shipbulding plate Cast iron SIST EN S185 - E335 S235N - S355N P255NH - P355NH S420ML P235GH, P265GH P295GH, P355GH P235G1TH - P355T2 L210 - L360GA L240NB - L415NB S235JRS2-S235J4S S310G1S S355G2S GE200 GE260 DIN St 33 - St 60.2 St E 255 - St E 355 W St E 255 - W St E 355 TStE 420 TM H I, H II, 17Mn4, 19Mn5 St 35 - St 52.4 St E 210.7 StE290.7 StE415.7 GL-A, do GL-E GL-A32 do GL-D36 GS-38 do GS-52 W.Nr. 1.0035, 1.0060 1.0461, 1.0545 1.0462, 1.0565 1.8836 1.0345, 1.0425 1.0481, 1.0473 1.0308, 1.0581 1.0307, 1.0499 1.0484, 1.8972 1.0441, 1.0476 1.0513, 1.0585 1.0420, 1.0552
Coating type:
Basic
Welding current:
DC + AC (OCV>70 V)
Welding positions:
Mechanical properties: Yield strength Tensile strength ReL / Rp 0.2: Rm: A5: KV : > 440 510 610 > 24 MPa (N/mm ) MPa (N/mm ) %
2 2
Redrying temperature:
400C / 1 h
2 2.5/350 3.25/450 4 5 6 8
C1
Classification:
EN 499 : DIN 8529 : AWS/ASME 5.1: EN ISO 2560-A: EN ISO 2560-B: E 42 6B 42 H5 EY 42 76 MnB E 7018-1 E 42 6B 42 H5 E 49 18-P1 A
d.o.o.
EVB 55
Base materials:
Unalloyed steel Fine grained steel Boiler plate Pipe steel Shipbulding plate Cast iron SIST EN S185 - E360 S235N - S355N P255NH - P355NH S420ML P235GH, P265GH P295GH, P355GH P235G1TH - P355T2 L240NB - L415NB S235JRS2-S235J4S S310G1S S355G2S GE200 GE260 2 Do 685 Mpa (N/mm ) DIN St 33 - St 70.2 St E 255 - St E 355 W St E 255 - W St E 355 TStE 420 TM H I, H II, 17Mn4, 19Mn5 St 35 - St 52.4 StE290.7 StE415.7 GL-A, do GL-E GL-A32 do GL-D36 GS-38 do GS-52 W.Nr. 1.0035, 1.0070 1.0461, 1.0545 1.0462, 1.0565 1.8836 1.0345, 1.0425 1.0481, 1.0473 1.0308, 1.0581 1.0484, 1.8972 1.0441, 1.0476 1.0513, 1.0585 1.0420, 1.0552
Coating type:
Basic
Welding current:
DC + AC (OCV > 70V)
Welding positions:
Yield strength
2
ReL / Rp 0.2: > 420 MPa (N/mm ) > 420 MPa (N/mm ) 500 610 MPa (N/mm ) > 500 MPa (N/mm ) > 25 % > 25 %
2
Redrying temperature:
300 - 350C/ 2 h or 400C/1h Impact energy KV :
approximate data
REF. E 225 - A / SM
Date:2011-12-23
C2
Classification:
EN 499: DIN 8529: AWS A-5.1: EN ISO 2560-A: EN ISO 2560-B: E 42 6 B 12 H10 EY 42 53 MnB E 7016 E 42 6 B 12 H10 E 4916-P1 A
d.o.o.
EVB EXTRA
Base materials:
Unalloyed steel Fine grained steel Boiler plate Pipe steel Shipbulding plate Cast iron Rail steel SIST EN S185 - E360 S235N - S355N P255NH - P355NH S420ML P235GH, P265GH P295GH, P355GH P235G1TH - P355T2 L240NB - L415NB S235JRS2-S235J4S S310G1S S355G2S GE200 GE260 2 Do 685 Mpa (N/mm ) DIN St 33 - St 70.2 St E 255 - St E 355 W St E 255 - W St E 355 TStE 420 TM H I, H II, 17Mn4, 19Mn5 St 35 - St 52.4 StE290.7 StE415.7 GL-A, do GL-E GL-A32 do GL-D36 GS-38 do GS-52 W.Nr. 1.0035, 1.0070 1.0461, 1.0545 1.0462, 1.0565 1.8836 1.0345, 1.0425 1.0481, 1.0473 1.0308, 1.0581 1.0484, 1.8972 1.0441, 1.0476 1.0513, 1.0585 1.0420, 1.0552
Coating type:
Basic
Welding current:
AC DC +
Welding positions:
Mechanical properties: Yield strength Tensile strength Elongation ReL / Rp 0.2: Rm: A5: KV : > 420 500-640 > 22 > 47 MPa (N/mm ) MPa (N/mm ) % J (-60C)
2 2
Redrying temperature:
300C / 2 h
Impact energy
approximate data
REF. E 227 - A / SM
Date:2010-08-30
C3
Classification:
EN 499: DIN 1913: AWS A-5.1: EN ISO 2560-A: EN ISO 2560-B: E 42 2 B 32 H5 E 51 43 B(R)9 E 7016 E 42 2 B 32 H5 E 49 18-P1 A
d.o.o.
EVB 45
Base materials:
Unalloyed steel: Fine grained steel Boiler plate Pipe steel Shipbulding plate Cast iron SIST EN S185 - E335 S235N - S355N P255NH - P355NH S420ML P235GH, P265GH P295GH, P355GH P235G1TH - P355T2 L210 - L360GA L240NB - L415NB S235JRS2-S235J4S S310G1S S355G2S GE200 GE260 DIN St 33 - St 60.2 St E 255 - St E 355 W St E 255 - W St E 355 TStE 420 TM H I, H II, 17Mn4, 19Mn5 St 35 - St 52.4 St E 210.7 StE290.7 StE415.7 GL-A, do GL-E GL-A32 do GL-D36 GS-38 do GS-52 W.Nr. 1.0035, 1.0060 1.0461, 1.0545 1.0462, 1.0565 1.8836 1.0345, 1.0425 1.0481, 1.0473 1.0308, 1.0581 1.0307, 1.0499 1.0484, 1.8972 1.0441, 1.0476 1.0513, 1.0585 1.0420, 1.0552
Coating type:
Basic
Welding current:
DC + AC (OCV>70V)
Welding positions:
Mechanical properties: Yield strength Tensile strength ReL / Rp 0.2: Rm: A5: KV : > 410 510 610 > 24 > 47 MPa (N/mm ) MPa (N/mm ) % J (-20C)
2 2
Redrying temperature:
400C / 1 h
approximate data
REF. E 235 - A / SP
Date:2005-07-14
C4
Classification:
EN 499: DIN 1913: AWS A-5.1: EN ISO 2560-A: EN ISO 2560-B: E 38 2 B 32 H5 E 43 55 B 10 E 6018 E 38 2 B 32 H5 E 43 18 A
d.o.o.
EVB 47
Base materials:
Unalloyed steel Fine grained steel Boiler plate Pipe steel Shipbulding steel Cast iron SIST EN S185 - E335 S235N - S355N P255NH - P355NH S420ML P235GH, P265GH P295GH, P355GH P235G1TH - P355T2 L210 - L360GA L240NB - L415NB S235JRS2-S235J4S S310G1S S355G2S GE200 GE260 DIN St 33 - St 60.2 St E 255 - St E 355 W St E 255 - W St E 355 TStE 420 TM H I, H II, 17Mn4, 19Mn5 St 35 - St 52.4 St E 210.7 StE290.7 StE415.7 GL-A, do GL-E GL-A32 do GL-D36 GS-38 do GS-52 W.Nr. 1.0035, 1.0060 1.0461, 1.0545 1.0462, 1.0565 1.8836 1.0345, 1.0425 1.0481, 1.0473 1.0308, 1.0581 1.0307, 1.0499 1.0484, 1.8972 1.0441, 1.0476 1.0513, 1.0585 1.0420, 1.0552
Coating type:
Basic
Welding current:
DC + AC (OCV>70 V)
Welding positions:
Mechanical properties: Yield strength Tensile strength ReL / Rp 0.2: Rm: A5: KV : > 420 470 530 > 24 > 47 MPa (N/mm ) MPa (N/mm ) % J (-20C)
2 2
Redrying temperature:
400C / 1 h
approximate data
REF. E 230 - A / SM
Date:2011-12-23
C5
Classification:
EN 499: DIN 1913: AWS A-5.1 EN ISO 2560-A: EN ISO 2560-B: E 42 4 B 12 H10 E 51 43 B(R)10 E 7016 E 42 4 B 12 H10 E 49 16 A
d.o.o.
EVB S
Base materials:
Unalloyed steel Fine grained steel Boiler plate Pipe steel Shipbulding plate Cast iron SIST EN S185 - E335 S235N - S355N P255NH - P355NH S420ML P235GH, P265GH P295GH, P355GH P235G1TH - P355T2 L210 - L360GA L240NB - L415NB S235JRS2-S235J4S S310G1S S355G2S GE200 GE260 DIN St 33 - St 60.2 St E 255 - St E 355 W St E 255 - W St E 355 TStE 420 TM H I, H II, 17Mn4, 19Mn5 St 35 - St 52.4 St E 210.7 StE290.7 StE415.7 GL-A, do GL-E GL-A32 do GL-D36 GS-38 do GS-52 W.Nr. 1.0035, 1.0060 1.0461, 1.0545 1.0462, 1.0565 1.8836 1.0345, 1.0425 1.0481, 1.0473 1.0308, 1.0581 1.0307, 1.0499 1.0484, 1.8972 1.0441, 1.0476 1.0513, 1.0585 1.0420, 1.0552
Coating type:
Rutile-basic
Welding current:
DC + AC
Welding positions:
Mechanical properties: Yield strength Tensile strength ReL / Rp 0.2: Rm: A5: KV : > 420 500 640 > 22 > 47 MPa (N/mm ) MPa (N/mm ) % J (-40C)
2 2
Redrying temperature:
380C / 1 h
approximate data
REF. E 215 - A / SM
Date2010-02-16
C6
Classification:
EN 499: DIN 1913: AWS A-5.1 EN ISO 2560-A: EN ISO 2560-B: E 42 2 B 32 E 51 54 B(R)10 E 7016 E 42 2 B 32 H5 E 49 16 A
d.o.o.
GALEB 50
Base materials:
Unalloyed steel Fine grained steel Boiler plate Pipe steel Shipbulding plate Cast iron SIST EN S185 - E335 S235N - S355N P255NH - P355NH S420ML P235GH, P265GH P295GH, P355GH P235G1TH - P355T2 L210 - L360GA L240NB - L415NB S235JRS2-S235J4S S310G1S S355G2S GE200 GE260 DIN St 33 - St 60.2 St E 255 - St E 355 W St E 255 - W St E 355 TStE 420 TM H I, H II, 17Mn4, 19Mn5 St 35 - St 52.4 St E 210.7 StE290.7 StE415.7 GL-A, do GL-E GL-A32 do GL-D36 GS-38 do GS-52 W.Nr. 1.0035, 1.0060 1.0461, 1.0545 1.0462, 1.0565 1.8836 1.0345, 1.0425 1.0481, 1.0473 1.0308, 1.0581 1.0307, 1.0499 1.0484, 1.8972 1.0441, 1.0476 1.0513, 1.0585 1.0420, 1.0552
Coating type:
Basic
Welding current:
DC + AC (OCV>70 V)
Welding positions:
Mechanical properties: Yield strength Tensile strength ReL / Rp 0.2: Rm: A5: KV : > 410 510 570 > 24 MPa (N/mm ) MPa (N/mm ) % J (-20C) J (-40C)
2 2
Redrying temperature:
400C / 1 h
approximate data
REF. E 210 - A / SM
Date:2010-01-16
C7
Classification:
EN 499: DIN 1913: AWS A-5.1: EN ISO 2560-A: EN ISO 2560-B: E 42 2 B 12 H5 E 51 43 B(R) 10 E 7016 E 42 2 B 12 H5 E 49 16-P1 A
d.o.o.
EVB K
Base materials:
Unalloyed steel Fine grained steel Boiler plate Pipe steel Shipbulding plate Cast iron SIST EN S185 - E360 S235N - S355N S420ML P235GH, P265GH P295GH, P355GH P235G1TH - P355T2 L240NB - L415NB (X 42 do X 60) S235JRS2-S235J4S S310G1S S355G2S GE200 GE260 DIN St 33 - St 70.2 St E 255 - St E 355 TStE 420 TM H I, H II, 17Mn4, 19Mn5 St 35 - St 52.4 StE290.7 StE415.7 GL-A, do GL-E GL-A32 do GL-D36 GS-38 do GS-52 W.Nr. 1.0035, 1.0070 1.0461, 1.0545 1.8836 1.0345, 1.0425 1.0481, 1.0473 1.0308, 1.0581 1.0484, 1.8972 1.0441, 1.0476 1.0513, 1.0585 1.0420, 1.0552
Coating type:
basic
Welding current:
DC + DC (for only root pass) AC (OCV > 70V)
Mn 1.3
Welding positions:
Redrying temperature:
400 C / 1 h
> 47 J (-20C) > 47 J (-40C) Hydrogen content: < 5 ml / 100 g weld metal Impact energy
approximate data
REF. E 220 - A / SP
Date:2005-01-14
C8
Notes:
EVB 60 . D1 EVB 65 . D2 EVB Ni .. D3 EVB CuNi D4 EVB CuNiCr . D5 EVB NiMo D6 GALEB 70 D7 EVB 2.5 Ni ... D8 EVB 2.5 NiMo . D9 EVB 62.D10 EVB 75 . D11 EVB CrNiMo ......................... D12 EVB 80 . D13 EVB 100 .. D14 EVB 100 EKSTRA . D15 EVB SP2 D16
Classification:
EN 499: DIN 8529: AWS A-5.5: EN ISO 2560-A: EN ISO 2560-B: E 50 4 Mo B 42 EY 50 75 Mn1 MoB E 8018-G E 50 4 MoB 42 H5 E 57 18-3M2A
d.o.o.
EVB 60
Base materials:
DIN: St 44.2 to St 70.2 StE 255 to StE 500 WStE 255 to WStE 500 Boiler plates: HI, HII, 17 Mn4, 19Mn5 Ageing resistant steels: ASt 41, ASt 45, ASt 52 Pipe steels: St 35 to St 52.4 Shipbilding plates: A to E, AH 32 to EH 36 Steel castings: GS-38 to GS-60 Unalloyed steels: Finegrained steels: W.Nr.: 1.0035 to 1.0070 1.0461 to 1.8907 1.0462 to 1.8937 1.0345, 1.0425, 1.0481, 1.0482 1.0426, 1.0436, 1.0577 1.0308 to 1.0581 1.0440 to 1.0476 1.0416 to 1.0553
Coating type:
Basic
Welding current:
DC +
Welding positions:
Mechanical properties: Yield strength Tensile strength ReL / Rp 0.2: Rm: A5: KV : > 520 MPa (N/mm ) 620 720 > 22 > 47 % J (-40C) MPa (N/mm )
2 2
Redrying temperature:
400C / 1 h
2.5 3.25 4 5 6
approximate data
REF. E 350 - A / SM
Date:2011-12-23
D1
Classification:
EN 499 DIN 8529: AWS A-5.5: EN ISO 18275-A: E 55 6 Mn 1 Ni Mo B 42H5 EY 55 76 Mn 1 NiMo B H5 E 9018-G E 55 6 Mn 1 NiMo B42H5
d.o.o.
EVB 65
Base materials:
Unalloyed steels: StE355 StE500, WStE 355 WStE500, EStE 355 EStE 500 High tensile steels: TStE 500 Creep resistant steels: 17 MnMoV64 , 15NiCuMoNb5, 11NiMoV 53, 20 MnMoNi 45
Coating type:
basic
Welding current:
DC + AC (OCV > 70V)
Welding positions:
Mechanical properties: Yield strength ReL / Rp 0.2: Rm: A5: KV : > 560 630 - 780 >20 % 150 J ( +20 C) 55J ( - 60 C) MPa (N/mm ) MPa (N/mm )
2 2
Redrying temperature:
300-350C / 2 h or 400C / 2 h
approximate data
REF. E 430 - A / MS
Date:2011-12-16
D2
Classification:
EN 499: DIN 8529: AWS A-5.5: E 50 6 1 Ni B 42 H5 EY 50 75 Mn1 NiB E 8018-G E 7018-G AWS A-5.5: E 8018-C3 EN ISO 2560-A: E 50 6 1Ni B 42 H5 EN ISO 2560-B: E 55 16-3N3 A
d.o.o.
EVB Ni
Base materials:
DIN: St 52.3 to St 70.2 StE 380 to StE 460 WStE 380 to WStE 460 Finegr.microalloy.steels TStE 380 to TStE 460 Ni alloyed steels 13MnNi63, 15MnNi63 Boiler plates: 17Mn4, 19Mn5 Steel castings: GS-52, GS-60 Weather corr.resist.steel: CORTEN, Patinax Unalloyed steels: Finegrained steels: W.Nr.: 1.0570 to 1.0070 1.8900 to 1.8905 1.8930 to 1.8935 1.8910 to 1.8915 1.6217, 1.6210 1.0481 1.0482 1.0551, 1.0553
Coating type:
Basic
Welding current:
DC +
Welding positions:
Mechanical properties: Yield strength Tensile strength ReL / Rp 0.2:: Rm: A5: KV : > 500
Redrying temperature:
400C / 1 h
2.5 3.25 4 5 6
approximate data
REF. E 360 - A / M
Date:2011-02-15
D3
Classification:
EN 499 DIN 8529: AWS A-5.5: EN ISO 2560-A: EN ISO 2560-B: E 46 4 ZB 42 H5 EY 50 75 CuNi B E 7018-G E 46 4 ZB 42 H5 E 49 16-NC A
d.o.o.
EVB CuNi
Base materials:
DIN: Weather corr.resist.steel: WTSt 37, WTSt 52 CORTEN A, B, C, Patinax 37 RBH 35 Acor 37, Acor 50 HSB 51, HSB 55 C W.Nr.: 1.8962, 1.8963, 1.8965 1.8960
Coating type:
Basic
Welding current:
DC +
Welding positions:
Mechanical properties: Yield strength Tensile strength ReL / Rp 0.2: Rm: A5: KV : > 460 540 620 > 20 MPa (N/mm ) MPa (N/mm ) % J (-20C) J (-40C)
2 2
Redrying temperature:
400C / 1 h
2.5 3.25 4 5
approximate data
REF. E 370 - A / SM
Date:2011-12-07
D4
Classification:
EN 499: AWS A-5.5: AWS A-5.5: SN 05 5010: EN ISO 2560-A: EN ISO 2560-B: E 46 4 Z B 42 H5 E 8018-W2 E 7018-G E NiCrCu-14B E 46 4 Z B 42 H5 E 49 16-NCC1A
d.o.o.
EVB CuNiCr
Base materials:
Weather corr.resist.steel Corten steel: Atmofix steel
W.Nr.: 1.8963
Coating type:
Basic
Welding current:
DC +
Welding positions:
Mechanical properties: Yield strength Tensile strength ReL / Rp 0.2: Rm: A5: KV : > 460 530 700 > 22 > 47 MPa (N/mm ) MPa (N/mm ) % J (-40C)
2 2
Redrying temperature:
400C / 1 h
2.5 3.25 4 5
approximate data
REF. E 375 - A / SP
Date:2005-07-08
D5
Classification:
EN 499: DIN 8529: AWS A-5.5: EN ISO 2560-A: EN ISO 2560-B: E 50 41 NiMo B 42 H5 EY 50 76 1 NiMo B E 8018-G E 50 41 NiMo B 42H5 E 57 18-N2M3 A
d.o.o.
EVB NiMo
Base materials:
Unalloyed steels: Finegrained steels: DIN: St 52.3 to St 70.2 StE 460, StE 460 WStE 460, WStE 500 TStE 460, TStE 500 NAXTRA 56, NAXTRA 63 W.Nr.: 1.0570 to 1.0070 1.8905, 1.8907 1.8935, 1.8937 1.8915, 1.8917 1.7279
Coating type:
Basic
Welding current:
DC +
Welding positions:
Mechanical properties: Yield strength Tensile strength ReL / Rp 0.2:: Rm: A5: KV : > 510 580 710 > 22 MPa (N/mm ) MPa (N/mm ) % J (-20C) J (-40C)
2 2
Redrying temperature:
400C / 1 h
2.5 3.25 4 5
approximate data
REF. E 395 - A / SM
Date:2010-02-16
D6
Classification:
EN 499: DIN 8529: AWS A-5.5: EN ISO 2560-A: EN ISO 2560-B: E 50 2 Mn1Ni B 42 H5 EY 50 75 1 NiMo B E 9016-G E 50 2 Mn1Ni B 42 H5 E 57 16-N2M3 A
d.o.o.
GALEB 70
2
Mn, Ni and Mo alloyed basic electrode for welding low alloyed steels with tensile strength up to 735 N/mm 2 and finegrained steels with yield strength up to 500 N/mm . Preheating and interpass temperature, as well as postweld heat treatment as required by the base metal.
Base materials:
DIN: St 50.2, St 60.2, St 70.2 StE 380, StE 500 WStE 380, WStE 500 Heat resistant steels: WB 35, WB 36, BHW 35, BHW 38 Steel castings: GS-60, GS-70 Rail steels: Rm to 880 N/mm2 Medium alloyed steels: Ni-Cr-Mo- base Unalloyed steels: Finegrained steels: W.Nr.: 1.0050, 1.0060, 1.0070 1.8900, 1.8907 1.8930, 1.8937 1.8817, 1.6368 1.0553, 1.0554
Coating type:
Basic
Welding current:
DC +
Welding positions:
Mechanical properties: Yield strength Tensile strength ReL / Rp 0.2: Rm: A5: KV : > 520 640 710 > 22 MPa (N/mm ) MPa (N/mm ) % J (+20C) J (-20C)
2 2
Redrying temperature:
400C / 1 h
approximate data
REF. E 380 - A / SP
Date:2005-07-14
D7
Classification:
EN 499: DIN 8529: AWS A-5.5: EN ISO 2560-A: EN ISO 2560-B: E 50 6 2Ni B 42 H 10 EY 50 76 2 Ni B E 8018-C1 E 50 8 2 Ni B 42 H5 E 57 18-3N3 A
d.o.o.
EVB 2.5 Ni
2
Ni alloyed basic electrode for welding low alloyed steels with tensile strength up to 735 N/mm and 2 finegrained steels with yield strength up to 550 N/mm . Guaranteed mechanical properties at law temperatures.
Base materials:
DIN: Finegrained steels: EStE 380 to EStE 500 Finegr.microalloy steels Quenched and tempered steels: NAXTRA 56 Low temperature steels: TTSt35N to TTSt45V 14Ni6 to 16Ni14 W.Nr.: 1.8911 to 1.8919 1.7279 1.5622 to 1.5639
Coating type:
Basic
Welding current:
DC +
Welding positions:
Mechanical properties: Yield strength Tensile strength ReL / Rp 0.2: Rm: A5: KV : > 510 MPa (N/mm ) 590 670 > 22 % Mpa (N/mm )
2 2
Redrying temperature:
400C / 1 h
> 47 J (-20C) > 47 J (-80C) Hydrogen content: < 5 ml / 100 g weld metal
2.5 3.25 4 5
approximate data
REF. E 390 - A / MS
Date:2011-02-15
D8
Classification:
EN 757: DIN 8529: AWS A-5.5: ISO 18275-A: EN ISO 2560-B: E 55 6 2NiMo B 42 H5 EY 50 75 2 Ni Mo B E 9018-G E 55 6 2 Ni Mo B 42 H5 E 62 18 N4M2A H5
d.o.o.
Ni and Mo alloyed basic electrode for welding Ni-Mo alloyed steels with tensile strength up to 785 N/mm , finegrained steels with guaranteed mechanical properties at law temperatures and Q&T finegrained steels with 2 yield strength up to 590 N/mm
Base materials:
Quenched and tempered finegrained steels: Boiler plates: Steel castings: Rail steels (Rm to 880 N/mm2) DIN: NAXTRA 56 NAXTRA 63 HY 80 17MnMoV64 22NiMoCr37 GS-60, GS-70 W.Nr.: 1.7279 1.7279 1.6780 1.5403, 1.8817 1.6751 1.0553, 1.0554
Coating type:
Basic
Welding current:
DC +
Welding positions:
Mechanical properties: Yield strength Tensile strength ReL / Rp 0.2: Rm: A5: > 590 650 780 > 20 MPa (N/mm ) MPa (N/mm ) % J (-20C) J (-60C)
2 2
Redrying temperature:
400C / 1 h
2.5 3.25 4 5
approximate data
REF. E 403 - A / SP
Date2005-07-14
D9
Classification:
EN 757: AWS A-5.5: EN ISO 18275-A: EN ISO 18275-B: E 62 4 MnMoB42 H5 E 10018-G E 62 4 MnMoB42 H5 E 62 18 4M2 H5
d.o.o.
EVB 62
Coating type:
Basic
Welding current:
DC +
Welding positions:
Mechanical properties: Yield strength Tensile strength ReL / Rp 0.2: Rm: A5: KV : > 620 690 890 > 18 > 47 % MPa (N/mm ) MPa (N/mm ) typ >20%
2 2
Redrying temperature:
400C / 1 h
2.5 3.25 4
approximate data
REF. E 355 / MS
Date:2012-01-10
D 10
Classification:
EN 757: DIN 8529: AWS A-5.5: ISO 18275-A: ISO 18275-B: E 69 6 Mn2NiCrMo B 42 H5 EY 69 75 Mn2NiCrMo E 10018-G E 69 6 Mn2NiCrMo B 42 H5 E 78 16-N5CM3 A H5
d.o.o.
EVB 75
Base materials:
Quenched and tempered finegrained steels: DIN: NAXTRA 65 NAXTRA 70 HSB 77Y T 1A T 1B W.Nr.: 1.7279 1.8851, 1.8921 1.8852, 1.8922
Coating type:
Basic
Welding current:
DC +
Welding positions:
Mechanical properties: Yield strength Tensile strength ReL / Rp 0.2: Rm: A5: KV : > 690 780 940 > 17 > 47 (69) MPa (N/mm ) MPa (N/mm ) % J (-60C)
2 2
Redrying temperature:
400C / 1 h
2.5 3.25 4 5 6 8
approximate data
REF. E 451 - A / M
Date:2011-02-15
D11
Classification:
DIN 8529: AWS A-5.5: ISO 18275-A: EY 62 52 1NiCrMo B E 11018-G E 62 2Z-B 42 H5
d.o.o.
EVB CrNiMo
Base materials:
Finegrained steels: DIN: WSt 52.3 CN: 15222 W.Nr.: 1.8963
Coating type:
Basic
Welding current:
DC +
Welding positions:
Mechanical properties: Yield strength Tensile strength ReL / Rp 0.2: Rm: A5: KV : > 620 700 800 > 18 MPa (N/mm ) MPa (N/mm ) % J (+20C) J (-20C)
2 2
Redrying temperature:
400C / 1 h
2.5 3.25 4 5 6
approximate data
REF. E 305 - A / SP
Date:2005-07-14
D12
Classification:
EN 757: DIN 8529: AWS A-5.5: ISO 18275-A: ISO 18275-B: E 69 6 Mn2NiCrMo B 42 H5 EY 69 75 Mn2NiCrMo B E 10018-G E 69 6Mn2NiCrMo B 42 H5 E 78 16 N5CM3 A H5
d.o.o.
EVB 80
Base materials:
Quenched and tempered finegrained steels: DIN: NAXTRA 70 NAXTRA 75 HSB 77Y, HSY 100 T 1A T 1B W.Nr.: 1.7279 1.8851, 1.8921 1.8852, 1.8922
Coating type:
Basic
Welding current:
DC +
Welding positions:
Mechanical properties: Yield strength Tensile strength ReL / Rp 0.2: Rm: A5: KV : > 700 810 960 > 16 MPa (N/mm ) MPa (N/mm ) % J (-20C) J (-60C)
2 2
Redrying temperature:
400C / 1 h
2.5 3.25 4 5 6
approximate data
REF. E 461 - A / SM
Date:2011-12-08
D13
Classification:
EN 757: DIN 8529: AWS A-5.5: ISO 18275-A: ISO 18275-B: E 79 4 Mn2Ni1CrMo B 42 EY 79 64 Mn2Ni1CrMoB E 12018-G E 79 4 Mn2Ni1CrMo B42 H5 E 8316 N5CM3 H5
d.o.o.
EVB 100
Base materials:
DIN: Quenched and tempered Wear resistant steels: Wear resistant steels XABO 90 W.Nr.: 1.8925
Coating type:
Basic
Welding current:
DC +
Welding positions:
Mechanical properties: Yield strength Tensile strength ReL / Rp 0.2: Rm: A5: > 790 980 1080 > 14 MPa (N/mm ) MPa (N/mm ) % J (+20C) J (-40C)
2 2
Redrying temperature:
400C / 1 h
2.5 3.25 4 5 6
approximate data
REF. E 471 - A / SM
Date:2011-12-16
D14
Classification:
DIN 8529: AWS A-5.5: ISO 18275-A: ISO 18275-B: Y8975 Mn2Ni1CrMo B H5 E 12018 - G E 89 4 ZB62 H5 E 8316 N5CM3 H5
d.o.o.
Base materials:
Heat-treated fine grained structural steels up to a yield strength of 960N/mm2 S 960 QL / TStE 960V
Coating type:
basic
Welding current:
AC(OCV>70V) DC +
Welding positions:
Mechanical properties: Yield strength ReL / Rp 0.2: Rm: A5: KV : > 960 > 1050 > 15 > 60 > 40 MPa (N/mm ) MPA (N/mm ) % J ( +20 C) J ( - 40 C)
2 2
Redrying temperature:
300-350C/ 2h
Approvals:
approximate data
REF. E 472 - A / SP
Date:2005-07-14
D15
Classification:
EN 757: ISO 18275-A: ISO 18275-B: E 62 4 ZB 34 E 62 4 Z B34 E 69 18 GA
d.o.o.
EVB SP2
Base materials:
Coating type:
Basic
Welding current:
DC + AC (OCV>70 V)
Welding positions:
Mechanical properties: Yield strength Tensile strength ReL / Rp 0.2: Rm: A5: KV : > 620 690-890 > 18 > 47 MPa (N/mm ) MPa (N/mm ) % J (-40C)
2 2
Redrying temperature:
400C / 1 h
approximate data
REF. E 308 A /M
Date:2003-05-12
D16
Notes:
EVB Mo . E1 EVB MoV E2 EVB CrMo . E3 EVB 2 CrMo .. E4 EVB P 24 .. E5 EVB 5 CrMo .. E6 EVB 9 CrMo .. E7 EVB CrMoV E8 EVB 3 CrMoV . E9 EVB 9 CrMoV . E10 EVB 91 CrMoV ... E11 EVB 911W.E12 EVB Mo1Cr . E13
Classification:
EN 1599: EN 499: DIN 8575: AWS A-5.5: EN ISO 2560-A: EN ISO 2560-B: EN ISO 3580-A: EN ISO 3580-B: E Mo B 42 E 46 4 MoB 42 H5 E Mo B 26 E 7018-A1H4 E 46 4Mo B 42 H5 E 49 18-3M3 A E Mo B 42 H5 E 49 18-1M3
d.o.o.
EVB Mo
Base materials:
Unalloyed steels: Finegrained steels: Boiler plates: Pipe steels: Steel castings: DIN: St 37.2 to St 52.3 WStE 380 to WStE 460 H I, H II, H III 17 Mn4, 19 Mn5, 15 Mo3 St 35.8, St 45.8 15 Mo3 GS-22 Mo4 W.Nr.: 1.0037 to 1.0570 1.8930 to 1.8935 1.0345, 1.0425, 1.0435 1.0481, 1.0482, 1.5415 1.0305, 1.0405 1.5415 1.5419
Coating type:
Basic
Welding current:
DC +
Welding positions:
ReL / Rp 0.2:
Rm: A5:
> 460
MPa(N/mm )
2
Redrying temperature:
400C / 1 h
KV : > 47 J (-20C) > 47 J (-40C) Hydrogen content: < 4 ml / 100 g weld metal
2.5 3.25 4 5 6
approximate data
REF. E 250 - A / SM
Date:2011-12-16
E1
Classification:
EN 1599: DIN 8575: AWS A-5.5: EN ISO 3580-A: EN ISO 3580-B: E MoV B 42 E MoV B 20+ E 8018-G E MoV B 42 H5 E 62 18-G H5
d.o.o.
EVB MoV
Base materials:
Boiler plates: Steel castings: DIN: 14 MoV63, 21 MoV53, 17 MoV84, 24 CrMoV 55 10CrSiMoV7 GS-17 CrMoV 5.11 W.Nr.: 1.7715, 1.5404, 1.5406, 1.7733 1.8075 1.7706
Heat treatment:
Stress relieved: 700 C / 1 h and then cooled on the air.
Coating type:
Basic
Welding current:
DC +
Welding positions:
ReL / Rp 0.2:
Rm: A5: KV :
Redrying temperature:
400C / 1 h
2.5 3.25 4 5 6
approximate data
REF. E 270 - A / SM
Date:2011-12-23
E2
Classification:
EN 1599: DIN 8575: AWS A-5.5: EN ISO 3580-A: EN ISO 3580-B: E CrMo1 B 42 E CrMo1 B 20+ E 8018-B2 E CrMo1 B 42 H5 E 55 18-1CM H5
d.o.o.
EVB CrMo
Base materials:
DIN: 13CrMo44, 15CrMo3 13CrMoV42 (HIV) Steel for the cementation: 15Cr3, 16MnCr5 20MnCr5, 15CrMo5 Quenched and tempered steel: 25CrMo4 Steel castings: GS-22CrMo5, GS-22CrMo54 Boiler plates and tubes: W.Nr.: 1.7335, 1.7015, 1.7131 1.7147, 1.7262 1.7218 1.7354
Heat treatment:
Stress relieved: 680 C / 2 h, oven-cooling down to 300 C and then cooled on the air.
Coating type:
Basic
Welding current:
DC +
Welding positions:
ReL / Rp 0.2:
Rm: A5: KV :
Redrying temperature:
400C / 1 h
2.5 3.25 4 5 6
approximate data
REF. E 260 - A / SP
Date:2004-06-28
E3
Classification:
EN 1599: DIN 8575: AWS A-5.5: EN ISO 3580-A: EN ISO 3580-B: E CrMo2 B 42 E CrMo2 B 20+ E 9018-B3 E CrMo2 B42 H5 E 62 18-2C1M H5
d.o.o.
EVB 2 CrMo
Base materials:
Heat resistant steel Quanched and tempered steel Steel casting SIST EN 10CrMo9-10 12CrMo9-10 10CrSiMoV7 DIN 10CrMo9-10 12CrMo9-10 30CrMoV9 GS-18CrMo9.10 W.Nr. 1.7380 1.7375 1.8075 1.7707 1.7379
Heat treatment:
Stress relieved: 690 C / 2 h, oven-cooling down to 400 C and then cooled on the air.
Coating type:
Basic
Welding current:
DC +
Welding positions:
ReL / Rp 0.2:
Rm: A5: KV :
Redrying temperature:
400C / 1 h
2.5 3.25 4 5 6
approximate data
REF. E 280 - A / SM
Date:2011-12-08
E4
Classification:
E Z B42 H5 E 55 18-3C1MV
d.o.o.
EVB P24
Base materials
Creep resistant steels P24 Cr Mo and Cr Mo V steels
Heat treatment:
Stress relieved: 2h / 690 C oven-cooling down to 400 C and then cooled on the air. Where necessary PWHT can be omitted.
Coating type:
Basic
Welding current:
DC +
Welding positions:
Mechanical properties: Yield strength ReL / Rp Tensile strength Rm:
0.2:
as welded
2
PWHT
2
typ. 720 MPa(N/mm ) > 450 MPa(N/mm ) typ. 840 MPa(N/mm ) 585-840 MPa(N/mm ) > 15 % > 40 J > 15 % > 40 J (tip. 150J)
2 2
Redrying temperature:
400C / 1 h
< 5 ml / 100 g weld metal Packing Weight/ Packet kg Weight/ carton kg 17 20 27 27 27 Weight/ 1000 pcs kg *
2.5 3.25 4 5 6
approximate data
REF. E 285 - A / M
Date:2005-07-14
E5
Classification:
EN 1599: DIN 8575: AWS A-5.4: EN ISO 3580-A: EN ISO 3580-B: E CrMo5 B 42 E CrMo5 B 20+ E 502-15 E CrMo5 B42 H5 E 55 15 5CM-H5
d.o.o.
EVB 5 CrMo
Base materials:
Heat and H2 resistant steel Steel casting SIST EN X12CrMo5 GX12CrMo5 DIN 12 CrMo 19 5 GS-12CrMo 19 5 W.Nr. 1.7362 1.7363
Heat treatment:
Stress relieved: 730 C / 2 h and then cooled on the air.
