Professional Documents
Culture Documents
Section 7 - Repair/Replacement Procedures
Section 7 - Repair/Replacement Procedures
INTRODUCTION
Repair procedures are limited to module replacement. If an INFI-NET to computer interface module fails, remove and replace it with another. Verify that the replacement module dipswitch and jumper settings are the same as those of the failed module.
NOTE: Do not remove INICT01 and INICT03 modules under power unless the stop (INICT01) or stop/reset (INICT03) pushbutton has been depressed and module operation has been halted.
I-E96-610A
INTRODUCTION 7-1
REPAIR/REPLACEMENT PROCEDURES
NTCL01 Communication Termination Unit. NICL01 Communication Termination Module. NTMF01 Multi-Function Controller Termination Unit. NIMF01 and NIMF02 Multi-Function Controller Termination Modules. NTMP01 Multi-Function Processor Termination Unit. NIMP01 and NIMP02 Multi-Function Processor Termination Modules.
I-E96-610A