Coating type:
Basic
Welding current:
DC +
Welding positions:
ReL / Rp 0.2:
Rm: A5: KV :
Redrying temperature:
400C / 1 h
2.5 3.25 4 5
approximate data
REF. E 330 - A / SP
Date:2004-06-28
E6
Classification:
EN 1599: DIN 8575: AWS A-5.4: EN ISO 3580-A: EN ISO 3580-B: E CrMo9 B 42 E CrMo9 B 20+ E 505-15 E CrMo9 B42 H5 E 62 15-9C1M H5
d.o.o.
EVB 9 CrMo
Base materials:
Heat and H2 resistant steel Steel castings SIST EN X11CrMo9-1 X12CrMo7 GX12CrMo10-1 DIN X12CrMo9-1 G-X 12 CrMo 10 1 W.Nr. 1.7386 1.7368 1.7389
Heat treatment:
Stress relieved: 760 C / 1 h and then cooled on the air.
Coating type:
Basic
Welding current:
DC +
Welding positions:
ReL / Rp 0.2:
Rm: A5: KV :
Redrying temperature:
400C / 1 h
2.5 3.25 4 5
approximate data
REF. E 300 - A / SP
Date:2000-01-04
E7
Classification:
EN 1599: DIN 8575: AWS/ ASME EN ISO 3580-A: EN ISO 3580-B: E Cr Mo V1 B E Cr Mo V1B 20 + E CrMoV1 B32 H5 E 55 16-GH5
d.o.o.
EVB CrMoV
Base materials:
Low alloy cast steels of similar composition - GS 17 CrMoV 5 11
Welding current:
DC + AC (OCV > 70V)
Welding positions:
ReL / Rp 0.2:
Rm: A5: KV :
Redrying temperature:
300-350C
Approvals:
TV
approximate data
REF. E 265 - A / MS
Date:2012-01-09
E8
Classification:
EN 1599: EZ B 42 H5 EN ISO 3580-A: EZ B 42 H5 EN ISO 3580-B: E 62 16-3C1 MV H5
d.o.o.
EVB 3 CrMoV
Base materials:
Creep resistant steel Fine grained steel SIST EN 10CrMo11 17CrMoV10 DIN 10CrMo11 17CrMoV10 W.Nr. 1.7276 1.7766
Heat treatment:
Preheating and interpass temperature should be 200-250C. Stress relieved: 690 - 730 C / 2h then cooled in the oven till 300C.
Coating type:
Basic
Welding current:
DC + (OCV > 70V)
Welding positions:
ReL / Rp 0.2:
Rm: A5: KV :
Redrying temperature:
400C / 1 h 350C / 2 h
2.5 3.25 4 5 6
approximate data
REF. E 301 - A / MS
Date:2010-02-16
E9
Classification:
EN 1599: AWS A-5.5: EN ISO 3580-A: EN ISO 3580-B: E CrMo91B42 E 9016-B9 E CrMo91 B42 H5 E 62 15-9C1MV1 H5
d.o.o.
EVB 9 CrMoV
Base materials:
Heat and H2 resistant boiler, Tube and pipe steel SIST EN X11CrMo9-1 X20CrMoV11-1 DIN X12CrMo9-1 X20CrMoV12-1 W.Nr. 1.7386 1.4922
Heat treatment:
Stress relieved: 750 C / 2 h, oven-cooling down to 300 C and then cooled on the air.
Coating type:
Basic
Welding current:
DC +
Welding positions:
ReL / Rp 0.2:
Rm: A5: KV :
Redrying temperature:
400C / 1 h
2.5 3.25 4 5
approximate data
REF. E 341 - A / SP
Date:2005-10-02
E10
Classification:
EN 1599: AWS 5.5: EN ISO 3580-A: EN ISO 3580-B: ECrMo 91B 42 E 9018-B9 E CrMo91 B42 H5 E 62 15-9C1MV H5
d.o.o.
EVB 91 CrMoV
Base materials:
SIST EN DIN X11CrMo9-1 X12CrMo9-1 X20CrMoV11-1 X20CrMoV12-1 X20CrMoWV12-1 ASTM (A199GrT9; A335Gr.P9; A351; A213/213 M Gr.T/P91; Gr.T/P92 Heat and H2 resistant boiler, tube and pipe steel W.Nr. 1.7386 1.4922 1.4935
Heat treatment:
Stress relieved: 750 C / 2 h, oven-cooling down to 300 C and then cooled on the air.
Coating type:
Basic
Welding current:
DC +
Welding positions:
ReL / Rp 0.2:
Rm: A5: Av :
Redrying temperature:
400C / 1 h
2.5 3.25 4 5
approximate data
REF. E 304 A /M
Date:2005-07-08
E11
Classification:
EN 1599 AWS A 5.5 EZCrMoWVNb 911B42 H5 E 9015- B9 (mod)
d.o.o.
EVB 911 W
Base materials:
DIN: Heat and H2 resistant boiler, tube and pipe steels: Cast: X 11 CrMoWVNb 911 G-X12CrMoWVNbN10 11 W.Nr.: 1.4905 1.4926
Heat treatment:
Stress relieved: 750 C / 2 h, oven-cooling down to 300 C and then cooled on the air.
Coating type:
Basic
Welding current:
DC +
Welding positions:
Mechanical properties: Yield strength Tensile strength Rp 0.2 %: Rm: A5: Av : > 520 N/mm2 620 850 > 17 > 50 N/mm2 % J (20C)
Redrying temperature:
400C / 1 h
2.5 3.25 4 5
approximate data
REF. E299 A /M
Date:2012-01-10
E12
Classification:
AWS A-5.5: SN 05 5010: EN ISO 3580-A: EN ISO 3580-B: E 8016-B3 E Mo1Cr-15B E Z B42 H5 E 55 18-1M3 H5
d.o.o.
EVB Mo1Cr
Base materials:
Creep resistant steels SN: 15 123
Heat treatment:
Stress relieved: 680-710 C / 1 h then cooled on the air.
Coating type:
Basic
Welding current:
Welding positions:
ReL / Rp 0.2:
Rm: A5: KV :
MPa(N/mm )
2
MPa(N/mm )
2
Redrying temperature:
400C / 1 h
% J (+20C)
2.5 3.25 4 5 6 8
approximate data
REF. E 255 - A / MS
Date:2012-01-09
E13
Classification:
EN 499: DIN 8575: AWS A-5.4: EN ISO 3580-A: EN ISO 3580-B: EN ISO 2560-A: EN ISO 2560-B: E 46 A Mo R 12 E Mo R 22 E 8013-G E Mo R 12 E 55 13 1M3 A E 46 A Mo R 12 E 55 13-1M3 A
d.o.o.
ETiMo
Base materials:
Unalloyed steels: Boiler plates: Pipe steels: DIN: St 37 to St 52 H I, H II, H III 17 Mn4, 19 Mn5, 15 Mo3 St 35.8, St 45.8 15 Mo3 W.Nr.: 1.0037 to 1.0570 1.0345, 1.0425, 1.0435 1.0481, 1.0482, 1.5415 1.0305, 1.0405 1.5415
Coating type:
Rutile
Welding current:
AC DC -
Welding positions:
ReL / Rp 0.2:
Rm: A5: KV :
MPa(N/mm ) MPa(N/mm )
% J (+20C)
2
Redrying temperature:
120C / 1 h
2.5 3.25 4 5
approximate data
REF. E 310 - A / SP
Date:2004-06-28
F1
Classification:
EN 1599: DIN 8575: AWS A-5.5: EN ISO 3580-A: EN ISO 3580-B: E MoV R 12 E MoV R 22 E 8013-G E MoV R 12 E 55 13 G
d.o.o.
E TiMoV
Base materials:
DIN: Boiler plates and tubes: 14 MoV63, 21 MoV53, 17 MoV84, 24 CrMoV 55 10CrSiMoV7 W.Nr.: 1.7715, 1.5404, 1.5406, 1.7733 1.8075
Heat treatment:
Stress relieved: 700 C / 2 h and then cooled on the air.
Coating type:
Rutile
Welding current:
AC DC -
Welding positions:
ReL / Rp 0.2:
Rm: A5: KV :
MPa(N/mm ) MPa(N/mm )
% J (+20C)
2
Redrying temperature:
120C / 1 h
2.5 3.25 4 5
approximate data
REF. E 315 - A / SP
Date:1998-08-24
F2
Classification:
EN 1599: DIN 8575: AWS A-5.5: EN ISO 3580-A: EN ISO 3580-B: E CrMo1 R 12 E CrMo1 R 22 E 8013-G E CrMo1 R 12 E 55 13 1CM
d.o.o.
E TiCrMo
Base materials:
Boiler plates and tubes: DIN: 13CrMo44 15CrMo3 13CrMoV42 (HIV) W.Nr.: 1.7335
Heat treatment:
Stress relieved: 680 C / 2 h, oven-cooling down to 300 C and then cooled on the air.
Coating type:
Rutile
Welding current:
AC DC -
Welding positions:
ReL / Rp 0.2:
Rm: A5: KV :
MPa(N/mm ) MPa(N/mm )
% J (+20C)
2
Redrying temperature:
120C / 1 h
2.5 3.25 4 5
approximate data
REF. E 320 - A / SP
Date:2004-06-28
F3
Classification:
EN 1599: DIN 8575: AWS A-5.5: EN ISO 3580-A: EN ISO 3580-B: E CrMo2 R 12 E CrMo2 R 22 E 9013-G E CrMo2 R 12 E 62 13 2C1M
d.o.o.
E Ti 2CrMo
Base materials:
Heat resistant steels: DIN: 10CrMo9.10 15CrSiMoV7 12CrSiMo8 W.Nr.: 1.7380
Heat treatment:
Stress relieved: 690 C / 2 h, oven-cooling down to 400C and then cooled on the air.
Coating type:
Rutile
Welding current:
AC DC -
Welding positions:
ReL / Rp 0.2:
Rm: A5: KV :
MPa(N/mm ) MPa(N/mm )
% J (+20C)
2
Redrying temperature:
120C / 1 h
2.5 3.25 4 5
approximate data
REF. E 325 - A / SP
Date:2005-07-08
F4
Classification:
EN 1599: DIN 8575: AWS A-5.5: EN ISO 3580-A: EN ISO 3580-B: E CrMo5 R 12 E CrMo5 R 22 E 8013-B6 E CrMo 5 R 12 E 62 13 5CM
d.o.o.
E Ti 5CrMo
Base materials:
Heat and H2 resistant steels: DIN: 12CrMo9.15 W.Nr.: 1.7380
Heat treatment:
Stress relieved: 730 C / 2 h and then cooled on the air.
Coating type:
Rutile
Welding current:
AC DC -
Welding positions:
ReL / Rp 0.2:
Rm: A5: KV :
MPa(N/mm ) MPa(N/mm )
% J (+20C)
2
Redrying temperature:
120C / 1 h
2.5 3.25 4 5
approximate data
REF. E 330 - A / SP
Date:2004-06-28
F5
INOX B 13 Fe . G1 INOX B 13/1 Fe .. G2 INOX B 13/4 Fe .. G3 INOX B 13/6 Fe .. G4 INOX B 17 Fe . G5 INOX B 17 MoFe ... G6
Classification:
EN 1600: DIN 8556 : AWS A-5.4: ISO 3581: W.Nr.: E 13 B 43 E 13 MPB 30+130 E 410-15 1.4009
d.o.o.
INOX B 13 Fe
Base materials:
Martensitic-ferritic steels Corrosion resistant steels: DIN X 6 Cr 13 X 6 CrAl 13 X 10 Cr 13 X 15 Cr 13 G-X 10 Cr 13 W.Nr.: 1.4000 1.4002 1.4006 1.4024 1.4006
Heat treatment:
Preheating cca.150C, interpass temperature 180-260 C, tempering temperature depending on the relevant base metal and material thickness.
Coating type:
Basic
Welding current:
DC +
Cr 13
Welding positions:
Redrying temperature:
420C / 2h Hardness: *Tempering: 840-870C/2h, oven-cooling down to 595C (55C/h), then cooled on the air
approximate data
REF. E 503 - A / MS
Date:2012-01-09
G1
Classification:
EN 1600: DIN 8556 : A-5.4: ISO 3581: W.Nr.: E 13 1 B 43 E 13 1 MPB 30+130 E 410-15 1.4018
d.o.o.
INOX B 13/1 Fe
Base materials:
Martensitic-ferritic steels Corrosion resistant steels: DIN X 6 Cr 13 X 6 CrAl 13 X 10 Cr 13 X 15 Cr 13 G-X 10 Cr 13 W.Nr.: 1.4000 1.4002 1.4006 1.4024 1.4006
Heat treatment:
Preheating temperature 150 - 200C, interpass temperature 180 - 400C, tempering temperature 650 750C, depending on the relevant base metal and material thickness.
Coating type:
Basic
Welding current:
DC +
Welding positions:
MPa(N/mm ) >450
2
tempered*
MPa(N/mm )
2
950-1100 MPa(N/mm ) 650-800 MPa(N/mm ) >6 > 15 % J(+20C) > 15 > 47 % J(+20C)
Redrying temperature:
420C / 2h
A5: KV :
approximate data
Date:2012-01-09
G2
Classification:
EN 1600: DIN 8556 : AWS A-5.4: ISO 3581: W.Nr.: E 13 4 B 43 E 13.4 MPB 30+130 E 410 NiMo-15 E 13.4 B 130 36 X 1.4351
d.o.o.
INOX B 13/4 Fe
Base materials:
Martensitic-ferritic steels Corrosion resistant steels: Alloyed steel castings: DIN X 6 Cr 13 X 5 CrNi 13 4 X 20 Cr 13 G-X 5 CrNi 13 4 G-X 5 CrNi 13 6 G-X 5 CrNiMo 12 4 G-X 5 CrNiMo 13 4 W.Nr.: 1.4000 1.4313 1.4021 1.4313 1.4407
Heat treatment:
Preheating and interpass temperature 100 - 160C, tempering temperature 580 620C, depending on the relevant base metal and material thickness.
Coating type:
Basic
Welding current:
DC +
Ni 4
Mo 0.5
Welding positions:
1080-1230 MPa(N/mm ) 830-980 MPa(N/mm ) >6 > 24 300-400 % J(+20C) HB > 15 > 47 % J (+20C)
Redrying temperature:
420C / 2h
A5: KV :
250-350 HB
*Tempering: 600 / 2h, then cooled on the air The hardness of the deposit depending on the relevant welding conditions and the chemical composition of the base metal.
approximate data
REF. E 500- A / SP
Date:2005-07-08
G3
Classification:
EN 1600: DIN 8556 : AWS A-5.4: ISO 3581:
d.o.o.
INOX B 13/6 Fe
Base materials:
Martensitic-ferritic steels Corrosion resistant steels: Alloyed steel castings: DIN X 6 Cr 13 G-X 5 CrNi 13 4 G-X 5 CrNi 13 6 W.Nr.: 1.4000 1.4313
Heat treatment:
Preheating and interpass temperature 100 - 160C, tempering temperature 580 620C, depending on the relevant base metal and material thickness.
Coating type:
Basic
Welding current:
DC +
Ni 6
Mo 0.5
Welding positions:
as welded tempered* 2 > 740 MPa(N/mm2) >600 MPa(N/mm ) 950-1100 MPa(N/mm ) 750-960 MPa(N/mm ) >8 > 24 % J (+20C) 15 > 47 % J (+20C)
2 2
Redrying temperature:
420C / 2h
A5: KV :
approximate data
REF. E 502- A / SP
Date:1998-08-27
G4
Classification:
EN 1600: DIN 8556 : AWS A-5.4: ISO 3581: W.Nr.: E 17 B 43 E 17 MPB 30+130 E 430-15 E 17 B 130 36 X 1.4015
d.o.o.
INOX B 17 Fe
Base materials:
Ferritic-martensitic steels DIN Chemical corrosion resistant X 6 Cr 17 steels: X 6 CrTi 17 X 6 CrNb 17 X 10 CrSi 18 X 10 CrAl 18 W.Nr.: 1.4016 1.4510 1.4511 1.4741 1.4742
Heat treatment:
Preheating and interpass temperature 200 300C, tempering temperature 650 - 750C, depending on the relevant base metal and material thickness.
Coating type:
Basic
Welding current:
DC +
Welding positions:
ReL / Rp 0.2:
Rm:
Tempered: 750C/2h/furnace 2 > 440 MPa(N/mm ) 590 - 740 MPa(N/mm ) 250 300 HB cca. 200 HB
2
Redrying temperature:
420C / 2h
Hardness:
as welded tempered 750C/2h/furnace The hardness of the deposit depending on the relevant welding conditions and the chemical compositions of the base metal.
approximate data
Date:2012-01-09
G5
Classification:
EN 1600: DIN 8556 : AWS A-5.4: ISO 3581: W.Nr.: E 17Mo E 17Mo E 430 Mo-15 E 17.0.1B 130 36 X 1.4115
d.o.o.
INOX B 17 MoFe
Base materials:
Ferritic steels and steel castings Chemical corr.resistant st. Quenched and tempered st. Alloyed steel castings DIN X 20 CrNi 17.2 41 Cr 4 G-X 22 CrNi 17 GS-C 25 W.Nr.: 1.4057 1.7035 1.4059 1.0619
Heat treatment:
Preheating and interpass temperature 100 200C (for joint welding operations 250 - 400C), depending on the relevant base metal and material thickness. Tempering temperature 650 - 750C to improve the toughness values in the weld metal and in the transition zone.
Coating type:
Basic
Welding current:
DC +
Welding positions:
Mechanical properties:
Hardness:
Redrying temperature:
420C / 2h
as welded tempered 700C/2h/furnace The hardness of the deposit depending on the relevant welding conditions and the chemical composition of the base metal.
approximate data
REF. E 511 - A / MS
Date:2012-01-09
G6
Notes:
INOX R 19/9 Nb H1 INOX B 19/9 Nb H2 INOX R 19/9 NC H3 INOX R 19/12/3 Nb .. H4 INOX B 19/12/3 Nb .. H5 INOX R 19/12/3 NC . H6 INOX R 19/13/4 L . H7 INOX R 22/9/3 LN . H8 INOX R 20/10/3 L .... H9 INOX R 20/25 L . H10 INOX B 20/25 L . H11
Classification:
EN 1600: DIN 8556 : AWS A-5.4: ISO 3581: W.Nr.:: E 19 9 Nb R 12 E 19.9 Nb R 26 E 347-17 E 19.9 Nb R 26 1.4551
d.o.o.
INOX R 19/9 Nb
Base materials:
Chemical corr.resistant steel: DIN: X 5 CrNi 18 10 X 6 CrNiTi 18 10 X 6 CrNiNb 18 10 G-X 6CrNi 18 9 G-X 5 CrNiNb 18.9 G-X 10 CrNi 18 8 W.Nr.: 1.4301 1.4541 1.4550 1.4308 1.4552 1.4312 AISI/ASTM: 304 321 347 A157
Coating type:
Rutile
Welding current:
AC DC +
Welding positions:
ReL / Rp 0.2:
Rm: A5: KV :
> 390
MPa(N/mm )
2
Redrying temperature:
300C / 2h
> 590 690 MPa(N/mm ) > 30 % > 47 J (+20C) typical: 70 J > 32 J (-60C)
approximate data
REF. E 543 - A / MS
Date:2012-01-09
H1
Classification:
EN 1600: DIN 8556 : AWS A-5.4: ISO 3581: W.Nr.: E 19 9 Nb B 22 E 19.9 Nb B 20+ E 347-15 E 19.9 Nb B 20+ 1.4551
d.o.o.
INOX B 19/9 Nb
Base materials:
Chemical corr.resistant steel: DIN: X 5 CrNi 18 10 X 6 CrNiTi 18 10 X 6 CrNiNb 18 10 G-X 6CrNi 18 9 G-X 5 CrNiNb 18.9 G-X 10 CrNi 18 8 W.Nr.: 1.4301 1.4541 1.4550 1.4308 1.4552 1.4312 AISI/ASTM: 304 321 347 A157
Coating type:
Basic
Welding current:
DC +
Welding positions:
Mechanical properties: Yield strength
2
ReL / Rp 0.2:
Rm: A5: KV :
> 390
MPa(N/mm )
2
Redrying temperature:
300C / 2h
Ferrite content: FN 8
Impact energy
approximate data
REF. E 545 - A / M
Date:2012-01-09
H2
Classification:
EN 1600: DIN 8556 : AWS A-5.4: ISO 3581: W.Nr.: E 19 9 LR 12 E 19.9 LR 26 E 308L-17 E 19.9 LR 26 1.4316
d.o.o.
INOX R 19/9 NC
Base materials:
Chemical corr.resistant steel: DIN: X 5 CrNi 18 10 X 2 CrNi 19 11 X 6 CrNiTi 18 10 X 6 CrNiNb 18 10 G-X 6CrNi 18 9 G-X 5 CrNiNb 18.9 W.Nr.: 1.4301 1.4306 1.4541 1.4550 1.4308 1.4552 AISI/ASTM: 304 304 L 321 347 -
Coating type:
Rutile
Welding current:
AC DC +
C 0.03
Si 0.8
Mn 0.7
Cr 19
Ni 10
Welding positions:
Mechanical properties: Yield strength
ReL / Rp 0.2:
Rm: A5: KV :
> 340
MPa(N/mm )
2
Redrying temperature:
300C / 2h
Ferrite content: FN 5
approximate data
REF. E 553 - A / MS
Date:2012-01-09
H3
Classification:
EN 1600: DIN 8556 : AWS A-5.4: ISO 3581: W.Nr.: E 19 12 3 Nb R 12 E 19.12.3 Nb R 26 E 318-17 E 19.12.3 Nb R 26 1.4576
d.o.o.
INOX R 19/12/3 Nb
Base materials:
Chemical corr.resistant steel: DIN: X 5 CrNiMo 17 12 2 X 5 CrNiMo 17 13 3 X 6 CrNiMoTi 17 12 2 X 6 CrNiMoNb 17 12 2 X 10 CrNiMoTi 18 12 X 10 CrNiMoNb 18 12 G-X 6CrNiMo 18 10 G-X 5 CrNiMoNb 18.10 W.Nr.: 1.4401 1.4436 1.4571 1.4581 1.4573 1.4583 1.4408 1.4581 AISI/ASTM: 316 316 316Ti 316Cb 316Ti 316Cb A157 316L
Coating type:
Rutile
Welding current:
AC DC +
Welding positions:
ReL / Rp 0.2:
Rm: A5: Av :
> 400
MPa(N/mm )
2
Redrying temperature:
300C / 2h
approximate data
REF. E 573 - A / SP
Date:2005-07-08
H4
Classification:
EN 1600: DIN 8556 : AWS A-5.4: ISO 3581: W.Nr.: E 19 12 3 Nb B 22 E 19.12.3 Nb B20+ E 318-15 E 19.12.3 Nb B 20+ 1.4576
d.o.o.
INOX B 19/12/3 Nb
Base materials:
Chemical corr.resistant steel: DIN: X 5 CrNiMo 17 12 2 X 5 CrNiMo 17 13 3 X 6 CrNiMoTi 17 12 2 X 6 CrNiMoNb 17 12 2 X 10 CrNiMoTi 18 12 X 10 CrNiMoNb 18 12 G-X 6CrNiMo 18 10 G-X 5 CrNiMoNb 18.10 W.Nr.: 1.4401 1.4436 1.4571 1.4581 1.4573 1.4583 1.4408 1.4581 AISI/ASTM: 316 316 316Ti 316Cb 316Ti 316Cb A157 316L
Coating type:
Basic
Welding current:
DC +
Welding positions:
Mechanical properties: Yield strength
ReL / Rp 0.2:
Rm: A5: Av :
> 400
MPa(N/mm )
2
Redrying temperature:
300C / 2h
Ferrite content: FN 9
Impact energy
approximate data
REF. E 573 - A / MS
Date:2012-01-09
H5
Classification:
EN 1600: DIN 8556 : AWS A-5.4: ISO 3581: W.Nr.: E 19 12 3 LR 12 E 19.12.3 LR 26 E 316L-17 E 19.12.3 LR 26 1.4430
d.o.o.
INOX R 19/12/3 NC
Base materials:
Chemical corr.resistant steel: DIN: X 2 CrNiMo 17 13 2 X 5 CrNiMo 17 12 2 X 5 CrNiMo 17 13 3 X 6 CrNiMoTi 17 12 2 X 6 CrNiMoNb 17 12 2 X 10 CrNiMoTi 18 12 X 10 CrNiMoNb 18 12 G-X 6 CrNiMo 18 10 G-X 5 CrNiMoNb 18.10 W.Nr.: 1.4404 1.4401 1.4436 1.4571 1.4580 1.4573 1.4583 1.4408 1.4581 AISI/ASTM: 316L 316 316 316Ti 316 Cb 316Ti 316Cb
Coating type:
Rutile
Welding current:
AC DC +
C 0.03
Si 0.8
Mn 0.7
Cr 18.5
Ni 11.5
Mo 2.7
Welding positions:
Mechanical properties: Yield strength
ReL / Rp 0.2:
Rm: A5: KV :
> 380
MPa(N/mm )
2
Redrying temperature:
300C / 2h
> 560 660 MPa(N/mm ) > 30 % > 47 J (+20C) typical: 60J > 32 J (-120C)
Ferrite content: FN 8
approximate data
REF. E 584 - A / MS
Date:2012-01-09
H6
Classification:
EN 1600: DIN 8556: AWS A 5.4: ISO 3581: W.Nr.:
d.o.o.
INOX R 19/13/4 L
Base materials:
X5 CrNiMo 17 13 X2 CrNiMoN 17 13 5 X2 CrNiMoN 17 13 3 X10CrNiMoNb 18 12 X4 CrNiMoN 22 15 X4 CrNiMoN 19 16 5 W.-Nr. 1.4449 1.4439 1.4429 1.4583 1.3951 1.3964
Heat treatment:
Preheating and post weld heat treatment is not required by the weld metal. Interpass temperatures shall not exceed 150C.
Coating type:
Rutile
Welding current:
AC DC +
Welding positions:
ReL / Rp 0.2:
Rm: A5: KV :
MPa(N/mm ) MPa(N/mm )
% J ( +20 C) J ( -140 C)
2
Redrying temperature:
250C /2h
Ferrite content: FN 0
Approvals:
2 2.5 3.25 4 5
approximate data
REF. E 580 - A / M
Date:2005-07-08
H7
Classification:
EN 1600: DIN 8556 : AWS A 5.4 W.Nr.: E 22 9 32 NL 32 E 2209 L -17 1.4462
d.o.o.
INOX R 22/9/3 LN
Base materials:
Ferritic-austenitic duplex steels: W.Nr.: 1.4462 ( X 2 CrNiMoN 22 5) 1.4462 with 1.4583 ( X 10 CrNiMoNb 18 12 1.4462 with HI/HII, StE 255, 17 Mn 4, StE 355, 15 Mo 3
Coating type:
Rutile-basic
Welding current:
AC DC +/-
Welding positions:
ReL / Rp 0.2:
Rm: A5: KV :
> 540
MPa(N/mm )
2
Redrying temperature:
300C /2h
Ferrite content: FN 35
Impact energy
approximate data
REF. E 582 - A / MS
Date:2012-01-09
H8
Classification:
EN 1600: DIN 8556: AWS A 5.4: ISO 3581: W. Nr.:
d.o.o.
INOX R 20/10/3L
Base materials:
Austenitic manganese steels Joining mild or low alloyed steels to austenitic or austenitic manganese steels Cladding on carbon steels and manganese steels
Welding current:
AC DC +
Welding positions:
ReL / Rp 0.2:
Rm: A5: KV :
MPa(N/mm ) MPa(N/mm )
% J ( +20 C)
2
Redrying temperature:
250C /2h
Approvals:
2 2.5 3.25 4 5
approximate data
REF. E 583-A / M
Date:2005-07-08
H9
Classification:
EN 1600: DIN 8556: AWS A 5.4: ISO 3581: W.Nr.: E 20 25 5 Cu NL R 32 E 20 25 5 L Cu R E 385 -17 E 20.25.5 L Cu R 1.4549
d.o.o.
INOX R 20/25 L
Base materials:
X 1 NiCrMoCu 25 20 W.- Nr. 1.4539 G-X 7 NiCrMoCuNb 25 20 1.4500 X 4 NiCrMoCuNb 20 18 2 1.4505 X 5 NiCrMoCuTi 20 18 1.4506 G-X 2 NiCrMoCuN 25 20 1.4536 X 2 Cr Ni Mo Cu 25 20 6 1.4529
Coating type:
Rutile
Welding current:
AC DC +
Welding positions:
ReL / Rp 0.2:
Rm: A5: KV :
> 400
MPa(N/mm )
2
Redrying temperature:
250C /2h
Ferrite content: FN 0
Approvals:
2 2.5 3.25 4 5
approximate data
REF. E637 - S / SM
Date:2012-01-09
H10
Classification:
EN 1600: E 20 25 5 Cu NLB 23 DIN 8556: E 20 25 5 L Cu B AWS A 5.4: E 385 -15 W.Nr.: 1.4539
d.o.o.
INOX B 20/25 L
Base materials:
X 1 NiCrMoCu 25 20 W.- Nr. 1.4539 G-X 7 NiCrMoCuNb 25 20 1.4500 X 4 NiCrMoCuNb 20 18 2 1.4505 X 5 NiCrMoCuTi 20 18 1.4506 G-X 2 NiCrMoCuN 25 20 1.4536 X 2 Cr Ni Mo Cu 25 20 6 1.4529
Coating type:
Basic
Welding current:
DC +
Welding positions:
Mechanical properties: Yield strength Rp 0.2 %: Rm: A5: Av : > 380 (typ 430) MPa
Redrying temperature:
250C /2h
510 - 680 (typ 654) MPa > 30 > 47 > 47 >47 (typ 36) %
Ferrite content: FN 0
Approvals:
2 2.5 3.25 4 5
approximate data
REF. E 638 - A/ SM
Date:2.4.2012
H 11
INOX R 25/4 Fe .. I1 INOX R 25/14 NC ... I2 INOX R 25/14/3 NC I3 INOX R 25/20 .. I4 INOX B 25/20 .. I5
Classification:
EN 1600: DIN 8556 : AISI: ISO 3581: W.Nr.: E 25 4 R 43 E 25.4 MPR 33 160 446 E 25.4 R 160 33 X 1.4820
d.o.o.
INOX R 25/4 Fe
Base materials:
Ferit.-aust. and Ferit.-pearl.steel Chemical corr.resistant steel: DIN: X 20 CrNiSi 25.4 X 10CrAl7 X 10CrAl13 X 10CrAl18 X 10CrAl24 G-X30CrSi6 G-X40CrSi17 G-X40CrNiSi27.4 W.Nr.: 1.4821 1.4713 1.4724 1.4742 1.4762 1.4710 1.4740 1.4823 AISI/ASTM: 327 405 442/446 A 297 HC
Coating type:
Rutile
Welding current:
AC DC +
Welding positions:
ReL / Rp 0.2:
Rm: A5:
MPa(N/mm ) MPa(N/mm )
%
2
Redrying temperature:
300C / 2h Elongation
approximate data
REF. E 625 - A / M
Date:2011-01-09
I1
Classification:
EN 1600: DIN 8556 : AWS A-5.4: ISO 3581: W.Nr.: E 23 12 LR 32 E 23.12 LR 26 E 309L-17 E 23.12 LR 26 1.4332
d.o.o.
INOX R 25/14 NC
Base materials:
Austenitic, ferritic-pearl. steels DIN: Chemical corr.resistant steel: X 15 CrNiSi 20 12 X 7 CrNi 23 14 X 10 CrAl 7 X 10 CrAl 13 X 10 CrAl 18 Alloyed steel castings: G-X 30 CrSi 6 G-X 40 CrSi 17 G-X 40CrNiSi 22 9 W.Nr.: 1.4828 1.4833 1.4713 1.4724 1.4742 1.4710 1.4740 1.4826 AISI/ASTM: 309 405 -
Heat treatment:
Preheating and interpass temperatures for ferritic steels 200 - 300C.
Coating type:
Rutile
Welding current:
AC DC +
C 0.04
Si 0.9
Mn 0.7
Cr 23
Ni 13
Welding positions:
Mechanical properties: Yield strength
ReL / Rp 0.2:
Rm: A5: KV :
> 400
MPa(N/mm )
2
Redrying temperature:
300C / 2h
Ferrite content: FN 15
approximate data
REF. E 642 - A / SM
Date:2010-02-16
I2
Classification:
EN 1600: DIN 8556 : AWS A-5.4: ISO 3581: W.Nr.: E 23 12 2 LR 32 E 23.13.2 LR 26 E 309MoL-17 E 23.13.2 LR 26 1.4459
d.o.o.
INOX R 25/14/3 NC
Base materials:
- High-strength, unalloyed and alloyed constructional steels and heat treatable steels among themselves or among each other. - Unalloyed and alloyed boiler steels or constructional steels with highly alloyed chromium, CrNi and CrNiMo steels. - Combination between ferritic and austenitic steels for steam boiler and pressure vessel constructions. - Weld claddings: for the first layer of corrosion resistant weld claddings on HI, HII,StE 255, 17Mn4, StE 355-StE500 - For the first layer of corrosion resistant weld claddings on high.temperature, heat treated, fine-grained constructional steels.
Coating type:
Rutile
Welding current:
AC DC +
C 0.04
Si 0.8
Mn 0.6
Cr 23
Ni 13
Mo 3
Welding positions:
Mechanical properties: Yield strength
ReL / Rp 0.2:
Rm: A5: KV :
> 490
MPa(N/mm )
2
Redrying temperature:
300C / 2h
Ferrite content: FN 20
approximate data
REF. E 641 - A / SM
Date:2012-01-09
I3
Classification:
EN 1600: DIN 8556 : AWS A-5.4: ISO 3581: W.Nr.: E 25 20 R 32 E 25 20 R 26 E 310-16 E 25.20 R 26 1.4842
d.o.o.
INOX R 25/20
Base materials:
Aust. and Ferrit.-pearl. steels DIN: Chemical corr.resistant steel: X 15 CrNiSi25.20 X 12CrNi25.21 X 15CrNiSi20.12 X 10CrAl7, X 10CrAl13 X 10CrAl18, X 10CrAl24 Alloyed steel castings: G-X30CrSi6,G-40CrSi17 G-X15CrNiSi25.20 G-X40CrNiSi25.12 G-X40CrNiSI22.9 W.Nr.: 1.4841 1.4845 1.4828 1.4713, 1.4724 1.4742, 1.4762 1.4710, 1.4740 1.4741 1.4837 1.4826 AISI/ASTM: 310/314 310S 309 405 442/446 A 297 HF
Heat treatment:
Preheating and interpass temperatures for ferritic steels 200 - 300C, depending on the relevant base metal and material thickness. The temperature range between 650 and 900C should be avoided owing to the risk of embrittlement. Thick-walled weldments to be carried out by means of the basic electrode INOX B 25/20.
Coating type:
Rutile
Welding current:
AC DC +
Welding positions:
ReL / Rp 0.2:
Rm: A5: KV :
> 300
MPa(N/mm )
2
Redrying temperature:
300C / 2h
Ferrite content: FN 0
approximate data
REF. E 635- A / SM
Date:2010-02-16
I4
Classification:
EN 1600: DIN 8556 : AWS A-5.4: ISO 3581: W.Nr.: E 25 20 B 42 E 25 20 B 20+ E 310-15 E 25.20 B 20+ 1.4842
d.o.o.
INOX B 25/20
Base materials:
(Aust. and Ferit.-pearl. steel) DIN: Chemical corr.resistant steel: X 15 CrNiSi25.20 X 12CrNi25.21 X 15CrNiSi20.12 X 10CrAl7, X 10CrAl13 X 10CrAl18, X 10CrAl24 Alloyed steel castings: G-X30CrSi6,G-40CrSi17 G-X15CrNiSi25.20 G-X40CrNiSi25.12 G-X40CrNiSI22.9 W.Nr.: 1.4841 1.4845 1.4828 1.4713, 1.4724 1.4742, 1.4762 1.4710, 1.4740 1.4741 1.4837 1.4826 AISI/ASTM: 310/314 310S 309 -, 405 -, 442/446 A 297 HF
Heat treatment:
Preheating and interpass temperatures for ferritic steels 200 - 300C, depending on the relevant base metal and material thickness. The temperature range between 650 and 900C should be avoided owing to the risk of embrittlement.
Coating type:
Basic
Welding current:
DC +
Welding positions:
Mechanical properties: Yield strength
2
ReL / Rp 0.2:
Rm: A5: Av :
> 300
MPa(N/mm )
2
Redrying temperature:
300C / 2h
Ferrite content: FN 0
Impact energy
approximate data
REF. E 630- A / SP
Date:2005-07-08
I5
ELECTRODES
INOX R 22/12/3 Fe . J1 INOX B 18/8/6 . J2 INOX R 18/8/6 Fe ... J3 INOX R 18/8/6 ............................ J4 INOX R 29/9 J5 INOX R 29/9 Fe J6 INOX B 70/15 . J7
Classification:
EN 1600: DIN 8556 : AWS A-5.4: ISO 3581: E 309 Mo-16 E 23.12.2 R 160 33X
d.o.o.
INOX R 22/12/3 Fe
Base materials:
Austen. and Ferrit.-pearl.steels DIN Chemical corr.resistant st.: X 15 CrNiSi 20 12 X 10CrAL 7 X 10CrAl 13 X 10CrAl 18 Alloyed steel castings: G-X 40 CrNiSi 22 9 G-X 30 CrSi 6 G-X 40 CrSi 17 W.Nr.: 1.4828 1.4713 1.4724 1.4742 1.4826 1.4710 1.4740 AISI/ASTM: 309 405
Coating type:
Rutile
Welding current:
AC DC +
C 0.05
Si 0.8
Mn 0.8
Cr 23
Ni 13
Mo 2,8
Welding positions:
Mechanical properties: Yield strength
ReL / Rp 0.2:
Rm: A5: KV :
> 400
MPa(N/mm )
2
Redrying temperature:
300C / 2h
1.6 250 2 300 2.5 300 3.25 350 4 450 4 350 5 450 * approximate data
Date:2012-01-09
J1
Classification:
EN 1600: DIN 8556 : AWS A-5.4: ISO 3581: W.Nr.: E 18 8 Mn B 22 E 18 8 Mn B 20+ E 307-15 E 18.8 Mn B 20+ 1.4370
d.o.o.
INOX B 18/8/6
Base materials:
Wear resistant steels high carbon content High strength unalloyed and alloyed constructional steels + SS High manganese steels Unalloyed and alloyed boiler grade steels or constructional steels with highly alloyed Cr and CrNi steels. Interpass for hardfacing and repair of cavitation foults
Coating type:
Basic
Welding current:
DC +
Welding positions:
Mechanical properties: Yield strength
ReL / Rp 0.2:
Rm: A5: KV :
Redrying temperature:
300C / 2h
Ferrite content: 0
Impact energy
approximate data
REF. E 670- A / MS
Date:2012-01-09
J2
Classification:
EN 1600: DIN 8556 : AWS A-5.4: ISO 3581: W. Nr.: E 18 8 Mn R 53 E 18 8 Mn MPR 33 160 E 307-16 E 18.8 Mn R 160 33X 1.4370
d.o.o.
INOX R 18/8/6 Fe
Base materials:
High carbon steels High strength alloyed and alloyed heat treatable steels High Manganese steels Constructional steels and ferritic, austenitic steels Repair for cavitation foults Interpass for hardfacing
Heat treatment:
Preheating and postweld heat treatment as required by the base metal.
Coating type:
Rutile
Welding current:
AC DC +
C 0.08
Si < 1.2
Mn 7
Cr 19
Ni 9
Welding positions:
Mechanical properties: Yield strength
ReL / Rp 0.2:
Rm: A5: KV :
> 350
MPa(N/mm )
2
Redrying temperature:
300C / 2h
2 2.5 3.25 4 5 *
approximate data
REF. E 675 - A / MS
Date:2012-01-09
J3
Classification:
EN 1600: DIN 8556 : AWS A-5.4: ISO 3581: W.Nr.: E 18 8 Mn R 12 E 18 8 Mn R 26 E 307-17 E 18 8 Mn R 1.4370
d.o.o.
INOX R 18/8/6
Base materials:
High carbon steels High strength alloyed and alloyed heat treatable steels High Manganese steels Constructional steels and ferritic, austenitic steels Repair for cavitation foults Interpass for hardfacing
Heat treatment:
Preheating and post-weld heat treatment as required by the base metal.
Coating type:
Rutile
Welding current:
AC DC +
C 0.1
Si < 1.2
Mn 5
Cr 18
Ni 8.5
Welding positions:
Mechanical properties: Yield strength
ReL / Rp 0.2:
Rm: A5: KV :
Redrying temperature:
300C / 2h
Ferrite content: FN 0
2 2.5 3.25 4 5 *
approximate data
REF. E 673 - A / M
Date:2012-01-09
J4
Classification:
EN 1600: DIN 8556 : AWS A-5.4: ISO 3581: W.Nr.: E 29 9 R 12 E 29 9 R 26 E 312-17 E 29.9 R 26 1.4337
d.o.o.
INOX R 29/9
Base materials:
Hardwelding steels High-strength unalloyed and alloyed steels Structural, spring, tool and heat treatable steels High manganese steels
Heat treatment:
Preheating and postweld heat treatment as required by the base metal.
Coating type:
Rutile
Welding current:
AC DC +
Mechanical properties:
Welding positions:
Yield strength Tensile strength
ReL / Rp 0.2:
Rm: A5: cca.235 HB
> 500
MPa(N/mm )
2
Redrying temperature:
300C / 2h
Elongation Hardness
Ferrite content: FN 40
The hardness of the deposit depending on the relevant welding conditions and the chemical composition of the base metal.
approximate data
REF. E 683- A / MS
Date:2012-01-09
J5
Classification:
EN 1600: DIN 8556 : AWS A-5.4: W. Nr.: E 29 9 R 53 E 29 9 R - 26 E 312-26 1.4337
d.o.o.
INOX R 29/9 Fe
Base materials:
Hardwelding steels High-strength unalloyed and alloyed steels Structural, spring, tool and heat treatable steels High manganese steels
Heat treatment:
Preheating and postweld heat treatment as required by the base metal.
Coating type:
Rutile
Welding current:
AC DC +
Mechanical properties:
Welding positions:
Yield strength Tensile strength
ReL / Rp 0.2:
Rm: A5: cca.235 HB
> 500
MPa(N/mm )
2
Redrying temperature:
300C / 2h
Elongation Hardness
The hardness of the deposit depending on the relevant welding conditions and the chemical composition of the base metal.
1.6 250 2 300 2.5 300 3.25 350 4 450 4 350 5 450 * approximate data
REF. E 685- A / M
Date:2006-04-14
J6
Classification:
DIN 1736 : AWS A-5.11: W.Nr.: EL NiCr15FeMn E NiCrFe-3 2.4620
d.o.o.
INOX B 70/15
Base materials:
Unalloyed and alloyed, high-temperature, creep resisting, low-temperature steels to X 8 Ni 9 High-alloyed Cr and CrNi steels, particularly for joint welding of dissimilarly alloyed materials, Ni and Ni-alloys and nickel-steel combinations. Joint welding cooper with stainless steel.
Coating type:
Basic
Welding current:
DC +
Welding positions:
ReL / Rp 0.2:
Rm: A5: KV : 170 HB
Redrying temperature:
250 - 300C / 1-2h
Ferrite content: FN 0
Hardness:
approximate data
REF. E 491- A / M
Date:2012-01-09
J7
d.o.o.
HARDFACING ELECTRODES
UTOP 38 .. K1 UTOP 43 .. K2 UTOP 45 .. K3 UTOP 52 .. K4 UTOP 55 .. K5 TOOLDUR ... K6 E DUR 250 ... K7 E DUR 300 K8 E DUR 400 ... K9 E DUR 500 K10 E DUR 600 K11 E DUR 60R . K12 E DUR 600Si .. K13 TOOLDUR Co K14 E DUR 13 Cr .. K15
Classification:
EN 14 700: DIN 8555: E Fe 3 E 3-UM-40 T
d.o.o.
UTOP 38
Base materials:
Welding current:
DC +
V 0.2
W +
Welding positions:
Mechanical properties: Hardness: Welded: 36-42 HRC (typical: 37 HRC)
Redrying temperature:
400C / 1h The hardness of the deposit depending on the relevant welding conditions and the chemical composition of the base metal.
approximate data
REF. E 750- A / MS
Date: 2012-01-09
K1
Classification:
EN 14 700: DIN 8555: E Fe 3 E 3-UM-400PT
d.o.o.
UTOP 43
Base materials:
Welding current:
DC +
Mo 0.5
V 0.6
Welding positions:
Mechanical properties: Hardness: as welded PWHT 550C/2h PWHT 800C/2h 40- 45 HRC (typical: 45 HRC) 45-50 HRC ( typical 50HRC) 25-35 HRC ( typical 31HRC)
Redrying temperature:
400C / 1h
The hardness of the deposit depending on the relevant welding conditions and the chemical composition of the base metal.
approximate data
REF A / MS
Date: 2010-09-15
K2
Classification:
EN 14 700: E Fe 3 DIN 8555: E3-UM-45-T
d.o.o.
UTOP 45
Coating type:
Basic
Welding current:
DC +
Welding positions:
Mechanical properties: Hardness: As welded: PWHT 550C/2h PWHT 800C/2h 42-50HRC 45-53 HRC 20-35 HRC
The hardness of the deposit depending on the relevant welding conditions and the chemical composition of the base metal
approximate data
REF.E -A/MS
Date:02. 04. 12
K3
Classification:
EN 14 700: E Fe 3 DIN 8555: E3-UM-60-T
d.o.o.
UTOP 52
Coating type:
Basic
Welding current:
DC +
Welding positions:
Mechanical properties: Hardness: As welded: PWHT 550C/2h -8h 50-59 HRC 53-58 HRC
Redrying temperature:
300-350C / 2 h or 400C / 1 h The hardness of the deposit depending on the relevant welding conditions and the chemical composition of the base metal
approximate data
REF.E-MS-A/MS
Date:02. 04. 12
K4
Classification:
EN 14 700: DIN 8555: E Fe 4 E 6-UM-60 T
d.o.o.
UTOP 55
Base materials:
Welding current:
DC +
V 0.6
W +
Welding positions:
Mechanical properties: Hardness: Welded: 55-60 HRC (typical: 57 HRC) The hardness of the deposit depending on the relevant welding conditions and the chemical composition of the base metal.
Redrying temperature:
400C / 1h
approximate data
REF. E 760- A / MS
Date: 2012-01-09
K5
Classification:
EN 14 700: E Fe 4 DIN 8555: E 4-UM-60 65 S AWS A 5.13: E Fe5-B
d.o.o.
TOOLDUR
Base materials:
Heat treatment:
The ground material should be preheated to 600-700C Hardening: 1180-1240C (air) Stress relief: 510-540C/ 2X1h (air) Soft annealing: 820-850C/2-4h (furnace)
Coating type:
Basic
Welding current:
AC DC +
Cr 4.4
Mo 7.0
W 1.2
V 0.9
Welding positions:
Mechanical properties: Hardness: Welded: 50-64 HRC (typical: 61 HRC) Hardened: 62-66 HRC Soft annealed: 25-30 HRC
Redrying temperature:
300C / 2h
approximate data
REF. E 770- A / MS
Date: 2012-01-09
K6
Classification:
EN 14 700: DIN 8555: E Fe 3 E 1-UM-250
d.o.o.
E DUR 250
Base materials:
Welding current:
DC +
Mn 1.3
Welding positions:
Mechanical properties:
Hardness:
230-300 HB
Redrying temperature:
400C / 1h
The hardness of the deposit depending on the relevant welding conditions and the chemical composition of the base metal.
approximate data
REF. E 791- A / SP
Date: 2005-02-28
K7
Classification:
EN 14 700 : DIN 8555: E Fe 1 E 1-UM-300
d.o.o.
E DUR 300
Base materials:
Welding current:
DC +
Mn 1.5
Welding positions:
Mechanical properties:
Hardness:
280-350 HB
Redrying temperature:
400C / 1h
The hardness of the deposit depending on the relevant welding conditions and the chemical composition of the base metal.
approximate data
REF. E 801- A / M
Date: 2010-06-18
K8
Classification:
EN 14 700 : DIN 8555: E Fe 3 E 1-UM-400
d.o.o.
E DUR 400
Base materials:
Welding current:
DC +
Mn 1.7
Welding positions:
Mechanical properties:
Hardness:
350-450 HB
Redrying temperature:
400C / 1h
The hardness of the deposit depending on the relevant welding conditions and the chemical composition of the base metal.
approximate data
REF. E 811- A / M
Date: 2010-06-18
K9
Classification:
EN 14 700: DIN 8555: E Fe 3 E 1-UM-50
d.o.o.
E DUR 500
Base materials:
Coating type:
Basic
Welding current:
DC +
Cr 2.3
Welding positions:
Mechanical properties: Hardness: 47 - 52 HRC (tipical: 51 HRC)
Redrying temperature:
400C / 1 h
Interpass temperature for the weld metal approx.350C. The hardness of the deposit is greatly influenced by the degree of dilution with the base metal (depending on the relevant welding condition) and by its chemical composition. The influences of these factors decreases as the number of layers gets higher.
2.5 3.25 4 5 6
approximate data
REF. E 815 - A / SP
Date:2005-07-08
K10
Classification:
EN 14 700 : DIN 8555: E Fe 8 E 6-UM-60
d.o.o.
E DUR 600
Base materials:
Welding current:
DC +
Cr 8.5
Welding positions:
Mechanical properties:
Hardness:
57-62 HRC
(typical: 59 HRC)
Redrying temperature:
400C / 1h
The hardness of the deposit depending on the relevant welding conditions and the chemical composition of the base metal.
approximate data
REF. E 821- A / SP
Date: 2005-07-08
K11
Classification:
EN 14 700: DIN 8555: E Fe 8 E 6-UM-55
d.o.o.
E DUR 60 R
Base materials:
Coating type:
Rutile
Welding current:
DC + (DC -) AC
Cr 5
Mo 1
Welding positions:
Mechanical properties:
Redrying temperature:
350C / 1h
Hardness:
55- 60 HRC
(typical: 60 HRC)
The hardness of the deposit depending on the relevant welding conditions and the chemical composition of the base metal.
approximate data
REF. E 821- A / M
Date: 2005-07-08
K12
Classification:
EN 14 700: E Fe 8 DIN 8555: E 6-UM-55
d.o.o.
E DUR 600Si
Base materials:
Coating type:
Basic
Welding current:
DC +
Mn 0,5
Cr 8
Welding positions:
Mechanical properties:
(typical: 58 HRC)
Redrying temperature:
350C / 1h
The hardness of the deposit depending on the relevant welding conditions and the chemical composition of the base metal.
approximate data
REF. E825-A / M
Date: 2005-07-08
K 13
Classification:
EN 14 700: E Fe 3 DIN 8555: E 3-UM-50CTZ
d.o.o.
TOOLDUR Co
Base materials:
Low alloyed steels Alloyed tool steels High temperature steels and cast steels
Heat treatment:
Preheating: 150-400C according to weld. Hardening: 1100-1150C (air) Soft- annealing: 850-900C Tempering: 700C
Coating type:
Rutile-basic
Welding current:
AC DC +
Ni 1
Mo 4,5
Co 12,5
Fe rest
Welding positions:
Mechanical properties:
Hardness:
Redrying temperature:
300C / 2h
untreated 48-52 HRC Hardened 48-52 HRC Soft-annealed about 34HRC Tempered 38-42 HRC
Metal recovery:
The hardness of the deposit depending on the relevant welding conditions and the chemical composition of the base metal.
approximate data
Date: 2012.01.09
K14
Classification:
EN 14 700 : DIN 8555: E Fe 8 E 5-UM-CGP
d.o.o.
E DUR Cr 13
Heat treatment:
Preheat and inter-pass temperature at least 200C, soft annealing 820C, hardening 950-1000C with cooling in compressed air or oil.
Coating type:
Basic
Welding current:
DC +
Mn 0,8
Cr 13
Welding positions:
Mechanical properties:
Hardness:
49-56 HRC
Redrying temperature:
350C / 1h
The hardness of the deposit depending on the relevant welding condition and the chemical composition of the base metal.
approximate data
REF. E 835 - A / M
Date:2005-07-14
K15
ELECTRODES, PRODUCING
d.o.o.
Classification:
EN 14 700: DIN 8555: E Fe 8 E 6-UM-55-G
d.o.o.
ABRADUR 54
Base materials:
Heat treatment:
Preheating is not required.
Coating type:
Basic
Welding current:
AC DC +
Cr 9.5
Welding positions:
Hardness:
52-56 HRC
Redrying temperature:
300C / 2h Wear coeff.: 70%
Metal recovery:
110%
The hardness of the deposit depending on the relevant welding conditions and the chemical composition of the base metal.
approximate data
REF. E 766- A / M
Date: 2012-01-09
L1
Classification:
EN 14 700: DIN 8555: E Fe 14 E 10-UM-60-GR
d.o.o.
ABRADUR 58
Base materials:
Heat treatment:
Preheating is not required.
Coating type:
Rutile
Welding current:
AC DC +
Welding positions:
Mechanical properties:
Hardness:
(20C)
Redrying temperature:
300C / 2h
Wear coeff.:
Metal recovery:
180%
The hardness of the deposit depending on the relevant welding conditions and the chemical composition of the base metal.
approximate data
REF. E 768- A / M
Date: 2012-01-09
L2
Classification:
EN 14 700: DIN 8555: E Fe 14 E 10-UM-60-GR
d.o.o.
ABRADUR 60
Base materials:
Heat treatment:
Preheating is not required.
Coating type:
Rutile
Welding current:
AC DC +
V 0,7
Welding positions:
Hardness:
59-64 HRC
typical: 60 HRC
Redrying temperature:
300C / 2h
Wear coeff.:
= 40% G= 0,9
Metal recovery:
The hardness of the deposit depending on the relevant welding conditions and the chemical composition of the base metal.
approximate data
REF. E 767 A /M
Date: 2005-07-08
L3
Classification:
EN 14 700 : DIN 8555: E Fe 15 E 10-UM-65-GR
d.o.o.
ABRADUR 64
Base materials:
Heat treatment:
Preheating is not required.
Coating type:
Basic
Welding current:
AC DC +
Nb 7.5
Welding positions:
Mechanical properties:
Hardness:
typical: 64 HRC
(20C)
Redrying temperature:
300C / 2h
Wear coeff.:
Metal recovery:
190%
The hardness of the deposit depending on the relevant welding conditions and the chemical composition of the base metal.
approximate data
REF. E 771- A / MS
Date: 2012-01-09
L4
Classification:
EN 14 700: DIN 8555: E Fe 16 E 10-UM-65-G
d.o.o.
ABRADUR 65
Base materials:
Heat treatment:
Preheating is not required.
Coating type:
Basic
Welding current:
AC DC +
Mo 2.0
Welding positions:
Mechanical properties:
Redrying temperature:
300C / 2h
62-67 HRC 2%
typical: 65 HRC
(20C)
Metal recovery:
120%
The hardness of the deposit depending on the relevant welding conditions and the chemical composition of the base metal.
approximate data
REF. E 774- A / MS
Date: 2012-01-09
L5
Classification:
EN 14 700: DIN 8555: E Fe 16 E 10-UM-65-GR
d.o.o.
ABRADUR 66
Base materials:
Heat treatment:
Preheating is not required.
Coating type:
Basic
Welding current:
AC DC +
Nb 6.0
W 2.0
V 1.0
Welding positions:
Mechanical properties:
Hardness:
62-67 HRC
Redrying temperature:
300C / 2h
Metal recovery:
235%
The hardness of the deposit depending on the relevant welding conditions and the chemical composition of the base metal.
approximate data
REF. E 777- A / MS
Date: 2012-01-09
L6
Classification:
EN 14 700: DIN 8555: E Fe 16 E 10-UM-60-C
d.o.o.
CrWC 600
Base materials:
Steels Cast steel Austenitic manganese steels
Heat treatment:
Preheating is not required.
Coating type:
Basic
Welding current:
AC DC +
W 4.5
Welding positions:
Hardness:
57-62 HRC
typical: 60 HRC
Redrying temperature:
300C / 2h
The hardness of the deposit depending on the relevant welding conditions and the chemical composition of the base metal.
approximate data
REF. E 780- A / SP
Date: 2005-07-08
L7
MANGANESE ALLOYED
d.o.o.
HARDFACING ELECTRODES
E Mn 14 ... M1 E Mn 14 Cr 4 .. M2 E Mn 17 Cr 13 .... M3 E Mn 17 Cr 10 Nb 3 .. M4
Classification:
EN 14 700: E Fe 9 DIN 8555: E 7-UM-200-KP
d.o.o.
E Mn14
Base materials:
Welding current:
AC DC +
Mo 0.7
Welding positions:
Mechanical properties:
Hardness:
Redrying temperature:
300C / 2h Wear coeff.:
Metal recovery:
110%
The hardness of the deposit depending on the relevant welding conditions and the chemical composition of the base metal.
approximate data
REF. E 840- A / M
Date: 2012-01-09
M1
Classification:
EN 14 700: DIN 8555: AWS A-5.13: E Fe 9 E 7-UM-200-KP E Fe Mn-A
d.o.o.
E Mn14Cr4
Base materials:
Austenitic 14% Mn steel Low alloy steels All hard to-weld steels
Welding current:
AC DC +
Ni 3.7
Mo 0.7
Welding positions:
Mechanical properties:
Hardness:
Redrying temperature:
300C / 2h Wear coeff.:
Metal recovery:
120%
The hardness of the deposit depending on the relevant welding conditions and the chemical composition of the base metal.
approximate data
REF. E 842- A / MS
Date: 2012-01-09
M2
Classification:
EN 14 700: E Fe 9 DIN 8555 : E 7-UM-250KP AWS :
d.o.o.
E Mn17Cr13
Base materials:
Welding current:
AC DC +
Cr 13.5
Welding positions:
Mechanical properties:
Hardness:
Redrying temperature:
300C / 2h Wear coeff.:
Metal recovery:
140%
The hardness of the deposit depending on the relevant welding conditions and the chemical composition of the base metal.
approximate data
REF. E 841- A / M
Date: 2010-06-18
M3
Classification:
EN 14 700: E Fe 9 DIN : AWS :
d.o.o.
E Mn17Cr10Nb3
Base materials:
Austenitic 14% Mn steel Carbon steels Low alloy steels
Heat treatment:
For austenitic Mn steels preheating to 100C is recommended. No stress relieving is recommended for this type of metal. For carbon and low alloy steels preheating to 250C is recommended. When welding thick walled components stress relieving at 550 -- 650C is suggested, structure and mechanical properties remain the same.
Coating type:
Basic
Welding current:
AC DC +
Cr 9.7
Nb 2.3
Welding positions:
Mechanical properties:
Hardness:
Redrying temperature:
300C / 2h Wear coeff.:
Metal recovery:
140%
The hardness of the deposit depending on the relevant welding conditions and the chemical composition of the base metal.
approximate data
REF. E 844- A / SP
Date: 2005-07-08
M4
Notes:
DUROSTEL 1 E .. N1 DUROSTEL 1 P . N2 DUROSTEL 6 E . N3 DUROSTEL 6 P . N4 DUROSTEL 12 E ... N5 DUROSTEL 12 P N6 DUROSTEL 21 E ... N7 DUROSTEL 21 P .. N8 DUROSTEL F P N9
Classification:
DIN 8555: AWS A-5.13: E 20-UM-55-ZCT E CoCr-C
d.o.o.
DUROSTEL 1 E
Base materials:
Steels
Typical all weld metal properties: Coating type: Welding Current: AC DC+ Welding positions:
Chemical composition, wt %: C Cr W 2.5 30.0 12.5 Co rest
Mechanical properties:
Redrying tempetature:
300C/2h
Hardness :
approximate data
REF. E - A / MS
Date:2010-02-17
N1
Classification:
DIN 8555: G/WSG-20-GO-55-ZCT AWS A-5.13: R CoCr-C
d.o.o.
DUROSTEL 1 P
Base materials:
Steels
Mechanical properties:
Hardness :
approximate data
REF. E - A / MS
Date:2010-02-17
N2
Classification:
DIN 8555: AWS A-5.13: E 20-UM-40 ZCT E CoCr-A
d.o.o.
DUROSTEL 6 E
Base materials:
Steels Corrosion resisting steels Cast steels
Mechanical properties:
Redrying temperature:
300C/2h
Hardness :
approximate data
REF. E 930 - A / MS
Date:2010-02-17
N3
Classification:
DIN 8555: G/WSG-20-GO-45-ZCT AWS A-5.13: R CoCr-A
d.o.o.
DUROSTEL 6 P
Base materials:
Steels Corrosion resisting steels Cast steels
Mechanical properties:
Hardness :
approximate data
REF. E - A / MS
Date:2010-02-17
N4
Classification:
DIN 8555: AWS A-5.13: E 20-UM-50-ZCT E CoCr-B
d.o.o.
DUROSTEL 12 E
Base materials:
Steels Corrosion resisting steels Cast steels
Typical all weld metal properties: Coating type: Welding current: AC DC+ Welding positions:
Chemical composition, wt %: C Cr W 1.5 30.0 8.0 Co rest
Mechanical properties:
Redrying temperature:
300C/2h
Hardness :
approximate data
REF. E - A / MS
Date:2010-02-17
N5
Classification:
DIN 8555: G/WSG-20-GO-50-ZCT AWS A-5.13: R CoCr-B
d.o.o.
DUROSTEL 12 P
Base materials:
Steels Corrosion resisting steels Cast steels
Mechanical properties:
Hardness :
approximate data
REF. E - A / M
Date:2010-02-17
N6
Classification:
DIN 8555: E 20-UM-300-CKZT
d.o.o.
DUROSTEL 21E
Base materials:
Steels Corrosion resisting steels Cast steels
Typical all weld metal properties: Coating type: Welding Current: AC DC+ Welding positions:
Chemical composition, wt %: C Cr Mo Ni 0.25 28.0 5.0 2.8 Co rest
Mechanical properties:
Redrying temperature:
300C/2h
Hardness :
approximate data
REF. E - A / MS
Date:2010-02-17
N7
Classification:
DIN 8555: G/WSG-20-GO-300-CKZT
d.o.o.
DUROSTEL 21P
Base materials:
Steels Corrosion resisting steels Cast steels
Mechanical properties:
Hardness :
approximate data
REF. E - A / MS
Date:2010-02-17
N8
Classification:
DIN 8555: G/WSG-20-GO-40-ZCT
d.o.o.
DUROSTEL FP
Base materials:
Steels Corrosion resisting steels Cast steels
Mechanical properties:
Hardness :
42 HRC
approximate data
REF. E - A / MS
Date:2010-02-17
N9
d.o.o.
MONEL ... O1 MONEL C .. O2 SUPER Ni ... O3 CAST Ni .. O4 CAST Ni C O5 CAST NiFe . O6 CAST NiFe C ... O7 CAST NiFe B . O8 CAST NiFe BC ... O9 CAST NiFe10 .. O10 CAST Fe . O11 SL 250 O12
Classification:
DIN 8573: E NiCu BG 12 AWS A-5.15: E NiCu-B EN ISO 1071: EC NiCu-1
d.o.o.
MONEL
Base materials:
Grey cast iron Cast iron
Heat treatment:
For thick walled components slightly preheating is recommended.
Welding positions:
Redrying temperature:
200C/1h Hardness: 160 HB
Approvals:
approximate data
REF. E860- A / MS
Date:2010-02-14
O1
Classification:
DIN 8573: E NiCu G13 AWS A-5.15: E NiCu-B EN ISO 1071: EC NiCu-1
d.o.o.
MONEL C
Base materials:
Grey cast iron Cast iron
Heat treatment:
For thick walled components slightly preheating is recommended.
Welding positions:
Redrying temperature:
200C/1h Hardness: 160 HB
Approvals:
approximate data
REF. E859- A / MS
Date:2012-01-09
O2
Classification:
DIN 8573: AWS A-5.15: EN ISO 1071: E Ni BG 12 E Ni-Cl EC Ni-Cl-1
d.o.o.
SUPER Ni
Base materials:
Grey cast iron Malleable cast iron
Heat treatment:
For thick walled components slightly preheating to is recommended.
Coating type:
Basic
Welding current:
AC DC -
Welding positions:
Mechanical properties:
Tensile strength
Rm:
300
MPa (N/mm )
Redrying temperature:
200C/1h Hardness: 160 HB
Approvals:
approximate data
REF. E861- A / SM
Date:2010-02-14
O3
Classification:
DIN 8573: AWS A-5.15: EN ISO 1071: E Ni BG 12 E Ni-Cl EC Ni Cl-1
d.o.o.
CAST Ni
Base materials:
Grey cast iron
Heat treatment:
For thick walled components slightly preheating is recommended.
Coating type:
Basic
Welding current:
AC DC -
Welding positions:
Mechanical properties:
Redrying temperature:
200C/1h
Tensile strength
Rm:
300
MPa (N/mm )
Hardness:
160 -175
HB
Approvals:
approximate data
REF. E 865 - A / SM
Date:2012-01-09
O4
Classification:
DIN 8573: AWS A-5.15: EN ISO 1071: E Ni BG 13 E Ni-Cl EC Ni Cl-1
d.o.o.
CAST Ni C
Base materials:
Grey cast iron
Heat treatment:
For thick walled components slightly preheating is recommended.
Coating type:
Basic
Welding current:
AC DC +
Welding positions:
Mechanical properties:
Redrying temperature:
200C/1h
Tensile strength
Rm:
300
MPa (N/mm )
Hardness:
160
HB
Approvals:
approximate data
REF. E 880- A / SM
Date:2010-06-23
O5
Classification:
DIN 8573: AWS A-5.15: EN ISO 1071: E NiFe BG 12 E NiFe-Cl ECNiFe -Cl-1
d.o.o.
CAST Ni Fe
Base materials:
Grey cast iron Malleable cast iron Nodular cast iron Steel / grey cast iron
Heat treatment:
For thick walled components slightly preheating is recommended.
Coating type:
Basic
Welding current:
AC DC -
Welding positions:
Mechanical properties:
Tensile strength
Rm:
450
MPa (N/mm )
Redrying temperature:
200C/1h Hardness: 190 HB
Approvals:
approximate data
REF. E871 - A / SM
Date:2012-01-09
O6
Classification:
DIN 8573: AWS A-5.15: EN ISO 1071: E NiFe BG13 E NiFe-Cl EC NiFe-Cl- 1
d.o.o.
CAST Ni Fe C
Base materials:
Grey cast iron Malleable cast iron Nodular cast iron Steel / grey cast iron
Heat treatment:
For thick walled components slightly preheating is recommended.
Coating type:
Basic
Welding current:
AC DC +
Welding positions:
Mechanical properties:
Tensile strength
Rm:
450
MPa (N/mm )
Redrying temperature:
200C/1h Hardness: 190 HB
Approvals:
approximate data
REF. E882- A / MS
Date:2012-01-08
O7
Classification:
DIN 8573: E NiFe B G12 AWS A 5.15: E Ni Fe-Cl EN ISO 1071: EC NiFe-Cl-1
d.o.o.
CAST Ni Fe B
Base materials:
Grey cast iron Malleable cast iron Nodular cast iron
Coating type:
Basic
Welding current:
AC DC -
Welding positions:
Mechanical properties: Tensile strength Hardness: Rm: 450 180 MPa (N/mm ) HB
2
Redrying temperature:
180C
Approvals:
2.5 3.25 4
approximate data
REF. E 873 - A / SM
Date:2012-01-09
O8
Classification:
DIN 8573: E NiFe BG13 AWS A-5.15: E NiFeCl ISO 1071: E NiFe BG2
d.o.o.
CAST Ni FeB C
Base materials:
Grey cast iron Malleable cast iron Nodular cast iron Steel / grey cast iron
Heat treatment:
For thick walled components slightly preheating is recommended.
Coating type:
Basic
Welding current:
AC DC +
Welding positions:
Mechanical properties:
Tensile strength
Rm:
450
N/mm2
Redrying temperature:
200C/1h Hardness: 190 HB
Approvals:
approximate data
REF.E A/SM
Date:2.4.2012
O9
Classification:
DIN 8573: AWS A-5.15: E Ni BG 12 E NiFe BG12 E Ni-Cl E NiFe-Cl
d.o.o.
CAST Ni Fe10
Base materials:
Grey cast iron Steel / grey cast iron
Heat treatment:
For thick walled components slightly preheating is recommended.
Coating type:
Basic
Welding current:
AC DC -
Welding positions:
Mechanical properties:
Tensile strength
Rm:
cca.
Redrying temperature:
200C/1h Hardness: cca. 180 HB
Approvals:
approximate data
REF. E868 - A / SM
Date:2012-01-09
O10
Classification:
DIN 8573: AWS A-5.15: EN ISO 1071:
E Fe-1 S21 E St EC St 1
d.o.o.
CAST Fe
Base materials:
Grey cast iron Malleable cast iron Nodular cast iron Steel / grey cast iron
Heat treatment:
For thick walled components slightly preheating is recommended.
Coating type:
Basic
Welding current:
AC DC +
Welding positions:
Mechanical properties:
Hardness:
160 - 200 HB
Redrying temperature:
180C/1h
Approvals:
approximate data
REF. E 885 - A / M
Date:2010-06-23
O11
Classification:
DIN 8573: E (FeC-2) BG 49 EN ISO 1071: EC FeC-2-7
d.o.o.
SL 250
Base materials:
Grey cast iron
Heat treatment:
Plates should be preheated to 600C.
Welding positions:
Redrying temperature:
350C / 2h
max.250 HB
Metal recovery:
200-210%
Approvals:
approximate data
REF. E 891 - A / SM
Date:2010-02-14
O12
Notes:
BRON CuSn . P1 BRON CuAl .. P2 BRON CuMn P3 EL Cu .. P4 ALU 99.5 ... P5 ALU Mn . P6 ALU 5 Si P7 ALU 12 Si .. P8
Classification:
EN DIN 1733: AWS A-5.6: EN ISO 1071: W.Nr.: E CuSn-7 ECuSn-A E CuSn 2 B 2 2.1025
d.o.o.
BRON CuSn
Base materials:
Bronze: Copper Grey cast iron CuSn2 CuSn6 G-CuSn10 W.-Nr. 2.1010 2.1020, 2.1030
Heat treatment:
Bigger plates should be preheated to 200-400C. Bronze castings must be cooled slowly.
Welding positions:
Tensile strength
Rm:
Redrying temperature:
300C / 2h
Hardness:
Approvals:
approximate data
REF. E 900 - A / SP
Date:2005-07-08
P1
Classification:
EN DIN 1734: AWS A-5.6: EN ISO 1071: W.Nr.: E CuAl-8 E CuAl-A2 E CuAl 2 B2 2.0326
d.o.o.
BRON CuAl
Base materials:
Al-bronze Copper
Heat treatment:
Preheating from 200 till 350C is recommended .
Welding positions:
Tensile strength
Rm:
480
Redrying temperature:
300C / 2h Hardness: 140 - 160 HB
Approvals:
approximate data
REF. E 910 - A / SP
Date:2005-07-08
P2
Classification:
DIN 1733: DIN 8555: AWSA-5.6: EN ISO 1071: W.Nr.: ES-CuMn13Al E 31 200 cn E CuMnNiAl E CuAlMn 2 B2 2.1368
d.o.o.
BRON CuMn
Base materials:
Copper alloys with Mn, Ni and Al Grey cast iron Low alloyed steels
Heat treatment:
Bigger plates should be preheated to 200C.
Welding positions:
Mechanical properties:
2
Tensile strength
MPa(N/mm )
Redrying temperature:
300C / 2h
Hardness:
Approvals:
approximate data
REF. E 911 - A / SP
Date:2005-07-08
P3
Classification:
EN DIN 1733: AWS A-5.6: W.Nr.: E CuMn2 E Cu 2.1363
d.o.o.
EL Cu
Base materials :
Copper: Copper alloys Grey cast iron WNr 2.0040; 2.0070; 2.0076; 2.0090
Heat treatment:
Bigger plates should be preheated to 400-600C, after welding easy cooling is recommended.
Welding positions:
Mechanical properties: Tensile strength Elongation Hardness Rm: A5: cca 200 cca 28 cca 100 MPa(N/mm ) % HB
2
Redrying temperature:
300C / 2h
mm
Welding parameters Length Current mm A 300 350 350 350 40-70 80-120 120-150 130-190
Approvals :
/
* approximate data
REF. E 850 - A / MS
Date:2012-01-09
P4
Classification:
DIN1732: AWS-5.3: W.Nr.: EL-Al 99,5 E 1100 3.0259
d.o.o.
ALU 99,5
Base materials:
Aluminium and its alloys Al 99,5 Al 99
Heat treatment:
To obtain welds without pore formation, plates with thickness above 5 mm should be preheated to 200 - 250C.
Welding positions:
Mechanical properties:
ReL / Rp 0.2:
Rm A5:
Redrying temperature:
100 150C / 1 - 2h Elongation
Approvals:
2.5 3.25 4
approximate data
REF. E
- A / SP
Date:2005-07-14
P5
Classification:
DIN1732: AWS-5.3: W.Nr.: EL-AlMn 1 E 3003 3.5016
d.o.o.
ALU Mn
Base materials:
Aluminium alloys with Mn and Mg: AlMn0,6, AlMn1, AlMnCu AlMgMn, AlMg1, AlMg3, AlMg5
Heat treatment:
To obtain welds without pore formation, plates with thickness above 5 mm should be preheated to 200 - 250C.
Welding positions:
ReL / Rp 0.2:
Rm: A5:
>
40
MPa(N/mm ) MPa(N/mm ) %
2
Redrying temperature:
100-150C/12h
Elongation
Approvals:
2.5 3.25 4 5
approximate data
REF. E
- A / M
Date:2010-06-18
P6
Classification:
DIN1732: AWS-5.3: W.Nr.: EL-AlSi-5 E 4042 3.2245
d.o.o.
ALU 5 Si
Base materials:
Aluminium Aluminium alloys with < 2% alloying elements Al-alloy castings <7% Al Si 5, AlMgSi0.5, AlMgSi0.8, AlMgSi1, AlMg1SiCu, AlCuMg
Heat treatment:
To obtain welds without pore formation, plates with thickness above 5 mm should be preheated to 200 - 250C.
Welding positions:
Mechanical properties:
2
ReL / Rp 0.2:
Rm: A5
> 70
MPa(N/mm )
2
Redrying temperature:
100 150 C / 1 - 2h
Elongation
Approvals:
2.5 3.25 4
approximate data
REF. E
- A / SP
Date:2005-07-14
P7
Classification:
DIN1732: AWS-5.3 W.Nr.: EL-AlSi 12 3.2285
d.o.o.
ALU 12 Si
Base materials:
Aluminium alloys G-AlSi12, G-AlSi12(Cu), G-AlSi11 G-AlSi8Cu3, G-AlMg3Si
Heat treatment:
To obtain welds without pore formation, plates with thickness above 5 mm should be preheated to 200 - 250C.
Welding positions:
Mechanical properties:
2
ReL / Rp 0.2:
Rm: A5
cca. 80
MPa(N/mm )
2
Redrying temperature:
100 150 C / 1 - 2h
Elongation
Approvals:
2.5 3.25 4
approximate data
REF. E
A / SP
Date:2005-07-08
P8
Notes:
ELECTRODES FOR
d.o.o.
Classification:
d.o.o.
SEKATOR 1
Base materials:
Cast iron Copper Copper alloys Aluminium Steels
Coating type:
acid
Welding current:
AC DC -
Welding positions:
approximate data
REF. E 173 - A / M
Date:2012-01-09
Q1
Classification:
d.o.o.
SEKATOR 2A
Base materials:
Cast iron Copper Copper alloys Aluminium Aluminium alloys Steels
Coating type:
acid
Welding current:
AC DC -
Welding positions:
approximate data
REF. E 018 - A / MS
Date:2012-01-09
Q2
Classification:
d.o.o.
SEKATOR 2B
Base materials:
Cast iron Copper Copper alloys Aluminium Aluminium alloys Steels
Coating type:
acid
Welding current:
AC DC -
Welding positions:
approximate data
REF. E 016 - A / MS
Date:2012-01-09
Q3
Classification :
d.o.o.
TERMO
Base materials:
steels cast iron copper copper alloys aluminium aluminium alloys
Coating type :
special
Welding current :
AC DC +/ -
Welding positions :
* approximate data
REF. E 020- A / M
Datum:2005-07-08
Q4
Notes:
d.o.o.
AR 18.5 R1 AR D1 .. R2 AR 18.1 R3 AB 100 . R4 FB TT .. R5 FB 12.2 R6 FB CrNi R7 CS Cr 6 R8 CS CrNi ... R9 AB Cr R10 CS 350 . R11 FB 33 . R12 AB 123 ... R13 MS 200.R14
Classification:
ISO 14174 ISO 14171-A ISO 14171-A ISO 14171-A ISO 14171-A SA AR 1 88 AC S 42 0 AR S2 S 46 0 AR S2Mo S 3T 0 AR S2 S 4T 0 AR S2Mo F7A0-EM12K F7A0-EA2-A2
d.o.o.
AR 18.5
BASE MATERIALS DIN General structural St37-2 to RSt37-2 steel St44-2, St44-3 St52-3 Pipe steel StE210.7 to StE290.7, StE320.7, StE360.7 St35 to St45.8 St52, St52-4 Boiler steel HI, HII, 17Mn4, 19Mn5 15Mo3 Shipbuilding steel A,B,D Fine-grain steel StE255 to StE355
W.Nr. 1.0037 to 1.0038 1.0044, 1.0144 1.0570 1.0307 to 1.0484 1.0409, 1.0582 1.0308 to 1.0405 1.0580, 1.0581 1.0345, 1.0426 1.0481,1.0482 1.5415 1.0440, 1.0472, 1.0461, 1.0562,
Al2O3 + MnO 55 %
Typical all weld metal properties: Chemical analysis (wt%) Wire EPP 2 EPP 2 Mo
C 0.06 0.06
Si 0.60 0.60
Mn 1.45 1.45
Mo / 0.50
Mechanical properties Wire ReL / Rp 0.2 MPa 2 (N/mm ) EPP 2 >420 EPP 2 Mo >440
Welding current: AC, DC+ ; up to 1000 A Redrying temperature: 350C / 2 h Packing: plastic bags, contents 25 kg
REF. A / CJ
Date: 2012-03-07
R1
Classification:
ISO 14174 ISO 14171-A ISO 14171-A ISO 14171-A ISO 14171-A SA AR 1 97 AC S 42 0 AR S2 S 46 0 AR S2Mo S 3T 0 AR S2 S 4T 0 AR S2Mo F7A0-EM12K F7A0-EA2-A2
d.o.o.
AR D1
BASE MATERIALS DIN General structural St37-2 to RSt37-2 steel St44-2, St44-3, St52-3 Pipe steel StE210.7 to StE290.7, StE320.7, StE360.7 St35 to St45.8 St52, St52-4 Boiler steel HI, HII, 17Mn4, 19Mn5 15Mo3 Shipbuilding steel A,B,D Fine-grain steel StE255 to StE355
W.Nr. 1.0037 to 1.0038 1.0044, 1.0144 1.0570 1.0307 to 1.0484 1.0409, 1.0582 1.0308 to 1.0405 1.0580, 1.0581 1.0345, 1.0426 1.0481,1.0482 1.5415 1.0440, 1.0472, 1.0461, 1.0562,
Al2O3 + MnO 55 %
Typical all weld metal properties: Chemical analysis (wt%) Wire C EPP 2 0.06 EPP 2 Mo 0.06
Si 0.60 0.60
Mn 1.35 1.35
Mo / 0.50
Mechanical properties Wire ReL / Rp 0.2 2 MPa(N/mm ) EPP 2 >400 EPP 2 Mo >450
Welding current: AC, DC+ ; up to 1000 A Redrying temperature: 350C / 2 h Packing: plastic bags, contents 25 kg Approvals:
Wire EPP 2 CRS 1YTM ABS 2YTM BV A2YTM GL 1YTM LR 1YTM DNV IIYTM S *
TV *
DB *
REF. A / CJ
Date: 2012-03-07
R2
Classification:
ISO 14174 ISO 14171-A ISO 14171-A ISO 14171-A ISO 14171-A SA AR 1 88 AC H5 S 42 0 AR S2 S 46 0 AR S2Mo S 3T 0 AR S2 S 4T 0 AR S2Mo F7A2-EM12K F8A2-EA2-A2
d.o.o.
AR 18.1
Al2O3 + MnO 55 %
Typical all weld metal properties: Chemical analysis (wt%) Wire C EPP 2 0.06 EPP 2 Mo 0.06
Si 0.70 0.70
Mn 1.4 1.4
Mo / 0.50
Mechanical properties Wire ReL / Rp 0.2 2 MPa(N/mm ) EPP 2 >450 EPP 2 Mo >490 Welding current: AC, DC+ ; up to 1000 A Redrying temperature: 350C / 2 h Packing: plastic bags, contents 25 kg Approvals:
Wire EPP 2 CRS 2YTM ABS 2YTM
BV A2YTM
GL 2YTM
LR 2TM,2YTM
DNV IIYTM
S *
REF. A / CJ
Date: 2012-03-07
R3
Classification:
ISO 14174 ISO 14171-A ISO 14171-A ISO 14171-A ISO 14171-A ISO 14171-A SA AB 1 76 AC S 42 0 AB S2 S 46 0 AB S3 S 46 0 AB S2Mo S 2T 0 AB S2 S 3T 0 AB S3 F6A2-EM12K F7A4-EM13K F7A4-EA2-A2
d.o.o.
AB 100
Chemical composition of flux SiO2 + TiO2 CaO + MgO 25 % 20 % Typical all weld metal properties: Chemical analysis (wt%) Wire C EPP 2 0.06 EPP 2 Mo 0.06 EPP 3 0.06 Mechanical properties Wire ReL / Rp 0.2 2 MPa(N/mm ) EPP 2 >380 EPP 2 Mo >430 EPP 3 >400
Mo / 0.50 /
Welding current: AC, DC+ ; up to 1000 A Redrying temperature: 350C / 2 h Packing: plastic bags, contents 25 kg Approvals:
Wire EPP 2 EPP 3 CRS 2TM 2YTM ABS 2TM 2YTM BV A2TM A2YTM GL 2TM 2YTM LR 2TM 2M, 2YM DNV IITM IIYTM S * *
REF. A / CJ
Date: 2012-03-07
R4
Classification:
ISO 14174 ISO 14171-A ISO 14171-A ISO 14171-A ASME/AWS A5.17 A5.17 A5.23 SA FB 1 55 AC H5 S 35 4 FB S2 S 42 5 FB S3 S 50 4 FB S2Mo F6A4-EM12K F7A6-EM13K F8A6-EA2-A2
d.o.o.
FB TT
Its suitable for welding in combination with flux-cored wires (f. e. fine-grain steels.) Chemical composition of flux SiO2 + TiO2 15 % Typical all weld metal properties: Chemical analysis (wt%) WIRE C EPP 2 0,06 EPP 3 0,06 EPP 2 Mo 0,06 Basicity index (Boniszewski): 3.1 Al2O3 + MnO CaF2 20 % 25%
CaO + MgO 40 %
Mo
Ni
0.50
Mechanical properties WIRE ReL / Rp EPP 2 EPP 3 EPP 2 Mo >330 >430 >500
0.2
MPa(N/mm )
450 - 550 530 630 580 680 >28 >22 >20
MPa(N/mm )
Welding current: AC, DC+ up to 1000 A Redrying temperature: 350C / 2 h Packing: plastic bags, contents 25 kg
Approvals: WIRE EPP 2 EPP 3 EPP2Mo CRS 3M 3YM 3YM ABS 3M 3YM 3YM BV A3M A3YM A3YM GL 3M 3YM 3YM LR 3M 3M,3YM DNV IIIM IIIYM IIIYM S * * * DB * * TV * * * RS
3YM
REF. A / CJ
Date: 2012-03-07
R5
Classification:
ISO 14174 ISO 14171-A ISO 14171-A ISO 14171-A ISO 14171-A SA FB 1 65 AC H5 S 35 2 FB S2 S 42 4 FB S3 S 46 2 FB S2Mo S 3T 0 FB S3 F6A4-EM12K F7A6-EM13K F7A4-EA2-A2
d.o.o.
FB 12.2
Typical all weld metal properties: Chemical analysis (wt%) WIRE C Si EPP 2 0,06 0.25 EPP 2 Mo 0,06 0.25 EPP 3 0,06 0.25 Mechanical properties 2 WIRE ReL / Rp 0.2 Rm MPa(N/mm ) A5 (%) 2 MPa(N/mm ) EPP 2 >360 510 600 >24 EPP2Mo EPP 3 >430 >400 550 650 530 630 >20 >24
Mn 1,10 1,10 1,50 20 >150 >90 >160 0 >110 >90 >130 -20 >90 >70 >100
Welding current: AC, DC+, up to 1000 A Redrying temperature: 350C / 2 h Packing: plastic bags, contents 25 kg Approvals:
WIRE EPP2 EPP 3 ABS 2YT,3YM BV A3YM GL 3YM LR 3M,3YM DNV IIYT,IIIYM S *
TV *
REF. A / CJ
Date: 2012-03-07
R6
Classification:
ISO 14174 SA FB 2 5635 DC
d.o.o.
FB CrNi
Chemical composition of flux SiO2 + TiO2 CaO + MgO 30 % 30 % Typical all weld metal properties: Chemical analysis (wt%) WIRE C EPP 19/9 NC < 0.03 EPP 19/9 Nb 0.07 EPP 19/12/3 NC < 0.03 EPP 19/12/3 Nb 0.07 Mechanical properties WIRE ReL / Rp 0.2 2 MPa(N/mm ) EPP 19/9 NC > 320 EPP 19/9 Nb > 350 EPP 19/12/3 NC > 320 EPP 19/12/3 Nb > 350 Welding current: Redrying temperature: DC+, up to 800 A 350C / 2 h
Cr 18 18 18 18
Ni 9 9 10 10
Mo
Nb > 8 xC
2.5 2.5
> 8 xC
REF.A / CJ
Date: 2012-03-07
R7
Classification:
ISO 14174 SA CS 1 96 AC
d.o.o.
CS Cr 6
REF. A / CJ
Date: 2012-03-07
R8
Classification:
ISO 14174 SA CS 2 4994 AC
d.o.o.
CS CrNi
Typical all weld metal properties: Chemical analysis (wt%) WIRE C EPP 19/9 NC < 0.03 EPP 19/9 Nb 0.07 EPP 19/12/3 NC < 0.03 EPP 19/12/3 Nb 0.07 Mechanical properties WIRE ReL / Rp 0.2 % 2 MPa(N/mm ) EPP 19/9 NC > 320 EPP 19/9 Nb > 350 EPP 19/12/3 NC > 320 EPP 19/12/3 Nb > 350 Welding current: Redrying temperature:
Cr 18 18 18 18
Ni 9 9 10 10
Mo
Nb > 8 xC
2.5 2.5
> 8 xC
REF. A / CJ
Date: 2012-03-07
R9
Classification:
ISO 14174 SA AB 2B 5654 AC
d.o.o.
AB Cr
Chemical analysis (wt%) and hardness Strip / wire C Si Mn INOX TR 19/9 0.08 0.70 1.10 INOX TR Cr 17 0.07 0.90 0.70 EPP 2 0.05 0.50 0.90 With strips: two layers; with EPP 2 according to DIN 8555.
Cr 17.5 16.5 -
Ni 6.0 -
Welding current:
Redrying temperature:
REF. A / CJ
Date: 2012-03-07
R 10
Classification:
ISO 14174 SA CS 3 C 0,2 Cr3 AC
d.o.o.
CS 350
Chemical analysis (wt%) and hardness (according to DIN 8555) Wire C Si Mn Cr EPP 1 0.25 0.50 1.70 3.0 EPP 2 0.25 0.90 2.00 3.0 Welding current: AC, DC+ ; up to 800 A 350C / 2 h
Mo 0.40 0.40
Redrying temperature:
REF. A / CJ
Date: 2012-03-07
R 11
Classification:
ISO 14174 SA FB 2 5635 DC
d.o.o.
FB 33
Chemical composition of flux SiO2 + TiO2 10 % Tipical all weld metal properties: Chemical analysis (%): ica C EPP 19/9 NC < 0.03 EPP 19/9 Nb 0.07 EPP 19/12/3 NC < 0.03 EPP 19/12/3 Nb 0.07 Mechanical properties: Wire ReL / Rp 0.2 2 MPa(N/mm ) EPP 19/9 NC > 320 EPP 19/9 Nb > 350 EPP 19/12/3 NC > 320 EPP 19/12/3 Nb > 350 Welding current: Redrying temperature:
Al2O3 + MnO 35 %
Cr 18 18 18 18
Ni 9 9 10 10
Mo
Nb > 8 xC
2.5 2.5
> 8 xC
TV *
REF. A / CJ
Date: 2012-03-07
R 12
Classification:
ISO 14174 ISO 14171-A ISO 14171-A ISO 14171-A ISO 14171-A ISO 14171-A SA AB 1 67 AC H5 S 38 4 AB S2 S 42 4 AB S3 S 42 4 AB S2Mo S 3T 2 AB S2 S 3T 2 AB S3 F6A4-EM12K F7A4-EM13K F7A4-EA2-A2
d.o.o.
AB 123
Boiler steel
Chemical composition of flux SiO2 + TiO2 CaO + MgO 20 % 30 % Typical all weld metal properties: Chemical analysis (wt%) Wire C EPP 2 0,06 EPP 3 0,06 EPP 2 Mo 0,06 Mechanical properties Wire EPP 2 EPP 3 EPP 2 Mo
Cr /
Ni
Mo / 0,50
Ni
Mo 0,90
1,50
0,90 0,50
Welding current: AC, DC+ ; up to 1000 A Redrying temperature: 350C / 2 h Packing: paper bags with PVC inserted sack, content 25 kg
REF. A / CJ
Date: 2012-03-10
R 13
Classification:
ISO 14174 ISO 14171-A ASME/AWS A5.17 SA MS 1 88 AC S 38 2 MS S2 F7A2-EM12K
d.o.o.
MS 200
BASE MATERIALS DIN General structural St37-2 do RSt37-2 steel St44-2, St44-3, St52-3 Pipe steel StE210.7 do StE290.7, StE320.7, StE360.7 St35 do St45.8 St52, St52-4 Boiler steel HI, HII, 17Mn4, 19Mn5 15Mo3 Shipbuilding steel A,B,D Fine-grain steel StE255 do StE355
W.Nr. 1.0037 do 1.0038 1.0044, 1.0144 1.0570 1.0307 do 1.0484 1.0409, 1.0582 1.0308 do 1.0405 1.0580, 1.0581 1.0345, 1.0426 1.0481,1.0482 1.5415 1.0440, 1.0472, 1.0461, 1.0562,
Typical all weld metal properties: Chemical analysis (wt%) Wire C EPP 2 0,06
Si 0,60
Mn 1,4
P < 0,03
S < 0,025
A5(%) > 22
Welding current: AC, DC+ ; up to 900 A Redrying temperature: 350C / 2 h Packing: paper bags with PVC inserted sack, content 25 kg
REF. A / CJ
Date: 2012-03-10
R 14
Notes:
WELDING RODS FOR TIG WELDING WELDING WIRES FOR MAG(CO2) WELDING WELDING WIRES FOR GMA WELDING
d.o.o.
TIG / MAG WELDING: TIG VAC 60 / VAC 60 ... S4 TIG VAC 65 / VAC 65 ... S5 VAC 60 Ni .. S6 VAC 60 Ti S7 VAC 60 CuNi . S8
TIG / MIG WELDING: TIG Mo TIG CrMo / MIG Mo ...................... S1 / MIG CrMo S2
TIG 19/12/3 NC Si / MIG 19/12/3 NC Si .... S16 TIG 25/14 NC Si / TIG 18/8/6 Si / TIG 25/20 / TIG 29/9 / TIG 70/15 / TIG 22/9/3 LN / TIG 625 / MIG 25/14 NC Si ... S17 MIG 18/8/6 Si .. S18 MIG 25/20 S19 MIG 29/9 .. S20 MIG 70/15... S21 MIG 22/9/3 LN ..... S22 MIG 625 ..... S23
WELDING RODS FOR TIG WELDING WELDING WIRES FOR MAG(CO2) WELDING WELDING WIRES FOR GMA WELDING
d.o.o.
TIG Cu
/ MIG Cu . S24
TIG CuAl8 / MIG CuAl8 .. S25 TIG CuSn6 / MIG CuSn6 S26 TIG CuAg / MIG CuAg S27 TIG CuMn / MIG CuMn .. S28 TIG CuSi3 / MIG CuSi3 .. S29
Classification:
EN 1668 EN 12070 W 2Mo W Mo Si G Mo Si SG Mo ER 70 S-A1 G2 Mo 1.5424 W 46 2 W2Mo W 55 2 W2M3 W MoSi G MoSi W 1M3 G 1M3
d.o.o.
TIG Mo MIG Mo
DIN 8575 AWS A5.28: EN 440 W. Nr. EN ISO 636-A EN ISO 636-B EN ISO 21952-A EN ISO 21952-A EN ISO 21952-B EN ISO 21952-B
W.n.
1.0038 - 1.0570 1.0305, 1.0405, 1.5415 1.0345 - 1.0435, 1.0481
Mechanical properties
ReL / Rp 0.2 MPa(N/mm ) >480
2
A5 (%) > 22
KV -20C(J) >47
1,6; 0,8 ;
2,0; 1,0;
( mm ) ( mm )
lenght:: 1000 mm
Form of delivery:
Welding wires are spooled in accordance with AWS A5. 18 and EN ISO 544. Iron or plastic spools, normal or precision layer wound. Wire can be packed in drums 250kg or 350kg Welding rods are packed in paper carton, weight 25 kg.
Approvals:
TV, DB, CR, BV, DNV, LR, RINA, S (for TIG Mo) TV, DB, (for MIG Mo)
REF. A / CJ
Date: 2012-03-07
S1
Classification:
EN 12070: DIN 8575 AWS A5.28: W.Nr. EN ISO 21952-A EN ISO 21952-B W CrMo1Si G CrMo1Si SG CrMo1 ER 80 S-G 1.7339 W CrMo1Si G CrMo1Si W 1CM3
d.o.o.
Mechanical properties
ReL / Rp 0.2 MPa(N/mm ) Rm MPa(N/mm ) A5 (%) > 305 > 450 > 22 Stress-releaving: 720C / 30 min, cooled in oven to 300, then air
2 2
2,0; 1,0;
2,4; 1,2 ;
3,0; 1,6
( mm ) ( mm )
lenght:: 1000 mm
Form of delivery:
Welding wires are spooled in accordance with AWS A5. 18 and EN ISO 544. Iron or plastic spools, normal or precision layer wound. Wire can be packed in drums 250kg or 350kg Welding rods are packed in paper carton, weight 25 kg.
Approvals:
REF. A / CJ
Date: 2012-03-08
S2
Classification:
EN 12070 DIN 8575 AWS A5.28: W.Nr EN ISO 21952-A EN ISO 21952-B W CrMo2 Si G CrMo2 Si SG CrMo2 ER 90S-G 1.7384 W CrMo2Si G CrMo2Si W 2C1M3
d.o.o.
Mechanical properties
ReL / Rp 0.2 MPa(N/mm ) Rm MPa(N/mm ) A5 (%) > 355 > 540 > 22 Stress-releaving: 720C / 30 min, cooled in oven to 300, then air.
2 2
2,0; 1,0;
2,4; 1,2 ;
3,0; 1,6
( mm ) ( mm )
lenght:: 1000 mm
Form of delivery:
Welding wires are spooled in accordance with AWS A5. 18 and EN ISO 544. Iron or plastic spools, normal or precision layer wound. Wire can be packed in drums 250kg or 350kg Welding rods are packed in paper carton, weight 25 kg.
Approvals:
REF. A / CJ
Date: 2012-03-08
S3
Classification:
EN 440 EN 1668 DIN 8559 G 42 5 C/M G3Si1 W 42 5 W3Si1 SG 2 WSG 2 1.5125 ER 70 S-6 W 42 5 W3Si1 W 49 5 WE G42 5M/C G3Si1 G 49A 5 M/C G6
d.o.o.
W.Nr ASME/AWS SFA A5.18 EN ISO 636-A EN ISO 636-B EN ISO 14341-A EN ISO 14341-B
Base materials:
Unalloyed steel Fine-grained steel Boiler plate and vessel plate Pipe steel Shipbuilding steel Cast steel SIST EN S185 - E335 S235N - S355N P255NH - P355NH S420ML P235GH, P265GH P295GH, P355GH P235G1TH - P355T2 L210 - L360GA L240NB - L415NB S235JRS2-S235J4S S310G1S S355G2S GE200 GE260 DIN St 33 - St 60.2 St E 255 - St E 355 W St E 255 - W St E 355 TStE 420 TM H I, H II, 17Mn4, 19Mn5 St 35 - St 52.4 St E 210.7 StE290.7 StE415.7 GL-A, do GL-E GL-A32 do GL-D36 GS-38 do GS-52 W.Nr. 1.0035, 1.0060 1.0461, 1.0545 1.0462, 1.0565 1.8836 1.0345, 1.0425 1.0481, 1.0473 1.0308, 1.0581 1.0307, 1.0499 1.0484, 1.8972 1.0441, 1.0476 1.0513, 1.0585 1.0420, 1.0552
ReL / Rp 0.2:
Rm: A5: KV :
MPa(N/mm ) 2 MPa(N/mm )
% J ( -50C)
length: 1000 mm
Form of delivery:
Welding wires are spooled in accordance with AWS A5. 18 and EN ISO 544. Iron or plastic spools, normal or precision layer wound. Wire can be packed in drums 250kg, 350kg, 500 kg Welding rods are packed in paper carton, weight 25 kg. TV, DB, CR, ABS, BV, GL, LR, DNV, S, ( for VAC 60) TV , (for TIG VAC 60)
Approvals:
REF. W / CJ
Date: 2012-03-08
S4
Classification:
EN 440 EN1668 DIN 8559 G 46 4 C/M G4Si1 W 46 4 W4Si1 SG 3 W SG 3 1.5130 ER 70 S-6 W 46 4 W4Si1 W 55A 4 W6 G46 4M/C G4Si1 G 55A 4 M/C G6
d.o.o.
W.Nr ASME/AWS A - 5.18 EN ISO 636-A EN ISO 636-B EN ISO 14341-A* EN ISO 14341-B*
Base materials:
Unalloyed steel Fine-grained steel Boiler and vessel steel Pipe steel Shipbulding steel Cast steel SIST EN S185 - E335+CR S235N - S355N P255NH - P355NH P235GH, P265GH P295GH, P355GH P235G1TH - P355T2 L210 - L360GA L240NB - L415NB S235JRS2-S235J4S S310G1S S355G2S GE200 GE260 DIN St 33 - St 60.2 St E 255 - St E 355 W St E 255 - W St E 355 H I, H II, 17Mn4, 19Mn5 St 35 - St 52.4 St E 210.7 StE290.7 StE415.7 GL-A, do GL-E GL-A32 do GL-D36 GS-38 do GS-52 W.Nr. 1.0035, 1.0060 1.0461, 1.0545 1.0462, 1.0565 1.0345, 1.0425 1.0481, 1.0473 1.0308, 1.0581 1.0307, 1.0499 1.0484, 1.8972 1.0441, 1.0476 1.0513, 1.0585 1.0420, 1.0552
ReL / Rp 0.2:
Rm: A5: KV :
MPa(N/mm ) 2 MPa(N/mm )
% J ( -40C)
length: 1000 mm
Form of delivery:
Welding wires are spooled in accordance with AWS A5. 18 and EN ISO 544. Iron or plastic spools, normal or precision layer wound. Wire can bi packed in drums: 250 kg, 350 kg, 500 kg Welding rods are packed in paper carton, weight 25 kg. TV, DB, LR, GL ( for VAC 65)
Approvals:
REF. W / CJ
Date: 2012-03-08
S5
Classification:
EN 440 ASME/WS A5.28 EN ISO 14341-A* EN ISO 14341-B* G 50 4 C/M G 3Ni1 ER 80 S-Ni1 G 50 4M/C G3Ni1 G 57A 4 M/C GN2
d.o.o.
VAC 60 Ni
Base materials:
Description: Alloyed, for construction Special alloyed, for constructions Unalloyed Weatherproof steels DIN, AISI: St E 380 to St E 500 W St E 380 to W St E 500 T St E 380 to T St E 500 17Mn4, 19Mn5 (CORTEN, Patinax) EN: -
ReL / Rp 0.2:
Rm: A5: KV :
MPa(N/mm ) 2 MPa(N/mm )
% J ( -40C)
Approvals:
REF. W / B
Date: 2012-03-08
S6
Classification:
EN 440 W. Nr ASTM/AWS SFA 5.18 EN ISO 14341-A* EN ISO 14341-B* G 42 2 C/M G 3Si1+Ti 1.5125 ER 70 S-2 G 42 2 M/A/C G3Si1 G 49A 2 M/A/C G11
d.o.o.
VAC 60 Ti
Base materials:
Unalloyed steel Fine-grained steel Boiler and vessel steel Pipe steel Shipbulding steel Cast iron SIST EN S185 - E335 S235N - S355N P255NH - P355NH S420ML P235GH, P265GH P295GH, P355GH P235G1TH - P355T2 L210 - L360GA L240NB - L415NB S235JRS2-S235J4S S310G1S S355G2S GE200 GE260 DIN St 33 - St 60.2 St E 255 - St E 355 W St E 255 - W St E 355 TStE 420 TM H I, H II, 17Mn4, 19Mn5 St 35 - St 52.4 St E 210.7 StE290.7 StE415.7 GL-A, do GL-E GL-A32 do GL-D36 GS-38 do GS-52 W.Nr. 1.0035, 1.0060 1.0461, 1.0545 1.0462, 1.0565 1.8836 1.0345, 1.0425 1.0481, 1.0473 1.0308, 1.0581 1.0307, 1.0499 1.0484, 1.8972 1.0441, 1.0476 1.0513, 1.0585 1.0420, 1.0552
ReL / Rp 0.2:
Rm: A5: KV :
MPa(N/mm ) 2 MPa(N/mm )
% J ( -20C)
Form of delivery:
Wire electrodes are spooled in accordance with AWS A5. 18 and EN ISO 544. Iron or plastic spools, normal or precision layer wound. Wire can be packed in drums 250kg, 350kg, 500kg
Approvals:
TV, DB
REF. W / CJ
Date: 2012-03-08
S7
Classification:
EN 440 ASME/AWS A5.28 EN ISO 14341-A* EN ISO 14341-B* G 42 2 M/C G0 ER 80 S-G G 42 2 M/C GO G 49A 2 M/C GO
d.o.o.
VAC 60 CuNi
Base materials:
Special alloyed constructon steel SIST EN S235J0W S355J2W S355K2G1W S355J2WP S355J2G1W S235JRW S355J2G1W DIN WT St 37 WT St 52-3 S355J2WP (CORTEN A) WTSt355W2 (CORTEN B) WTSt27-2(A cor37) WTSt355W2 (A cor50) W. Nr. 1.8958 1.8963 1.8966 1.8946 1.8963 1.8960 1.8963
ReL / Rp 0.2:
Rm: A5: KV :
MPa(N/mm ) 2 MPa(N/mm )
% J ( -20C)
100% CO2, Ar + 18% CO2, CO2 + Ar + O2 (C1, M21, M22 - M33 ) 0,8 ; 1,0 ; 1,2 ; 1,6 ( mm )
Wire electrodes are spooled in accordance with AWS A5. 18 and EN ISO 544. Iron or plastic spools, normal or precision layer wound. Wire can be packed in drums 250kg, 350kg, 500 kg
Approvals:
TV, DB
REF. Sl / CJ
Date: 2012-03-08
S8
Classification:
EN 12 534 ASME/AWS SFA 5.28 EN ISO 16834-A EN ISO 16834-B Mn3Ni1Mo ER 80 S-Ni1 G 55 2A Mn3Ni1Mo G 62A 2 N2M2T
d.o.o.
MIG 65
Base materials:
SIST EN Unalloyed steel Shipbulding steel Pipe steel L 490GA, L360GA P275T1 P355N P355NL1-P460NL1 S460N S500N S460NL S500NL DIN S275-S355 A-E, AH32 EH36 ST44.0 StE 355 TStE 355 TStE 460 StE 460 - StE 500, TStE460 TStE 500 W.Nr. ~1.0411-~1.0476 1.0513 1.0589 1.0483 1.0499 1.0256 1.0562 1.0566 1.8915 1.8901-1.8907 1.8903 S500NL
ReL / Rp 0.2:
Rm: A5: KV :
MPa(N/mm ) 2 MPa(N/mm )
% J ( -20C)
Ar + 18% CO2, (M21 according to EN ISO 14175) 0,8 ; 0,9 ; 1,0 ; 1,2 ; 1,6 ( mm )
Wire electrodes are spooled in accordance with AWS A 5.18 and EN ISO 544. Iron or plastic spools, normal or precision layer wound. Wire can be packed in drums 250kg, 350kg, 500kg
REF. W / CJ
Date: 2012-01-03
S9
Classification:
EN 12534 ASME/AWS SFA 5.28 EN ISO 16834-A EN ISO 16834-B Mn3Ni1CrMo ER 100 S-1 G 69 4M Mn3Ni1CrMo G 69A 4M N3M2
d.o.o.
MIG 75
Base materials:
Special alloyed steel for construction SIST EN S690Q, S550QL1 16NiCrMo12-6 L415NB, L450MB L485MB DIN StE 690 V, StE 690 TM StE 420 - StE 500 EStE 420 - EStE 500 N-A-XTRA 70, BHV 70 V, HY 100 X60, X65, X70, X80 W.Nr. 1.8931, 1.8986, 1.6782 1.8972, 1.8975 1.8977
Pipe steel
ReL / Rp 0.2:
Rm: A5: KV :
MPa(N/mm ) 2 MPa(N/mm )
% J ( -40C)
Ar + 18% CO2, (M21 according to EN ISO 14175) 0,8 ; 1,0 ; 1,2 ; 1,6 ( mm )
Wire electrodes are spooled in accordance with AWS A5. 18 and EN ISO 544. Iron or plastic spools, normal or precision layer wound. Wire can be packed in drums 250kg, 350kg, 500kg
Approvals:
REF. W / CJ
Date: 2012-03-07
S 10
Classification:
EN 12 534 ASME/AWS SFA 5.28 EN ISO 16834-A EN ISO 16834-B 89 6M GMn4Ni2CrMo ER 120 S-G G89 6 M Mn4Ni2CrMo G 83A 6 M N4M4T
d.o.o.
MIG 90
Base materials:
High-strength fine grained steel SIST EN S890Q, XABO 890, MICRAL 890 W.Nr. 1.8940, 1.8925 1.8940
1,0 ;
1,2 ;
Wire electrodes are spooled in accordance with AWS A5. 18 and EN ISO 544 - basket spools precision layer wound. Wire can be packed in drums 250kg, 350kg, 500kg
Approvals:
TV, GL
REF. W / CJ
Date: 2012-03-07
S 11
Classification:
EN 12072 W. Nr: ASME/AWS A 5.9 EN 10088-3 97 EN ISO 14343-A EN ISO 14343-B G17 1.4016 ER 430 X6 Cr17 G17 SS430
d.o.o.
MIG 17
Base materials:
Description: Rust corrosion resistance steels with 13 - 18 % Cr. Other stainless steels and casts
Ar + 1 3 % O2, Ar + 8 % CO2, (M21, M13, M11 according to EN ISO 14175) 0,8 ; 0,9 ; 1,0 ; 1,2 ; 1,6 ( mm ) Wire electrodes are spooled in accordance with AWS A5. 18 and EN ISO 544. Iron or plastic spools, normal or precision layer wound.
REF. W / CJ
Date: 2012-03-07
S 12
Classification:
EN 12072 DIN 8556 W. Nr. ASME/AWS A 5.9 ISO EN ISO 14343-A EN ISO 14343-A EN ISO 14343-B G 19 9 Nb Si W 19 9 Nb Si SG X5CrNi Nb19 9 1.4551 ER 347 Si 19/9 Nb Si G 19 9 NbSi W 19 9 NbSi SS 347 Si
d.o.o.
Base materials:
Alloyed corrosion resistent Cast corrosion resistant steel Nb-, Ti- stabilizated Cast corrosion resistant Stabilized steel SIST EN X5CrNi 18 10 X2CrNi 19-11 GX5CrNi19-10 (LK 979) X6CrNiTi 18-10 X6CrNiNb 18-10 GX5CrNiNb19-11 (PK 11 SPL) DIN: X5CrNi 18 10 X2CrNi 19 11 G-X6 CrNi 18 9 X6CrNiTi 18 10 X6CrNiNb 18 10 G-X5CrNiNb 18 9 W.Nr. 1. 4301 1.4306 1.4308 1.4541 1.4550 1.4552
C 0,06
Si 0,80
Mn 2,0
Cr 19,0
Ni 9,0
Nb 0.70
ReL / Rp 0.2:
Rm: A5: KV :
MPa(N/mm ) 2 MPa(N/mm )
% J (+ 20 C)
length: 1000 mm
Form of delivery:
Welding wires are spooled in accordance with AWS A5. 18 and EN ISO 544. Iron or plastic spools, normal or precision layer wound. Welding rods are packed in paper carton, weight 25 kg.
Approvals:
REF. W / CJ
Date: 2012-03-07
S 13
Classification:
EN 12072 DIN 8556 W. Nr. ASME/AWS A 5.9 ISO EN ISO 14343-A EN ISO 14343-A EN ISO 14343-B G 19 9 L Si W 19 9 L Si SG X2CrNi 19 9 1.4316 ER 308 L Si 19/9 L Si G 19 9 LSi W 19 9 LSi SS 308 LSi
d.o.o.
Base materials:
Description: Alloyed corrosion resistant DIN: W.n. X5CrNi 18 9 1. 4301 X2CrNi 18 9 1.4306 X10CrNiNb18 9 1.4550
ReL / Rp 0.2:
Rm: A5: KV :
MPa(N/mm ) 2 MPa(N/mm )
% J (+ 20 C) J ( -196 C)
length: 1000 mm
Form of delivery:
Welding wires are spooled in accordance with AWS A5. 18 and EN ISO 544. Iron or plastic spools, normal or precision layer wound. Welding rods are packed in paper carton, weight 25 kg.
Approvals:
REF. W / CJ
Date: 2012-03-07
S 14
Classification:
EN 12072 DIN 8556 W. Nr. AWS A5.9 ISO EN ISO 14343-A EN ISO 14343-A EN ISO 14343-B G 19 12 3 Nb Si W 19 12 3 Nb Si SG X5CNiMoNb 19 12 1.4576 ER 318 Si 19/12/3 Nb Si G 19 12 3 NbSi W 19 12 3 NbSi S 318
d.o.o.
Base materials:
W.Nr. 1.4401 1.4436 1.4571 1.4573 1.4580 1.4583 DIN: X5 CrNiMo 17 12 X5 CrNiMo 17 13 3 X6 CrNiMoTi 17 12 2 X10 CrNiMoTi 18 12 X6 CrNiMoNb 17 12 2 X10 CrNiMoNb 18 12 EN: X5 CrNiMo 17-12-2 X3 CrNiMo 17-13-3 X6 CrNiMoTi 17 12 2 (X10 CrNiMoTi 18 12) X6 CrNiMoNb 17-12-2 (X10 CrNiMoNb 18 12)
ReL / Rp 0.2:
Rm: A5: KV :
MPa(N/mm ) 2 MPa(N/mm )
% J ( +20 C)
length: 1000 mm
Welding wires are spooled in accordance with AWS A5. 18 and EN ISO 544. Iron or plastic spools, normal or precision layer wound. Welding rods are packed in paper carton, weight 25 kg.
Approvals:
REF. W / CJ
Date: 2012-03-07
S 15
Classification:
EN 12072 DIN 8556 W. Nr. ASME/AWS A.5.9. ISO EN ISO 14343-A EN ISO 14343-A EN ISO 14343-B G 19 12 3 L Si W 19 12 3 L Si SG X2CrNiMo19 12 1.4430 ER 316 L Si 19/12/3 L Si G 19 12 3 LSi W 19 12 3 LSi SS 316 LSi
d.o.o.
Base materials:
Description Corrosion resistant steel DIN: X5CrNiMo 17 12 2 X5CrNiMo 17 13 3 X6 CrNiMoTi 17 12 2 W.Nr. 1.4401 1.4436 1.4571
ReL / Rp 0.2:
Rm: A5: KV :
MPa(N/mm ) 2 MPa(N/mm )
% J ( 20 C) J ( -110 C)
length: 1000 mm
Welding wires are spooled in accordance with AWS A5. 18 and EN ISO 544. Iron or plastic spools, normal or precision layer wound. Welding rods are packed in paper carton, weight 25 kg.
Approvals:
REF. W / CJ
Date: 2012-03-07
S 16
Classification:
EN 12072 DIN 8556 W. Nr. ASME/AWS A 5.9 EN ISO 14343-A EN ISO 14343-A EN ISO 14343-B G 23 12 L Si W 23 12 LSi SG X2CrNi 24 12 1.4332 ER 309 L Si G 23 12 LSi W 23 12 LSi SS 309 LSi
d.o.o.
Base materials:
Description: High alloyed steel Steels with high tensile straight Austenitic manganese steels Other difficult to weld steels
ReL / Rp 0.2:
Rm: A5: KV :
MPa(N/mm ) 2 MPa(N/mm )
% J ( +20 C)
0,8 ; 1,6 ;
0,9; 2,0 ;
( mm ) ( mm )
length: 1000 mm
Form of delivery:
Welding wires are spooled in accordance with AWS A5. 18 and EN ISO 544. Iron or plastic spools, normal or precision layer wound. Welding rods are packed in paper carton, weight 25 kg.
Approvals:
REF. W / CJ
Date: 2012-03-07
S 17
Classification:
EN 12072 DIN 8556 W. Nr. ASME/AWS A 5.9 ISO EN ISO 14343-A EN ISO 14343-A EN ISO 14343-B G 18 8 Mn W 18 8 Mn SG X15CrNiMn 18 8 1.4370 ER 307Si 18/8 Mn 6 G 18 8 Mn W 18 8 Mn SS 307
d.o.o.
Base materials:
Description: High alloyed steel Steels with high tensile straight Austenitic manganese steels Other difficult to weld steels
ReL / Rp 0.2:
Rm: A5: KV :
MPa(N/mm ) 2 MPa(N/mm )
% J ( +20 C)
( mm ) ( mm )
length: 1000 mm
Form of delivery:
Welding wires are spooled in accordance with AWS A5. 18 and EN ISO 544. Iron or plastic spools, normal or precision layer wound. Welding rods are packed in paper carton, weight 25 kg.
Approvals:
REF. W / CJ
Date: 2012-03-07
S 18
Classification:
EN 12072 DIN 8556 W. Nr. ASME/AWS A 5.9 EN ISO 14343-A EN ISO 14343-A EN ISO 14343-B G 25 20 W 25 20 SG X12CrNi 25 20 1.4842 ER 310 G 25 20 W 25 20 SS 310
d.o.o.
Base materials:
Special alloyed- fire resistent SIST EN X15CrNiSi20-12 X15CrNiSi25-21 X8CrNi25-21 GX40CrNiSi25-20 X10CrAlSi25 GX25CrNiSi18-9 GX40CrNiSi22-10 DIN X15 CrNi Si 20 12 X15 CrNi Si 25 20 X12 CrNi 25 21 GX40CrNiSi25-20 X10 CrAl 24 GX25CrNiSi18-9 GX40CrNiSi22-9 W.Nr. 1.4828 1.4841 1.4845 1.4848 1.4762 1.4825 1.4826
ReL / Rp 0.2:
Rm: A5: KV :
MPa(N/mm ) 2 MPa(N/mm )
% J ( +20 C)
length: 1000 mm
Form of delivery:
Welding wires are spooled in accordance with AWS A5. 18 and EN ISO 544. Iron or plastic spools, normal or precision layer wound. Welding rods are packed in paper carton, weight 25 kg.
Approvals:
REF. W / CJ
Date: 2012-03-07
S 19
Classification:
EN 12072 DIN 8556 W. Nr. ASME/AWS A 5.9 EN ISO 14343-A EN ISO 14343-A EN ISO 14343-B G 29 9 W 29 9 SG X10CrNi 30 9 1.4337 ER 312 G 29 9 W 29 9 SS 312
d.o.o.
Base materials:
Description: High alloyed steel Steels with high tensile straight Austenitic manganese steels Other difficult to weld steels
ReL / Rp 0.2:
Rm: A5: KV :
MPa(N/mm ) 2 MPa(N/mm )
% J (+ 20 C)
length: 1000 mm
Form of delivery:
Welding wires are spooled in accordance with AWS A5. 18 and E ISO 544. Iron or plastic spools, normal or precision layer wound. Welding rods are packed in paper carton, weight 25 kg
Approvals:
REF. W / CJ
Date: 2012-03-07
S 20
Classification:
EN ISO 18274 DIN 1736 W. Nr. ASME/AWS A 5.14 NiCr20 SG Ni Cr 20 Nb 2.4806 ER Ni Cr-3
d.o.o.
Base materials:
High alloyed Cr- Cr-Ni steel 9%-Ni, 1,5-5% Ni steels and other Ni - alloys Unalloyed steels with high alloyed Ni - steels Difficult to weld steels Copper and copper alloys with steels
ReL / Rp 0.2:
Rm: A5: KV :
MPa(N/mm ) 2 MPa(N/mm )
% J ( -196 C)
( mm ) ( mm )
dolina: 1000 mm
Form of delivery:
Welding wire is spooled on different spools (acc to standards AWS A5.18 and EN ISO 544. Lay to lay winding. Paper carton, weight 25 kg
REF. W / CJ
Datum: 2012-03-07
S 21
Classification:
EN 12072 W. Nr. ASME/AWS A 5.9 EN ISO 14343-A EN ISO 14343-B W 22 9 3 LN 1.4462 ER 2209 W 22 9 3 NL SS 2209
d.o.o.
Base materials:
-Feritno-avstenitna duplex jekla: 1.4462 - Varjenje razlinih jekel: 1.4462 z 1.4583 1.4462 z HI/HII, StE255, 17Mn4, 15Mo3
C < 0,03
Si 0,60
Mn 1,70
Cr 22,5
Mo 3,0
Ni 9,0
N 0,13
ReL / Rp 0.2:
Rm: A5: KV :
MPa(N/mm ) 2 MPa(N/mm )
% J ( +20C)
0,8 ; 1,6 ;
1,0; 2,0 ;
1,2; 2,4 ;
1,6 3,2
( mm ) ( mm )
length: 1000 mm
Form of delivery:
Welding wires are spooled in accordance with AWS A5. 18 and EN ISO 544. Iron or plastic spools, normal or precision layer wound. Welding rods are packed in paper carton, weight 25 kg.
REF. W / CJ
Date: 2012-03-08
S 22
Classification:
EN ISO 18274 DIN 1736 W. Nr. AWS A 5.14 NiCr22Mo9Nb SG NiCr21Mo9Nb 1.4831 ER NiCrMo-3
d.o.o.
Base materials:
Special steels and Ni-alloys High alloyed steels Welding of general and special steels together Difficult to weld steels
4,0
( mm ) ( mm )
dolina: 1000 mm
Form of delivery:
Welding wire is spooled on different spools (acc to standards AWS A5.18 and EN ISO 544. Lay to lay winding. Paper carton, weight 25 kg
REF. W / CJ
Date: 2012-03-08
S 23
Classification:
ISO 24373 W. Nr. ASME/AWS A 5.7 S-CU 1898 (CuSn1) 2.1006 ER CuSn
d.o.o.
MIG Cu TIG Cu
Base materials:
Copper and copper alloys
MPa(N/mm )
HB
0,8 ; 1,6 ;
1,0; 2,0;
( mm ) ( mm )
length: 1000 mm
Form of delivery:
Welding wires are spooled in accordance with AWS A5. 18 and EN ISO 544. Iron or plastic spools, normal or precision layer wound. Welding rods are packed in paper carton, weight 25 kg.
Approvals:
REF. W / CJ
Date: 2012-03-10
S 24
Classification:
ISO 24373 W. Nr. ASME/AWS A 5.7 S-Cu 6100 (CuAl7) 2.0921 ER CuAl-A1
d.o.o.
Base materials:
Aluminium bronze: CuAl5, CuAl8 Cast steels Nickel alloys Brass, special brass (CuZn 20Al)
MPa(N/mm ) 2 MPa(N/mm )
% HB
0,8 ; 1,6 ;
( mm ) ( mm )
length: 1000 mm
Form of delivery:
Welding wires are spooled in accordance with AWS A5. 18 and EN ISO 544. Iron or plastic spools, normal or precision layer wound. Welding rods are packed in paper carton, weight 25 kg.
Approvals:
REF. W / CJ
Date: 2012-03-10
S 25
Classification:
ISO 24373 W. Nr. ASME/AWS A 5.7 S-Cu 5180 (CuSn5P) 2.1022 ER CuSn-A
d.o.o.
Base materials:
Copper and copper alloys (CuSn2, CuSn6, CuSn8, CuSn6Zn) Grey cast iron Tin bronze and combination with other bronzes
ReL / Rp 0.2:
Rm: A5:
MPa(N/mm ) 2 MPa(N/mm )
% HB
0,8 ; 1,6 ;
1,0; 2,0;
( mm ) ( mm )
length: 1000 mm
Form of delivery:
Welding wires are spooled in accordance with AWS A5. 18 and EN ISO 544. Iron or plastic spools, normal or precision layer wound. Welding rods are packed in paper carton, weight 25 kg.
Approvals:
REF. W / CJ
Date: 2012-03-10
S 26
Classification:
ISO 24373 W. Nr. ASME/AWS A 5.7 S-Cu 1897 (CuAg1) 2.1211 -
d.o.o.
Base materials:
Copper alloys according to DIN 1787 and DIN 17 666
ReL / Rp 0.2:
Rm: A5:
MPa(N/mm ) 2 MPa(N/mm )
% HB
0,8 ; 1,6 ;
1,0; 2,0;
( mm ) ( mm )
length: 1000 mm
Form of delivery:
Welding wires are spooled in accordance with AWS A5. 18 and EN ISO 544. Iron or plastic spools, normal or precision layer wound. Welding rods are packed in paper carton, weight 25 kg.
Approvals:
REF. W / CJ
Date: 2012-03-10
S 27
Classification:
ISO 24373 S-Cu 6338 (CuMn13Al8Fe3Ni2) 2.1367 ER CuMnNiAl
d.o.o.
Base materials:
Aluminium bronzes with high Mn-content Manganese-steel casting Cast iron
ReL / Rp 0.2:
Rm: A5:
MPa(N/mm ) 2 MPa(N/mm )
% HB
0,8 ; 1,6 ;
1,0; 2,0;
( mm ) ( mm )
length: 1000 mm
Form of delivery:
Welding wires are spooled in accordance with AWS A5. 18 and EN ISO 544. Iron or plastic spools, normal or precision layer wound. Welding rods are packed in paper carton, weight 25 kg.
Approvals:
REF. W / CJ
Date: 2012-03-10
S 28
Classification:
ISO 24373 W. Nr. ASME/AWS A 5.7 S-Cu 6560 (CuSi3Mn1) 2.1461 ER CuSi-A
d.o.o.
Base materials:
Brass Materials acc. to DIN 17 666: CuSi2Mn, CuSi3Mn, CuMn2, CuMn5 Hot-dip galvanized steels
ReL / Rp 0.2:
Rm: A5:
MPa(N/mm ) 2 MPa(N/mm )
% HB
0,8 ; 1,6 ;
1,0; 2,0;
( mm ) ( mm )
length: 1000 mm
Form of delivery:
Welding wires are spooled in accordance with AWS A5. 18 and EN ISO 544. Iron or plastic spools, normal or precision layer wound. Welding rods are packed in paper carton, weight 25 kg.
Approvals:
REF. W / CJ
Date: 2012-03-10
S 29
Notes:
OXYACETILENE - WELDING
VP 37 . T1 VP 40 . T2 VP 42 . T3 VP Mo T4 VP CrMo T5
Classification:
EN 12536 DIN 8554 ASME/AWS A5.2 W.Nr. OI GI R 45 1.1116
d.o.o.
VP 37
Base materials
SIST EN General structural steels Pipe steels S 185 S355GT E 235 P235G1TH DIN St33 St52 St35 - St35.8 W.Nr. 1.0035 - 1.0580 1.0308 -1.0305
Mechanical properties
Hardness-HB 100 - 200 ReL / Rp 0.2 2 MPa(N/mm ) >260 Rm MPa(N/mm ) 360 - 450
2
A5 (%) > 20
1,6;
Approvals:
TV
REF. A / CJ
Date: 2012-01-03
T1
Classification:
EN 12536 DIN 8554 ASME/AWS A5.2 W.Nr. O II G II R 45 1.0495
d.o.o.
VP 40
Base materials
SIST EN General structual steels Pipe steels DIN W.Nr. 1.0037 - 1.0144 1.0038 1.0257 S 235JR S 275J2G3 St37-2 St44-3 S 235JRG2 P 275T2 St37.0 - St44.4
Mechanical properties
Hardness-HB 110 - 130 ReL / Rp 0.2 2 MPa(N/mm ) >300 Rm MPa(N/mm ) 390 - 440
2
A5 (%) > 20
KV +20C(J) > 50
length: 1000 mm
REF. A / CJ
Date: 2012-01-03
T2
Classification:
EN 12536 DIN 8554 ASME/AWS A5.2 W.Nr. O III G III R 60 1.6215
d.o.o.
VP 42
Base materials
SIST EN General structural steels Pipe steels Boiler plates S185 S355J0 P235G1TH P355G1TH P235GH, P236GH, P285NH, P295GH DIN St33 St52-3 St35.8, St45.8 HII, HII, HIII, 17Mn4 W.Nr. 1.0035 - 1.0553 1.0305 1.0405 1.0345, 1.0425, 1.0435, 1.0481
Mechanical properties
Hardness-HB 110 - 130 ReL / Rp 0.2 2 MPa(N/mm ) >310 Rm MPa(N/mm ) 410 - 560
2
A5 (%) > 22
length: 1000 mm
Approvals:
CR, GL, S, TV
REF. A / CJ
Date: 2012-01-03
T3
Classification:
EN 12536 DIN 8554 ASME/AWS A5.2 W.Nr. O IV G IV R 65 1.5425
d.o.o.
VP Mo
Base materials
General structural steels Pipe steels Boiler steels SIST EN S235JRG2 S355J2G3 P235G1TH, P255G1TH 16Mo3 P235GH P236GH P295GH DIN St37 St52 St35.8, St45.8 15Mo3 HI - HIII, 17Mn4 W.Nr. 1.0038 - 1.0570 1.0305, 1.0405, 1.5415 1.0345 - 1.0477, 1.0481
Mechanical properties
Hardness-HB 160 - 200 ReL / Rp 0.2 2 MPa(N/mm ) >295 Rm MPa(N/mm ) 440 - 540
2
A5 (%) > 18
KV +20C(J) >47
length: 1000 mm
REF. A / CJ
Date: 2012-01-03
T4
Classification:
EN 12536 DIN 8554 ASME/AWS A5.2 W.Nr. OV GV R 65 1.7346
d.o.o.
VP CrMo
Base materials
Boiler steels SIST EN 13CrMo4-5 DIN HIV, 13 CrMo44 W.Nr. 1.7335
Mechanical properties
Hardness-HB 160 - 200 ReL / Rp 0.2 2 MPa(N/mm ) >295 Rm MPa(N/mm ) 490 - 590
2
A5 (%) > 18
KV +20C(J) >47
length: 1000 mm
REF. A / CJ
Date: 2012-01-03
T5
EPP 2 EPP 2 Mo EPP 2 Ni EPP 3 EPP 17 Cr U1 EPP 19/9 NC EPP 19/12/3 NC EPP 18/8/6 INOX TR Cr 17 INOX TR 19/9
WIRES / STRIPS
d.o.o.
Classification:
Low alloyed welding wires: Wire: EPP 2 EPP 2 Mo EPP 3 DIN 8557 S2 S 2 Mo S3 ASME/AWS: A 5. 17 EM 12 K A 5. 23 EA 2 A 5. 17 EM 13 K ISO 14171-A S2 S2 Mo S3
High Cr and Ni alloyed welding wires: Wire: EPP 17 Cr EPP 19/9 NC EPP 19/12/3 NC EPP 18/8/6 DIN: 8556 UP - X2 CrNi 19.9 UP - X2 CrNiMo 19.12 UP - X15 CrNiMn 18.8 ASME/AWS A5.9 ER 430 ER 308 L ER 316 L ER 307 EN ISO 14343-A: EN 10088* S 17 X6 Cr17 * S 19 9 L S 19 12 3 L S 18 8 Mn
2,8
EPP INOX TR
5,0 ( mm )
Spools acc to standard 544 acc to standard 544 Drums acc to standard 544
REF. W / CJ
Date: 2012-03-10
U1
d.o.o.
FLUX-CORED WIRE FOR S.A.-WELDING FILTUB 112 . V31 FILTUB 114 . V32 FILTUB 116 . V33 FILTUB 118 . V34 FILTUB 126 . V35 FILTUB 128 . V36 FILTUB 132 . V37 FILTUB 136 . V38 FILTUB 138 . V39 FILTUB 140 ..... V40
d.o.o.
FOR HARDFACING: FILTUB DUR 205 .. FILTUB DUR 212 .. FILTUB DUR 214 .. FILTUB DUR 215 .. FILTUB DUR 12Cr2NiMo .. FILTUB DUR 13Cr3NiMoV FILTUB DUR 17 Cr . V41 V42 V43 V44 V45 V46 V47
FLUX-CORED WIRE FOR WELDING STAINLESS STEELS FILCORD 308 L .......................... V48 FILCORD 316 L .......................... V49 FILCORD 309 L .......................... V50 FILCORD 307 ............................. V51
d.o.o.
FILTUB 12 M
Classification: AWS A-5.18 : E 70 C 6MH4 AWS A-5.20 : E 71 T 1MH4 : T 46 4 M M 1 EN 758 EN ISO 17632-A : T 46 4 MM1 H5 EN ISO 17632-B : T554T151MA H5
Base materials:
Art of steel Non-alloyed steels : Boiler plates : Pipe steels : DIN : St 33 , St 37-2 , St 44-2 , St 52-3 H I , H II , 17Mn4 St 37-0 to St 52-0 , St 37-4 to St 52-4 St 210.7 to St 415.7 StE 290.7 TM to StE 480.7 TM X 42 to X 70 A,B,D,E AH 32 to EH 36 StE 255 to StE 460 WStE 255 to WStE 460 GS-38 , GS-45 , GS-52 W.Nr. : 1.0033 , 1.0037 , 1.0044 , 1.0553 1.0345 , 1.0425 , 1.0481 1.0254 to 1.0421 , 1.0255 to 1.0581 1.0307 to 1.8972 1.429 to 1.8977 1.0440 , 1.0472 , 1.0475 , 1.0476 1.0513 to 1.0589 1.0461 to 1.0562 1.0462 to 1.8937 1.0420 , 1.0443 , 1.0552
Welding current:
DC + / ( -)
Welding positions:
Mechanical properties: Yield strength
ReL / Rp 0.2:
Rm: A5: KV : KV : KV :
MPa(N/mm ) MPa(N/mm )
% J ( + 20C ) J ( - 20C ) J ( - 40 C)
2
Date:2009-06-10
V1
Classification: AWS-SFA-5.29 : E 111 T1-K 4H4 AWS-SFA-5.28 : E 111 C-K 4H4 EN 12535 : T 69 4 Mn 2Ni Cr Mo M M 1 H5 EN ISO 18762-A: T 69 4 Mn2NiCrMoMM1 H5 EN ISO 18762-B: T 76 4 T5-1MA-N4C1M2 H5
d.o.o.
FILTUB 32M
Base materials:
Art of steel Creep resistant finegrained steels : DIN : NAXTRA 63 , NAXTRA 70 T 1 , T 1A , T 1B ( TStE 690 ) W.Nr. : 1.8954 , 1.8964 1.8920 , 1.8921 , 1.8922
Welding current:
DC + / ( -)
Welding positions:
Mechanical properties: Yield strength Tensile strength Elongation Rp 0.2 %: > 690 Rm: A5: Av : Av : Av : Av : Av : 760 - 900 > 16 > 80 > 70 > 60 > 55 > 47 N/mm2 N/mm2 % J ( +20C ) J ( 0C ) J ( - 20C ) J ( - 40C ) J ( - 60C )
Impact energy
Date:2009-06-10
V2
d.o.o.
FILTUB 4 R
Base materials:
Art of steel Non-alloyed steels : Boiler plates : Pipe steels : DIN : St 33 , St 37-2 , St 44-2 , St 52-3 H I , H II , 17Mn4 St 37-0 to St 52-0 , St 37-4 to St 52-4 St 210.7 to St 415.7 StE 290.7 TM to StE 480.7 TM A,B,D,E AH 32 to EH 36 X 42 to X 70 StE 255 to StE 460 W.Nr. : 1.0033 , 1.0037 , 1.0044 , 1.0553 1.0345 , 1.0425 , 1.0481 1.0254 to 1.0421 , 1.0255 to 1.0581 1.0307 to 1.8972 1.0429 to 1.8977 1.0440 , 1.0472 , 1.0475 , 1.0476 1.0513 to 1.0589 1.0461 to 1.0562
Welding current:
DC +
Welding positions:
ReL / Rp 0.2:
Rm: A5: KV : KV : KV :
MPa(N/mm ) MPa(N/mm )
% J ( +20 C) J ( -20 C) J ( -40 C)
2
Date:2009-06-10
V3
Classification: AWS A-5.29 :E 71 T1-G EN 758 :T 46 A 1 NiCrCuP M 1 EN ISO 17632-A :T504 ZPC/M1H5 EN ISO 17632-B :T554T1-1C/MA-NCC1 H5
d.o.o.
FILTUB 5R
Base materials:
Art of steel Weather corrosion resistant steels : WTSt 37-3 , WTSt 52-3 CORTEN A , B , C Patinax 37 Acor 37 , Acor 50 SN 15217 W.Nr. : 1.8961 , 1.8963 1.8962 , 1.8963 1.8960 1.8960 , 1.8962 1.8963
Welding current:
DC +
Welding positions:
Mechanical properties: Yield strength Tensile strength ReL / Rp 0.2: > 460 Rm: A5: KV : 530 - 680 > 22 > 47 MPa(N/mm ) MPa(N/mm ) % J ( - 40 C)
2 2
Date : 2009-06-10
V4
d.o.o.
FILTUB 6 R
Classification: AWS A-5.29 : E 70 T1-G EN 758 :T 42 A 1 Ni P C 1 / T 42 A 1 Ni P M 1 EN ISO 17632-A :T42A ZPC/M 1 H5 EN ISO 17632-B :T49Y T1-1C/MA-G H5
Base materials:
Art of steel Weather corrosion resistant steels : DIN WTSt 37-3 , WTSt 52-3 CORTEN A , B , C Patinax 37 Acor 37 , Acor 50 RBH 35 W.Nr. : 1.8961 , 1.8963 1.8962 , 1.8963 1.8960 1.8960 , 1.8962
Welding current:
DC +
Welding positions:
ReL / Rp 0.2:
Rm: A5: KV :
MPa(N/mm ) MPa(N/mm )
% J ( +20 C)
2
Date:2009-06-10
V5
Classification: AWS-SFA-5.29 :E 81 T1 - Ni1 EN 758 :T 46 4 1Ni P M1 : T561 GPH BS 7084-89 EN ISO 17632-A :T46 6 1NiPM1 H5 EN ISO 17632-B :T556T1-1MA-N1 H5
d.o.o.
FILTUB 7 R
Base materials:
Art of steel Constructional steels and boiler plates : Pipe steels : DIN St 37.2 , St 44.2 , St 52.3 H I , H II , 17Mn4 St 37-0 to St 52-0 St 37-4 to St 52-4 StE 210.7 to StE 415.7 StE 290.7 to StE 480.7 X 42 to X 80 AH 32 to AH 36 StE 255 to STE 460 EStE 255 to EStE 460 W.Nr. : 1.0037 , 1.0044 , 1.0570 1.0345 , 1.0425 , 1.0481 1.0254 to 1.0481 1.0255 to 1.0581 1.0319 to 1.8972 1.484 to 1.8977 1.0513 to 1.0583 1.0461 to 1.8905 1.1103 to 1.8918
Welding current:
DC +
Welding positions:
ReL / Rp 0.2:
Rm: A5: KV : KV : KV : KV :
> 490 560 - 660 > 23 > 110 > 80 > 60 > 47
MPa(N/mm ) MPa(N/mm )
% J J J J ( + 20C ) ( - 20C ) ( - 40C ) ( - 60C )
2
Date: 2009-06-10
V6
d.o.o.
FILTUB 8 R
Classification: AWS-SFA-5.29 : E 81 T1-A1 EN 758 : T 46 A Mo P M 2 EN ISO 17634-A : TMoPC/M1 H5 EN ISO 17634-B : T49T1-1C/M-2M3 H5 EN ISO 17632-A : T46 AMoPM1 H5 EN ISO 17632-B : T55YT1-1MA-2M3 H5
Base materials:
Art of steel Boiler plates : Pipe steels : Steels to API-Norm : Finegrained steels DIN : H I , H II , H III 17Mn4 , 19Mn5 St 35.8 , St 45.8 15Mo3 X 42 to X 80 StE 255 to StE 460 W.Nr. : 1.0345 , 1.0425 , 1.0435 1.0481 , 1.0482 1.0305 , 1.0405 1.5415 1.0461 to 1.8905
Welding current:
DC +
Welding positions:
ReL / Rp 0.2:
Rm: A5: KV :
MPa(N/mm ) MPa(N/mm )
% J ( +20 C)
2
Date: 2009-06-10
V7
Classification: AWS-SFA-5.20 : E 70 T 5 H5 EN 758 : T 42 4 B C 3 / T 42 4 B M 3 BS 7084-89 : T 540 GBH EN ISO 17632-A : T424BM/C3 H5 EN ISO 17632-B : T494T5.3M/CA H5
d.o.o.
FILTUB 12 B
Base materials:
Art of steel Non-alloyed steels : Boiler plates : Pipe steels : Steels to API-Norm : Age-resistant steels : Shipbuildung steels : Steel castings : Finegrained steels : DIN : St 33 to St 70 H I , H II , 17Mn4 , 19Mn5 St 37-0 to St 52-0 , St-37-4 to St-52-4 StE 210.7 to StE 360.7 X 42 to X 80 Ast 35 to Ast 45 A,B,D,E GS-38 to GS-60 StE 255 to StE 355 WStE 255 to WStE 355 TStE 255 to TStE 355 W.Nr. : 1.0033 to 1.0070 1.0345 , 1.0425 , 1.0481 , 1.0482 1.0254 to 1.0421 , 1.0255 to 1.0581 1.307 to 1.0582 1.0346 to 1.0436 1.0440 , 1.0472 , 1.0475 , 1.0476 1.0420 to 1.0558 1.0461 to 1.0562 1.0462 to 1.0565 1.0463 to 1.0566
Welding current:
DC + / ( -)
Welding positions:
Mechanical properties: Yield strength
ReL / Rp 0.2:
Rm: A5 : KV : KV : KV :
> 420 510 - 610 > 26 > 160 > 100 > 60
MPa(N/mm ) MPa(N/mm )
% J ( + 20 C ) J ( - 20 C ) J ( - 40 C )
2
Date: 2009-06-10
V8
Classification: AWS A-5.29 : E 80 T5-G : T 46 2 Mo B C 3 / EN 758 T 46 2 Mo B M 3 EN ISO 17634-A : TMoBC/M1 H5 EN ISO 17634-B : T49T5-0M/C-2M3 H5 EN ISO 17632-A : T46 4MoBC/M3 H5 EN ISO 17632-B : T554T53M/CA-2M3 H5
d.o.o.
FILTUB 14 B
Base materials:
Art of steel Boiler plates and Pipe steels : Steels to API-Norm : Finegrained steels : DIN : 17Mn4 , 19Mn5 , 15Mo3 16Mo5 , St 45.8 , StE 360.7 StE 385.7 , StE 415.7 X 52 , X 56 , X 60 StE 355 to StE 460 WStE 355 to WStE 460 TStE 355 to TStE 460 GS-52 , GS-60 , GS-20Mn5 GS-22Mo4 W.Nr. : 1.0481 , 1.0482 , 1.5415 1.5423 , 1.0405 , 1.0582 1.8970 , 1.8972 1.0562 to 1.8905 1.0565 to 1.8935 1.0566 to 1.8915 1.0552 , 1.0558 , 1.1120 1.5419
Steel castings :
Welding current:
DC + / ( -)
Welding positions:
Mechanical properties: Yield strength
ReL / Rp 0.2 :
Rm : A5 : KV : KV : KV :
MPa(N/mm ) MPa(N/mm )
% J ( + 20C) J ( - 20C ) J ( - 40C )
2
Date: 2009-06-10
V9
Classification: AWS A-5.29 :E 80 T5-B2 EN 12071 :T Cr Mo 1 B C (M) 3 EN ISO 17634-A :TCrMo1BM/C 3H5 EN ISO 17634-B :T55T5-OM/C-1CM-H5
d.o.o.
FILTUB 16 B
Base materials:
Art of steel Boiler plates and tubes : Steel for the cementation : Steel castings : DIN : H IV L , 13CrMo44 16CrMoV4 , 11CrMo55 15Cr3 , 16MnCr5 20MnCr5 , 15CrMo5 GS-17CrMo55 , GS-22CrMo54 GS-17CrMnMo55 W.Nr. : 1.0447 , 1.7335 1.7728 , 1.7339 1.7015 , 1.7131 1.7147 , 1.7262 1.7357 , 1.7354 1.7352
Welding current:
DC + / ( -)
Hydrogen content / 100 g weld metal: Mechanical properties: Yield strength Tensile strength
Welding positions:
ReL / Rp 0.2:
Rm: A5: KV :
MPa(N/mm ) MPa(N/mm )
% J ( +20C)
2
Date: 2009-06-10
V10
Classification: AWS-SFA-5.29 :E 80 T5-G EN 12071 :T Cr Mo 2 B C (M) 3 EN ISO 17634-A :TCrMo2BM/C 3H5 EN ISO 17634-B :T62T5-OM/C-2C1M-H5
d.o.o.
FILTUB 18 B
Base materials:
Art of steel Heat resistant steels : Steel castings : DIN : 10CrMo 9.10 , 10CrSiMoV 12CrSiMo8 GS-17CrMo9.10 , GS12CrMo9.10 GS-19CrMo9.10 W.Nr. : 1.7380 , 1.8075 1.7379 , 1.7380 1.7382
Heat treatment:
Tempered at 700C 1 h / cooled in oven down to 300C .
Type of wire :
basic
Welding current:
DC + / ( -)
Welding positions:
Mechanical properties: Yield strength
ReL / Rp 0.2:
Rm: A5: KV :
MPa(N/mm ) MPa(N/mm )
% J ( +20 C)
2
Date: 2009-06-10
V11
d.o.o.
FILTUB 19 B
Base materials:
Art of steel Creep resistant finegrained steels DIN : 10CrMo11 17CrMoV10 W.Nr. : 1.7276 1.7766
Welding current:
DC + / ( -)
Welding positions:
Mechanical properties: Yield strength
ReL / Rp 0.2:
Rm: A5: KV : KV : KV :
> 450 550 - 650 > 22 > 140 > 120 > 100
MPa(N/mm ) MPa(N/mm )
% J ( +20 C ) J ( 0 C ) J ( - 20 C )
2
Date: 2009-06-10
V12
d.o.o.
FILTUB 25 B
Base materials:
Art of steel Creep resistant steels : Cast steels : DIN : 21CrMoV5 11 , 14CrMoV6 9 15CrMoV5 9 GS-17CrMoV 5 11 S W.Nr.: 1.8070 , 1.7735 1.7706
Welding current:
DC + / ( -)
Welding positions:
Mechanical properties: Yield strength
ReL / Rp 0.2:
Rm: A5: KV :
MPa(N/mm ) MPa(N/mm )
% J ( +20 C)
2
Date: 2009-06-10
V13
Classification: AWS-SFA-5.29 :E 90 T5-G :T 50 6 1 Ni Mo B C 3 / EN 758 T 50 6 1 Ni Mo B M 3 EN ISO 18276-A :T5561NiMoBC/M 3H5 EN ISO 18276-B :T626T4-3C/M-N2M2 H5
d.o.o.
FILTUB 28 B
Base materials:
Art of steel Finegrained steels : Creep resistant finegrained steels : Heat-treated finegrained steels : DIN : StE 460 , StE 500 WStE 500 , TStE 460 TStE 500 NAXTRA 56 , NAXTRA 63 HY 80 WB 35 , WB 36 BHW 35 , BHW 38 W.Nr. : 1.8905 , 1.8907 1.8937 , 1.8915 1.8917 1.8944 , 1.8954 1.6780 1.8817 , 1.6368 1.8807
Welding current:
DC + / ( -)
Welding positions:
Mechanical properties: Yield strength Tensile strength
ReL / Rp 0.2:
Rm: A5: KV : KV : KV : KV : KV :
> 560 650 - 750 > 20 > 120 > 110 > 80 > 60 > 47
MPa(N/mm ) MPa(N/mm )
% J ( + 20C ) J ( 0C ) J ( - 20C ) J ( - 40C ) J ( - 60 C)
2
Date: 2009-06-10
V14
Classification: AWS-SFA-5.29 : E 110 T5-K 4 EN 12535 : T 69 6 Mn 2Ni Cr Mo B M(C) 3 EN ISO 18276-A :T696Mn2NiCrMoBM/C 3H5 EN ISO 18276-B :T766T5-3M/CA-N4C1M2 H5
d.o.o.
FILTUB 32 B
Base materials:
Art of steel Creep resistant finegrained steels : DIN : NAXTRA 63 , NAXTRA 70 T 1 , T 1A , T 1B ( TStE 690 ) W.Nr. : 1.8954 , 1.8964 1.8920 , 1.8921 , 1.8922
Welding current:
DC + / ( -)
Welding positions:
ReL / Rp 0.2:
Rm: A5: KV : KV : KV : KV : KV :
> 690 750 - 850 > 16 > 80 > 70 > 60 > 55 > 47
MPa(N/mm ) MPa(N/mm )
% J ( +20C ) J ( 0C ) J ( - 20C ) J ( - 40C ) J ( - 60C )
2
Date: 2009-06-10
V15
Classification: AWS-SFA-5.29 : E 80 T5-G EN 758 : T 42 6 2Ni B M 3 EN ISO 17632-A :T428 2NiBM3 H5 EN ISO 17632-B :T498T5-3MA-N5 H5
d.o.o.
FILTUB 36 B
Base materials:
Art of steel Finegrained steels : Cryolitic steels : DIN : TStE 255 to TStE 380 EstE 255 to EStE 380 TTSt 35N , TTSt 35V TTSt 41N , TTSt 41V TTSt 45N , TTSt 45V 14Ni6 , 10Ni14 16Ni14 W.Nr. : 1.0463 to 1.8910 1.1103 to 1.8911 1.1101 , 1.1101
Welding current:
DC + / ( -)
Welding positions:
Mechanical properties: Yield strength Tensile strength
ReL / Rp 0.2:
Rm : A5: KV :
> 440 520 - 620 > 26 > 160 > 100 > 47
MPa(N/mm ) MPa(N/mm )
% J ( + 20 C ) J ( - 40 C ) J ( - 80 C )
2
Date: 2009-06-10
V16
Classification: AWS-SFA-5.29 :E 120 T5-G EN 12535 : T89 4 Mn2Ni1CrMo B M3 H5 EN ISO 18276-A :T894Mn2Ni1CrMoBM3 H5 EN ISO 18276-B :T834T5-3MA-N4C2M2 H5
d.o.o.
FILTUB 38 B
Base materials:
Art of steel Finegrained steels : Creep resistant finegrained steels : DIN StE 460 , StE 500 WStE 500 , TStE 460 TStE 500 NAXTRA 56 , NAXTRA 63 HY 80 WB 35 , WB 36 BHW 35 , BHW 38 XABO 620 , XABO 890 , XABO 960 W.Nr. : 1.8905 , 1.8907 1.8937 , 1.8915 1.8917 1.8944 , 1.8954 1.6780 1.5403 , 1.6368 1.8807 1.8914 , 1.8925 , 1.8933
Welding current:
DC + / ( -)
Welding positions:
Mechanical properties: Yield strength Tensile strength
ReL / Rp 0.2:
Rm: A5 : KV : KV : KV :
MPa(N/mm ) MPa(N/mm )
% J ( 0C ) J ( - 20C ) J ( - 40C )
2
Date: 2009-06-10
V17
d.o.o.
FILTUB 40 B
Base materials:
Art of steel Weather corroion resistant steels : DIN : StE 420 , StE 460 ACOR 37-2 , ACOR 37-3 , ACOR 52-3 CORTEN A,B Patinax 37 WStE 420 , WStE 460 TStE 420 , TStE 460 EStE 420 , EStE 460 W.Nr. : 1.8902 , 1.8905 1.8960 , 1.8961 , 1.8963 1.8962 , 1.8963 1.8960 1.8932 , 1.8935 1.8912 , 1.8915 1.8913 , 1.8918
Welding current:
DC + / ( -)
Welding positions:
Mechanical properties: Yield strength Tensile strength
ReL / Rp 0.2:
Rm: A5: KV : KV : KV :
MPa(N/mm ) MPa(N/mm )
% J ( + 20C ) J ( - 20C ) J ( - 60C )
2
Date: 2009-06-10
V18
d.o.o.
FILTUB 42 B
Base materials:
Art of steel Machine and tool steels : Steel castings : DIN : 34CrNiMo6 , 30CrNiMo8 , 34CrMo4 25CrMo4 , 28NiCrMo4 ,28NiCrMo5 5 32NiCrMo8 5 GS-24CrNiMo3 2 5 W.Nr. : 1.6582 , 1.6580 , 1.7220 1.7218 , 1.6513 , 1.6732 1.6581 1.6552
Heat treatment:
Tempered 2 h at 640C / cooled in oven down to 300C .
Type of wire :
basic
Welding current:
DC + / ( -)
Welding positions:
Mechanical properties: Yield strength Tensile strength
ReL / Rp 0.2:
Rm: A5: KV :
MPa(N/mm ) MPa(N/mm )
% J ( + 20 C)
2
Date: 2009-06-10
V19
d.o.o.
FILTUB DUR 3
Base materials:
Steels Steel castings
Welding current:
DC + / ( -)
Welding positions:
Mechanical properties: Hardness: 225 - 275 HB
The hardness of the deposit depending on the relevant welding conditions and the chemical composition of the base metal .
Date: 2009-06-10
V20
Classification: DIN 8555 : MSG 1 GF M21 300 MSG 1 GF C1 300 EN 14700: T Fe1
d.o.o.
FILTUB DUR 4
Base materials:
Steels Cast steels
Welding current:
DC + / ( -)
Welding positions:
Mechanical properties:
Hardness:
275 - 325 HB
The hardness of the deposit depending on the relevant welding conditions and the chemical composition of the base metal .
Date : 2009-06-10
V21
d.o.o.
FILTUB DUR 5
Base materials:
Steels Steel castings
Welding current:
DC + / ( -)
Welding positions:
Mechanical properties:
Hardness:
325 - 375 HB
The hardness of the deposit depending on the relevant welding conditions and the chemical composition of the base metal .
Date: 2009-06-10
V22
d.o.o.
FILTUB DUR 12
Base materials:
Steels Steel castings
Welding current:
DC + / ( -)
Welding positions:
Mechanical properties:
Hardness:
37 - 42 HRC
The hardness of the deposit depending on the relevant welding conditions and the chemical composition of the base metal .
Date:2010-06-18
V23
Classification: DIN 8555 : MSG 6-GF-C1-55 GP/ MSG 6-GF-M21-55 GP EN 14700 : T Fe2
d.o.o.
FILTUB DUR 14
Base materials:
Steels Steel castings
Welding current:
DC + / ( -)
Welding positions:
Mechanical properties: Hardness: 48 - 53 HRC
The hardness of the deposit depending on the relevant welding conditions and the chemical composition of the base metal .
Date: 2009-06-10
V24
d.o.o.
Base materials:
Steels Cast steels
Welding current:
DC + / ( -)
Welding positions:
< 5 ml
Hardness:
53 - 56 HRC
The hardness of the deposit depending on the relevant welding conditions and the chemical composition of the base metal .
Date: 2010-06-18
V25
d.o.o.
FILTUB DUR 16
Base materials:
Steels Steel castings
Welding current:
DC + / ( -)
Welding positions:
Mechanical properties: Hardness: 56 - 60 HRC
The hardness of the deposit depending on the relevant welding conditions and the chemical composition of the base metal .
Date: 2009-06-10
V26
d.o.o.
FILTUB UTOP 38
Base materials:
Alloyed tool steels
Welding current:
DC + / ( -)
Welding positions:
Mechanical properties: Hardness: 36 - 42 HRC
The hardness of the deposit depending on the relevant welding conditions and the chemical composition of the base metal .
Date: 2010-06-18
V27
d.o.o.
FILTUB UTOP 55
Base materials:
Alloyed tool steels
Welding current:
DC + / ( -)
Welding positions:
Mechanical properties: Hardness: 53 - 60 HRC
The hardness of the deposit depending on the relevant welding conditions and the chemical composition of the base metal .
Date: 2009-06-10
V28
d.o.o.
FILTUB UTOP Co
Base materials:
Alloyed tool steels
Welding current:
DC + / ( -)
Welding positions:
< 5 ml
Mechanical properties:
Hardness:
47-52 HRC
The hardness of the deposit depending on the relevant welding conditions and the chemical composition of the base metal .
2010-06-18
V29
Classification: DIN 8555 :MSG 5 GF M21 50-GP MSG 5 GF C1 50-GP EN 14700 :T Fe3
d.o.o.
Base materials:
Alloyed tool steels
Welding current:
DC + / ( -)
Welding positions:
< 5 ml
Mechanical properties:
Hardness:
47 - 52 HRC
The hardness of the deposit depending on the relevant welding conditions and the chemical composition of the base metal.
2009-06-10
V30
d.o.o.
FILTUB 112
Base materials:
Art of steel Non-alloyed steels : Boiler plates : Pipe steels : Finegrained steels : DIN : St 33 to St 70 H I , H II , 17Mn4 , 19Mn5 St 37-0 to St 52-0 , St-37-4 to St-52-4 StE 210.7 to StE 360.7 StE 255 to StE 355 WStE 255 to WStE 355 TStE 255 to TStE 355 W.Nr. : 1.0033 to 1.0070 1.0345 , 1.0425 , 1.0481 , 1.0482 1.0254 to 1.0421 , 1.0255 to 1.0581 1.0307 to 1.0582 1.0461 to 1.0562 1.0462 to 1.0565 1.0463 to 1.0566
Welding current:
DC + and AC
0,05
Welding flux :
FB TT
ReL / Rp 0.2:
Rm: A5: KV : KV : KV :
> 460 550 - 650 > 24 > 160 > 140 > 100
MPa(N/mm ) MPa(N/mm )
% J ( 0 C ) J ( - 20 C ) J ( - 40 C )
2
Date: 2010-06-18
V31
Classification: EN ISO 24 589-A: SMo FB EN ISO 24 589-B: S 554 FB TU1M3 AWS-SFA-5.23 : F 7 A 4-EC-A 4
d.o.o.
FILTUB 114
Base materials:
Art of steel Boiler plates and pipe steels : Finegrained steels : DIN : 17Mn4 , 19Mn5 , 15Mo3 16Mo5 , St 45.8 , StE 360.7 StE 385.7 , StE 415.7 StE 355 to StE 460 WStE 355 to WStE 460 TStE 355 to TStE 460 GS-52 , GS-60 , GS-20Mn5 GS-22Mo4 W.Nr. : 1.0481 , 1.0482 , 1.5415 1.5423 , 1.0405 , 1.0582 1.8970 , 1.8972 1.0562 to 1.8905 1.0565 to 1.8935 1.0566 to 1.8915 1.0552 , 1.0558 , 1.1120 1.5419
Steel castings :
Welding current:
DC + and AC
0,05
Welding flux :
FB TT
ReL / Rp 0.2:
Rm: A5: KV : KV : KV : KV :
> 450 540 - 640 > 24 > 180 > 160 > 140 > 80
MPa(N/mm ) MPa(N/mm )
% J( J( J( J( + 20 C) 0 C) - 20 C) - 40 C)
2
Date: 2009-06-10
V32
d.o.o.
FILTUB 116
Base materials:
Art of steel Boiler plates and tubes : Steel for the cementation : Steel castings : DIN : H IV L , 13CrMo44 16CrMoV4 , 11CrMo55 15Cr3 , 16MnCr5 20MnCr5 , 15CrMo5 GS-17CrMo55 , GS-22CrMo54 GS-17CrMnMo55 W.Nr. : 1.0447 , 1.7335 1.7728 , 1.7339 1.7015 , 1.7131 1.7147 , 1.7262 1.7357 , 1.7354 1.7352
Welding current:
DC + and AC
0,05
Welding flux :
FB TT
ReL / Rp 0.2:
Rm: A5: KV :
MPa(N/mm ) MPa(N/mm )
% J ( + 20 C)
2
Date:2009-06-10
V33
d.o.o.
FILTUB 118
Base materials:
Art of steel Heat resistant steels : Steel castings : DIN : 10CrMo 9.10 , 10CrSiMoV 12CrSiMo8 GS-17CrMo9.10 , GS12CrMo9.10 GS-19CrMo9.10 W.Nr. : 1.7380 , 1.8075 1.7379 , 1.7380 1.7382
Heat treatment:
Tempered at 720 1 h / cooled in oven down to 300C .
Type of wire :
basic
Welding current:
DC + and AC
0,09
Welding flux :
FB TT
ReL / Rp 0.2:
Rm: A5: KV :
MPa(N/mm ) MPa(N/mm )
% J ( + 20 C)
2
Date:2009-06-10
V34
d.o.o.
FILTUB 126
Base materials:
Art of steel Fine-grain structural steels : DIN : St E 355 to St E 460 W St E 355 to W St E 460 T St E 355 to T St E 460 E St E 355 to E St E 460 W.Nr. : 1.0562 to 1.8905 1.0565 1.0566 to 1.8915 1.1106
Welding current:
DC + and AC
0,05
Welding flux :
FB TT
Rp 0.2 %: > 450 Rm: A5: Av Av Av Av : : : : 540 - 620 > 24 > 160 > 140 > 100 > 60
Date: 2012-01-10
V35
d.o.o.
FILTUB 128
Base materials:
Art of steel Finegrained steels : Creep resistant finegrained steels : Heat-treated finegrained steels : DIN : StE 460 , StE 500 WStE 500 , TStE 460 TStE 500 NAXTRA 56 , NAXTRA 63 HY 80 WB 35 , WB 36 BHW 35 , BHW 38 W.Nr. : 1.8905 , 1.8907 1.8937 , 1.8915 1.8917 1.8944 , 1.8954 1.6780 1.8817 , 1.6368 1.8807
Welding current:
DC + and AC
0,05
Welding flux :
FB TT
ReL / Rp 0.2:
Rm: A5: KV : KV : KV : KV :
> 550 630 - 730 > 20 > 160 > 120 > 100 > 60
MPa(N/mm ) MPa(N/mm )
% J J J J ( + 20C ) ( - 20C ) ( - 40C ) ( - 60C )
2
Date: 2009-06-10
V36
Classification: EN ISO 26 304-A: S696FBT3Ni2.5NiCrMo EN ISO 26 304-B: S78A6FB TUN5CM3 AWS-SFA-5.23 : F 11 A 8-EC-F5
d.o.o.
FILTUB 132
Base materials:
Art of steel Creep resistant finegrained steels : DIN : NAXTRA 63 , NAXTRA 70 T 1 , T 1A , T 1B ( TStE 690 ) W.Nr. : 1.8954 , 1.8964 1.8920 , 1.8921 , 1.8922
Welding current:
DC + and AC
0,05
Welding flux :
FB TT
ReL / Rp 0.2:
Rm: A5: KV KV KV KV : : : :
> 680 740 - 820 > 16 > 120 > 90 > 70 > 47
MPa(N/mm ) MPa(N/mm )
% J( J( J( J( +20 C ) - 20 C ) - 40 C ) - 60 C )
2
Date: 2009-06-10
V37
d.o.o.
FILTUB 136
Base materials:
Art of steel Finegrained steels : Cryolitic steels : DIN : TStE 255 to TStE 380 EstE 255 to EStE 380 TTSt 35N , TTSt 35V TTSt 41N , TTSt 41V TTSt 45N , TTSt 45V 14Ni6 , 10Ni14 16Ni14 W.Nr. : 1.0463 to 1.8910 1.1103 to 1.8911 1.1101 , 1.1101
Welding current:
DC + and AC
0,04
Welding flux :
FB TT
ReL / Rp 0.2:
Rm: A5 : KV KV KV KV KV : : : : :
> 370 480 - 580 > 26 > 140 > 120 > 100 > 80 > 47
MPa(N/mm ) MPa(N/mm )
% J ( - 20 C) J ( - 40 C) J ( - 60 C) J ( - 80 C) J ( -105 C)
2
Date: 2009-06-10
V38
d.o.o.
FILTUB 138
Base materials:
Art of steel Finegrained steels : Creep resistant finegrained steels : Heat-treated finegrained steels : DIN StE 460 , StE 500 WStE 500 , TStE 460 TStE 500 NAXTRA 56 , NAXTRA 63 HY 80 WB 35 , WB 36 BHW 35 , BHW 38 XABO 620 , XABO 890 , XABO 960 W.Nr. : 1.8905 , 1.8907 1.8937 , 1.8915 1.8917 1.8944 , 1.8954 1.6780 1.5403 , 1.6368 1.8807 1.8914 , 1.8925 , 1.8933
Welding current:
DC + and AC
0,08
Welding flux :
FB TT
ReL / Rp 0.2:
Rm: A5: KV : KV : KV :
MPa(N/mm ) MPa(N/mm )
% J ( 0 C) J ( - 20 C) J ( - 40 C)
2
Date: 2010-06-18
V39
d.o.o.
FILTUB 140
Base materials:
Art of steel Weather corroion resistant steels : DIN : StE 420 , StE 460 ACOR 37-2 , ACOR 37-3 , ACOR 52-3 CORTEN A,B Patinax 37 WStE 420 , WStE 460 TStE 420 , TStE 460 EStE 420 , EStE 460 W.Nr. : 1.8902 , 1.8905 1.8960 , 1.8961 , 1.8963 1.8962 , 1.8963 1.8960 1.8932 , 1.8935 1.8912 , 1.8915 1.8913 , 1.8918
Welding current:
DC + and AC
0,05
Welding flux :
FB TT
MPa(N/mm ) MPa(N/mm )
% J ( + 20 C)
2
Date: 2009-06-10
V40
d.o.o.
Base materials:
Steels Steel castings
Welding current:
DC + and AC
3 8
Welding flux :
FB 12.2
Interpass temperature :
< 400 C
The hardness of the deposit depending on the relevant welding conditions and the chemical composition of the base metal. Machinability : good with carbide tipped tools
Date: 2009-06-10
V41
d.o.o.
Base materials:
Steels Steel castings
Welding current:
DC + and AC
3 8
Welding flux :
FB 12.2
Interpass temperature :
< 400 C
The hardness of the deposit depending on the relevant welding conditions and the chemical composition of the base metal. Machinability : good with carbide tipped tools
Date: 2009-06-10
V42
d.o.o.
Base materials:
Steels Steel castings
Welding current:
DC + and AC
2 4
Welding flux :
FB 12.2
Interpass temperature :
< 400 C
The hardness of the deposit depending on the relevant welding conditions and the chemical composition of the base metal. Machinability : machinable with carbide tools only after pre-heating at 400C.
Date: 2010-06-23
V43
d.o.o.
Base materials:
Steels Steel castings
Welding current:
DC + and AC
2 4
Welding flux :
FB 12.2
Interpass temperature :
< 400 C
The hardness of the deposit depending on the relevant welding conditions and the chemical composition of the base metal. Machinability : by grinding
Date: 2009-06-10
V44
d.o.o.
Base materials:
Steels Steel castings
Welding current:
DC + and AC
2 4
Welding flux :
FB 12.2
Interpass temperature :
< 400C
The hardness of the deposit depending on the relevant welding conditions and the chemical composition of the base metal. Machinability : good with carbide tipped tools
Date: 2009-06-10
V45
d.o.o.
Base materials:
Steels Steel castings
Welding current:
DC + and AC
2 4
Welding flux :
FB 12.2
Interpass temperature :
< 350 C
The hardness of the deposit depending on the relevant welding conditions and the chemical composition of the base metal. Machinability : good with carbide tipped tools
Date: 2009-06-10
V46
d.o.o.
FILTUB DUR 17 Cr
Base materials:
Steels Steel castings
Welding current:
DC + and AC
2 4
Welding flux :
AB Cr
Interpass temperature :
< 350 C
The hardness of the deposit depending on the relevant welding conditions and the chemical composition of the base metal. Machinability : good with carbide tipped tools
Date: 2009-06-10
V47
Classification: AWS-SFA-5.22 : E 308L TO 1 : E 308L TO 4 EN ISO 17633-A :T19 9LR M/C5 EN ISO 17633-B :TS308L-F M/C0
d.o.o.
FILCORD 308L
Base materials:
Art of steel Alloyed corrosion resistant DIN : X 5 CrNi 18 10 , X 6 CrNiTi 18 10 X 5 CrNi 18 12 , X 5 CrNiNb 18 9 X 2 CrNi 19 11 , X 6 CrNiNb 18 10 X 2 CrNiN 18 10 , G-X 5 CrNiNb 18 9 W.Nr. : 1.4301 , 1.4541 1.4303 , 1.4543 1.4306 , 1.4550 1.4311 , 1.4552
Welding current:
DC +
Welding positions:
ReL / Rp 0.2:
Rm: A5: KV : KV :
MPa(N/mm ) MPa(N/mm )
% J ( +20 C) J ( -20 C)
2
Date: 2009-06-10
V48
Classification: AWS A -5.22 : E 316L T0 1 : E 316L T0 4 EN ISO 17633-A :T19 12 3LR M/C5 EN ISO 17633-B :TS316L-F M/C0
d.o.o.
FILCORD 316 L
Base materials:
Art of steel Alloyed corrosion resistant DIN : X 5 CrNiMo 17 12 2 , X 6 CrNiMoTi 17 12 2 X 2 CrNiMo 17 13 2 , X 10 CrNiMoTi 18 12 X 2 CrNiMoN 17 12 2 , X 10 CrNiMoNb 18 10 X 2 CrNiMo 18 14 3 , G-X 5 CrNiMoNb 18 10 X 5 CrNiMo 17 13 3 , X 10 CrNiMoNb 18 12 W.Nr. : 1.4401 , 1.4571 1.4404 , 1.4573 1.4406 , 1.4580 1.4435 , 1.4581 1.4436 , 1.4583
Welding current:
DC +
Welding positions:
ReL / Rp 0.2:
Rm: A5: KV : KV :
MPa(N/mm ) MPa(N/mm )
% J ( +20 C) J ( -20 C)
2
Date: 2009-06-10
V49
Classification: AWS-SFA-5.22:
E 309L T0 1 E 309L T0 4 EN ISO 17633-A: T23 12LR M/C5 EN ISO 17633-B: TS309L-F M/C0
d.o.o.
FILCORD 309 L
Base materials:
Art of steel Heat resisting steels DIN : X 10 CrAl 7 , X 10 CrAl 13 X 10 CrAl 18 , G-X 40 CrNiSi 22 9 , X 15 CrNiSi 20 12 G-X 25 CrNiSi 20 14 , G-X 40 CrNiSi 25 12 W.Nr. : 1.4713 , 1.4724 1.4742 1.4826 , 1.4828 1.4832 , 1.4837
Welding current:
DC +
Welding positions:
ReL / Rp 0.2:
Rm: A5: KV : KV :
MPa(N/mm ) MPa(N/mm )
% J ( +20 C) J ( -20 C)
2
Date: 2009-06-10
V50
d.o.o.
FILCORD 307
Base materials:
Art of steel Alloyed corrosion resistant 14% Mn steels, Austenitic CrNiMn stainless steels Difficult to weld steels, buffering DIN : W.Nr. :
Welding current:
DC +
Welding positions:
ReL / Rp 0.2:
Rm: A5: KV :
Date: 2010-02-18
V51
Notes:
d.o.o.
KEY TO SYMBOLS
W.Nr.
Werkstoffnummer
Welding positions
s h
q f q f w
Type of current AC DC + DC alternating current direct current (electrode positive) direct current (electrode negative)
Mechanical properties of the all-weld-metal Rp 0.2% Rm A5 Av yield strength in N/mm 2 tensile strength in N/mm elongation in % impact enery Joule
2
d.o.o.
GUIDE TO APPROVALS
APPROVALS OF WELDING CONSUMABLES TV DB GL LR ABS BV DNV RINA RS PRS SZU CR S Technischer berwachungsverein Sddeutschland (Germany) Deutsche Bahn (German Railways) Germanischer Lloyd Lloyd's Register of Shipping American Bureau of Shipping Bureau Veritas Det Norske Veritas Registro Italiano Navale (Italy) Russian Maritime Register of Shipping (Russia) Polski Rejestr Statkow (Poland) Strojirensky Zkuebni Ustav v Brne (Czech Republic) Croatian Register of Shipping (Croatia) Slovenian Railways
Hydrogen level in weld metal of < 10 ml H2/100g (glycerine method) < 15 ml H2/100 g (mercury method) HH or H10 Hydrogen level in weld metal of < 5 ml H2/100 g (glycerine method) < 10 ml H2/100 g (mercury method) H5 Hydrogen level in weld metal of < 5 ml H2/100 g (mercury method) S or SA A T M TM approved for semi-automatic welding approved for automatic welding approved for the two-run technique e.g.butt weld with one pass each side approved for the multi-run technique (>two passes) approved for both two-run and multi-run technique
d.o.o.
Welding electrodes CELEX CELEX Mn RUTILEN 12 RUTILEN 13 RUTILEN Z RUTILEN 1000 S RUTILEN X RUTILEN 2000 S EMONA SAVA 150 SAVA 150 AR SAVA 200 EVB 50 EVB 55 EVB S EVB EXTRA EVB 60 EVB 62 EVB 75 EVB Ni EVB 2.5 Ni EVB Mo EVB CrMo EVB 2CrMo EVB CrMoV INOX R 19/9 NC INOX R 19/9 Nb INOX R 19/12/3 NC INOX R 22/12/3 Fe INOX R 25/14/3 NC INOX R 18/8/6 Fe Welding electrodes RUTILEN 12 RUTILEN 13 EMONA SAVA 150 AR SAVA 200 EVB 50 EVB S EVB 60 EVB 75 EVB Ni INOX R 19/9 NC INOX R 19/9 Nb INOX R 19/12/3 NC INOX R 22/12/3 Fe INOX R 29/9 INOX R 25/14/3 NC INOX B 18/8/6 E DUR 250 E DUR 300 E DUR 400
ABS
BV
GL
LR
DNV
1 2
1 2
2 1
1 2
1 2
3 3Y 2Y 4YHH
3 3Y 2Y 4YHH
3 3Y 4YH10
3 3Y 2Y 3/3YH
TV * * * * * * * * * * * * * *
DB
* * * * * * *
* * * *
3Y40 4Y62
3Y40HH
3Y40H15
* * * * * * * * * * SZU * * *
6Y50H10 * * * * * *
UP UP 316 L-17 309 Mo-16 UP CR 1 2 3 2Y 3YHH 3Y40 5Y69 5Y46 * * RS S/UIC * * * * * * * * * * * * * * * * * * RINA
3 3Y
3YHH
4 Y HH
3H10,4YH10 3H10,3Y40H10
* *
308L
d.o.o.
Welding rods and wires VAC 60 / C1 VAC 60 / M21 VAC 65 / C1 VAC 65 / M21 MIG 19/9 NC Si MIG 19/12/3 NC Si MIG 18/8/6 Si MIG 75 MIG 90 MIG Mo TIG 19/9 NC Si TIG 19/12/3 NC Si TIG Mo TIG CrMo TIG 2 CrMo TIG VAC 60 VP 37 VP 42 Welding rods and wires VAC 60 / M21 TIG Mo VP 42
ABS 3YSA
BV SA3YM
GL 3YS 3YS
LR 3S/3YS 3S/3YS
DNV IIIYMS
4Y69S *
UP
3/3Y
IIIYMS
CR 3YMS 3 GIII
RS
GIII S * * *
TV * * * * * * * * * * * * * * * * * *
DB * * * * * * * * *
RINA
W50 2 W2Mo
PRS 3S/3YS
Welding fluxes FILTUB 4 R / C 1 FILTUB 4 R / M 21 FILTUB 12 M FILTUN 12 B FILCORD 308 L FILCORD 316 L FILCORD 309 L
ABS 3YSA
BV SASYM
GL 3YS
LR 3S / 3YS
DNV IIIYMS
TV * * * * * * *
CR 3YS
Welding fluxes AB 100 / EPP2 / EPP3 AR 18.1 / EPP 2 AR D1 / EPP 2 FB TT / EPP 2 / EPP 3 / EPP 2 Mo FB 12.2 / EPP 2 / EPP3 FB 33 / EPP 19/9 NC Welding fluxes AB 100 / EPP2 / EPP3 AR 18.1 / EPP 2 AR D1 / EPP 2 FB TT / EPP 2 / EPP 3 / EPP 2 Mo FB 12.2 / EPP 2 / EPP3
TV
3M/3YM/3YT
* * *
Elongation min.% 22 20 20 20 18
Symbol 1 2 3 4 5
Welding position All positions All positions, except vertical down Flat butt weld, flat fillet weld, horizontalvertical fillet weld Flat butt weld, flat fillet weld Vertical down and positions according to symbol 3
Symbol 1 2 3 4 5 6 7 8
Metal recovery % < 105 < 105 > 105 125 > 105 125 > 125 160 > 125 160 > 160 > 160
Type of current AC + DC DC AC + DC DC AC + DC DC AC + DC DC
46
1 Ni
H5
Symbol A B C R RR RC RA RB
Coating type Acid Basic Cellulosic Rutile Rutile (thick coated) Rutile-Cellulosic Rutile-Acid Rutile-Basic
Symbol
Symbol Mn
Chemical composition * Mo Ni
Z A 0 2 3 4 5 6
No symbol 2.0 Mo 1.4 0.3 0.6 MnMo > 1.4 2.0 0.3 0.6 1Ni 1.4 0.6 1.2 2Ni 1.4 1.8 2.6 3Ni 1.4 > 2.6 3.8 Mn1Ni > 1.4 2.0 0.6 1.2 1NiMo 1.4 0.3 0.6 0.6 1.2 Z Any other agreed composition * If not specified Mo<0.2, Ni<0.3, Cr<0.2, V<0.05, Nb<0.05, Cu<0.3. Single values shown in the table mean maximum values.
d.o.o.
Minimum Minimum Minimum 1) proof strength tensile strength Post weld heat Elongation Rp0,2 Rm treatment A 2 2 N/mm N/mm % 2) 15 450 250 13 3) 15 750 500 13 4 4) 15 450 300 17 19 9 350 550 30 19 9 L 320 510 30 19 9 Nb 350 550 25 19 12 2 350 550 25 None 19 12 3 L 320 510 25 19 12 3 Nb 350 550 25 19 13 4 N L 350 550 25 22 9 3 N L 450 550 20 25 7 2 N L 500 700 15 None 25 9 3 Cu N L 550 620 18 25 9 4 N L 550 620 18 18 15 3 L 300 480 25 18 16 5 N L 300 480 25 20 25 5 Cu N L 320 510 25 None 20 16 3 Mn N L 320 510 25 25 22 2 N L 320 510 25 27 31 4 Cu L 240 500 25 18 8 Mn 350 500 25 18 9 Mn Mo 350 500 25 20 10 3 400 620 20 23 12 L 320 510 25 None 23 12 Nb 350 550 25 23 12 2 L 350 550 25 29 9 450 650 15 25 510 320 16 8 2 30 550 350 19 9 H 15 600 400 25 4 25 550 350 22 12 None 20 550 350 25 20 10 5) 550 350 25 20 H 550 350 36 18 10 5) 1) Gauge length is equal to five times the test specimen diameter. 2) 840C to 870C for 2 h Furnace cooling down to 600C then air cooling. 3) 580C to 620C tor 2 h Air cooling. 4) 760C to 790C for 2 h, furnace cooling down to 600C then air cooling. 5) These electrodes have high carbon in the all-weld metal for service at high temperatures. Room temperature elongation has little relevance to such applications. NOTE: All-weld metal can have elongation and toughness lower than those of the parent metal. Alloy symbol
E
Covered electrode for manual metal-arc welding
19 12 2
Type of electrode covering
4
Symbol for welding position
Symbol
Coating type
Symbol 1 2 3 4 5 6 7 8
R B
Rutile Basic
Weld metal recovery % 105 105 > 105 125 > 105 125 > 125 160 > 125 160 > 160 > 160
Type of current 1) 2) a.c. and d.c. d.c. a.c. and d.c. d.c. a.c. and d.c. d.c. a.c. and d.c. d.c.
Symbol 1 2 3 4 5
Welding position All positions All positions, except vertical down Flat butt weld, flat fillet weld, horizontal vertical fillet weld Flat butt weld, flat fillet weld Vertical down and positions according to symbol 3
d.o.o.
First digit 0 1 2 3 4 5
Impact Energy Temp. C for 28 J min. Not specified +20 0 -20 -30 -40
Second digit 0 1 2 3 4 5
Impact Energy Temp. C for 47 J min. Not specified +20 0 -20 -30 -40
51
32
Welding position 1 1 2(1) 1 1 2 1 2 1 2 2 2 2 2 1 1 2 2 4(3) 4(3) 4(3) 4(3)
RR11
Current Type 5 5 2 2 0+(6) 2 2 2 2 5 5 5 2 5 0+(6) 6 0+(6) 6 5 5 0+(6) 0+(6) Coating Type Acid Rutile Rutile Rutile-cellulosic Cellulosic Rutile Rutile-cellulosic Rutile Rutile-cellulosic Acid Acid-rutile Basic-rutile Rutile Basic-rutile Basic Basic + others Basic Basic + others Rutile Acid + rutile Basic Basic + others
190
Symbol A2 R2 R3 R(C)3 C4 RR5 RR(C)5 RR6 RR(C)6 A7 AR7 RR(B)7 RR8 RR(B)8 B9 B(R)9 B10 B(R)10 RR11 AR11 B12 B(R)12
Thickness Thin Thin Medium Medium Medium Thick Thick Thick Thick Thick Thick Thick Thick Thick Thick Thick Thick Thick Thick 105% recovery Thick 105% recovery Thick 120% recovery Thick 120% recovery
Symbol 1 2 3 4
Welding positions All positions All positions except vertical-down Flat butt and fillet, horizontal-vertical fillet Flat butt and fillet
80 7 8 9
d.o.o.
Designates an electrode (E7018M) for military requirements. Greater toughess, low moisture level and pick-up, and mandatory hydrogen limits for weld metal.
E E
70 70
18 16
M -1 HZ R
Designates that the electrode (E 7017, E 7018, E 7024) meets the requirements for improved toughness and ductility (E7024)
AWS Classification
Elongation min.%
Welding Position
Type of coating
Type of Current AC DC
E 6010 E 6011 E 6012 E 6013 E 6019 E 6020 E 6022 E 6027 E 7014 E 7015 E 7016 E 7016-1 E 7018 E 7018-1 E 7018 M E 7024 E 7027 E 7028 E 7048
60 60 60 60 60 60 60 60 70 70 70 70 70 70 a) 70 70 70 70 a) b) c)
414 414 414 414 414 414 414 414 482 482 482 482 482 482 482 482 482 482 482
48 48 48 48 48 48 Not spec. 48 58 58 58 58 58 58 b) 58 58 58 58
331 331 331 331 331 331 Not spec. 331 399 399 399 399 399 399 b) 399 399 399 399
2
22 22 17 17 22 22 Not spec. 22 17 22 22 22 22 22 24 17 22 22 22
27 / -29 27 / -29 Not spec. Not spec. 27 / -18 Not spec. Not spec. 27 / -29 Not spec. 27 / -29 27 / -29 27 / -46 27 / -29 27 / -46 67 / -29 Not spec. 27 / -29 27 / -29 27 / -29
1 1 1 1 1 2 2 2 1 1 1 1 1 1 1 2 2 2 4
Cellulosic Cellulosic Rutile Rutile Rutile/Acid Acid Acid Acid,high recovery Rutile,iron powder Basic Basic Basic Basic,iron powder Basic,iron powder Basic,iron powder Rutile, high recovery Acid,high recovery Basic,high recovery Basic,iron powder
x x x x x x x x x x x x x x x x
+ pol + pol - pol +/- pol +/- pol c) +/- pol - pol c) +/- pol +/- pol + pol + pol + pol + pol + pol + pol +/- pol c) +/- pol + pol + pol
Nominal value 70 ksi (482 N/mm ) 2 Limits are 53-72 ksi (365-496 N/mm ) 2 For 2,4 mm the limit is max.77 ksi (531 N/mm ) H-V fillets: - pol Code 1 2 4 Welding position All positions except vertical-down Flat and H-V fillets All positions but in the vertical, V-down only
In addition there are requirements on: Chemical composition of the weld metal Radiographic tests
F A M
MS CS CG CB CI IB ZS RS AR AB AS AF FB Z
1 2 3 4
Burn-out/Pickup Pick-up
5 6 7 8 9 6 7 8 9
CS
67
AC
H10
Properties of welding fluxes Symbol 1 Metalurgical behaviour -for welding and surfacing of unalloyed and lowalloyed steels (general structural, high tensile, some heat-resistant steels); there arent any alloying elements added, except Si and Mn - for welding and surfacing of Cr- in Cr-Ni stainless steel, heat-resistant steels and Ni and Ni-alloy - mainly for surfacing, (burn-out and pick-up of added elements according to table)
2 3
d.o.o.
Composition in volume %
Inert Reducing Unreactive
Application
Note
CO2 R 1 2 1 2 3 1 2 3 4 0 1 2 3 4 5 6 7 1 2 3 4 5 1 2 1 2 3 4 5 1
O2
Ar Rest 2 Rest 100 Rest 2 Rest 2 Rest 2 Rest 2 Rest 2 Rest 2 Rest 2 Rest 2 Rest 2 Rest 2 Rest 2 Rest 2 Rest 2 Rest 2 Rest 2 Rest 2 Rest 2 Rest 2 Rest
2
He
H2 0 15 15 50
N2
TIG-welding, plasma-welding and cutting, for root passes MIG, TIG, plasmawelding, for root passes Reducing
Inert
M1
Less oksidizing
0,5 3 0,5 3
M2
3 10 3 10 0,5 3 3 10 0,5 3 3 10
MAG
M3
10 15 2 10 10 15 10 15
More oksidizing
C N
0,5 10 0,5 50
Unreaktiv. Reducing
O Z
1 2
100
Gas mixture containing components not listed, or mixtures outside the composition ranges listed 1
) For the purpose of the classification, argon may be substituted partially or completely by helium. ) Two gas mixtures with the same Z-classification may not be interchangeable.
d.o.o.
EXAMPLE: ISO 2560 B E 55 18-N2 A U H5 ISO 2560-B: E: 55: 18: -N2: A: U: H5: the number of this International Standard, classification by tensile strength and 27 J impact energy covered electrode/manual metal arc welding tensile strength (see Table 1B) basic iron powder coating suitable for a.c. and d.c. (+), in all positions except vertical down (see Table 4B) 1% Ni as the principal alloying element (see Table 3B) as welded supplemental impact requirement of 47 J at the basic 27 J impact test temperature hydrogen content (see table 7)
Table 1B
Symbol 43 49 55 57 Minimum tensile strength 2 N/mm 430 490 550 570
Table 7
Symbol H5 H10 H15 Hydrogen content max. ml/100g of deposited weld metal 5 10 15
d.o.o.
Table 3B
Alloy symbol No symbol, -1 ali P1 -1M3 -3M2 -3M3 -N1 -N2 -N3 -3N3 -N5 -N7 -N13 -N2M3 -NC -CC -NCC Chemical composition Principal alloy Nominal element(s) level mas. % Mn Mo Mn Mo Mn Mo Ni Ni Ni Mn Ni Ni Ni 1 0,5 1,5 0,4 1,5 0,5 0,5 1 1,5 1,5 1,5 2,5 3,5
Symbol
Type of covering
Welding a positions
b
Type of current
03 10 11 12 13 14 15 16 18 19 20 24 27 28 40
rutile basic cellulosic cellulosic rutile rutile rutile + iron powder basic basic basic + iron powder Ilmenit iron oxide rutile + iron powder iron oxide + iron powder basic + iron powder not specified
all
AC in DC() DC(+) AC in DC(+) AC in DC(-) AC in DC() AC in DC() DC (+) AC in DC(+) AC in DC(+) AC in DC() AC in DC(-) AC in DC() AC in DC(-) AC in DC(+)
all
all all
b b
-NCC1
-NCC2 -G
Ni 6,5 1 Ni Mo 0,5 Ni 0,5 Cu 0,4 0,5 Cr Cu 0,4 Ni 0,2 Cr 0,6 Cu 0,5 Ni 0,6 Cr 0,6 Cu 0,5 Ni 0,3 Cr 0,2 Cu 0,5 Any other agreed composition
48
basic
NOTE A description of the characteristic of each of the types of covering is given in annex C Positions are defined in ISO 6947. PA = flat, PB =horizontal vertical fillet, PC = horizontal, PG = vertical down All positions may or may not include vertical down welding. This shall be specified in the manufacturers trade literature.
b a
d.o.o.
EXAMPLE: ISO 3580A E CrMo1 B4 4 H5 ISO 3580-A: E: CrMo1: B: 4: 4: H5: number of this International Standard and classification by chemical composition covered electrode/manual metal arc welding chemical composition of all-weld metal (see Table 1) is the type of electrode covering (see 4.4A) recovery and type of current (see 4A) is the welding position (Table 5) is the hydrogen content (see Table 6)
NOTE A description of the characteristics of each of the types of covering is given in Annex D.
Table 4A
Symbol 1 2 3 4
a b
Nominal electrode efficiency % u 105 u 105 > 105 and u 125 > 105 and u 125
Type of current
a, b
AC and DC DC AC and DC DC
AC means alternating current; DC means direct current In order to demonstrate operability on alternating current, tests shall be carried out with a no load voltage no higher than 65 V.
Table 5
Symbol 1 2 3 4
a
Table 6
Positions
a
PA, PB, PC, PD, PE, PF, PG PA, PB, PC, PD, PE, PF PA, PB PA, PB, PG
d.o.o.
Si
Mn
Cr
Mo
Other elements
0,80 0,80 0,80 0,80 0,80 0,30 to 0,60 0,80 0,80 0,80 1,00 0,80 0,80 1,00 0,80 1,00 1,00 0,60 0,60 0,80 0,90 0,90
0,40 to 1,50 1,00 0,40 to 1,50 0,40 to 1,50 0,90 0,40 to 0,70 0,40 to 1,50 0,90 0,40 to 1,50 0,90 0,70 to 1,50 0,40 to 1,30 0,90 0,40 to 1,30 0,90 0,90 0,40 to 1,50 0,40 to 1,50 0,40 to 1,50 1,00 1,00
0,030 0,030 0,030 0,030 0,030 0,030 0,030 0,030 0,030 0,030 0,030 0,030 0,030 0,030 0,030 0,030 0,030 0,030 0,025 0,030 0,030
0,025 0,030 0,025 0,025 0,030 0,030 0,025 0,030 0,025 0,030 0,025 0,025 0,030 0,025 0,030 0,030 0,030 0,030 0,025 0,030 0,030
0,2
0,40 to 0,70 0,40 to 0,65 0,80 to 1,20 0,40 to 0,65 0,40 to 0,65 1,00 to 1,25 0,45 to 0,70 0,40 to 0,65 0,45 to 0,70 0,40 to 0,65 0,90 to 1,30 0,90 to 1,30 0,90 to 1,20 0,90 to 1,30 0,90 to 1,20 0,40 to 0,65 0,90 to 1,20 0,90 to 1,20 0,40 to 0,70 0,45 to 0,65 0,45 to 0,65
0,03
0,30 to 0,60 0,40 to 0,65 0,40 to 0,65 0,40 to 0,60 0,90 to 1,40 1,00 to 1,50 0,90 to 1,40 1,00 to 1,50 0,90 to 1,30 2,0 to 2,6 2,00 to 2,50 2,0 to 2,6 2,00 to 2,50 1,75 to 2,25 2,00 to 2,60 2,60 to 3,40 4,0 to 6,0 4,0 to 6,0 4,0 to 6,0
0,25 to 0,60
(CM) CM C1M
0,05 to 0,12 0,05 to 0,12 0,07 to 0,15 0,05 to 0,12 0,05 to 0,12 0,05 0,05 0,05 to 0,15
0,05
0,10 to 0,35
0,05 to 0,12 0,05 to 0,12 0,05 0,05 0,05 0,05 to 0,15 0,05 to 0,15 0,03 to 0,12 0,05 to 0,10 0,05
CrMo5 (CrMo5)
d.o.o.
Chemical composition symbola for classification according to Chemical composition ISO 3580-Ad Tensile strength and chemical composition ISO 3580-Be (9C1M) 9C1M 9C1ML
Chemical composition, % b, c
Si
Mn
Cr
Mo
Other elements
CrMo9 (CrMo9)
0,15
Ni 1,0 Ni 0,40e Ni 0,40e Ni 0,40 to 1,00 Nb 0,03 to 0,10 N 0,02 to 0,07 Ni 1,0 Cu 0,25 Al 0,04 Nb 0,02 to 0,10 N 0,02 to 0,07 Ni 1,0 Cu 0,25 Al 0,04 Nb 0,02 to 0,10 N 0,02 to 0,07 Ni 0,8 W 0,40 to 0,60
CrMo91
(9C1MV)
0,60
0,025
0,025
0,15 to 0,30
(CrMo91)
9C1MV
0,08 to 0,13
0,30
1,25
0,01
0,01
8,0 to 10,5
0,85 to 1,20
0,15 to 0,30
(CrMo91)
9C1MV1
0,03 to 0,12
0,60
1,00 to 1,80
0,025
0,025
8,0 to 10,5
0,80 to 1,20
0,15 to 0,30
CrMoWV12 Z
a
0,15 to 0,22 G
0,80
0,40 to 1,30
0,025
0,025
10,0 to 12,0
0,80 to 1,20
0,20 to 0,40
A designation in parentheses [e.g., (CrMo1) or (1CM)] indicates a near match in the other designation system, but not an exact match. The correct designation for a given composition range is the one without parentheses. A given product may, by having a more restricted chemical composition which fulfils both sets of designation requirements, be assigned both designations independently, provided that the mechanical property requirements of Table 2 are also satisfied.
b c
The results shall be rounded to the same number of significant figures as in the specified value using the rule A in accordance with Annex B of ISO 31-0:1992.
d e
Elements listed without specified values shall be reported, if intentionally added. The total of these unspecified elements and all other elements found in the course of routine chemical analysis shall not exceed 0,50 %.
d.o.o.
EN ISO 3580 B
EXAMPLE: ISO 3580B E5518-1CM H5 ISO 3580-B: E: 55: 18: 1CM: H5: number of this International Standard and classification by tensile strength and chemical composition covered electrode/manual metal arc welding (see 4.1) deposited weld metal tensile strength (see 4.3B and Table 2) type of covering (see Table 3B) chemical composition of all-weld metal (see Table 1) hydrogen content (see Table 6)
4.3B Classification by tensile strength and chemical composition The symbol for tensile strength shall be 49 for 490 MPa minimum tensile strength, 52 for 520 MPa minimum tensile strength, 55 for 550 MPa minimum tensile strength or 62 for 620 MPa minimum tensile strength. The complete mechanical property requirements that shall be fulfilled by the various compositions are specified in Table 2. Table 3B
Symbol 10 c 11 c 13 15 16 18 19 20 27
a c c c c
Table 6
Type of covering cellulosic cellulosic rutile Welding a positions all all d all all d all all except PG d all PA, PB PA, PB
d
Type of b current
DC(+) AC DC(+) AC and DC() DC (+) AC and DC(+) AC and DC(+) AC and DC() AC and DC(-) AC and DC(-)
basic basic basic + metal powder Ilmenit iron oxide iron oxide + iron powder
Positions are defined in ISO 6947. PA = flat, PB =horizontal vertical fillet, PC = horizontal, PG = vertical down b AC means alternating current; DC means direct current c Composition designator 1M3 only. d All positions may or may not include vertical down welding. This shall be specified in the manufacturers trade literature.
d.o.o.
EN ISO 3580 B
Si
Mn
Cr
Mo
Other elements
0,80 0,80 0,80 0,80 0,80 0,30 to 0,60 0,80 0,80 0,80 1,00 0,80 0,80 1,00 0,80 1,00 1,00 0,60 0,60 0,80 0,90 0,90
0,40 to 1,50 1,00 0,40 to 1,50 0,40 to 1,50 0,90 0,40 to 0,70 0,40 to 1,50 0,90 0,40 to 1,50 0,90 0,70 to 1,50 0,40 to 1,30 0,90 0,40 to 1,30 0,90 0,90 0,40 to 1,50 0,40 to 1,50 0,40 to 1,50 1,00 1,00
0,030 0,030 0,030 0,030 0,030 0,030 0,030 0,030 0,030 0,030 0,030 0,030 0,030 0,030 0,030 0,030 0,030 0,030 0,025 0,030 0,030
0,025 0,030 0,025 0,025 0,030 0,030 0,025 0,030 0,025 0,030 0,025 0,025 0,030 0,025 0,030 0,030 0,030 0,030 0,025 0,030 0,030
0,2
0,40 to 0,70 0,40 to 0,65 0,80 to 1,20 0,40 to 0,65 0,40 to 0,65 1,00 to 1,25 0,45 to 0,70 0,40 to 0,65 0,45 to 0,70 0,40 to 0,65 0,90 to 1,30 0,90 to 1,30 0,90 to 1,20 0,90 to 1,30 0,90 to 1,20 0,40 to 0,65 0,90 to 1,20 0,90 to 1,20 0,40 to 0,70 0,45 to 0,65 0,45 to 0,65
0,03
0,30 to 0,60 0,40 to 0,65 0,40 to 0,65 0,40 to 0,60 0,90 to 1,40 1,00 to 1,50 0,90 to 1,40 1,00 to 1,50 0,90 to 1,30 2,0 to 2,6 2,00 to 2,50 2,0 to 2,6 2,00 to 2,50 1,75 to 2,25 2,00 to 2,60 2,60 to 3,40 4,0 to 6,0 4,0 to 6,0 4,0 to 6,0
0,25 to 0,60
(CM) CM C1M
0,05 to 0,12 0,05 to 0,12 0,07 to 0,15 0,05 to 0,12 0,05 to 0,12 0,05 0,05 0,05 to 0,15
0,05
0,10 to 0,35
0,05 to 0,12 0,05 to 0,12 0,05 0,05 0,05 0,05 to 0,15 0,05 to 0,15 0,03 to 0,12 0,05 to 0,10 0,05
CrMo5 (CrMo5)
d.o.o.
EN ISO 3580 B
Table 1 (continued)
Chemical composition symbola for classification according to Chemical composition ISO 3580-Ad Tensile strength and chemical composition ISO 3580-Be (9C1M) 9C1M 9C1ML
Chemical composition, % b, c
Si
Mn
Cr
Mo
Other elements
CrMo9 (CrMo9)
0,15
Ni 1,0 Ni 0,40e Ni 0,40e Ni 0,40 to 1,00 Nb 0,03 to 0,10 N 0,02 to 0,07 Ni 1,0 Cu 0,25 Al 0,04 Nb 0,02 to 0,10 N 0,02 to 0,07 Ni 1,0 Cu 0,25 Al 0,04 Nb 0,02 to 0,10 N 0,02 to 0,07 Ni 0,8 W 0,40 to 0,60
CrMo91
(9C1MV)
0,60
0,025
0,025
0,15 to 0,30
(CrMo91)
9C1MV
0,08 to 0,13
0,30
1,25
0,01
0,01
8,0 to 10,5
0,85 to 1,20
0,15 to 0,30
(CrMo91)
9C1MV1
0,03 to 0,12
0,60
1,00 to 1,80
0,025
0,025
8,0 to 10,5
0,80 to 1,20
0,15 to 0,30
CrMoWV12 Z
a
0,15 to 0,22 G
0,80
0,40 to 1,30
0,025
0,025
10,0 to 12,0
0,80 to 1,20
0,20 to 0,40
A designation in parentheses [e.g., (CrMo1) or (1CM)] indicates a near match in the other designation system, but not an exact match. The correct designation for a given composition range is the one without parentheses. A given product may, by having a more restricted chemical composition which fulfils both sets of designation requirements, be assigned both designations independently, provided that the mechanical property requirements of Table 2 are also satisfied. Single values shown in the table are maximum values.
b c
The results shall be rounded to the same number of significant figures as in the specified value using the rule A in accordance with Annex B of ISO 31-0:1992. If not specified: Ni < 0,3 %, Cu < 0,3 %, Nb < 0,01 %.
d e
Elements listed without specified values shall be reported, if intentionally added. The total of these unspecified elements and all other elements found in the course of routine chemical analysis shall not exceed 0,50 %.
d.o.o.
EN ISO 3580 B
MPa
MPa
Postweld heat treatment of test assembly Temperaturef C 570 to 620 605 to 645 605 to 645 690 to 730 600 to 650 675 to 705 675 to 705 660 to 700 675 to 705 675 to 705 660 to 700 675 to 705 680 to 730 690 to 750 675 to 705 675 to 705 690 to 750 675 to 705 675 to 705 725 to 755 725 to 755 730 to 760 725 to 755 725 to 755 740 to 780 725 to 755 725 to 755 750 to 770 Time min 60g 60h 60h 60g 60g 60h 60h 60g 60h 60h 60g 60h 60g 60g 60h 60h 60g 60h 60h 60g 60h 60g 60h 60h 120g 60h 60h 120 to 180
510 490 490 510 510 550 550 510 550 550 510 520 590 500 620 620 500 550 550 620 620 590 550 550 590 620 620 585
22 22 20 18 22 17 17 20 17 14 20 17 15 18 15 12 18 15 15 15 15 17 17 17 18 15 15 17
38 38 38 38 38 19 38 38 38 27 38
< 200 90 to 110 90 to 110 200 to 300 100 to 200 160 to 190 160 to 190 150 to 250 160 to 190 160 to 190 150 to 250 160 to 190 200 to 300 200 to 300 160 to 190 160 to 190 200 to 300 160 to 190 160 to 190 160 to 190 160 to 190 200 to 300 175 to 230 175 to 230 200 to 300 205 to 260 205 to 260 200 to 300
CrMo1 (CrMo1) (CrMo1) CrMo1L (CrMo1L) CrMoV1 CrMo2 (CrMo2) (CrMo2) CrMo2L (CrMo2L)
400 530 530 400 460 460 530 530 400 460 460 435 530 530 415
CrMo5 (CrMo5)
CrMo9 (CrMo9)
CrMo91
(62XX-9C1MV)
d.o.o.
EN ISO 3580 B
Table 2 (continued)
Minimum tensile strength Minimum d elongation Impact energy J at + 20 C Heat treatment of all-weld metal
Chemical composition symbola for classification according to Chemical composition ISO 3580-A Tensile strength and chemical composition ISO 3580-Bb 62XX-9C1MV 62XX-9C1MV1
MPa
MPa
Postweld heat treatment of test assembly Temperaturef C 725 to 755 725 to 755 740 to 780 Time min 60h 60h 120g
15 15 15
27
Z
a
A designation in parentheses [e.g., (CrMo1) or (1CM)] indicates a near match in the other designation system, but not an exact match. The correct designation for a given composition range is the one without parentheses. A given product may, by having a more restricted chemical composition that fulfils both sets of mechanical property requirements, be classified in both systems independently, provided that the chemical composition requirements of Table 1 are also satisfied. XX stands for coating types 15, 16 or 18. YY stands for coating types 10, 11, 19, 20 or 27. See Table 3B. For yield strength, the lower yield, ReL, shall be used when yielding occurs; otherwise the 0,2 % proof strength, Rp0,2, shall be used. Gauge length is equal to five times the test specimen diameter. Only one single value lower than the minimum average is permitted. The test assembly shall be cooled in the furnace to 300 C at a rate not exceeding 200 C/h. Tolerance shall be plus or minus 10 min. Tolerance shall be zero, plus 10 min. The heating rate in the furnace shall be 85 C to 275 C/h. Immediately after welding the specimen is to be allowed to cool down to 120 C to 100 C and kept at this temperature for at least
b c d e f g h i
1 h.
d.o.o.
EXAMPLE: ISO 17632A T 46 3 1Ni B M 1 H5 ISO 17632-A: T: 46: 3: 1Ni: B: M: 1: H5: is the number of this International Standard, with classification by yield strength and 47 J impacts indicates a tubular cored electrode/metal arc welding represents the tensile properties (see Table 1A) indicates impact property of 47 J, minimum (see Table 3) is the chemical composition of all-weld metal (see Table 4A) is the type of electrode core (see Table 5A) is the shielding gas is the welding position (see Table 6A) is the hydrogen content (see Table 7)
Table 1A
Symbol 35 38 42 46 50
a
Tensile strength
MPa
440 to 570 470 to 600 500 to 640 530 to 680 560 to 720
Minimum b elongation % 22 20 20 20 18
For yield strength the yield, ReL, is used when yielding occurs, otherwise the 0,2 % proof strength, Rp0,2, is used. b Gauge length is equal to five times the test specimen diameter.
Table 7
Symbol H5 H10 H15 Hydrogen content max. ml/100g of deposited weld metal 5 10 15
d.o.o.
Table 3
Symbol Z
b a c
Temperature for minimum average a, b c impact energy of 47 J or 27 J C No requirements +20 0 -20 -30 -40 -50 -60 -70 -80 -90 -100
Symbol 1 2 3 4 5
a
Welding positions
A or Y 0 2 3 4 5 6 7 8 9 10
a
b c
PA, PB, PC, PD, PE, PF & PG PA, PB, PC, PD, PE & PF PA & PB PA PA, PB & PG
PA = Flat position PB = Horizontal vertical position PC = Horizontal position PD = Horizontal overhead position PE = Overhead position PF = Vertical up position PG = Vertical down position
Only the symbol Z is used for electrodes for the single-run technique. Classification by yield strength and 47 J impact energy. Classification by tensile strength and 27 J impact energy.
Table 5A
Symbol R Characteristics Rutile, slowfreezing slag Rutile, fastfreezing slag Basic Types of weld Single and multiple pass Single and multiple pass Single and multiple pass Single and multiple pass Single and multiple pass Single and multiple pass Single and multiple pass Shielding gas Required
Required
Required
Metal powder Rutile or basic/fluoride Basic/fluoride, slow-freezing slag Basic/fluoride, fast-freezing slag Other types
Required
Not required
Not required
Y Z
Not required
d.o.o.
d.o.o.
EXAMPLE: ISO 17632B T554T5-1MA-N2-UH5 ISO 17632-B: T: 55: 4: T5: 1: M: A: N2: U: H5: is the number of this International Standard, with classification by tensile strength and 27 J impacts indicates a tubular cored electrode represents the tensile properties (see Table 1B) indicates impact properties of 27 J, minimum (see Table 3) is the usability designator (see Table 5B) is the welding position (see Table 6B) is the shielding gas indicates tested as-welded condition is the chemical composition of all-weld metal (see Table 4B) indicates (optional designator that the weld deposit in the as-welded condition will have impact properties of 47 J minimum at the classification test temperature is the hydrogen content (see Table 7)
Table 1B
Symbol 43 49 55 57
a
Tensile strength
MPa
Minimum b elongation % 20 18 17 17
For yield strength the yield, ReL, is used when yielding occurs, otherwise the 0,2 % proof strength, Rp0,2, is used. b Gauge length is equal to five times the test specimen diameter.
Table 7
Symbol H5 H10 H15 Hydrogen content max. ml/100g of deposited weld metal 5 10 15
d.o.o.
Table 3
Symbol Z
b a c
Temperature for minimum average a, b c impact energy of 47 J or 27 J C No requirements +20 0 -20 -30 -40 -50 -60 -70 -80 -90 -100
A or Y 0 2 3 4 5 6 7 8 9 10
a
b c
Only the symbol Z is used for electrodes for the single-run technique. Classification by yield strength and 47 J impact energy. Classification by tensile strength and 27 J impact energy.
Table 6B
Symbol 0 1
a
PA = Flat position PB = Horizontal vertical position PC = Horizontal position PD = Horizontal overhead position PE = Overhead position PF = Vertical up position PG = Vertical down position
d.o.o.
d.o.o.
d.o.o.
number of this International Standard and classification according to yield strength and impact energy of 47 J (C) welding process type gas-shielded metal arc welding tensile properties of all-weld metal (see Table 1) impact property requirements of all-weld metal (see Table 2) shielded gas (acc. to EN ISO 14175) chemical composition of wire (see Table 3)
Tensile strength
MPa
440 to 570 470 to 600 500 to 640 530 to 680 560 to 720
Minimum b elongation % 22 20 20 20 18
For yield strength the yield, ReL, is used when yielding occurs, otherwise the 0,2 % proof strength, Rp0,2, is used. b Gauge length is equal to five times the test specimen diameter.
Table 2
Symbol Z A or Y 0 2 3 4
a a b
Temperature for minimum average impact energy of 47 J No requirements +20 0 -20 -30 -40 5 6 7 8 9 10
a,b
Three specimen must reach average impact energy of 47J, only one of them min 32J . b Among five specimen the highest and the lowest values arent taken be in account; the average of other thee must be 27 J, only one them can be min 20J. .
d.o.o.
Si
Mn
Ni
Cr
Mo
Cu
Al
Ti+Zr
Any other defined requirements 0,06 to 0,50 to 0,90 to 0,14 0,80 1,30 0,06 to 0,70 to 1,30 to 0,14 1,00 1,60 0,06 to 1,00 to 1,30 to 0,14 1,30 1,60 0,06 to 0,80 to 1,60 to 0,14 1,20 1,90 0,04 to 0,40 to 0,90 to 0,14 0,80 1,40 0,08 to 0,30 to 0,90 to 0,14 0,50 1,30 0,06 to 0,50 to 1,00 to 0,14 0,90 1,60 0,06 to 0,40 to 0,80 to 0,14 0,80 1,40 0,08 to 0,30 to 0,90 to 0,12 0,70 1,30 0,06 to 0,50 to 1,70 to 0,14 0,80 2,10 0,025 0,025 0,025 0,025 0,025 0,025 0,020 0,020 0,020 0,025 0,025 0,025 0,025 0,025 0,025 0,025 0,020 0,020 0,020 0,025 0,15 0,15 0,15 0,15 0,15 0,15 0,80 to 1,50 2,10 to 2,70 0,15 0,15 0,15 0,15 0,15 0,15 0,15 0,15 0,15 0,15 0,15 0,15 0,15 0,15 0,15 0,15 0,15 0,15 0,15 0,15 0,40 to 0,60 0,40 to 0,60 0,03 0,03 0,03 0,03 0,03 0,03 0,03 0,03 0,03 0,03 0,35 0,35 0,35 0,35 0,35 0,35 0,35 0,35 0,35 0,35 0,02 0,02 0,02 0,02 0,15 0,15 0,15 0,15
0,05 to 0,05 to 0,20 0,25 0,35 to 0,75 0,02 0,02 0,02 0,02 0,15 0,15 0,15 0,15 0,15
If not specified: Cr < 0,15%; Cu < 0,35 %; V < 0,03 %. Copper from steel and copper from coating shall not exceed 0,35 % (mass). Single values shown in the table are maximum values. The results shall be rounded to the same number of significant figures as in the specified value using the rule A in accordance with Annex B of ISO 31-0:1992.
d.o.o.
number of this International Standard and classification according to tensile strength and impact energy of 27 J (C) welding process type gas-shielded metal arc welding tensile properties and elongation in as-welded condition (Table1) impact property requirements of as-welded condition (Table 2) shielded gas (acc. to EN ISO 14175) chemical composition of wire (Table 3)
Tensile strength
MPa
Minimum c elongation % 20 18 17 17
Instead of X: A results from testing in as-welded condition P - results from testing in heat-treatment condition. For yield strength the yield, ReL, is used when yielding occurs, otherwise the 0,2 % proof strength, Rp0,2, is used. c Gauge length is equal to five times the test specimen diameter.
Table 2
Symbol Z A or Y 0 2 3 4
a b a b
Temperature for minimum average impact energy of 47 J No requirements +20 0 -20 -30 -40 5 6 7 8 9 10
a,b
Three specimen must reach average impact energy of 47J, only one of them min 32J . Among five specimen the highest and the lowest values arent taken be in account; the average of other thee must be 27 J, only one them can be min 20J. .
d.o.o.
Any other defined requirements 0,030 0,035 0,035 0,035 0,035 0,030 0,030 0,030 0,030 0,030 0,030 0,030 0,030 0,025 0,025 0,025 0,025 0,025 0,025 0,025
0,50 0,50 0,50 0,50 0,50 0,50 0,50 0,50 0,50 0,50 0,50 0,50 0,50 0,35 0,50 0,50 0,50 0,50 0,50 0,40
0,05 to 0,15
0,02 to 0,30
0,02 to 0,15
0,02 to 0,30
Ti: 0,02 to 0,30
0,020
0,40 to 0,65 0,40 to 0,65 0,40 to 0,65 0,40 to 0,65 0,10 to 0,45 0,10 to 0,45 0,40 to 0,65
0,60 to 0,025 1,40 0,80 to 0,025 1,50 0,80 to 0,025 1,50 0,60 to 0,025 1,40 1,40 to 0,025 2,10 1,60 to 0,025 2,10
d.o.o.
C 0,12 0,12 0,12 0,12 0,12 0,12 0,12 0,10 0,12 0,12 0,12 0,12 0,12 0,12
Si 0,50 to 0,80 0,20 to 0,50 0,40 to 0,80 0,30 to 0,80 0,40 to 0,80 0,20 to 0,50 0,30 to 0,80 0,50 0,60 to 0,90 0,60 to 0,90 0,50 to 0,80 0,50 to 0,90 0,60 to 1,00 0,30 to 0,80 0,30 to 0,90 0,30 to 0,90 0,50 to 1,00
Mn
S 0,025 0,025 0,025 0,025 0,025 0,025 0,025 0,025 0,030 0,030 0,030 0,030 0,025 0,025 0,025 0,025 0,025
Ni
Cr
V
0,05
Cu 0,50 0,35 0,35 0,35 0,35 0,35 0,35 0,35 0,20 to 0,60 0,20 to 0,60 0,20 to 0,60 0,20 to 0,60 0,50 0,50 0,50 0,50 0,50
Al
Ti+Zr
Ti: 0,02 to 0,30
0,60 to 1,00 0,80 to 1,10 1,50 to 1,90 2,00 to 2,75 3,00 to 3,75 3,00 to 3,75 4,00 to 4,75 0,10 to 0,30 0,10 to 0,30 0,10 to 0,40 0,40 to 0,80 0,40 to 0,80 0,80 to 1,60 0,70 to 1,20 0,70 to 1,20 0,80 to 1,30
Ti: 0,02 to 0,30
0,15
1,20 to 0,025 1,60 1,25 1,25 1,25 1,40 0,025 0,025 0,025 0,025
1,00 to 0,030 1,65 1,10 to 0,030 1,65 1,20 to 0,030 1,80 1,10 to 0,030 1,70 1,70 to 0,025 2,30 1,10 to 0,025 1,90 1,10 to 0,025 1,80 1,40 to 0,025 2,10 1,70 to 0,025 2,30
0,20 to 0,60 0,10 to 0,45 0,20 to 0,60 0,40 to 0,65 0,55 to 0,85
The total of all other non-listed elements (except Fe) shall not exceed 0,50 %. Single values shown in the table are maximum values. The results shall be rounded to the same number of significant figures as in the specified value using the rule A in accordance with Annex B of ISO 31-0:1992.
d.o.o.
ISO 14343-A
International Standard number with classification according to the system A
ISO 14343-B
International Standard number with classification according to the system B
A wire electrode for gas-shielded arc welding, also applicable to submerged arc welding, has a chemical composition within the limits for the alloy symbol 20 10 3 and within the limits for the alloy symbol 308Mo of Table 1
ISO 14343-A - G 20 10 3
A rod for gas tungsten arc welding has a chemical composition within the limits for the alloy symbol 20 10 3 and within the limits for the alloy symbol 308Mo of Table 1
ISO 14343-A - G 19 12 3 L Si
A wire electrode for gas-shielded arc welding has a chemical composition within the limits for the alloy symbol 19 12 3 L Si and within the limits for the alloy symbol 316LSi.
G W P S L
- gas-shielded metal arc welding - gas tungsten arc welding - plasma arc welding - submerged arc welding - laser beam welding Table 1 Chemical composition of product
20 10 3 19 12 3 L Si
SS308Mo SS316LSi
d.o.o.
b,c
Si
Mn
Cr
NI
Mo
Cu
Nb
Other
0,08 0,12 0,15 0,12 0,05 0,05 0,06 0,25 to 0,40 0,12 0,10 0,10 0,02
0,8 0,5 1,0 0,5 1,0 1,0 0,5 0,5 1,0 0,5 0,5 0,5
0,8 0,6 1,0 0,6 1,0 1,0 0,6 0,6 1,0 0,6 0,6 0,8
0,03 0,03 0,03 0,03 0,03 0,03 0,03 0,03 0,03 0,03 0,03 0,03
0,03 0,03 0,02 0,03 0,02 0,02 0,03 0,03 0,02 0,03 0,03 0,02
10,5 to 13,5 10,5 to 13,5 12,0 to 15 11,5 to 13,5 12,0 to 15 11,0 to 14 11,0 to 12,5 12,0 to 14,0 16,0 to 19,0 15,5 to 17,0 15,5 to 17,0 17,8 to 18,8
0,6 0,6 0,3 0,6 0,3 3,0 to 5,0 4,0 to 5,0 0,75 0,3 0,6 0,6 0,3
0,5 0,75 0,3 0,75 0,3 0,4 to 1,0 0,4 to 0,7 0,75 0,3 0,75 0,75 0,3
0,75 0,75 0,3 0,75 0,3 0,3 0,75 0,75 0,3 0,3 0,3 0,3
Ti:10xC to 1,5
8 x C to 1,0
(410) 410
410NiMo
8 x C to 1,2
0,05+7(C +N) up to 0,5
0,02
Austenitic types 308 308Si 19 9L (19 9L) 19 9LSi (19 9LSi) (308L) 308L
(308LSi)
0,65
1,0 to 2,5
19,5 to 22,0 19,5 to 22,0 19,5 to 22,0 19,5 to 22,0 19,0 to 21,0 19,5 to 22,0
9,0 to 11,0 9,0 to 11,0 9,0 to 11,0 9,0 to 11,0 9,0 to 11,0 9,0 to 11,0
0,65 to 1,0 to 1,00 2,5 0,65 0,65 1,0 to 2,5 1,0 to 2,5
308LSi
d.o.o.
Table 1 (continued)
Alloy designation for classification acc. to Alloy Type Nominal f composition ISO 14343-A 19 9Nb (19 9Nb) 19 9NbSi (19 9NbSi)
ISO 14343B
a
b,c
Si
Mn
Cr
NI
Mo
Cu
Nb
Other
0,08 0,08 0,08 0,08 0,03 0,08 0,08 0,03 0,03 0,03 0,03 0,03 0,08 0,08 0,03 0,08
0,65 0,65
0,03 0,03 0,03 0,03 0,03 0,03 0,03 0,03 0,03 0,03 0,03 0,03 0,03 0,03 0,03 0,03 0,03 0,03 0,03
0,02 0,03 0,02 0,03 0,03 0,03 0,03 0,02 0,03 0,02 0,03 0,03 0,02 0,03 0,03 0,02 0,03 0,03 0,03
19,0 to 21,0 19,0 to 21,5 19,0 to 21,0 19,0 to 21,5 19,0 to 21,5 18,0 to 20,0 18,0 to 20,0 18,0 to 20,0 18,0 to 20,0 18,0 to 20,0 18,0 to 20,0 18,0 to 20,0 18,0 to 20,0 18,0 to 20,0 18,0 to 20,0 18,0 to 20,0 18,5 to 20,5 18,5 to 20,5 18,5 to 20,5
9,0 to 11,0 9,0 to 11,0 9,0 to 11,0 9,0 to 11,0 9,0 to 11,0 11,0 to 14,0 11,0 to 14,0 11,0 to 14,0 11,0 to 14,0 11,0 to 14,0 11,0 to 14,0 11,0 to 14,0 11,0 to 14,0 11,0 to 14,0 11,0 to 14,0 11,0 to 14,0 13,0 to 15,0 13,0 to 15,0 9,0 to 10,5
0,3 0,75 0,3 0,75 0,75 2,0 to 3,0 2,0 to 3,0 2,5 to 3,0 2,0 to 3,0 2,5 to 3,0 2,0 to 3,0 2,0 to 3,0 2,5 to 3,0 2,0 to 3,0 2,0 to 3,0 2,5 to 3,0 3,0 to 4,0 3,0 to 4,0 0,75
0,3 0,75 0,3 0,75 0,75 0,75 0,75 0,3 0,75 0,3 0,75 1,0 to 2,5 0,3 0,75 0,75 0,3 0,75 0,75 0,75
0,65 to 1,0 to 1,2 2,5 0,65 to 1,0 to 1,0 2,5 0,65 0,65 1,0 to 2,5 1,0 to 2,5
0,65 to 1,0 to 1,0 2,5 0,65 0,65 1,0 to 2,5 1,0 to 2,5
19 12 3 L (19 12 3 L) 19 12 3 LSi
(19 12 3 LSi)
(316L) 316L
(316LSi)
0,65 to 1,0 to 1,2 2,5 0,65 to 1,0 to 1,0 2,5 0,65 0,65 0,65 0,65 1,0 to 2,5 1,0 to 2,5 1,0 to 2,5 1,0 to 2,5
316LSi 316LCu
19 12 3 Nb
(19 12 3 Nb)
19 12 3 NbSi
0,65 to 1,0 to 1,2 2,5 0,65 0,65 0,65 1,0 to 2,5 1,0 to 2,5 1,0 to 2,5
d.o.o.
Table 1 (continued)
Alloy designation for classification acc. to Alloy Type Nominal f composition ISO 14343-A
ISO 14343B
a
Si
Mn
Cr
NI
Mo
Cu
Nb
Other
Ferritic-austenitic types, sometimes referred to as austenitic-ferritic types 22 9 3 NL (22 9 3 NL) 25 7 2 L 25 9 3CuNL 25 9 4NL Fully austenitic types 18 15 3L
f
f
(2209) 2209
21,0 to 24,0 21,5 to 23,5 24,0 to 27,0 24,0 to 27,0 24,0 to 27,0
7,0 to 10,0 7,5 to 9,5 6,0 to 8,0 8,0 to 11,0 8,0 to 10,5
2,5 to 0,10 to 0,20 4,0 2,5 to 0,08 to 0,20 3,5 1,5 to 2,5
2,5 to 0,10 to 1,5 to 0,20 4,0 2,5 2,5 to 0,20 to 0,30 4,5 1,5
W 1,0
(317)
f
0,03 0,03
f
1,0 1,0 1,0 1,0 1,0 0,50 1,0 1,0 1,0 1,0 1,0 0,50 0,60 0,15
1,0 to 4,0 1,0 to 4,0 1,0 to 5,0 1,0 to 5,0 1,0 to 4,0 1,0 to 2,5 1,0 to 4,0 5,0 to 9,0 5,0 to 9,0 3,5 to 6,5 1,0 to 3,0 1,0 to 2,5 2,5
0,03 0,03 0,03 0,03 0,03 0,02 0,03 0,03 0,03 0,03 0,03 0,02 0,03
0,02 0,02 0,02 0,02 0,02 0,03 0,02 0,02 0,02 0,02 0,02 0,03 0,03
17,0 to 20,0 17,0 to 20,0 17,0 to 20,0 17,0 to 20,0 19,0 to 22,0 19,5 to 21,5 19,0 to 22,0 19,0 to 22,0 19,0 to 22,0 24,0 to 27,0 26,0 to 29,0 26,5 to 28,5 19,0 to 21,0 19,0 to 21,0
13,0 to 16,0 16,0 to 19,0 12,0 to 15,0 12,0 to 15,0 24,0 to 27,0 24,0 to 26,0 24,0 to 27,0 15,0 to 18,0 15,0 to 18,0 21,0 to 24,0 30,0 to 33,0 30,0 to 33,0 32,0 to 36,0 32,0 to 36,0
2,5 to 4,0
18 16 5NL 19 13 4L
f
(317) (317L)
0,03 0,03
19 13 4NL 20 25 5CuL
(20 25 5CuL)
(385) 385
f
20 25 5CuNL 20 16 3 MnL
20 16 3 MnNL
0,03 0,03
2,5 to 0,10 to 0,20 4,5 1,5 to 0,10 to 0,20 3,0 3,0 to 4,5 3,2 to 4,2 2,0 to 3,0 2,0 to 3,0
25 22 2 N L 27 31 4 Cu L
f
(27 31 4 Cu L)
320LR
0,025
Table 1 (continued)
d.o.o.
Alloy designation for classification acc. to Alloy Type Nominal f composition ISO 14343-A
ISO 14343B
Si
Mn
Cr
NI
Mo
Cu
Nb
Other
3,3 to 4,8 5,0 to 8,0 1,0 to 2,5 1,0 to 2,5 1,0 to 2,5 1,0 to 2,5 1,0 to 2,5
0,03 0,03 0,03 0,03 0,03 0,03 0,03 0,03 0,03 0,03 0,03 0,03 0,03 0,03 0,03 0,03
0,03 0,03 0,02 0,02 0,03 0,02 0,02 0,02 0,02 0,02 0,03 0,03 0,02 0,03 0,02 0,03
19,5 to 22,0 17,0 to 20,0 18,0 to 21,0 18,0 to 21,0 18,0 to 21,0 22,0 to 25,0 23,0 to 25,0 22,0 to 25,0 23,0 to 25,0 22,0 to 25,0 23,0 to 25,0 23,0 to 25,0 21,0 to 25,0 23,0 to 25,0 28,0 to 32,0 28,0 to 32,0
8,0 to 10,7 7,0 to 10,0 8,0 to 12,0 9,0 to 12,0 9,0 to 12,0 11,0 to 14,0 12,0 to 14,0 11,0 to 14,0 12,0 to 14,0 11,0 to 14,0 12,0 to 14,0 12,0 to 14,0 11,0 to 15,5 12,0 to 14,0 8,0 to 12,0 8,0 to 10,5
0,5 to 1,5 0,3 1,5 to 3,5 2,0 to 3,0 2,0 to 3,0 0,3 0,75 0,3 0,75 0,3 0,75 2,0 to 3,0 2,0 to 3,5 2,0 to 3,0 0,3 0,75
0,75 0,3 0,3 0,75 0,75 0,3 0,75 0,3 0,75 0,3 0,75 0,75 0,3 0,75 0,3 0,75
(308Mo)
308Mo 308LMo
(309L) 309L
(309LSi)
0,65 to 1,0 to 1,2 2,5 0,65 to 1,0 to 1,0 2,5 1,0 0,65 0,65 1,0 0,65 1,0 0,65 1,0 to 2,5 1,0 to 2,5 1,0 to 2,5 1,0 to 2,5 1,0 to 2,5 1,0 to 2,5 1,0 to 2,5
309LSi
10 x C to 1,0 10 x C to 1,0
Table 1 (continued)
d.o.o.
Alloy designation for classification acc. to Alloy Type Nominal f composition ISO 14343-A (19 9 H) (19 9 H) 19 12 3 H (19 12 3 H) 22 12 H (22 12 H)
ISO 14343B
Si
Mn
Cr
NI
Mo
Cu
Nb
Other
0,04 to 0,08 0,04 to 0,08 0,04 to 0,08 0,04 to 0,08 0,04 to 0,15 0,12 0,12 0,15
1,0 to 2,0 1,0 to 2,5 1,0 to 2,5 1,0 to 2,5 1,0 to 2,5 1,0 to 2,5
0,03 0,03 0,03 0,03 0,03 0,03 0,03 0,03 0,03 0,03 0,03 0,03 0,03 0,03 0,03 0,03
0,03 0,03 0,02 0,03 0,02 0,03 0,03 0,02 0,02 0,03 0,03 0,03 0,02 0,02 0,02 0,03
18,5 to 20,0 19,5 to 22,0 18,0 to 20,0 18,0 to 20,0 21,0 to 24,0 23,0 to 25,0 23,0 to 25,0 24,0 to 27,0 24,0 to 27,0 25,0 to 28,0 25,0 to 28,0 25,0 to 28,0 24,0 to 27,0 24,0 to 27,0 15,0 to 19,0 15,0 to 17,0
9,0 to 11,0 9,0 to 11,0 11,0 to 14,0 11,0 to 14,0 11,0 to 14,0 12,0 to 14,0 12,0 to 14,0 4,0 to 6,0 18,0 to 22,0 20,0 to 22,5 20,0 to 22,5 20,0 to 22,5 18,0 to 22,0 18,0 to 22,0 33,0 to 37,0 34,0 to 37,0
0,25 0,50 2,0 to 3,0 2,0 to 3,0 0,3 0,75 0,75 0,3 0,3 0,75 0,75 0,75 0,3 0,3 0,3 0,75
0,75 0,75 0,3 0,75 0,3 0,75 0,75 0,3 0,3 0,75 0,75 0,75 0,3 0,3 0,3 0,75
0,05
Ti 0,05
0,65 to 1,0 to 1,0 2,5 2,0 2,0 0,65 0,65 0,65 2,0 2,0 1,0 to 2,5 1,0 to 2,5 1,0 to 2,5 1,0 to 2,5 1,0 to 2,5 1,0 to 2,5 2,5 to 5,0 1,0 to 2,5 1,0 to 2,5
25 4 25 20
f
(310)
f
(25 20)
310
310S 310L 25 20 H
f
25 20 Mn 18 36 H
f
(18 36 H)
330
Table 1 (continued)
d.o.o.
Alloy designation for classification acc. to Alloy Type Nominal f composition ISO 14343-A
ISO 14343B
b,c
Si
Mn
Cr
NI
Mo
Cu
Nb
Other
Precipitation hardening type 630 0,05 0,75 0,25 to 0,03 0,75 0,03 16,0 to 16,75 4,5 to 5,0 0,75
a A designation in parentheses e.g. (308L) or (19/9L) indicates a near match in the other designation system, but not an exact match. The correct designation for a given composition range is the one not in parentheses. A given product may, by having a more restricted chemical composition which fulfils both sets of designation requirements, be assigned both designations independently. b c
The results shall be rounded to the same number of significant figures as in the specified value using the rule A in accordance with Annex B of ISO 31-0:1992.
d e f
Wire electrodes not listed in the table shall be symbolisied similarly and prefixed by the letter Z. Up to 20% of the amount of Nb can be replaced by Ta.
The all-weld metal is in most cases fully austenitic and therefore can be susceptible to microfissuring or hot cracking. The occurrence of fissuring/cracking is reduced by increasing the weld metal Mn-level and in recognition of this the Mn-range is extended for a number of grades.
d.o.o.
EXAMPLE 1: ISO 16834A G 62 6 M Mn4Ni1Mo ISO 16834-A: G: 62: 6: M: Mn4Ni1Mo: EXAMPLE 2: ISO 16834A W 55 6 Mn4Ni1MoT ISO 16834-A: W: 55: 6: Mn4Ni1Mo: T Table 1
Symbol G W Welding process type
number of this International Standard and classification according to yield strength and impact energy of 47 J (C) welding process type gas-shielded metal arc welding (Table 1) tensile properties of all-weld metal (Table 2) impact property requirements of all-weld metal (Table 3) shielded gas (Table 4) chemical composition of wire (Table 5)
number of this International Standard and classification according to yield strength and impact energy of 47 J (C) welding process type gas-shielded metal arc welding (Table 1) tensile properties of all-weld metal (Table 2) impact property requirements of all-weld metal (Table 3) chemical composition of wire (Table 5) All-weld metal values in heat treatment condition
Table 2
Symbol 55 62 69 79 89
a b
Tensile strength
MPa
640 to 820 700 to 890 770 to 940 880 to 1080 940 to 1180
Minimum b elongation % 18 18 17 16 15
For yield strength the yield, ReL, is used when yielding occurs, otherwise the 0,2 % proof strength, Rp0,2, is used. Gauge length is equal to five times the test specimen diameter.
d.o.o.
Si
Mn
Ni
Cr
Mo
Cu
Other elements
Any other defined requirements 0,14 0,12 0,12 0,08 0,12 0,12 0,12 0,12 0,12 0,12 0,12 0,13 0,60 to 0,80 0,40 to 0,70 0,40 to 0,80 0,20 to 0,60 0,20 to 0,60 0,20 to 0,60 0,40 to 0,70 0,50 to 0,80 0,25 to 0,60 0,50 to 0,80 0,60 to 0,90 0,50 to 0,80 1,30 to 1,80 1,30 to 1,80 1,30 to 1,90 1,30 to 1,80 1,20 to 1,80 1,20 to 1,80 1,30 to 1,80 1,60 to 2,10 1,60 to 2,10 1,60 to 2,10 1,60 to 2,10 1,60 to 2,10 0,015 0,015 0,015 0,015 0,015 0,015 0,015 0,015 0,015 0,015 0,015 0,015 0,018 0,018 0,018 0,018 0,018 0,018 0,018 0,018 0,018 0,018 0,018 0,018 0,50 to 0,65 1,20 to 1,60 0,80 to 1,30 1,40 to 2,10 0,80 to 1,25 0,80 to 1,25 2,30 to 2,80 0,80 to 1,25 2,00 to 2,60 1,30 to 1,90 1,80 to 2,30 2,30 to 2,80 0,40 to 0,65 0,20 to 0,40 0,15 0,15 0,15 0,15 0,20 to 0,60 0,15 0,15 0,15 to 0,40 0,20 to 0,45 0,20 to 0,60 0,15 to 0,30 0,20 to 0,30 0,25 to 0,65 0,25 to 0,55 0,20 0,20 to 0,55 0,30 to 0,65 0,20 to 0,55 0,30 to 0,65 0,30 to 0,65 0,45 to 0,70 0,30 to 0,65 0,30 0,35 0,30 0,30 0,30 to 0,65 0,30 to 0,65 0,30 0,30 0,30 0,30 0,30 0,30 0,03 0,05 to 0,13 0,03 0,03 0,03 0,03 0,03 0,03 0,03 0,03 0,03 0,03 0,25 0,25 0,25 0,25 0,25 0,25 0,25 0,25 0,25 0,25 0,25 0,25
If not specified:: Ti < 0,10%; Zr < 0,10%; Al < 0,12 %. Copper from steel and copper from coating shall not exceed the stated value . Single values shown in the table are maximum values.
d.o.o.
Table 3
Symbol Z A or Y 0 2
a b a b
a,b
Three values must reach average impact energy of 47J, only one of them min 32J . Among five values the highest and the lowest values arent taken be in account; the average of other thee must be 27 J, only one them can be min 20J. .
Table 4
Symbol M A C G Shielded gas Mixture: Ar+ 20-25% CO2 (without He) Mixture Ar + 1-5% O2 CO2 Other gas, defined between supplier and customer
d.o.o.
Table 1
Symbol G W Welding process type
Table 4
Symbol M A C G Shielded gas Mixture: Ar+ 20-25% CO2 (without He) Mixture Ar + 1-5% O2 CO2 Other gas, defined between supplier and customer
d.o.o.
Table 2
Symbol 59X 62X 69X 76X 78X 83X
a a
590 to 790 620 to 820 690 to 890 760 to 960 780 to 980 830 to 1030
Minimum c elongation % 16 15 14 13 13 12
Instead of X: A - as-welded condition P - heat-treatment condition AP - from both conditions b For yield strength the yield, ReL, is used when yielding occurs, otherwise the 0,2 % proof strength, Rp0,2, is used. c Gauge length is equal to five times the test specimen diameter.
Table 3
Symbol Z A or Y 0 2 3 4
a b a b
Temperature for minimum average impact energy of 47 J No requirements +20 0 -20 -30 -40 5 6 7 8 9 10
a,b
Three values must reach average impact energy of 47J, only one of them min 32J . Among five values the highest and the lowest values arent taken be in account; the average of other thee must be 27 J, only one them can be min 20J. .
Table 5 Symbol for chemical composition of wires Chemical composition in % (m/m) a,b
Symbol C Si Mn P S Ni Cr Mo Cu Ti
Any other analyses not defined in this International Norm 2M3 3M1 3M1T 3M3 3M31 3M3T 0,12 0,05 to 0,15 0,12 0,12 0,12 0,12 0,30 to 0,70 0,40 to 1,00 0,40 to 1,00 0,60 to 0,90 0,30 to 0,90 0,40 to 1,00 0,60 to 1,40 1,40 to 2,10 1,40 to 2,10 1,10 to 1,60 1,00 to 1,85 1,00 to 1,85 0,025 0,025 0,025 0,025 0,025 0,025 0,025 0,025 0,025 0,025 0,025 0,025
0,40 to 0,65 0,10 to 0,45 0,10 to 0,45 0,40 to 0,65 0,40 to 0,65 0,40 to 0,65
0,02 to 0,30
0,02 to 0,30
d.o.o.
Table 5 (continued)
Symbol C 4M3 4M31 4M3T N1M2T N1M3 N2M1T N2M2T N2M3 N2M3T N2M4T N3M2 c N4M2d N4M3T N4M4T N5M3 e N5M3T N7M4T C1M1T N3C1M4T N4CM2T N4CM21T N4CM22T 0,12 0,05 to 0,15 0,12 0,12 0,12 0,12 0,05 to 0,15 0,12 0,05 to 0,15 0,12 0,08 0,09 0,12 0,12 0,10 0,12 0,12 0,02 to 0,15 0,12 0,12 0,12 0,12 Si 0,30 0,50 to 0,80 0,50 to 0,80 0,60 to 1,00 0,20 to 0,80 0,30 to 0,80 0,30 to 0,90 0,30 0,30 to 0,90 0,50 to 1,00 0,20 to 0,55 0,20 to 0,55 0,45 to 0,90 0,40 to 0,90 0,25 to 0,60 0,40 to 0,90 0,30 to 0,70 0,50 to 0,90 0,35 to 0,75 0,20 to 0,60 0,20 to 0,70 0,65 to 0,95 Mn 1,50 to 2,00 1,60 to 2,10 1,60 to 2,20 1,70 to 2,30 1,00 to 1,80 1,10 to 1,90 1,00 to 1,80 1,10 to 1,60 1,40 to 2,10 1,70 to 2,30 1,25 to 1,80 1,25 to 1,80 1,40 to 1,90 1,60 to 2,10 1,40 to 1,80 1,40 to 2,00 1,30 to 1,70 1,10 to 1,60 1,25 to 1,70 1,30 to 1,80 1,10 to 1,70 1,90 to 2,40
Cr
Mo 0,40 to 0,65 0,40 to 0,65 0,40 to 0,65 0,20 to 0,60 0,40 to 0,65 0,10 to 0,45 0,20 to 0,60 0,40 to 0,65 0,40 to 0,65 0,55 to 0,85 0,25 to 0,55 0,25 to 0,55 0,40 to 0,65 0,40 to 0,90 0,35 to 0,56 0,40 to 0,70 0,60 to 0,90 0,10 to 0,45 0,50 to 0,75 0,30 to 0,60 0,25 to 0,60 0,35 to 0,55
Cu 0,50 0,40 0,50 0,50 0,50 0,50 0,50 0,50 0,50 0,50 0,25 0,25 0,50 0,50 0,25 0,50 0,50 0,40 0,50 0,50 0,50 0,50
Ti
0,40 to 0,80 0,30 to 0,90 0,80 to 1,60 0,70 to 1,20 0,80 to 1,20 0,70 to 1,20 0,80 to 1,30 1,40 to 2,10 1,40 to 2,10 1,50 to 2,10 1,90 to 2,50 2,00 to 2,80 2,40 to 3,10 3,20 to 3,80
0,02 to 0,30 0,02 to 0,30 0,10 0,10 0,01 to 0,30 0,02 to 0,30 0,10 0,02 to 0,30 0,02 to 0,30 0,02 to 0,30 0,02 to 0,30 0,02 to 0,30 0,02 to 0,30 0,02 to 0,30
0,30 0,30
0,60
0,30 0,30 to 0,60 0,30 to 0,60 0,20 to 0,50 0,05 to 0,35 0,10 to 0,30
d.o.o.
Table 5 (continued)
Symbol C N5CM3T N5C1M3T N6CM2T N6C1M4 N6C2M2T N6C2M4 N6CM3T
a b c d e
The total of all other non-listed elements (except Fe) shall not exceed 0,50 %. Single values shown in the table are maximum values.
V 0,05; Zr 0,10; V 0,04; Zr 0,10; V 0,03; Zr 0,10; AL 0,10 AL 0,10 AL 0,10
d.o.o.
number of this International Standard and classification according to yield strength and impact energy of 47 J (C) welding process type gas tungsten arc welding tensile properties of all-weld metal (Table 1) impact property requirements of all-weld metal (Table 2) chemical composition of wire (see Table 3)
Tensile strength
MPa
440 to 570 470 to 600 500 to 640 530 to 680 560 to 720
Minimum b elongation % 22 20 20 20 18
For yield strength the yield, ReL, is used when yielding occurs, otherwise the 0,2 % proof strength, Rp0,2, is used. b Gauge length is equal to five times the test specimen diameter.
Table 2
Symbol Z A or Y 0 2 3 4
a b a b
Temperature for minimum average impact energy of 47 J No requirements +20 0 -20 -30 -40 5 6 7 8 9 10
a,b
Three specimen must reach average impact energy of 47J, only one of them min 32J . Among five specimen the highest and the lowest values arent taken be in account; the average of other thee must be 27 J, only one them can be min 20J. .
d.o.o.
0,05 to 0,05 to 0,20 0,25 0,02 0,02 0,02 0,15 0,15 0,15
Single values shown in the table are maximum values. The results shall be rounded to the same number of significant figures as in the specified value using the rule A in accordance with Annex B of ISO 31-0:1992.
d.o.o.
number of this International Standard and classification according to tensile strength and impact energy of 27 J (C) welding process type gas tungsten arc welding tensile properties and elongation in as-welded condition (Table1) impact property requirements of as-welded condition (Table 2) chemical composition of wire (Table 3)
Tensile strength
MPa
Minimum c elongation % 20 18 17 17
Instead of X: A - values from testing in as-welded condition P - values from testing in heat-treatment condition. For yield strength the yield, ReL, is used when yielding occurs, otherwise the 0,2 % proof strength, Rp0,2, is used. Gauge length is equal to five times the test specimen diameter.
Table 2
Symbol Z A or Y 0 2 3 4
a b a b
Temperature for minimum average impact energy of 47 J or 27 J (C) No requirements +20 0 -20 -30 -40 5 6 7 8 9 10 -50 -60 -70 -80 -90 -100
Classification according to yield strength and impact energy of 47J; Classification according to tensile strength and impact energy of 47J.
d.o.o.
Any other defined requirements 0,035 0,035 0,035 0,035 0,030 0,030 0,025 0,025 0,025 0,025 0,025 0,025 0,025 0,025 0,025 0,025 0,025 0,025 0,025 0,025
0,50 0,50 0,50 0,50 0,50 0,50 0,35 0,50 0,50 0,50 0,50 0,50 0,50 0,50 0,50 0,35 0,35 0,35 0,35 0,35
0,05 to 0,15
0,05
Ti: 0,02 to 0,30
0,020
0,40 to 0,65 0,40 to 0,65 0,40 to 0,65 0,40 to 0,65 0,10 to 0,45 0,40 to 0,65 0,40 to 0,65 0,40 to 0,65 0,40 to 0,65 0,35 0,35 0,35
0,35
0,60 to 0,025 1,40 0,80 to 0,025 1,50 0,80 to 0,025 1,40 1,40 to 0,025 2,10 1,10 to 0,025 1,60 1,50 to 0,025 2,00 1,60 to 0,025 2,10 1,60 to 0,025 2,20 1,25 1,25 0,025 0,025
Ti: 0,02 to 0,30
0,60 to 1,00 0,80 to 1,10 1,50 to 1,90 2,00 to 2,75 3,00 to 3,75
0,15
d.o.o.
C 0,12 0,10 0,12 0,12 0,12 0,12 0,12 0,12 0,12 0,12
Si 0,40 to 0,80 0,50 0,60 to 0,90 0,20 to 0,40 0,60 to 0,90 0,50 to 0,80 0,50 to 0,90 0,60 to 1,00 0,20 to 0,80 0,30
Mn 1,25 1,40
P 0,025 0,025
S 0,025 0,025 0,030 0,030 0,030 0,030 0,030 0,025 0,025 0,025
Ni 3,00 to 3,75 4,00 to 4,75 0,10 to 0,30 0,50 to 0,80 0,10 to 0,30 0,10 to 0,40 0,40 to 0,80 0,40 to 0,80 0,30 to 0,90 0,80 to 1,20
Cr
Mo
0,35
Cu 0,35 0,35 0,20 to 0,60 0,30 to 0,75 0,20 to 0,60 0,20 to 0,60 0,20 to 0,60 0,50 0,50 0,50
Al
Ti+Zr
Ti: 0,02 to 0,30
1,00 to 0,030 1,65 0,40 to 0,030 0,70 1,00 to 0,030 1,65 1,20 to 0,030 1,80 1,10 to 0,030 1,70 1,70 to 0,025 2,30 1,10 to 0,025 1,90 1,10 to 0,025 1,60
The total of all other non-listed elements (except Fe) shall not exceed 0,50 %. Single values shown in the table are maximum values. The results shall be rounded to the same number of significant figures as in the specified value using the rule A in accordance with Annex B of ISO 31-0:1992.
d.o.o.
Chemical and mechanical properties of weld metal Chemical and mechanical properties refer to typical values for test specimens, taken from all-weld metal material. They represent the average values from a large number of tests. Mechanical testing Test plate preparation and specimen location for all-weld testing are prepared according to EN and AWS norms. Two type of test specimen are prepared: cylindrical test pieces for tensile testing and square Charpy V test pieces for impact energy testing. The tensile test is used to determine: Tensile strength, Yield strength and Elongation. The impact test is used to determine: Fracture toughness properties The Tensile Strength is the maximum stress which the material under test can be subjected to before fracture occurs and is designated Rm and measured in units 2 N/mm . The Yield Strength is the applied stress at which the material under test starts to yield plastically, producing a permanent deformation after the load is removed. The catalogue values refer to a residual deformation of 0.2 % and are designated Rp 0.2% and 2 measured in units N/mm . The Elongation is a measurement of the weld metals ability to deform before fracture occurs. It is designated A5 and measured as a percentage of the original test specimen length, which is normally five times the specimen diameter. Impact energy Impact testing is used to determine weld metal toughness at a given temperature, under impact loading conditions, and is a measurement of the materials resistance to brittle fracture. Impact energy is determined using a V-Notch test specimen according to the Charpy-V method and is designated Av and measured in the unit joule (J).
The values in the brochure are just an orientation matter. They can be changed without any previous agreement.
d.o.o.
Brinellhardness HB 96 103 111 116 121 126 130 137 143 149 156 163 170 179 187 197 207 217 229 241 255 269
Rockwell- Rockwell- Vickershardness hardness hardness HRB HRC HV 53 58,2 64,0 67,0 70,0 72,4 74,8 77,2 79,5 81,7 84,1 85,4 88,2 90,4 92,2 94,2 96,2 97,8 99,6 101,0 103,0 105,0 19,0 21,2 23,8 26,0 96 103 111 116 121 126 131 137 143 149 156 163 170 179 187 197 207 217 229 241 255 269
Brinellhardness HB 285 302 321 341 363 388 415 444 478 541 555 600 611 622 632 643 654 665 676 688 694
Rockwell- Rockwell- Vickershardness hardness hardness HRB HRC HV 107,0 109,0 28,3 30,5 32,8 35,0 37,4 40,2 43,2 47,0 49,0 52,0 56,0 59,0 59,3 60,5 61,5 62,5 63,5 64,5 65,5 67,0 68,0 285 302 321 341 364 393 430 466 510 560 640 695 704 726 750 774 800 826 855 903 940
d.o.o.
Storage Coated electrodes should principally be kept in their original packing until use. The withdrawal of electrode packages form stock should be based on the first-in / first-out principle. In order to protect the electrodes against humidity, induced damage, they should be stored in a dry place, under climatically controlled conditions of 17-25C and a maximum relative humidity of 60%. Recommendable maximum storage time is 3 years. Re-drying Electrodes and fluxes need redying before use. The re-drying temperature of electrodes and fluxes are indicated on the labels of the electrode and flux packing and on the technical specification of the electrode. Electrodes in metal box packaging do not need redrying before use provided the original package is unbroken. No special storage climate control is necessary for these types. Cellulose-coated electrodes must principally not be re-drying. Electrodes, which exhibit poor arc stability, heavy spatter or difficult slag removal have probably been damaged by moisture pick-up and normal operability can be restored by redrying. For all types of electrodes we recommend after re-drying immediately prior to welding. Recommended is that basic coated and high alloyed electrodes and fluxes are during use stored in heating oven at temperatures between 70 and 120C. Packing Coated electrodes are supplied in two types of packing: cardboard box with shrink plastic wrapping for unalloyed, low and medium alloyed electrodes, metal box for high alloyed electrodes and cellulose coated electrodes. Weight of the cardboard box is between 4 6 kg and the metal box 3 4,5 kg, which depends from diameter of electrode. Boxes are packed into cardboard box (4 or 5 units together). Fluxes are packed into three-layer paper bag with plastic inserted piece. Weight is 25 kg. Wires and rods are packed: - welding rods for oxyacetilene-welding are packed into 25 kg binding, only diameter 1,6 mm is packed in cardboard boxes - high and low-alloyed TIG wires are packed in 5 kg - PVC bags, 5 such packets are put together in cardboard-package - welding wire is spooled on various spools type plastic or steel basket, each spool is packed in polyetilene bag and packed in cardboard box - welding wire could be delivered in drums (about 250 kg) - SAW wire is wounded on coil or spooled on basket spools (K 415 or K435) or on D760 spools (about 300 kg)
Notes:
d.o.o.
REDRYING TEMPERATURES
Temperature / time Temperature / time 100 C / 1h + 300 350 C / 2h or 400 C / 1 h or 250 C / 4 h
PRODUCT EVB Mo EVB MoV EVB Mo1Cr EVB CrMo EVB CrMoV EVB 2 CrMo EVB 5 CrMo EVB 9 CrMo EVB 9 CrMoV, EVB 91 CrMoV INOX R 19/9 Nb INOX R 19/9 NC INOX R 19/12/3 Nb INOX R 19/12/3 NC INOX R 19/13/4 L INOX R 22/9/3 LN INOX R 20/10/3 L INOX R 25/4 Fe INOX R 25/14 NC INOX R 25/14/3 NC INOX R 25/20 INOX R 20/25 L INOX R 22/12/3 Fe INOX R 18/8/6 Fe INOX R 29/9, INOX R 29/9 Fe INOX B 19/9Nb INOX B 19/12/3 Nb INOX B 25/20 INOX B 18/8/6 INOX B 70/15 INOX R 18/8/6 INOX B 13 Fe INOX B 13/1 Fe INOX B 13/4 Fe INOX B 13/6 Fe INOX B 17 Fe INOX B 17 MoFe UTOP 38 UTOP 55 TOOLDUR E DUR 250 E DUR 300 E DUR 400 E DUR 500 E DUR 600, E DUR 600 Si E DUR 60 R ABRADUR 54 ABRADUR 58 ABRADUR 64, ABRADUR 60 ABRADUR 65 ABRADUR 66 CrWC 600 E Mn14, E Mn14 Cr4 E Mn17 Cr13, E Mn17 Cr10 Nb3
NOT PERMITTED
NEUTRAL RAPID JADRAN S RUTILEN 12 RUTILEN Z RUTILEN 1000 S EMONA RUTILEN 13 RUTILEN X RUTILEN 2000 S RUTILEN K RUTILEN S E Ti Mo E Ti MoV E Ti CrMo E Ti 2 CrMo E Ti 5 CrMo SAVA 130 SAVA 150 SAVA 180 SAVA 200 SAVA GV 130 SAVA GV 160 SAVA 150 B SAVA 150 AR EVB 50 EVB 55 EVB 45 EVB 47 EVB S GALEB 50 EVB K EVB 60 EVB 65 EVB Ni EVB CuNi EVB CuNiCr EVB NiMo GALEB 70 EVB 2.5 Ni EVB 2.5 NiMo EVB 75 EVB CrNiMo EVB 80, EVB SP2 EVB 100, EVB 100 extra
20C100C300C ( 1h ) ( 1h )
400 C / 1 h or 250 C / 4h
300 C / 1 - 2 h or 250 C / 4 h
d.o.o.
REDRYING TEMPERATURES
Temperature / time ALU 99.5 ALU Mn ALU 5 Si ALU 12 Si SEKATOR 1 SEKATOR 2 A SEKATOR 2 B TERMO Temperature / Time 100-150 C / 12 h
PRODUCT MONEL SUPER Ni CAST Ni CAST NiFe, CAST NiFe B CAST NiFe10 CAST NiC CAST Fe SL 250, SL 9V EL Cu BRON CuSn BRON CuAl BRON CuMn AR 18.5 AR D1 AR 18.1 AB 100 AB Cr
PRODUCT
150 C / 2 - 3 h or 180 C / 1 h
NOT NECESSARY
300 C / 1 h or 200 C / 2 3 h 350 C / 2 h or 250 C / 4 h or 400 C / 1 h 350 C / 2 h or 250 C / 4 h or 400 C / 1 h FB TT FB 12.2 FB 33, FB CrNi FB 578 CS Cr 6 CS CrNi CS 350 350 C / 2 h or 250 C / 4 h or 400 C / 1 h 350 C / 2 h or 250 C / 4 h or 400 C / 1 h
Welding fluxes should be baked before use in shallow trays (less than 15 cm deep) at 350C / 2 h in an oven with free air circulation.
d.o.o.
WELDING SAFETY
Arc welding is a safe occupation when sufficient measures are taken to protect the welder from potential hazards. When these measures are overlooked or ignored, however, welders can encounter such dangers as electric shock, overexposure to arc radiation, fumes and gases, and fire and explosion; any of which may result in fatal injuries. Arc welding can be hazardous. Protect yourself and others from possible serious injury or death. Be sure that all installation, operation, maintenance and repair procedures are performed only by qualified individuals.
Hazard
Factors to Consider
Precaution Summary
Insulate welder from workpiece and ground using dry insulation. Rubber mat or dry wood. Wear dry, hole-free gloves. (Change as necessary to keep dry.) Do not touch electrically "hot" parts or electrode with bare skin or wet clothing. If wet area and welder cannot be insulated from workpiece with dry insulation, use a semiautomatic, constant-voltage welder or stick welder with voltage reducing device. Keep electrode holder and cable insulation in good condition. Do not use if insulation is damaged or missing.
Wetness Welder in or on workpiece Confined space Electrode holder and cable insulation
Use ventilation or exhaust to keep air breathing zone clear, comfortable. Use helmet and positioning of head to minimize fume in breathing zone. Read warnings on electrode container and material safety data sheet (MSDS) for electrode. Provide additional ventilation/exhaust where special ventilation requirements exist. Use special care when welding in a confined area. Do not weld unless ventilation is adequate.
d.o.o.
WELDING SAFETY
Hazard
Factors to Consider
Precaution Summary
Do not weld on containers which have held combustible materials (unless strict AWS F4.1 procedures are followed). Check before welding. Remove flammable materials from welding area or shield from sparks, heat. Keep a fire watch in area during and after welding. Keep a fire extinguisher in the welding area. Wear fire retardant clothing and hat. Use earplugs when welding overhead.
Select a filter lens which is comfortable for you while welding. Always use helmet when welding. Provide non-flammable shielding to protect others. Wear clothing which protects skin while welding.
Confined space
Metal enclosure Wetness Restricted entry Heavier than air gas Welder inside or on workpiece
Carefully evaluate adequacy of ventilation especially where electrode requires special ventilation or where gas may displace breathing air. If basic electric shock precautions cannot be followed to insulate welder from work and electrode, use semiautomatic, constantvoltage equipment with cold electrode or stick welder with voltage reducing device. Provide welder helper and method of welder retrieval from outside enclosure.
d.o.o.
WELDING SAFETY
Hazard
Factors to Consider
Precaution Summary
Cluttered area
Connect work cable as close as possible to area where welding is being performed. Do not allow alternate circuits through scaffold cables, hoist chains, or ground leads.
Electrical equipment
Use only double insulated or properly grounded equipment. Always disconnect power to equipment before servicing.
Engine-driven equipment
Only use in open, well ventilated areas. Keep enclosure complete and guards in place. See Lincoln service shop if guards are missing. Turn off engine before refueling. If using auxiliary power, OSHA may require GFI protection or assured grounding program (or isolated windings if less than 5KW).
Gas cylinders
Never touch cylinder with the electrode. Never lift a machine with cylinder attached. Keep cylinder upright and chained to support.
d.o.o.
Hazardous substances in welding and allied processes are respirable air polluting substances generated by welding, cutting and allied processes, which at an intolerable concentration may be injurious to health. In the accident prevention regulation Welding, cutting and allied processes (VBG 15), they are expressed by the term substances hazardous to health and are regarded as hazardous substances (Gefahrstoffen) within the meaning of the hazardous substances ordinance (Gefahrstoffverordnung - GefStoffV). Hazardous substances can be classified with respect to their occurrence and effects. They are generated by welding and allied processes in the form of gasses and/or particles. Particulate substances are dispersed as minute solid particles in the air. The following fractions are distinguished on the basis of particle size for all particles present in the air (according to DIN EN 481): - Inhalable fraction (total dust) the fraction of particles which is inhaled through the mouth and nose into the body (particle sizes up to 100 m) - Respirable fraction (fine dust) the fraction of particles capable of penetrating into the alveoli air sacs (particle size up to 10 m) Airborne particles generated by welding are very small. In general, they have a diameter of less than 1 m (in most cases less than 0,1 m), are therefore respirable and called welding fume. In welding, hazardous substances always occur in the form of mixtures of substance. The determination of these limit values is therefore very complicated. This is why, in practice, specific key components related to process- and welding material are often use. Limit values for mixtures of substances have to be determined according to TRGS 403 Assessement of mixtures of substances in the workplace atmosphere (Bewertung von Stoffgemischen in der Luft am Arbeitsplatz). Gaseous and particulate substances generated by welding, cutting and allied processes can be classified according to their effects on different organs of the human body as follows: - lung stressing (inert substances) long-term intake of high concentrations leads to a restricted lung function which is due to a decrease in the exchange of oxygen, due to dust deposited in the lung. These dust deposits are generally not pathogenic, they are reversible. This substances are for example: Fe-oxides, Al-oxides. - toxic (poisonous) substances have a toxic effect on the human body, if a certain dose (=amount per unit weight of the body) is exceeded. This is a dose-effect-relationship. Slight poisoning leads to mild health disorders; high concentrations of these substance in the inhaled air may cause very serious poisoning which results in death. This substances are for example: CO, NO, NO2, O3, metal-oxides such as Cu, Pb, Zn in form of fume and dust. - carcinogenic (cancer-causing) substances are substances which are known to cause malignant tumors. The risk of cancer normally depends on a number of factors, e.g. genetic predisposition, environmental pollution. There is no inevitability about the effect but the risk of cancer is greater as the dose increases. The latent period may last for years or decades. This substances are for example: Cr VI-compounds, Ni-oxide, Co-oxide, Cd-oxide, Be-oxide, formaldehyde. Hazardous substances generated by welding and allied processes arise from: filler materials, parent materials, shielding gases, coatings, contamination, ambient air, and at high temperature (of the arc or flame) by physical and/or chemical processes such as: evaporation, condensation, oxidation, decomposition, pyrolysis, combustion. The type and amount of the hazardous substances generated depend on the material and the process. The chemical composition of the materials used has a direct influence on the chemical composition of the particulate hazardous substances. The processes in use affect the generation of gaseous hazardous substances. The amount and kind of hazardous substances are also influenced apart from the processes and materials used by surface coatings and contamination as well as by the following factors: current (voltage), type of current (ac/dc), diameter of electrode, type of coating, inclination angle of the electrode, type of welding.
d.o.o.
Health effects are acute and cronic. Acute, short term effects of the inhalation of the various components of welding fumes and gases can generally be related to a particular process and exposure. Such effects are well documented (metal fume fever, caused by inhalation of zinc oxide fumes, copper, aluminium, magnesium, exposure to ozone, to nitrogen oxides). Chronic, log term effects have, however, received less attention because of the confounding effects due to population dynamics, for example, job mobility, and from the masking of welding-related health effects by other factors such as cigarette smoking. These effects are on respiratory system (various components of welding fumes), nervous system (welding fume components, lead, manganese), cardiovascular system (carbon monoxide), skindermatitis (chromium VI-compounds), carcinogenic effects (chromium VI, nickel, ozone are suspect carcinogen).The particulate form of fume may be carcinogenic, but no definitive human or animal study results are available. Technical protective measures should be taken (singly or in combination) to minimise health hazards due to the welders exposure at the workplace (choice of low fume emission processes, choice of low emission materials, optimisation of working conditions, technical safety devices, ventilation). Personal protective equipment is intended to protect the welder directly and, in many cases, to be a necessary supplement to the technical protective measures (welders hand and face shields, respiratory protective equipment). Warning: Protect yourself and others! Take precautions when welding. Ask for your employers safety practices which should be based on manufacturers hazard data. Keep exposure as low as possible when welding and cutting! FUME and GASES can be dangerous to your health. Do not breathe fumes and gases! Keep your head out of the fumes! Use enough ventilation or exhaust at the arc or both to keep fumes and gases from your breathing zone and general area! If ventilation is questionable, use air sampling to determine the need for corrective measures! ARC RAYS can injure eyes and burn skin. Protect your eyes from welding light by wearing a welders helmet fitted with a filter shade that is suitable for the type of welding you are doing. ALWAYS wear safety glasses with side shields or goggles when chipping or grinding a work piece if you are not wearing a welding helmet. Wear tightly woven work-weight fabrics to keep UV radiation from reaching your skin; cover your head. Use enough ventilation, wear correct eye, ear and body protection! Sources: BG Arbeitsgemeinschaft der Metall-Berufsgenossenschaften